// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <19200000>;
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <32768>;
		};
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		CPU0: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x100>;
			enable-method = "psci";
			cpu-idle-states = <&CPU_SLEEP_0>;
			next-level-cache = <&L2_0>;
			#cooling-cells = <2>;
			clocks = <&apcs_glb>;
			operating-points-v2 = <&cpu_opp_table>;
			power-domains = <&cpr>;
			power-domain-names = "cpr";
		};

		CPU1: cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x101>;
			enable-method = "psci";
			cpu-idle-states = <&CPU_SLEEP_0>;
			next-level-cache = <&L2_0>;
			#cooling-cells = <2>;
			clocks = <&apcs_glb>;
			operating-points-v2 = <&cpu_opp_table>;
			power-domains = <&cpr>;
			power-domain-names = "cpr";
		};

		CPU2: cpu@102 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x102>;
			enable-method = "psci";
			cpu-idle-states = <&CPU_SLEEP_0>;
			next-level-cache = <&L2_0>;
			#cooling-cells = <2>;
			clocks = <&apcs_glb>;
			operating-points-v2 = <&cpu_opp_table>;
			power-domains = <&cpr>;
			power-domain-names = "cpr";
		};

		CPU3: cpu@103 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x103>;
			enable-method = "psci";
			cpu-idle-states = <&CPU_SLEEP_0>;
			next-level-cache = <&L2_0>;
			#cooling-cells = <2>;
			clocks = <&apcs_glb>;
			operating-points-v2 = <&cpu_opp_table>;
			power-domains = <&cpr>;
			power-domain-names = "cpr";
		};

		L2_0: l2-cache {
			compatible = "cache";
			cache-level = <2>;
		};

		idle-states {
			entry-method = "psci";

			CPU_SLEEP_0: cpu-sleep-0 {
				compatible = "arm,idle-state";
				idle-state-name = "standalone-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <125>;
				exit-latency-us = <180>;
				min-residency-us = <595>;
				local-timer-stop;
			};
		};
	};

	cpu_opp_table: cpu-opp-table {
		compatible = "operating-points-v2-kryo-cpu";
		opp-shared;

		opp-1094400000 {
			opp-hz = /bits/ 64 <1094400000>;
			required-opps = <&cpr_opp1>;
		};
		opp-1248000000 {
			opp-hz = /bits/ 64 <1248000000>;
			required-opps = <&cpr_opp2>;
		};
		opp-1401600000 {
			opp-hz = /bits/ 64 <1401600000>;
			required-opps = <&cpr_opp3>;
		};
	};

	cpr_opp_table: cpr-opp-table {
		compatible = "operating-points-v2-qcom-level";

		cpr_opp1: opp1 {
			opp-level = <1>;
			qcom,opp-fuse-level = <1>;
		};
		cpr_opp2: opp2 {
			opp-level = <2>;
			qcom,opp-fuse-level = <2>;
		};
		cpr_opp3: opp3 {
			opp-level = <3>;
			qcom,opp-fuse-level = <3>;
		};
	};

	firmware {
		scm: scm {
			compatible = "qcom,scm-qcs404", "qcom,scm";
			#reset-cells = <1>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0 0x80000000 0 0>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		tz_apps_mem: memory@85900000 {
			reg = <0 0x85900000 0 0x500000>;
			no-map;
		};

		xbl_mem: memory@85e00000 {
			reg = <0 0x85e00000 0 0x100000>;
			no-map;
		};

		smem_region: memory@85f00000 {
			reg = <0 0x85f00000 0 0x200000>;
			no-map;
		};

		tz_mem: memory@86100000 {
			reg = <0 0x86100000 0 0x300000>;
			no-map;
		};

		wlan_fw_mem: memory@86400000 {
			reg = <0 0x86400000 0 0x1100000>;
			no-map;
		};

		adsp_fw_mem: memory@87500000 {
			reg = <0 0x87500000 0 0x1a00000>;
			no-map;
		};

		cdsp_fw_mem: memory@88f00000 {
			reg = <0 0x88f00000 0 0x600000>;
			no-map;
		};

		wlan_msa_mem: memory@89500000 {
			reg = <0 0x89500000 0 0x100000>;
			no-map;
		};

		uefi_mem: memory@9f800000 {
			reg = <0 0x9f800000 0 0x800000>;
			no-map;
		};
	};

	rpm-glink {
		compatible = "qcom,glink-rpm";

		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
		qcom,rpm-msg-ram = <&rpm_msg_ram>;
		mboxes = <&apcs_glb 0>;

		rpm_requests: glink-channel {
			compatible = "qcom,rpm-qcs404";
			qcom,glink-channels = "rpm_requests";

			rpmcc: clock-controller {
				compatible = "qcom,rpmcc-qcs404";
				#clock-cells = <1>;
			};

			rpmpd: power-controller {
				compatible = "qcom,qcs404-rpmpd";
				#power-domain-cells = <1>;
				operating-points-v2 = <&rpmpd_opp_table>;

				rpmpd_opp_table: opp-table {
					compatible = "operating-points-v2";

					rpmpd_opp_ret: opp1 {
						opp-level = <16>;
					};

					rpmpd_opp_ret_plus: opp2 {
						opp-level = <32>;
					};

					rpmpd_opp_min_svs: opp3 {
						opp-level = <48>;
					};

					rpmpd_opp_low_svs: opp4 {
						opp-level = <64>;
					};

					rpmpd_opp_svs: opp5 {
						opp-level = <128>;
					};

					rpmpd_opp_svs_plus: opp6 {
						opp-level = <192>;
					};

					rpmpd_opp_nom: opp7 {
						opp-level = <256>;
					};

					rpmpd_opp_nom_plus: opp8 {
						opp-level = <320>;
					};

					rpmpd_opp_turbo: opp9 {
						opp-level = <384>;
					};

					rpmpd_opp_turbo_no_cpr: opp10 {
						opp-level = <416>;
					};

					rpmpd_opp_turbo_plus: opp11 {
						opp-level = <512>;
					};
				};
			};
		};
	};

	smem {
		compatible = "qcom,smem";

		memory-region = <&smem_region>;
		qcom,rpm-msg-ram = <&rpm_msg_ram>;

		hwlocks = <&tcsr_mutex 3>;
	};

	tcsr_mutex: hwlock {
		compatible = "qcom,tcsr-mutex";
		syscon = <&tcsr_mutex_regs 0 0x1000>;
		#hwlock-cells = <1>;
	};

	soc: soc@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;
		compatible = "simple-bus";

		turingcc: clock-controller@800000 {
			compatible = "qcom,qcs404-turingcc";
			reg = <0x00800000 0x30000>;
			clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;

			#clock-cells = <1>;
			#reset-cells = <1>;

			status = "disabled";
		};

		rpm_msg_ram: sram@60000 {
			compatible = "qcom,rpm-msg-ram";
			reg = <0x00060000 0x6000>;
		};

		usb3_phy: phy@78000 {
			compatible = "qcom,usb-ss-28nm-phy";
			reg = <0x00078000 0x400>;
			#phy-cells = <0>;
			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
			clock-names = "ref", "ahb", "pipe";
			resets = <&gcc GCC_USB3_PHY_BCR>,
				 <&gcc GCC_USB3PHY_PHY_BCR>;
			reset-names = "com", "phy";
			status = "disabled";
		};

		usb2_phy_prim: phy@7a000 {
			compatible = "qcom,usb-hs-28nm-femtophy";
			reg = <0x0007a000 0x200>;
			#phy-cells = <0>;
			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
			clock-names = "ref", "ahb", "sleep";
			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
				 <&gcc GCC_USB2A_PHY_BCR>;
			reset-names = "phy", "por";
			status = "disabled";
		};

		usb2_phy_sec: phy@7c000 {
			compatible = "qcom,usb-hs-28nm-femtophy";
			reg = <0x0007c000 0x200>;
			#phy-cells = <0>;
			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
			clock-names = "ref", "ahb", "sleep";
			resets = <&gcc GCC_QUSB2_PHY_BCR>,
				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
			reset-names = "phy", "por";
			status = "disabled";
		};

		qfprom: qfprom@a4000 {
			compatible = "qcom,qfprom";
			reg = <0x000a4000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;
			tsens_caldata: caldata@d0 {
				reg = <0x1f8 0x14>;
			};
			cpr_efuse_speedbin: speedbin@13c {
				reg = <0x13c 0x4>;
				bits = <2 3>;
			};
			cpr_efuse_quot_offset1: qoffset1@231 {
				reg = <0x231 0x4>;
				bits = <4 7>;
			};
			cpr_efuse_quot_offset2: qoffset2@232 {
				reg = <0x232 0x4>;
				bits = <3 7>;
			};
			cpr_efuse_quot_offset3: qoffset3@233 {
				reg = <0x233 0x4>;
				bits = <2 7>;
			};
			cpr_efuse_init_voltage1: ivoltage1@229 {
				reg = <0x229 0x4>;
				bits = <4 6>;
			};
			cpr_efuse_init_voltage2: ivoltage2@22a {
				reg = <0x22a 0x4>;
				bits = <2 6>;
			};
			cpr_efuse_init_voltage3: ivoltage3@22b {
				reg = <0x22b 0x4>;
				bits = <0 6>;
			};
			cpr_efuse_quot1: quot1@22b {
				reg = <0x22b 0x4>;
				bits = <6 12>;
			};
			cpr_efuse_quot2: quot2@22d {
				reg = <0x22d 0x4>;
				bits = <2 12>;
			};
			cpr_efuse_quot3: quot3@230 {
				reg = <0x230 0x4>;
				bits = <0 12>;
			};
			cpr_efuse_ring1: ring1@228 {
				reg = <0x228 0x4>;
				bits = <0 3>;
			};
			cpr_efuse_ring2: ring2@228 {
				reg = <0x228 0x4>;
				bits = <4 3>;
			};
			cpr_efuse_ring3: ring3@229 {
				reg = <0x229 0x4>;
				bits = <0 3>;
			};
			cpr_efuse_revision: revision@218 {
				reg = <0x218 0x4>;
				bits = <3 3>;
			};
		};

		rng: rng@e3000 {
			compatible = "qcom,prng-ee";
			reg = <0x000e3000 0x1000>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
		};

		bimc: interconnect@400000 {
			reg = <0x00400000 0x80000>;
			compatible = "qcom,qcs404-bimc";
			#interconnect-cells = <1>;
			clock-names = "bus", "bus_a";
			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
				<&rpmcc RPM_SMD_BIMC_A_CLK>;
		};

		tsens: thermal-sensor@4a9000 {
			compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
			reg = <0x004a9000 0x1000>, /* TM */
			      <0x004a8000 0x1000>; /* SROT */
			nvmem-cells = <&tsens_caldata>;
			nvmem-cell-names = "calib";
			#qcom,sensors = <10>;
			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow";
			#thermal-sensor-cells = <1>;
		};

		pcnoc: interconnect@500000 {
			reg = <0x00500000 0x15080>;
			compatible = "qcom,qcs404-pcnoc";
			#interconnect-cells = <1>;
			clock-names = "bus", "bus_a";
			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
				<&rpmcc RPM_SMD_PNOC_A_CLK>;
		};

		snoc: interconnect@580000 {
			reg = <0x00580000 0x23080>;
			compatible = "qcom,qcs404-snoc";
			#interconnect-cells = <1>;
			clock-names = "bus", "bus_a";
			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
				<&rpmcc RPM_SMD_SNOC_A_CLK>;
		};

		remoteproc_cdsp: remoteproc@b00000 {
			compatible = "qcom,qcs404-cdsp-pas";
			reg = <0x00b00000 0x4040>;

			interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready",
					  "handover", "stop-ack";

			clocks = <&xo_board>,
				 <&gcc GCC_CDSP_CFG_AHB_CLK>,
				 <&gcc GCC_CDSP_TBU_CLK>,
				 <&gcc GCC_BIMC_CDSP_CLK>,
				 <&turingcc TURING_WRAPPER_AON_CLK>,
				 <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
				 <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
				 <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
			clock-names = "xo",
				      "sway",
				      "tbu",
				      "bimc",
				      "ahb_aon",
				      "q6ss_slave",
				      "q6ss_master",
				      "q6_axim";

			resets = <&gcc GCC_CDSP_RESTART>;
			reset-names = "restart";

			qcom,halt-regs = <&tcsr 0x19004>;

			memory-region = <&cdsp_fw_mem>;

			qcom,smem-states = <&cdsp_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;

				qcom,remote-pid = <5>;
				mboxes = <&apcs_glb 12>;

				label = "cdsp";
			};
		};

		usb3: usb@7678800 {
			compatible = "qcom,dwc3";
			reg = <0x07678800 0x400>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			clocks = <&gcc GCC_USB30_MASTER_CLK>,
				 <&gcc GCC_SYS_NOC_USB3_CLK>,
				 <&gcc GCC_USB30_SLEEP_CLK>,
				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
			clock-names = "core", "iface", "sleep", "mock_utmi";
			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_MASTER_CLK>;
			assigned-clock-rates = <19200000>, <200000000>;
			status = "disabled";

			dwc3@7580000 {
				compatible = "snps,dwc3";
				reg = <0x07580000 0xcd00>;
				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&usb2_phy_sec>, <&usb3_phy>;
				phy-names = "usb2-phy", "usb3-phy";
				snps,has-lpm-erratum;
				snps,hird-threshold = /bits/ 8 <0x10>;
				snps,usb3_lpm_capable;
				dr_mode = "otg";
			};
		};

		usb2: usb@79b8800 {
			compatible = "qcom,dwc3";
			reg = <0x079b8800 0x400>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
				 <&gcc GCC_PCNOC_USB2_CLK>,
				 <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
			clock-names = "core", "iface", "sleep", "mock_utmi";
			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
			assigned-clock-rates = <19200000>, <133333333>;
			status = "disabled";

			dwc3@78c0000 {
				compatible = "snps,dwc3";
				reg = <0x078c0000 0xcc00>;
				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&usb2_phy_prim>;
				phy-names = "usb2-phy";
				snps,has-lpm-erratum;
				snps,hird-threshold = /bits/ 8 <0x10>;
				snps,usb3_lpm_capable;
				dr_mode = "peripheral";
			};
		};

		tlmm: pinctrl@1000000 {
			compatible = "qcom,qcs404-pinctrl";
			reg = <0x01000000 0x200000>,
			      <0x01300000 0x200000>,
			      <0x07b00000 0x200000>;
			reg-names = "south", "north", "east";
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-ranges = <&tlmm 0 0 120>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;

			blsp1_i2c0_default: blsp1-i2c0-default {
				pins = "gpio32", "gpio33";
				function = "blsp_i2c0";
			};

			blsp1_i2c1_default: blsp1-i2c1-default {
				pins = "gpio24", "gpio25";
				function = "blsp_i2c1";
			};

			blsp1_i2c2_default: blsp1-i2c2-default {
				sda {
					pins = "gpio19";
					function = "blsp_i2c_sda_a2";
				};

				scl {
					pins = "gpio20";
					function = "blsp_i2c_scl_a2";
				};
			};

			blsp1_i2c3_default: blsp1-i2c3-default {
				pins = "gpio84", "gpio85";
				function = "blsp_i2c3";
			};

			blsp1_i2c4_default: blsp1-i2c4-default {
				pins = "gpio117", "gpio118";
				function = "blsp_i2c4";
			};

			blsp1_uart0_default: blsp1-uart0-default {
				pins = "gpio30", "gpio31", "gpio32", "gpio33";
				function = "blsp_uart0";
			};

			blsp1_uart1_default: blsp1-uart1-default {
				pins = "gpio22", "gpio23";
				function = "blsp_uart1";
			};

			blsp1_uart2_default: blsp1-uart2-default {
				rx {
					pins = "gpio18";
					function = "blsp_uart_rx_a2";
				};

				tx {
					pins = "gpio17";
					function = "blsp_uart_tx_a2";
				};
			};

			blsp1_uart3_default: blsp1-uart3-default {
				pins = "gpio82", "gpio83", "gpio84", "gpio85";
				function = "blsp_uart3";
			};

			blsp2_i2c0_default: blsp2-i2c0-default {
				pins = "gpio28", "gpio29";
				function = "blsp_i2c5";
			};

			blsp1_spi0_default: blsp1-spi0-default {
				pins = "gpio30", "gpio31", "gpio32", "gpio33";
				function = "blsp_spi0";
			};

			blsp1_spi1_default: blsp1-spi1-default {
				pins = "gpio22", "gpio23", "gpio24", "gpio25";
				function = "blsp_spi1";
			};

			blsp1_spi2_default: blsp1-spi2-default {
				pins = "gpio17", "gpio18", "gpio19", "gpio20";
				function = "blsp_spi2";
			};

			blsp1_spi3_default: blsp1-spi3-default {
				pins = "gpio82", "gpio83", "gpio84", "gpio85";
				function = "blsp_spi3";
			};

			blsp1_spi4_default: blsp1-spi4-default {
				pins = "gpio37", "gpio38", "gpio117", "gpio118";
				function = "blsp_spi4";
			};

			blsp2_spi0_default: blsp2-spi0-default {
				pins = "gpio26", "gpio27", "gpio28", "gpio29";
				function = "blsp_spi5";
			};

			blsp2_uart0_default: blsp2-uart0-default {
				pins = "gpio26", "gpio27", "gpio28", "gpio29";
				function = "blsp_uart5";
			};
		};

		gcc: clock-controller@1800000 {
			compatible = "qcom,gcc-qcs404";
			reg = <0x01800000 0x80000>;
			#clock-cells = <1>;
			#reset-cells = <1>;

			assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
			assigned-clock-rates = <19200000>;
		};

		tcsr_mutex_regs: syscon@1905000 {
			compatible = "syscon";
			reg = <0x01905000 0x20000>;
		};

		tcsr: syscon@1937000 {
			compatible = "syscon";
			reg = <0x01937000 0x25000>;
		};

		sram@290000 {
			compatible = "qcom,rpm-stats";
			reg = <0x00290000 0x10000>;
		};

		spmi_bus: spmi@200f000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0x0200f000 0x001000>,
			      <0x02400000 0x800000>,
			      <0x02c00000 0x800000>,
			      <0x03800000 0x200000>,
			      <0x0200a000 0x002100>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupt-names = "periph_irq";
			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};

		remoteproc_wcss: remoteproc@7400000 {
			compatible = "qcom,qcs404-wcss-pas";
			reg = <0x07400000 0x4040>;

			interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
					      <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready",
					  "handover", "stop-ack";

			clocks = <&xo_board>;
			clock-names = "xo";

			memory-region = <&wlan_fw_mem>;

			qcom,smem-states = <&wcss_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;

				qcom,remote-pid = <1>;
				mboxes = <&apcs_glb 16>;

				label = "wcss";
			};
		};

		pcie_phy: phy@7786000 {
			compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
			reg = <0x07786000 0xb8>;

			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
				 <&gcc 21>;
			reset-names = "phy", "pipe";

			clock-output-names = "pcie_0_pipe_clk";
			#phy-cells = <0>;

			status = "disabled";
		};

		sdcc1: sdcc@7804000 {
			compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
			reg-names = "hc", "cqhci";

			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
				 <&gcc GCC_SDCC1_AHB_CLK>,
				 <&xo_board>;
			clock-names = "core", "iface", "xo";

			status = "disabled";
		};

		blsp1_dma: dma-controller@7884000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07884000 0x25000>;
			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
			status = "okay";
		};

		blsp1_uart0: serial@78af000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078af000 0x200>;
			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 1>, <&blsp1_dma 0>;
			dma-names = "rx", "tx";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_uart0_default>;
			status = "disabled";
		};

		blsp1_uart1: serial@78b0000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b0000 0x200>;
			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 3>, <&blsp1_dma 2>;
			dma-names = "rx", "tx";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_uart1_default>;
			status = "disabled";
		};

		blsp1_uart2: serial@78b1000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b1000 0x200>;
			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 5>, <&blsp1_dma 4>;
			dma-names = "rx", "tx";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_uart2_default>;
			status = "okay";
		};

		ethernet: ethernet@7a80000 {
			compatible = "qcom,qcs404-ethqos";
			reg = <0x07a80000 0x10000>,
				<0x07a96000 0x100>;
			reg-names = "stmmaceth", "rgmii";
			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
			clocks = <&gcc GCC_ETH_AXI_CLK>,
				<&gcc GCC_ETH_SLAVE_AHB_CLK>,
				<&gcc GCC_ETH_PTP_CLK>,
				<&gcc GCC_ETH_RGMII_CLK>;
			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "macirq", "eth_lpi";

			snps,tso;
			rx-fifo-depth = <4096>;
			tx-fifo-depth = <4096>;

			status = "disabled";
		};

		wifi: wifi@a000000 {
			compatible = "qcom,wcn3990-wifi";
			reg = <0xa000000 0x800000>;
			reg-names = "membase";
			memory-region = <&wlan_msa_mem>;
			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		blsp1_uart3: serial@78b2000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b2000 0x200>;
			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 7>, <&blsp1_dma 6>;
			dma-names = "rx", "tx";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_uart3_default>;
			status = "disabled";
		};

		blsp1_i2c0: i2c@78b5000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b5000 0x600>;
			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_i2c0_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_spi0: spi@78b5000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x078b5000 0x600>;
			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_spi0_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c1: i2c@78b6000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b6000 0x600>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_i2c1_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_spi1: spi@78b6000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x078b6000 0x600>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_spi1_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c2: i2c@78b7000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b7000 0x600>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_i2c2_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_spi2: spi@78b7000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x078b7000 0x600>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_spi2_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c3: i2c@78b8000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b8000 0x600>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_i2c3_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_spi3: spi@78b8000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x078b8000 0x600>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_spi3_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c4: i2c@78b9000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b9000 0x600>;
			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_i2c4_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_spi4: spi@78b9000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x078b9000 0x600>;
			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
				 <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_spi4_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp2_dma: dma-controller@7ac4000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07ac4000 0x17000>;
			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
			status = "disabled";
		};

		blsp2_uart0: serial@7aef000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x07aef000 0x200>;
			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp2_dma 1>, <&blsp2_dma 0>;
			dma-names = "rx", "tx";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp2_uart0_default>;
			status = "disabled";
		};

		blsp2_i2c0: i2c@7af5000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x07af5000 0x600>;
			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
				 <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp2_i2c0_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp2_spi0: spi@7af5000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x07af5000 0x600>;
			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
				 <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>;
			clock-names = "iface", "core";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp2_spi0_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		imem@8600000 {
			compatible = "simple-mfd";
			reg = <0x08600000 0x1000>;

			#address-cells = <1>;
			#size-cells = <1>;

			ranges = <0 0x08600000 0x1000>;

			pil-reloc@94c {
				compatible = "qcom,pil-reloc-info";
				reg = <0x94c 0xc8>;
			};
		};

		intc: interrupt-controller@b000000 {
			compatible = "qcom,msm-qgic2";
			interrupt-controller;
			#interrupt-cells = <3>;
			reg = <0x0b000000 0x1000>,
			      <0x0b002000 0x1000>;
		};

		apcs_glb: mailbox@b011000 {
			compatible = "qcom,qcs404-apcs-apps-global", "syscon";
			reg = <0x0b011000 0x1000>;
			#mbox-cells = <1>;
			clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
			clock-names = "pll", "aux";
			#clock-cells = <0>;
		};

		apcs_hfpll: clock-controller@b016000 {
			compatible = "qcom,hfpll";
			reg = <0x0b016000 0x30>;
			#clock-cells = <0>;
			clock-output-names = "apcs_hfpll";
			clocks = <&xo_board>;
			clock-names = "xo";
		};

		watchdog@b017000 {
			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
			reg = <0x0b017000 0x1000>;
			clocks = <&sleep_clk>;
		};

		cpr: power-controller@b018000 {
			compatible = "qcom,qcs404-cpr", "qcom,cpr";
			reg = <0x0b018000 0x1000>;
			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
			clocks = <&xo_board>;
			clock-names = "ref";
			vdd-apc-supply = <&pms405_s3>;
			#power-domain-cells = <0>;
			operating-points-v2 = <&cpr_opp_table>;
			acc-syscon = <&tcsr>;

			nvmem-cells = <&cpr_efuse_quot_offset1>,
				<&cpr_efuse_quot_offset2>,
				<&cpr_efuse_quot_offset3>,
				<&cpr_efuse_init_voltage1>,
				<&cpr_efuse_init_voltage2>,
				<&cpr_efuse_init_voltage3>,
				<&cpr_efuse_quot1>,
				<&cpr_efuse_quot2>,
				<&cpr_efuse_quot3>,
				<&cpr_efuse_ring1>,
				<&cpr_efuse_ring2>,
				<&cpr_efuse_ring3>,
				<&cpr_efuse_revision>;
			nvmem-cell-names = "cpr_quotient_offset1",
				"cpr_quotient_offset2",
				"cpr_quotient_offset3",
				"cpr_init_voltage1",
				"cpr_init_voltage2",
				"cpr_init_voltage3",
				"cpr_quotient1",
				"cpr_quotient2",
				"cpr_quotient3",
				"cpr_ring_osc1",
				"cpr_ring_osc2",
				"cpr_ring_osc3",
				"cpr_fuse_revision";
		};

		timer@b120000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			compatible = "arm,armv7-timer-mem";
			reg = <0x0b120000 0x1000>;
			clock-frequency = <19200000>;

			frame@b121000 {
				frame-number = <0>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b121000 0x1000>,
				      <0x0b122000 0x1000>;
			};

			frame@b123000 {
				frame-number = <1>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b123000 0x1000>;
				status = "disabled";
			};

			frame@b124000 {
				frame-number = <2>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b124000 0x1000>;
				status = "disabled";
			};

			frame@b125000 {
				frame-number = <3>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b125000 0x1000>;
				status = "disabled";
			};

			frame@b126000 {
				frame-number = <4>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b126000 0x1000>;
				status = "disabled";
			};

			frame@b127000 {
				frame-number = <5>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0xb127000 0x1000>;
				status = "disabled";
			};

			frame@b128000 {
				frame-number = <6>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b128000 0x1000>;
				status = "disabled";
			};
		};

		remoteproc_adsp: remoteproc@c700000 {
			compatible = "qcom,qcs404-adsp-pas";
			reg = <0x0c700000 0x4040>;

			interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready",
					  "handover", "stop-ack";

			clocks = <&xo_board>;
			clock-names = "xo";

			memory-region = <&adsp_fw_mem>;

			qcom,smem-states = <&adsp_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;

				qcom,remote-pid = <2>;
				mboxes = <&apcs_glb 8>;

				label = "adsp";
			};
		};

		pcie: pci@10000000 {
			compatible = "qcom,pcie-qcs404", "snps,dw-pcie";
			reg =  <0x10000000 0xf1d>,
			       <0x10000f20 0xa8>,
			       <0x07780000 0x2000>,
			       <0x10001000 0x2000>;
			reg-names = "dbi", "elbi", "parf", "config";
			device_type = "pci";
			linux,pci-domain = <0>;
			bus-range = <0x00 0xff>;
			num-lanes = <1>;
			#address-cells = <3>;
			#size-cells = <2>;

			ranges = <0x81000000 0 0          0x10003000 0 0x00010000>, /* I/O */
				 <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */

			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi";
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
					<0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
					<0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
					<0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
			clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
				 <&gcc GCC_PCIE_0_AUX_CLK>,
				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
			clock-names = "iface", "aux", "master_bus", "slave_bus";

			resets = <&gcc 18>,
				 <&gcc 17>,
				 <&gcc 15>,
				 <&gcc 19>,
				 <&gcc GCC_PCIE_0_BCR>,
				 <&gcc 16>;
			reset-names = "axi_m",
				      "axi_s",
				      "axi_m_sticky",
				      "pipe_sticky",
				      "pwr",
				      "ahb";

			phys = <&pcie_phy>;
			phy-names = "pciephy";

			status = "disabled";
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 2 0xff08>,
			     <GIC_PPI 3 0xff08>,
			     <GIC_PPI 4 0xff08>,
			     <GIC_PPI 1 0xff08>;
	};

	smp2p-adsp {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;
		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs_glb 10>;
		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		adsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		adsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-cdsp {
		compatible = "qcom,smp2p";
		qcom,smem = <94>, <432>;
		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs_glb 14>;
		qcom,local-pid = <0>;
		qcom,remote-pid = <5>;

		cdsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		cdsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-wcss {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;
		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs_glb 18>;
		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		wcss_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		wcss_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	thermal-zones {
		aoss-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 0>;

			trips {
				aoss_alert0: trip-point0 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		q6-hvx-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 1>;

			trips {
				q6_hvx_alert0: trip-point0 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		lpass-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 2>;

			trips {
				lpass_alert0: trip-point0 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		wlan-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 3>;

			trips {
				wlan_alert0: trip-point0 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		cluster-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 4>;

			trips {
				cluster_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cluster_alert1: trip-point1 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cluster_crit: cluster_crit {
					temperature = <120000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
			cooling-maps {
				map0 {
					trip = <&cluster_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu0-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 5>;

			trips {
				cpu0_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu0_alert1: trip-point1 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu0_crit: cpu_crit {
					temperature = <120000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
			cooling-maps {
				map0 {
					trip = <&cpu0_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu1-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 6>;

			trips {
				cpu1_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu1_alert1: trip-point1 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu1_crit: cpu_crit {
					temperature = <120000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
			cooling-maps {
				map0 {
					trip = <&cpu1_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu2-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 7>;

			trips {
				cpu2_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu2_alert1: trip-point1 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu2_crit: cpu_crit {
					temperature = <120000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
			cooling-maps {
				map0 {
					trip = <&cpu2_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu3-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 8>;

			trips {
				cpu3_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu3_alert1: trip-point1 {
					temperature = <105000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu3_crit: cpu_crit {
					temperature = <120000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
			cooling-maps {
				map0 {
					trip = <&cpu3_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		gpu-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 9>;

			trips {
				gpu_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};
	};
};