[SCSI] bfa: Brocade-1860 Fabric Adapter Hardware Enablement
- Added support for Brocade-1860 Fabric Adapter.
- Made changes to support single firmware image per asic type.
- Combined bfi_cbreg.h and bfi_ctreg.h defines into bfi_reg.h with
only minimal defines used by host.
- Added changes to setup CPE/RME Queue register offsets based on
firmware response.
- Removed queue register offset initializations and added register offsets
to BFI config response message.
- Added Brocade-1860 asic specific interrupt status definitions and
mailbox interfaces.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index dd2aad9..c9c8e8d 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -68,11 +68,24 @@
u8 rsvd[7];
};
+/**
+ * Queue configuration response from firmware
+ */
+struct bfi_iocfc_qreg_s {
+ u32 cpe_q_ci_off[BFI_IOC_MAX_CQS];
+ u32 cpe_q_pi_off[BFI_IOC_MAX_CQS];
+ u32 cpe_qctl_off[BFI_IOC_MAX_CQS];
+ u32 rme_q_ci_off[BFI_IOC_MAX_CQS];
+ u32 rme_q_pi_off[BFI_IOC_MAX_CQS];
+ u32 rme_qctl_off[BFI_IOC_MAX_CQS];
+};
+
struct bfi_iocfc_cfgrsp_s {
struct bfa_iocfc_fwcfg_s fwcfg;
struct bfa_iocfc_intr_attr_s intr_attr;
struct bfi_iocfc_bootwwns bootwwns;
struct bfi_pbc_s pbc_cfg;
+ struct bfi_iocfc_qreg_s qreg;
};
/*
@@ -772,4 +785,27 @@
#pragma pack()
+/*
+ * Crossbow PCI MSI-X vector defines
+ */
+enum {
+ BFI_MSIX_CPE_QMIN_CB = 0,
+ BFI_MSIX_CPE_QMAX_CB = 7,
+ BFI_MSIX_RME_QMIN_CB = 8,
+ BFI_MSIX_RME_QMAX_CB = 15,
+ BFI_MSIX_CB_MAX = 22,
+};
+
+/*
+ * Catapult FC PCI MSI-X vector defines
+ */
+enum {
+ BFI_MSIX_LPU_ERR_CT = 0,
+ BFI_MSIX_CPE_QMIN_CT = 1,
+ BFI_MSIX_CPE_QMAX_CT = 4,
+ BFI_MSIX_RME_QMIN_CT = 5,
+ BFI_MSIX_RME_QMAX_CT = 8,
+ BFI_MSIX_CT_MAX = 9,
+};
+
#endif /* __BFI_MS_H__ */
