// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
 * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
 */

#include <dt-bindings/clock/qcom,gcc-sdm660.h>
#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/qcom,apr.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <19200000>;
			clock-output-names = "xo_board";
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <32764>;
			clock-output-names = "sleep_clk";
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		CPU0: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x100>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
			L2_1: l2-cache {
				compatible = "cache";
				cache-level = <2>;
			};
		};

		CPU1: cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x101>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
		};

		CPU2: cpu@102 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x102>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
		};

		CPU3: cpu@103 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x103>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
		};

		CPU4: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x0>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
			L2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
			};
		};

		CPU5: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x1>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
		};

		CPU6: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x2>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
		};

		CPU7: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x3>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU4>;
				};

				core1 {
					cpu = <&CPU5>;
				};

				core2 {
					cpu = <&CPU6>;
				};

				core3 {
					cpu = <&CPU7>;
				};
			};

			cluster1 {
				core0 {
					cpu = <&CPU0>;
				};

				core1 {
					cpu = <&CPU1>;
				};

				core2 {
					cpu = <&CPU2>;
				};

				core3 {
					cpu = <&CPU3>;
				};
			};
		};

		idle-states {
			entry-method = "psci";

			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-retention";
				arm,psci-suspend-param = <0x40000002>;
				entry-latency-us = <338>;
				exit-latency-us = <423>;
				min-residency-us = <200>;
			};

			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <515>;
				exit-latency-us = <1821>;
				min-residency-us = <1000>;
				local-timer-stop;
			};

			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-retention";
				arm,psci-suspend-param = <0x40000002>;
				entry-latency-us = <154>;
				exit-latency-us = <87>;
				min-residency-us = <200>;
			};

			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <262>;
				exit-latency-us = <301>;
				min-residency-us = <1000>;
				local-timer-stop;
			};

			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-cluster-dynamic-retention";
				arm,psci-suspend-param = <0x400000F2>;
				entry-latency-us = <284>;
				exit-latency-us = <384>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-cluster-retention";
				arm,psci-suspend-param = <0x400000F3>;
				entry-latency-us = <338>;
				exit-latency-us = <423>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-cluster-retention";
				arm,psci-suspend-param = <0x400000F4>;
				entry-latency-us = <515>;
				exit-latency-us = <1821>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-cluster-dynamic-retention";
				arm,psci-suspend-param = <0x400000F2>;
				entry-latency-us = <272>;
				exit-latency-us = <329>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-cluster-retention";
				arm,psci-suspend-param = <0x400000F3>;
				entry-latency-us = <332>;
				exit-latency-us = <368>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-cluster-retention";
				arm,psci-suspend-param = <0x400000F4>;
				entry-latency-us = <545>;
				exit-latency-us = <1609>;
				min-residency-us = <9987>;
				local-timer-stop;
			};
		};
	};

	firmware {
		scm {
			compatible = "qcom,scm-msm8998", "qcom,scm";
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the reg */
		reg = <0x0 0x80000000 0x0 0x0>;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		wlan_msa_guard: wlan-msa-guard@85600000 {
			reg = <0x0 0x85600000 0x0 0x100000>;
			no-map;
		};

		wlan_msa_mem: wlan-msa-mem@85700000 {
			reg = <0x0 0x85700000 0x0 0x100000>;
			no-map;
		};

		qhee_code: qhee-code@85800000 {
			reg = <0x0 0x85800000 0x0 0x600000>;
			no-map;
		};

		rmtfs_mem: memory@85e00000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0x0 0x85e00000 0x0 0x200000>;
			no-map;

			qcom,client-id = <1>;
			qcom,vmid = <15>;
		};

		smem_region: smem-mem@86000000 {
			reg = <0 0x86000000 0 0x200000>;
			no-map;
		};

		tz_mem: memory@86200000 {
			reg = <0x0 0x86200000 0x0 0x3300000>;
			no-map;
		};

		mpss_region: mpss@8ac00000 {
			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
			no-map;
		};

		adsp_region: adsp@92a00000 {
			reg = <0x0 0x92a00000 0x0 0x1e00000>;
			no-map;
		};

		mba_region: mba@94800000 {
			reg = <0x0 0x94800000 0x0 0x200000>;
			no-map;
		};

		buffer_mem: tzbuffer@94a00000 {
			reg = <0x0 0x94a00000 0x0 0x100000>;
			no-map;
		};

		venus_region: venus@9f800000 {
			reg = <0x0 0x9f800000 0x0 0x800000>;
			no-map;
		};

		adsp_mem: adsp-region@f6000000 {
			reg = <0x0 0xf6000000 0x0 0x800000>;
			no-map;
		};

		qseecom_mem: qseecom-region@f6800000 {
			reg = <0x0 0xf6800000 0x0 0x1400000>;
			no-map;
		};

		zap_shader_region: gpu@fed00000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0xfed00000 0x0 0xa00000>;
			no-map;
		};
	};

	rpm-glink {
		compatible = "qcom,glink-rpm";

		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
		qcom,rpm-msg-ram = <&rpm_msg_ram>;
		mboxes = <&apcs_glb 0>;

		rpm_requests: rpm-requests {
			compatible = "qcom,rpm-sdm660";
			qcom,glink-channels = "rpm_requests";

			rpmcc: clock-controller {
				compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
				#clock-cells = <1>;
			};

			rpmpd: power-controller {
				compatible = "qcom,sdm660-rpmpd";
				#power-domain-cells = <1>;
				operating-points-v2 = <&rpmpd_opp_table>;

				rpmpd_opp_table: opp-table {
					compatible = "operating-points-v2";

					rpmpd_opp_ret: opp1 {
						opp-level = <RPM_SMD_LEVEL_RETENTION>;
					};

					rpmpd_opp_ret_plus: opp2 {
						opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
					};

					rpmpd_opp_min_svs: opp3 {
						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
					};

					rpmpd_opp_low_svs: opp4 {
						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
					};

					rpmpd_opp_svs: opp5 {
						opp-level = <RPM_SMD_LEVEL_SVS>;
					};

					rpmpd_opp_svs_plus: opp6 {
						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
					};

					rpmpd_opp_nom: opp7 {
						opp-level = <RPM_SMD_LEVEL_NOM>;
					};

					rpmpd_opp_nom_plus: opp8 {
						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
					};

					rpmpd_opp_turbo: opp9 {
						opp-level = <RPM_SMD_LEVEL_TURBO>;
					};
				};
			};
		};
	};

	smem: smem {
		compatible = "qcom,smem";
		memory-region = <&smem_region>;
		hwlocks = <&tcsr_mutex 3>;
	};

	smp2p-adsp {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;
		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs_glb 10>;
		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		adsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		adsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-mpss {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;
		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs_glb 14>;
		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		modem_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		modem_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;
		compatible = "simple-bus";

		gcc: clock-controller@100000 {
			compatible = "qcom,gcc-sdm630";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
			reg = <0x00100000 0x94000>;

			clock-names = "xo", "sleep_clk";
			clocks = <&xo_board>,
					<&sleep_clk>;
		};

		rpm_msg_ram: sram@778000 {
			compatible = "qcom,rpm-msg-ram";
			reg = <0x00778000 0x7000>;
		};

		qfprom: qfprom@780000 {
			compatible = "qcom,qfprom";
			reg = <0x00780000 0x621c>;
			#address-cells = <1>;
			#size-cells = <1>;

			qusb2_hstx_trim: hstx-trim@240 {
				reg = <0x240 0x1>;
				bits = <25 3>;
			};

			gpu_speed_bin: gpu-speed-bin@41a0 {
				reg = <0x41a0 0x1>;
				bits = <21 7>;
			};
		};

		rng: rng@793000 {
			compatible = "qcom,prng-ee";
			reg = <0x00793000 0x1000>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
		};

		bimc: interconnect@1008000 {
			compatible = "qcom,sdm660-bimc";
			reg = <0x01008000 0x78000>;
			#interconnect-cells = <1>;
			clock-names = "bus", "bus_a";
			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
		};

		restart@10ac000 {
			compatible = "qcom,pshold";
			reg = <0x010ac000 0x4>;
		};

		cnoc: interconnect@1500000 {
			compatible = "qcom,sdm660-cnoc";
			reg = <0x01500000 0x10000>;
			#interconnect-cells = <1>;
			clock-names = "bus", "bus_a";
			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
		};

		snoc: interconnect@1626000 {
			compatible = "qcom,sdm660-snoc";
			reg = <0x01626000 0x7090>;
			#interconnect-cells = <1>;
			clock-names = "bus", "bus_a";
			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
		};

		anoc2_smmu: iommu@16c0000 {
			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
			reg = <0x016c0000 0x40000>;

			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
			assigned-clock-rates = <1000>;
			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
			clock-names = "bus";
			#global-interrupts = <2>;
			#iommu-cells = <1>;

			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		a2noc: interconnect@1704000 {
			compatible = "qcom,sdm660-a2noc";
			reg = <0x01704000 0xc100>;
			#interconnect-cells = <1>;
			clock-names = "bus",
				      "bus_a",
				      "ipa",
				      "ufs_axi",
				      "aggre2_ufs_axi",
				      "aggre2_usb3_axi",
				      "cfg_noc_usb2_axi";
			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
				 <&rpmcc RPM_SMD_IPA_CLK>,
				 <&gcc GCC_UFS_AXI_CLK>,
				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
				 <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
		};

		mnoc: interconnect@1745000 {
			compatible = "qcom,sdm660-mnoc";
			reg = <0x01745000 0xA010>;
			#interconnect-cells = <1>;
			clock-names = "bus", "bus_a", "iface";
			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
				 <&mmcc AHB_CLK_SRC>;
		};

		tsens: thermal-sensor@10ae000 {
			compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
			reg = <0x010ae000 0x1000>, /* TM */
				  <0x010ad000 0x1000>; /* SROT */
			#qcom,sensors = <12>;
			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
					 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow", "critical";
			#thermal-sensor-cells = <1>;
		};

		tcsr_mutex_regs: syscon@1f40000 {
			compatible = "syscon";
			reg = <0x01f40000 0x40000>;
		};

		tlmm: pinctrl@3100000 {
			compatible = "qcom,sdm630-pinctrl";
			reg = <0x03100000 0x400000>,
				  <0x03500000 0x400000>,
				  <0x03900000 0x400000>;
			reg-names = "south", "center", "north";
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			gpio-ranges = <&tlmm 0 0 114>;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;

			blsp1_uart1_default: blsp1-uart1-default {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_uart1_sleep: blsp1-uart1-sleep {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_uart2_default: blsp1-uart2-default {
				pins = "gpio4", "gpio5";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_uart1_default: blsp2-uart1-active {
				tx-rts {
					pins = "gpio16", "gpio19";
					function = "blsp_uart5";
					drive-strength = <2>;
					bias-disable;
				};

				rx {
					/*
					 * Avoid garbage data while BT module
					 * is powered off or not driving signal
					 */
					pins = "gpio17";
					function = "blsp_uart5";
					drive-strength = <2>;
					bias-pull-up;
				};

				cts {
					/* Match the pull of the BT module */
					pins = "gpio18";
					function = "blsp_uart5";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			blsp2_uart1_sleep: blsp2-uart1-sleep {
				tx {
					pins = "gpio16";
					function = "gpio";
					drive-strength = <2>;
					bias-pull-up;
				};

				rx-cts-rts {
					pins = "gpio17", "gpio18", "gpio19";
					function = "gpio";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			i2c1_default: i2c1-default {
				pins = "gpio2", "gpio3";
				function = "blsp_i2c1";
				drive-strength = <2>;
				bias-disable;
			};

			i2c1_sleep: i2c1-sleep {
				pins = "gpio2", "gpio3";
				function = "blsp_i2c1";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c2_default: i2c2-default {
				pins = "gpio6", "gpio7";
				function = "blsp_i2c2";
				drive-strength = <2>;
				bias-disable;
			};

			i2c2_sleep: i2c2-sleep {
				pins = "gpio6", "gpio7";
				function = "blsp_i2c2";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c3_default: i2c3-default {
				pins = "gpio10", "gpio11";
				function = "blsp_i2c3";
				drive-strength = <2>;
				bias-disable;
			};

			i2c3_sleep: i2c3-sleep {
				pins = "gpio10", "gpio11";
				function = "blsp_i2c3";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c4_default: i2c4-default {
				pins = "gpio14", "gpio15";
				function = "blsp_i2c4";
				drive-strength = <2>;
				bias-disable;
			};

			i2c4_sleep: i2c4-sleep {
				pins = "gpio14", "gpio15";
				function = "blsp_i2c4";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c5_default: i2c5-default {
				pins = "gpio18", "gpio19";
				function = "blsp_i2c5";
				drive-strength = <2>;
				bias-disable;
			};

			i2c5_sleep: i2c5-sleep {
				pins = "gpio18", "gpio19";
				function = "blsp_i2c5";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c6_default: i2c6-default {
				pins = "gpio22", "gpio23";
				function = "blsp_i2c6";
				drive-strength = <2>;
				bias-disable;
			};

			i2c6_sleep: i2c6-sleep {
				pins = "gpio22", "gpio23";
				function = "blsp_i2c6";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c7_default: i2c7-default {
				pins = "gpio26", "gpio27";
				function = "blsp_i2c7";
				drive-strength = <2>;
				bias-disable;
			};

			i2c7_sleep: i2c7-sleep {
				pins = "gpio26", "gpio27";
				function = "blsp_i2c7";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c8_default: i2c8-default {
				pins = "gpio30", "gpio31";
				function = "blsp_i2c8";
				drive-strength = <2>;
				bias-disable;
			};

			i2c8_sleep: i2c8-sleep {
				pins = "gpio30", "gpio31";
				function = "blsp_i2c8";
				drive-strength = <2>;
				bias-pull-up;
			};

			cci0_default: cci0_default {
				pinmux {
					pins = "gpio36","gpio37";
					function = "cci_i2c";
				};

				pinconf {
					pins = "gpio36","gpio37";
					bias-pull-up;
					drive-strength = <2>;
				};
			};

			cci1_default: cci1_default {
				pinmux {
					pins = "gpio38","gpio39";
					function = "cci_i2c";
				};

				pinconf {
					pins = "gpio38","gpio39";
					bias-pull-up;
					drive-strength = <2>;
				};
			};

			sdc1_state_on: sdc1-on {
				clk {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <16>;
				};

				cmd {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				data {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <10>;
				};

				rclk {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc1_state_off: sdc1-off {
				clk {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <2>;
				};

				cmd {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				data {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <2>;
				};

				rclk {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc2_state_on: sdc2-on {
				clk {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <16>;
				};

				cmd {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				data {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <10>;
				};

				sd-cd {
					pins = "gpio54";
					bias-pull-up;
					drive-strength = <2>;
				};
			};

			sdc2_state_off: sdc2-off {
				clk {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <2>;
				};

				cmd {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				data {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <2>;
				};

				sd-cd {
					pins = "gpio54";
					bias-disable;
					drive-strength = <2>;
				};
			};
		};

		adreno_gpu: gpu@5000000 {
			compatible = "qcom,adreno-508.0", "qcom,adreno";
			#stream-id-cells = <16>;

			reg = <0x05000000 0x40000>;
			reg-names = "kgsl_3d0_reg_memory";

			interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
				<&gpucc GPUCC_RBBMTIMER_CLK>,
				<&gcc GCC_BIMC_GFX_CLK>,
				<&gcc GCC_GPU_BIMC_GFX_CLK>,
				<&gpucc GPUCC_RBCPR_CLK>,
				<&gpucc GPUCC_GFX3D_CLK>;

			clock-names = "iface",
				"rbbmtimer",
				"mem",
				"mem_iface",
				"rbcpr",
				"core";

			power-domains = <&rpmpd SDM660_VDDMX>;
			iommus = <&kgsl_smmu 0>;

			nvmem-cells = <&gpu_speed_bin>;
			nvmem-cell-names = "speed_bin";

			interconnects = <&gnoc 1 &bimc 5>;
			interconnect-names = "gfx-mem";

			operating-points-v2 = <&gpu_sdm630_opp_table>;

			gpu_sdm630_opp_table: opp-table {
				compatible  = "operating-points-v2";
				opp-775000000 {
					opp-hz = /bits/ 64 <775000000>;
					opp-level = <RPM_SMD_LEVEL_TURBO>;
					opp-peak-kBps = <5412000>;
					opp-supported-hw = <0xA2>;
				};
				opp-647000000 {
					opp-hz = /bits/ 64 <647000000>;
					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
					opp-peak-kBps = <4068000>;
					opp-supported-hw = <0xFF>;
				};
				opp-588000000 {
					opp-hz = /bits/ 64 <588000000>;
					opp-level = <RPM_SMD_LEVEL_NOM>;
					opp-peak-kBps = <3072000>;
					opp-supported-hw = <0xFF>;
				};
				opp-465000000 {
					opp-hz = /bits/ 64 <465000000>;
					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
					opp-peak-kBps = <2724000>;
					opp-supported-hw = <0xFF>;
				};
				opp-370000000 {
					opp-hz = /bits/ 64 <370000000>;
					opp-level = <RPM_SMD_LEVEL_SVS>;
					opp-peak-kBps = <2188000>;
					opp-supported-hw = <0xFF>;
				};
				opp-240000000 {
					opp-hz = /bits/ 64 <240000000>;
					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
					opp-peak-kBps = <1648000>;
					opp-supported-hw = <0xFF>;
				};
				opp-160000000 {
					opp-hz = /bits/ 64 <160000000>;
					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
					opp-peak-kBps = <1200000>;
					opp-supported-hw = <0xFF>;
				};
			};
		};

		kgsl_smmu: iommu@5040000 {
			compatible = "qcom,sdm630-smmu-v2",
				     "qcom,adreno-smmu", "qcom,smmu-v2";
			reg = <0x05040000 0x10000>;

			/*
			 * GX GDSC parent is CX. We need to bring up CX for SMMU
			 * but we need both up for Adreno. On the other hand, we
			 * need to manage the GX rpmpd domain in the adreno driver.
			 * Enable CX/GX GDSCs here so that we can manage just the GX
			 * RPM Power Domain in the Adreno driver.
			 */
			power-domains = <&gpucc GPU_GX_GDSC>;
			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
				 <&gcc GCC_BIMC_GFX_CLK>,
				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
			clock-names = "iface", "mem", "mem_iface";
			#global-interrupts = <2>;
			#iommu-cells = <1>;

			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		gpucc: clock-controller@5065000 {
			compatible = "qcom,gpucc-sdm630";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
			reg = <0x05065000 0x9038>;

			clocks = <&xo_board>,
				 <&gcc GCC_GPU_GPLL0_CLK>,
				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
			clock-names = "xo",
				      "gcc_gpu_gpll0_clk",
				      "gcc_gpu_gpll0_div_clk";
			status = "disabled";
		};

		lpass_smmu: iommu@5100000 {
			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
			reg = <0x05100000 0x40000>;
			#iommu-cells = <1>;

			#global-interrupts = <2>;
			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		sram@290000 {
			compatible = "qcom,rpm-stats";
			reg = <0x00290000 0x10000>;
		};

		spmi_bus: spmi@800f000 {
			compatible = "qcom,spmi-pmic-arb";
			reg =	<0x0800f000 0x1000>,
				<0x08400000 0x1000000>,
				<0x09400000 0x1000000>,
				<0x0a400000 0x220000>,
				<0x0800a000 0x3000>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupt-names = "periph_irq";
			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
			cell-index = <0>;
		};

		usb3: usb@a8f8800 {
			compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
			reg = <0x0a8f8800 0x400>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
				 <&gcc GCC_USB30_MASTER_CLK>,
				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
				 <&gcc GCC_USB30_SLEEP_CLK>;
			clock-names = "cfg_noc", "core", "iface", "bus",
				      "mock_utmi", "sleep";

			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_MASTER_CLK>,
					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
			assigned-clock-rates = <19200000>, <120000000>,
					       <19200000>;

			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hs_phy_irq", "ss_phy_irq";

			power-domains = <&gcc USB_30_GDSC>;
			qcom,select-utmi-as-pipe-clk;

			resets = <&gcc GCC_USB_30_BCR>;

			usb3_dwc3: usb@a800000 {
				compatible = "snps,dwc3";
				reg = <0x0a800000 0xc8d0>;
				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
				snps,dis_u2_susphy_quirk;
				snps,dis_enblslpm_quirk;

				/*
				 * SDM630 technically supports USB3 but I
				 * haven't seen any devices making use of it.
				 */
				maximum-speed = "high-speed";
				phys = <&qusb2phy>;
				phy-names = "usb2-phy";
				snps,hird-threshold = /bits/ 8 <0>;
			};
		};

		qusb2phy: phy@c012000 {
			compatible = "qcom,sdm660-qusb2-phy";
			reg = <0x0c012000 0x180>;
			#phy-cells = <0>;

			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
			clock-names = "cfg_ahb", "ref";

			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
			nvmem-cells = <&qusb2_hstx_trim>;
			status = "disabled";
		};

		sdhc_2: sdhci@c084000 {
			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x0c084000 0x1000>;
			reg-names = "hc";

			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			bus-width = <4>;
			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
					<&gcc GCC_SDCC2_AHB_CLK>,
					<&xo_board>;
			clock-names = "core", "iface", "xo";

			interconnects = <&a2noc 3 &a2noc 10>,
					<&gnoc 0 &cnoc 28>;
			operating-points-v2 = <&sdhc2_opp_table>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdc2_state_on>;
			pinctrl-1 = <&sdc2_state_off>;
			power-domains = <&rpmpd SDM660_VDDCX>;

			status = "disabled";

			sdhc2_opp_table: opp-table {
				 compatible = "operating-points-v2";

				 opp-50000000 {
					opp-hz = /bits/ 64 <50000000>;
					required-opps = <&rpmpd_opp_low_svs>;
					opp-peak-kBps = <200000 140000>;
					opp-avg-kBps = <130718 133320>;
				 };
				 opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmpd_opp_svs>;
					opp-peak-kBps = <250000 160000>;
					opp-avg-kBps = <196078 150000>;
				 };
				 opp-200000000 {
					opp-hz = /bits/ 64 <200000000>;
					required-opps = <&rpmpd_opp_nom>;
					opp-peak-kBps = <4096000 4096000>;
					opp-avg-kBps = <1338562 1338562>;
				 };
			};
		};

		sdhc_1: sdhci@c0c4000 {
			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x0c0c4000 0x1000>,
			      <0x0c0c5000 0x1000>,
			      <0x0c0c8000 0x8000>;
			reg-names = "hc", "cqhci", "ice";

			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
				 <&gcc GCC_SDCC1_AHB_CLK>,
				 <&xo_board>,
				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
			clock-names = "core", "iface", "xo", "ice";

			interconnects = <&a2noc 2 &a2noc 10>,
					<&gnoc 0 &cnoc 27>;
			interconnect-names = "sdhc1-ddr", "cpu-sdhc1";
			operating-points-v2 = <&sdhc1_opp_table>;
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdc1_state_on>;
			pinctrl-1 = <&sdc1_state_off>;
			power-domains = <&rpmpd SDM660_VDDCX>;

			bus-width = <8>;
			non-removable;

			status = "disabled";

			sdhc1_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-50000000 {
					opp-hz = /bits/ 64 <50000000>;
					required-opps = <&rpmpd_opp_low_svs>;
					opp-peak-kBps = <200000 140000>;
					opp-avg-kBps = <130718 133320>;
				};
				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmpd_opp_svs>;
					opp-peak-kBps = <250000 160000>;
					opp-avg-kBps = <196078 150000>;
				};
				opp-384000000 {
					opp-hz = /bits/ 64 <384000000>;
					required-opps = <&rpmpd_opp_nom>;
					opp-peak-kBps = <4096000 4096000>;
					opp-avg-kBps = <1338562 1338562>;
				};
			};
		};

		mmcc: clock-controller@c8c0000 {
			compatible = "qcom,mmcc-sdm630";
			reg = <0x0c8c0000 0x40000>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
			clock-names = "xo",
					"sleep_clk",
					"gpll0",
					"gpll0_div",
					"dsi0pll",
					"dsi0pllbyte",
					"dsi1pll",
					"dsi1pllbyte",
					"dp_link_2x_clk_divsel_five",
					"dp_vco_divided_clk_src_mux";
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
					<&sleep_clk>,
					<&gcc GCC_MMSS_GPLL0_CLK>,
					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
					<&dsi0_phy 1>,
					<&dsi0_phy 0>,
					<0>,
					<0>,
					<0>,
					<0>;
		};

		dsi_opp_table: dsi-opp-table {
			compatible = "operating-points-v2";

			opp-131250000 {
				opp-hz = /bits/ 64 <131250000>;
				required-opps = <&rpmpd_opp_svs>;
			};

			opp-210000000 {
				opp-hz = /bits/ 64 <210000000>;
				required-opps = <&rpmpd_opp_svs_plus>;
			};

			opp-262500000 {
				opp-hz = /bits/ 64 <262500000>;
				required-opps = <&rpmpd_opp_nom>;
			};
		};

		mdss: mdss@c900000 {
			compatible = "qcom,mdss";
			reg = <0x0c900000 0x1000>,
			      <0x0c9b0000 0x1040>;
			reg-names = "mdss_phys", "vbif_phys";

			power-domains = <&mmcc MDSS_GDSC>;

			clocks = <&mmcc MDSS_AHB_CLK>,
				 <&mmcc MDSS_AXI_CLK>,
				 <&mmcc MDSS_VSYNC_CLK>,
				 <&mmcc MDSS_MDP_CLK>;
			clock-names = "iface",
				      "bus",
				      "vsync",
				      "core";

			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;

			interrupt-controller;
			#interrupt-cells = <1>;

			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			status = "disabled";

			mdp: mdp@c901000 {
				compatible = "qcom,mdp5";
				reg = <0x0c901000 0x89000>;
				reg-names = "mdp_phys";

				interrupt-parent = <&mdss>;
				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;

				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
						  <&mmcc MDSS_VSYNC_CLK>;
				assigned-clock-rates = <300000000>,
						       <19200000>;
				clocks = <&mmcc MDSS_AHB_CLK>,
					 <&mmcc MDSS_AXI_CLK>,
					 <&mmcc MDSS_MDP_CLK>,
					 <&mmcc MDSS_VSYNC_CLK>;
				clock-names = "iface",
					      "bus",
					      "core",
					      "vsync";

				interconnects = <&mnoc 2 &bimc 5>,
						<&mnoc 3 &bimc 5>,
						<&gnoc 0 &mnoc 17>;
				interconnect-names = "mdp0-mem",
						     "mdp1-mem",
						     "rotator-mem";
				iommus = <&mmss_smmu 0>;
				operating-points-v2 = <&mdp_opp_table>;
				power-domains = <&rpmpd SDM660_VDDCX>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						mdp5_intf1_out: endpoint {
							remote-endpoint = <&dsi0_in>;
						};
					};
				};

				mdp_opp_table: mdp-opp {
					compatible = "operating-points-v2";

					opp-150000000 {
						opp-hz = /bits/ 64 <150000000>;
						opp-peak-kBps = <320000 320000 76800>;
						required-opps = <&rpmpd_opp_low_svs>;
					};
					opp-275000000 {
						opp-hz = /bits/ 64 <275000000>;
						opp-peak-kBps = <6400000 6400000 160000>;
						required-opps = <&rpmpd_opp_svs>;
					};
					opp-300000000 {
						opp-hz = /bits/ 64 <300000000>;
						opp-peak-kBps = <6400000 6400000 190000>;
						required-opps = <&rpmpd_opp_svs_plus>;
					};
					opp-330000000 {
						opp-hz = /bits/ 64 <330000000>;
						opp-peak-kBps = <6400000 6400000 240000>;
						required-opps = <&rpmpd_opp_nom>;
					};
					opp-412500000 {
						opp-hz = /bits/ 64 <412500000>;
						opp-peak-kBps = <6400000 6400000 320000>;
						required-opps = <&rpmpd_opp_turbo>;
					};
				};
			};

			dsi0: dsi@c994000 {
				compatible = "qcom,mdss-dsi-ctrl";
				reg = <0x0c994000 0x400>;
				reg-names = "dsi_ctrl";

				operating-points-v2 = <&dsi_opp_table>;
				power-domains = <&rpmpd SDM660_VDDCX>;

				interrupt-parent = <&mdss>;
				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;

				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
						  <&mmcc PCLK0_CLK_SRC>;
				assigned-clock-parents = <&dsi0_phy 0>,
							 <&dsi0_phy 1>;

				clocks = <&mmcc MDSS_MDP_CLK>,
					 <&mmcc MDSS_BYTE0_CLK>,
					 <&mmcc MDSS_BYTE0_INTF_CLK>,
					 <&mmcc MNOC_AHB_CLK>,
					 <&mmcc MDSS_AHB_CLK>,
					 <&mmcc MDSS_AXI_CLK>,
					 <&mmcc MISC_AHB_CLK>,
					 <&mmcc MDSS_PCLK0_CLK>,
					 <&mmcc MDSS_ESC0_CLK>;
				clock-names = "mdp_core",
					      "byte",
					      "byte_intf",
					      "mnoc",
					      "iface",
					      "bus",
					      "core_mmss",
					      "pixel",
					      "core";

				phys = <&dsi0_phy>;
				phy-names = "dsi";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						dsi0_in: endpoint {
							remote-endpoint = <&mdp5_intf1_out>;
						};
					};

					port@1 {
						reg = <1>;
						dsi0_out: endpoint {
						};
					};
				};
			};

			dsi0_phy: dsi-phy@c994400 {
				compatible = "qcom,dsi-phy-14nm-660";
				reg = <0x0c994400 0x100>,
				      <0x0c994500 0x300>,
				      <0x0c994800 0x188>;
				reg-names = "dsi_phy",
					    "dsi_phy_lane",
					    "dsi_pll";

				#clock-cells = <1>;
				#phy-cells = <0>;

				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
				clock-names = "iface", "ref";
			};
		};

		blsp1_dma: dma-controller@c144000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x0c144000 0x1f000>;
			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
			qcom,controlled-remotely;
			num-channels = <18>;
			qcom,num-ees = <4>;
		};

		blsp1_uart1: serial@c16f000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x0c16f000 0x200>;
			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp1_uart1_default>;
			pinctrl-1 = <&blsp1_uart1_sleep>;
			status = "disabled";
		};

		blsp1_uart2: serial@c170000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x0c170000 0x1000>;
			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
			dma-names = "tx", "rx";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_uart2_default>;
			status = "disabled";
		};

		blsp_i2c1: i2c@c175000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c175000 0x600>;
			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
					<&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c1_default>;
			pinctrl-1 = <&i2c1_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c2: i2c@c176000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c176000 0x600>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c2_default>;
			pinctrl-1 = <&i2c2_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c3: i2c@c177000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c177000 0x600>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c3_default>;
			pinctrl-1 = <&i2c3_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c4: i2c@c178000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c178000 0x600>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c4_default>;
			pinctrl-1 = <&i2c4_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp2_dma: dma-controller@c184000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x0c184000 0x1f000>;
			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
			qcom,controlled-remotely;
			num-channels = <18>;
			qcom,num-ees = <4>;
		};

		blsp2_uart1: serial@c1af000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x0c1af000 0x200>;
			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp2_uart1_default>;
			pinctrl-1 = <&blsp2_uart1_sleep>;
			status = "disabled";
		};

		blsp_i2c5: i2c@c1b5000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b5000 0x600>;
			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c5_default>;
			pinctrl-1 = <&i2c5_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c6: i2c@c1b6000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b6000 0x600>;
			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c6_default>;
			pinctrl-1 = <&i2c6_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c7: i2c@c1b7000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b7000 0x600>;
			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c7_default>;
			pinctrl-1 = <&i2c7_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c8: i2c@c1b8000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b8000 0x600>;
			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
			dma-names = "tx", "rx";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c8_default>;
			pinctrl-1 = <&i2c8_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		imem@146bf000 {
			compatible = "simple-mfd";
			reg = <0x146bf000 0x1000>;

			#address-cells = <1>;
			#size-cells = <1>;

			ranges = <0 0x146bf000 0x1000>;

			pil-reloc@94c {
				compatible = "qcom,pil-reloc-info";
				reg = <0x94c 0xc8>;
			};
		};

		camss: camss@ca00000 {
			compatible = "qcom,sdm660-camss";
			reg = <0x0c824000 0x1000>,
			      <0x0ca00120 0x4>,
			      <0x0c825000 0x1000>,
			      <0x0ca00124 0x4>,
			      <0x0c826000 0x1000>,
			      <0x0ca00128 0x4>,
			      <0x0ca30000 0x100>,
			      <0x0ca30400 0x100>,
			      <0x0ca30800 0x100>,
			      <0x0ca30c00 0x100>,
			      <0x0ca31000 0x500>,
			      <0x0ca00020 0x10>,
			      <0x0ca10000 0x1000>,
			      <0x0ca14000 0x1000>;
			reg-names = "csiphy0",
				    "csiphy0_clk_mux",
				    "csiphy1",
				    "csiphy1_clk_mux",
				    "csiphy2",
				    "csiphy2_clk_mux",
				    "csid0",
				    "csid1",
				    "csid2",
				    "csid3",
				    "ispif",
				    "csi_clk_mux",
				    "vfe0",
				    "vfe1";
			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "csiphy0",
					  "csiphy1",
					  "csiphy2",
					  "csid0",
					  "csid1",
					  "csid2",
					  "csid3",
					  "ispif",
					  "vfe0",
					  "vfe1";
			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
				<&mmcc THROTTLE_CAMSS_AXI_CLK>,
				<&mmcc CAMSS_ISPIF_AHB_CLK>,
				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
				<&mmcc CAMSS_CSI0_AHB_CLK>,
				<&mmcc CAMSS_CSI0_CLK>,
				<&mmcc CAMSS_CPHY_CSID0_CLK>,
				<&mmcc CAMSS_CSI0PIX_CLK>,
				<&mmcc CAMSS_CSI0RDI_CLK>,
				<&mmcc CAMSS_CSI1_AHB_CLK>,
				<&mmcc CAMSS_CSI1_CLK>,
				<&mmcc CAMSS_CPHY_CSID1_CLK>,
				<&mmcc CAMSS_CSI1PIX_CLK>,
				<&mmcc CAMSS_CSI1RDI_CLK>,
				<&mmcc CAMSS_CSI2_AHB_CLK>,
				<&mmcc CAMSS_CSI2_CLK>,
				<&mmcc CAMSS_CPHY_CSID2_CLK>,
				<&mmcc CAMSS_CSI2PIX_CLK>,
				<&mmcc CAMSS_CSI2RDI_CLK>,
				<&mmcc CAMSS_CSI3_AHB_CLK>,
				<&mmcc CAMSS_CSI3_CLK>,
				<&mmcc CAMSS_CPHY_CSID3_CLK>,
				<&mmcc CAMSS_CSI3PIX_CLK>,
				<&mmcc CAMSS_CSI3RDI_CLK>,
				<&mmcc CAMSS_AHB_CLK>,
				<&mmcc CAMSS_VFE0_CLK>,
				<&mmcc CAMSS_CSI_VFE0_CLK>,
				<&mmcc CAMSS_VFE0_AHB_CLK>,
				<&mmcc CAMSS_VFE0_STREAM_CLK>,
				<&mmcc CAMSS_VFE1_CLK>,
				<&mmcc CAMSS_CSI_VFE1_CLK>,
				<&mmcc CAMSS_VFE1_AHB_CLK>,
				<&mmcc CAMSS_VFE1_STREAM_CLK>,
				<&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
				<&mmcc CAMSS_VFE_VBIF_AXI_CLK>,
				<&mmcc CSIPHY_AHB2CRIF_CLK>,
				<&mmcc CAMSS_CPHY_CSID0_CLK>,
				<&mmcc CAMSS_CPHY_CSID1_CLK>,
				<&mmcc CAMSS_CPHY_CSID2_CLK>,
				<&mmcc CAMSS_CPHY_CSID3_CLK>;
			clock-names = "top_ahb",
				"throttle_axi",
				"ispif_ahb",
				"csiphy0_timer",
				"csiphy1_timer",
				"csiphy2_timer",
				"csi0_ahb",
				"csi0",
				"csi0_phy",
				"csi0_pix",
				"csi0_rdi",
				"csi1_ahb",
				"csi1",
				"csi1_phy",
				"csi1_pix",
				"csi1_rdi",
				"csi2_ahb",
				"csi2",
				"csi2_phy",
				"csi2_pix",
				"csi2_rdi",
				"csi3_ahb",
				"csi3",
				"csi3_phy",
				"csi3_pix",
				"csi3_rdi",
				"ahb",
				"vfe0",
				"csi_vfe0",
				"vfe0_ahb",
				"vfe0_stream",
				"vfe1",
				"csi_vfe1",
				"vfe1_ahb",
				"vfe1_stream",
				"vfe_ahb",
				"vfe_axi",
				"csiphy_ahb2crif",
				"cphy_csid0",
				"cphy_csid1",
				"cphy_csid2",
				"cphy_csid3";
			interconnects = <&mnoc 5 &bimc 5>;
			interconnect-names = "vfe-mem";
			iommus = <&mmss_smmu 0xc00>,
				 <&mmss_smmu 0xc01>,
				 <&mmss_smmu 0xc02>,
				 <&mmss_smmu 0xc03>;
			power-domains = <&mmcc CAMSS_VFE0_GDSC>,
					<&mmcc CAMSS_VFE1_GDSC>;
			status = "disabled";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		cci: cci@ca0c000 {
			compatible = "qcom,msm8996-cci";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0ca0c000 0x1000>;
			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;

			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
					  <&mmcc CAMSS_CCI_CLK>;
			assigned-clock-rates = <80800000>, <37500000>;
			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
				 <&mmcc CAMSS_CCI_AHB_CLK>,
				 <&mmcc CAMSS_CCI_CLK>,
				 <&mmcc CAMSS_AHB_CLK>;
			clock-names = "camss_top_ahb",
				      "cci_ahb",
				      "cci",
				      "camss_ahb";

			pinctrl-names = "default";
			pinctrl-0 = <&cci0_default &cci1_default>;
			power-domains = <&mmcc CAMSS_TOP_GDSC>;
			status = "disabled";

			cci_i2c0: i2c-bus@0 {
				reg = <0>;
				clock-frequency = <400000>;
				#address-cells = <1>;
				#size-cells = <0>;
			};

			cci_i2c1: i2c-bus@1 {
				reg = <1>;
				clock-frequency = <400000>;
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		venus: video-codec@cc00000 {
			compatible = "qcom,sdm660-venus";
			reg = <0x0cc00000 0xff000>;
			clocks = <&mmcc VIDEO_CORE_CLK>,
				 <&mmcc VIDEO_AHB_CLK>,
				 <&mmcc VIDEO_AXI_CLK>,
				 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
			clock-names = "core", "iface", "bus", "bus_throttle";
			interconnects = <&gnoc 0 &mnoc 13>,
					<&mnoc 4 &bimc 5>;
			interconnect-names = "cpu-cfg", "video-mem";
			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
			iommus = <&mmss_smmu 0x400>,
				 <&mmss_smmu 0x401>,
				 <&mmss_smmu 0x40a>,
				 <&mmss_smmu 0x407>,
				 <&mmss_smmu 0x40e>,
				 <&mmss_smmu 0x40f>,
				 <&mmss_smmu 0x408>,
				 <&mmss_smmu 0x409>,
				 <&mmss_smmu 0x40b>,
				 <&mmss_smmu 0x40c>,
				 <&mmss_smmu 0x40d>,
				 <&mmss_smmu 0x410>,
				 <&mmss_smmu 0x421>,
				 <&mmss_smmu 0x428>,
				 <&mmss_smmu 0x429>,
				 <&mmss_smmu 0x42b>,
				 <&mmss_smmu 0x42c>,
				 <&mmss_smmu 0x42d>,
				 <&mmss_smmu 0x411>,
				 <&mmss_smmu 0x431>;
			memory-region = <&venus_region>;
			power-domains = <&mmcc VENUS_GDSC>;
			status = "disabled";

			video-decoder {
				compatible = "venus-decoder";
				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
				clock-names = "vcodec0_core";
				power-domains = <&mmcc VENUS_CORE0_GDSC>;
			};

			video-encoder {
				compatible = "venus-encoder";
				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
				clock-names = "vcodec0_core";
				power-domains = <&mmcc VENUS_CORE0_GDSC>;
			};
		};

		mmss_smmu: iommu@cd00000 {
			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
			reg = <0x0cd00000 0x40000>;

			clocks = <&mmcc MNOC_AHB_CLK>,
				 <&mmcc BIMC_SMMU_AHB_CLK>,
				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
				 <&mmcc BIMC_SMMU_AXI_CLK>;
			clock-names = "iface-mm", "iface-smmu",
				      "bus-mm", "bus-smmu";
			#global-interrupts = <2>;
			#iommu-cells = <1>;

			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		adsp_pil: remoteproc@15700000 {
			compatible = "qcom,sdm660-adsp-pas";
			reg = <0x15700000 0x4040>;

			interrupts-extended =
				<&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
				<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
				<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
				<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
				<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready",
					  "handover", "stop-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			memory-region = <&adsp_region>;
			power-domains = <&rpmpd SDM660_VDDCX>;
			power-domain-names = "cx";

			qcom,smem-states = <&adsp_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			glink-edge {
				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;

				label = "lpass";
				mboxes = <&apcs_glb 9>;
				qcom,remote-pid = <2>;
				#address-cells = <1>;
				#size-cells = <0>;

				apr {
					compatible = "qcom,apr-v2";
					qcom,glink-channels = "apr_audio_svc";
					qcom,apr-domain = <APR_DOMAIN_ADSP>;
					#address-cells = <1>;
					#size-cells = <0>;

					q6core {
						reg = <APR_SVC_ADSP_CORE>;
						compatible = "qcom,q6core";
					};

					q6afe: apr-service@4 {
						compatible = "qcom,q6afe";
						reg = <APR_SVC_AFE>;
						q6afedai: dais {
							compatible = "qcom,q6afe-dais";
							#address-cells = <1>;
							#size-cells = <0>;
							#sound-dai-cells = <1>;
						};
					};

					q6asm: apr-service@7 {
						compatible = "qcom,q6asm";
						reg = <APR_SVC_ASM>;
						q6asmdai: dais {
							compatible = "qcom,q6asm-dais";
							#address-cells = <1>;
							#size-cells = <0>;
							#sound-dai-cells = <1>;
							iommus = <&lpass_smmu 1>;
						};
					};

					q6adm: apr-service@8 {
						compatible = "qcom,q6adm";
						reg = <APR_SVC_ADM>;
						q6routing: routing {
							compatible = "qcom,q6adm-routing";
							#sound-dai-cells = <0>;
						};
					};
				};
			};
		};

		gnoc: interconnect@17900000 {
			compatible = "qcom,sdm660-gnoc";
			reg = <0x17900000 0xe000>;
			#interconnect-cells = <1>;
			/*
			 * This one apparently features no clocks,
			 * so let's not mess with the driver needlessly
			 */
			clock-names = "bus", "bus_a";
			clocks = <&xo_board>, <&xo_board>;
		};

		apcs_glb: mailbox@17911000 {
			compatible = "qcom,sdm660-apcs-hmss-global";
			reg = <0x17911000 0x1000>;

			#mbox-cells = <1>;
		};

		timer@17920000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			compatible = "arm,armv7-timer-mem";
			reg = <0x17920000 0x1000>;
			clock-frequency = <19200000>;

			frame@17921000 {
				frame-number = <0>;
				interrupts = <0 8 0x4>,
						<0 7 0x4>;
				reg = <0x17921000 0x1000>,
					<0x17922000 0x1000>;
			};

			frame@17923000 {
				frame-number = <1>;
				interrupts = <0 9 0x4>;
				reg = <0x17923000 0x1000>;
				status = "disabled";
			};

			frame@17924000 {
				frame-number = <2>;
				interrupts = <0 10 0x4>;
				reg = <0x17924000 0x1000>;
				status = "disabled";
			};

			frame@17925000 {
				frame-number = <3>;
				interrupts = <0 11 0x4>;
				reg = <0x17925000 0x1000>;
				status = "disabled";
			};

			frame@17926000 {
				frame-number = <4>;
				interrupts = <0 12 0x4>;
				reg = <0x17926000 0x1000>;
				status = "disabled";
			};

			frame@17927000 {
				frame-number = <5>;
				interrupts = <0 13 0x4>;
				reg = <0x17927000 0x1000>;
				status = "disabled";
			};

			frame@17928000 {
				frame-number = <6>;
				interrupts = <0 14 0x4>;
				reg = <0x17928000 0x1000>;
				status = "disabled";
			};
		};

		intc: interrupt-controller@17a00000 {
			compatible = "arm,gic-v3";
			reg = <0x17a00000 0x10000>,	   /* GICD */
				  <0x17b00000 0x100000>;	  /* GICR * 8 */
			#interrupt-cells = <3>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			interrupt-controller;
			#redistributor-regions = <1>;
			redistributor-stride = <0x0 0x20000>;
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
		};
	};

	tcsr_mutex: hwlock {
		compatible = "qcom,tcsr-mutex";
		syscon = <&tcsr_mutex_regs 0 0x1000>;
		#hwlock-cells = <1>;
	};

	sound: sound {
	};

	thermal-zones {
		aoss-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 0>;

			trips {
				aoss_alert0: trip-point0 {
					temperature = <105000>;
					hysteresis = <1000>;
					type = "hot";
				};
			};
		};

		cpuss0-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 1>;

			trips {
				cpuss0_alert0: trip-point0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "hot";
				};
			};
		};

		cpuss1-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 2>;

			trips {
				cpuss1_alert0: trip-point0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "hot";
				};
			};
		};

		cpu0-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 3>;

			trips {
				cpu0_alert0: trip-point0 {
					temperature = <70000>;
					hysteresis = <1000>;
					type = "passive";
				};

				cpu0_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu1-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 4>;

			trips {
				cpu1_alert0: trip-point0 {
					temperature = <70000>;
					hysteresis = <1000>;
					type = "passive";
				};

				cpu1_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu2-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 5>;

			trips {
				cpu2_alert0: trip-point0 {
					temperature = <70000>;
					hysteresis = <1000>;
					type = "passive";
				};

				cpu2_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu3-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 6>;

			trips {
				cpu3_alert0: trip-point0 {
					temperature = <70000>;
					hysteresis = <1000>;
					type = "passive";
				};

				cpu3_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		/*
		 * According to what downstream DTS says,
		 * the entire power efficient cluster has
		 * only a single thermal sensor.
		 */

		pwr-cluster-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 7>;

			trips {
				pwr_cluster_alert0: trip-point0 {
					temperature = <70000>;
					hysteresis = <1000>;
					type = "passive";
				};

				pwr_cluster_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		gpu-thermal {
			polling-delay-passive = <250>;
			polling-delay = <1000>;

			thermal-sensors = <&tsens 8>;

			trips {
				gpu_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <1000>;
					type = "hot";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 1 0xf08>,
				 <GIC_PPI 2 0xf08>,
				 <GIC_PPI 3 0xf08>,
				 <GIC_PPI 0 0xf08>;
	};
};