diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 2ba6d3a..b79ec0d 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -56,5 +56,22 @@
 	---help---
 	  Currently supports the LAN83C185 PHY
 
+config FIXED_PHY
+	tristate "Drivers for PHY emulation on fixed speed/link"
+	depends on PHYLIB
+	---help---
+	  Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
+	  but with the ability to manipulate with speed/link in software. The relavant MII
+	  speed/duplex parameters could be effectively handled in user-specified  fuction.
+	  Currently tested with mpc866ads.
+
+config FIXED_MII_10_FDX
+	bool "Emulation for 10M Fdx fixed PHY behavior"
+	depends on FIXED_PHY
+
+config FIXED_MII_100_FDX
+	bool "Emulation for 100M Fdx fixed PHY behavior"
+	depends on FIXED_PHY
+
 endmenu
 
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index a00e619..320f832 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -10,3 +10,4 @@
 obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
 obj-$(CONFIG_SMSC_PHY)		+= smsc.o
 obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
new file mode 100644
index 0000000..341036d
--- /dev/null
+++ b/drivers/net/phy/fixed.c
@@ -0,0 +1,358 @@
+/*
+ * drivers/net/phy/fixed.c
+ *
+ * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
+ *
+ * Author: Vitaly Bordug
+ *
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_REGS_NUM	7
+
+/*
+    The idea is to emulate normal phy behavior by responding with
+    pre-defined values to mii BMCR read, so that read_status hook could
+    take all the needed info.
+*/
+
+struct fixed_phy_status {
+	u8 	link;
+	u16	speed;
+	u8 	duplex;
+};
+
+/*-----------------------------------------------------------------------------
+ *  Private information hoder for mii_bus
+ *-----------------------------------------------------------------------------*/
+struct fixed_info {
+	u16 *regs;
+	u8 regs_num;
+	struct fixed_phy_status phy_status;
+	struct phy_device *phydev; /* pointer to the container */
+	/* link & speed cb */
+	int(*link_update)(struct net_device*, struct fixed_phy_status*);
+
+};
+
+/*-----------------------------------------------------------------------------
+ *  If something weird is required to be done with link/speed,
+ * network driver is able to assign a function to implement this.
+ * May be useful for PHY's that need to be software-driven.
+ *-----------------------------------------------------------------------------*/
+int fixed_mdio_set_link_update(struct phy_device* phydev,
+		int(*link_update)(struct net_device*, struct fixed_phy_status*))
+{
+	struct fixed_info *fixed;
+
+	if(link_update == NULL)
+		return -EINVAL;
+
+	if(phydev) {
+		if(phydev->bus)	{
+			fixed = phydev->bus->priv;
+			fixed->link_update = link_update;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+EXPORT_SYMBOL(fixed_mdio_set_link_update);
+
+/*-----------------------------------------------------------------------------
+ *  This is used for updating internal mii regs from the status
+ *-----------------------------------------------------------------------------*/
+static int fixed_mdio_update_regs(struct fixed_info *fixed)
+{
+	u16 *regs = fixed->regs;
+	u16 bmsr = 0;
+	u16 bmcr = 0;
+
+	if(!regs) {
+		printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	if(fixed->phy_status.link)
+		bmsr |= BMSR_LSTATUS;
+
+	if(fixed->phy_status.duplex) {
+		bmcr |= BMCR_FULLDPLX;
+
+		switch ( fixed->phy_status.speed ) {
+		case 100:
+			bmsr |= BMSR_100FULL;
+			bmcr |= BMCR_SPEED100;
+		break;
+
+		case 10:
+			bmsr |= BMSR_10FULL;
+		break;
+		}
+	} else {
+		switch ( fixed->phy_status.speed ) {
+		case 100:
+			bmsr |= BMSR_100HALF;
+			bmcr |= BMCR_SPEED100;
+		break;
+
+		case 10:
+			bmsr |= BMSR_100HALF;
+		break;
+		}
+	}
+
+	regs[MII_BMCR] =  bmcr;
+	regs[MII_BMSR] =  bmsr | 0x800; /*we are always capable of 10 hdx*/
+
+	return 0;
+}
+
+static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
+{
+	struct fixed_info *fixed = bus->priv;
+
+	/* if user has registered link update callback, use it */
+	if(fixed->phydev)
+		if(fixed->phydev->attached_dev) {
+			if(fixed->link_update) {
+				fixed->link_update(fixed->phydev->attached_dev,
+						&fixed->phy_status);
+				fixed_mdio_update_regs(fixed);
+			}
+	}
+
+	if ((unsigned int)location >= fixed->regs_num)
+		return -1;
+	return fixed->regs[location];
+}
+
+static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val)
+{
+	/* do nothing for now*/
+	return 0;
+}
+
+static int fixed_mii_reset(struct mii_bus *bus)
+{
+	/*nothing here - no way/need to reset it*/
+	return 0;
+}
+
+static int fixed_config_aneg(struct phy_device *phydev)
+{
+	/* :TODO:03/13/2006 09:45:37 PM::
+	 The full autoneg funcionality can be emulated,
+	 but no need to have anything here for now
+	 */
+	return 0;
+}
+
+/*-----------------------------------------------------------------------------
+ * the manual bind will do the magic - with phy_id_mask == 0
+ * match will never return true...
+ *-----------------------------------------------------------------------------*/
+static struct phy_driver fixed_mdio_driver = {
+	.name		= "Fixed PHY",
+	.features	= PHY_BASIC_FEATURES,
+	.config_aneg	= fixed_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+/*-----------------------------------------------------------------------------
+ *  This func is used to create all the necessary stuff, bind
+ * the fixed phy driver and register all it on the mdio_bus_type.
+ * speed is either 10 or 100, duplex is boolean.
+ * number is used to create multiple fixed PHYs, so that several devices can
+ * utilize them simultaneously.
+ *-----------------------------------------------------------------------------*/
+static int fixed_mdio_register_device(int number, int speed, int duplex)
+{
+	struct mii_bus *new_bus;
+	struct fixed_info *fixed;
+	struct phy_device *phydev;
+	int err = 0;
+
+	struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+
+	if (NULL == dev)
+		return -ENOMEM;
+
+	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+	if (NULL == new_bus) {
+		kfree(dev);
+		return -ENOMEM;
+	}
+	fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
+
+	if (NULL == fixed) {
+		kfree(dev);
+		kfree(new_bus);
+		return -ENOMEM;
+	}
+
+	fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
+	fixed->regs_num = MII_REGS_NUM;
+	fixed->phy_status.speed = speed;
+	fixed->phy_status.duplex = duplex;
+	fixed->phy_status.link = 1;
+
+	new_bus->name = "Fixed MII Bus",
+	new_bus->read = &fixed_mii_read,
+	new_bus->write = &fixed_mii_write,
+	new_bus->reset = &fixed_mii_reset,
+
+	/*set up workspace*/
+	fixed_mdio_update_regs(fixed);
+	new_bus->priv = fixed;
+
+	new_bus->dev = dev;
+	dev_set_drvdata(dev, new_bus);
+
+	/* create phy_device and register it on the mdio bus */
+	phydev = phy_device_create(new_bus, 0, 0);
+
+	/*
+	 Put the phydev pointer into the fixed pack so that bus read/write code could
+	 be able to access for instance attached netdev. Well it doesn't have to do
+	 so, only in case of utilizing user-specified link-update...
+	 */
+	fixed->phydev = phydev;
+
+	if(NULL == phydev) {
+		err = -ENOMEM;
+		goto device_create_fail;
+	}
+
+	phydev->irq = -1;
+	phydev->dev.bus = &mdio_bus_type;
+
+	if(number)
+		snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
+				"fixed_%d@%d:%d", number, speed, duplex);
+	else
+		snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
+				"fixed@%d:%d", speed, duplex);
+	phydev->bus = new_bus;
+
+	err = device_register(&phydev->dev);
+	if(err) {
+		printk(KERN_ERR "Phy %s failed to register\n",
+				phydev->dev.bus_id);
+		goto bus_register_fail;
+	}
+
+	/*
+	   the mdio bus has phy_id match... In order not to do it
+	   artificially, we are binding the driver here by hand;
+	   it will be the same for all the fixed phys anyway.
+	 */
+	down_write(&phydev->dev.bus->subsys.rwsem);
+
+	phydev->dev.driver = &fixed_mdio_driver.driver;
+
+	err = phydev->dev.driver->probe(&phydev->dev);
+	if(err < 0) {
+		printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id);
+		up_write(&phydev->dev.bus->subsys.rwsem);
+		goto probe_fail;
+	}
+
+	device_bind_driver(&phydev->dev);
+	up_write(&phydev->dev.bus->subsys.rwsem);
+
+	return 0;
+
+probe_fail:
+	device_unregister(&phydev->dev);
+bus_register_fail:
+	kfree(phydev);
+device_create_fail:
+	kfree(dev);
+	kfree(new_bus);
+	kfree(fixed);
+
+	return err;
+}
+
+
+MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
+MODULE_AUTHOR("Vitaly Bordug");
+MODULE_LICENSE("GPL");
+
+static int __init fixed_init(void)
+{
+	int ret;
+	int duplex = 0;
+
+	/* register on the bus... Not expected to be matched with anything there... */
+	phy_driver_register(&fixed_mdio_driver);
+
+	/* So let the fun begin...
+	   We will create several mdio devices here, and will bound the upper
+	   driver to them.
+
+	   Then the external software can lookup the phy bus by searching
+	   fixed@speed:duplex, e.g. fixed@100:1, to be connected to the
+	   virtual 100M Fdx phy.
+
+	   In case several virtual PHYs required, the bus_id will be in form
+	   fixed_<num>@<speed>:<duplex>, which make it able even to define
+	   driver-specific link control callback, if for instance PHY is completely
+	   SW-driven.
+
+	*/
+
+#ifdef CONFIG_FIXED_MII_DUPLEX
+	duplex = 1;
+#endif
+
+#ifdef CONFIG_FIXED_MII_100_FDX
+	fixed_mdio_register_device(0, 100, 1);
+#endif
+
+#ifdef CONFIX_FIXED_MII_10_FDX
+	fixed_mdio_register_device(0, 10, 1);
+#endif
+	return 0;
+}
+
+static void __exit fixed_exit(void)
+{
+	phy_driver_unregister(&fixed_mdio_driver);
+	/* :WARNING:02/18/2006 04:32:40 AM:: Cleanup all the created stuff */
+}
+
+module_init(fixed_init);
+module_exit(fixed_exit);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 1dde390..cf6660c 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -159,6 +159,7 @@
 	.suspend	= mdio_bus_suspend,
 	.resume		= mdio_bus_resume,
 };
+EXPORT_SYMBOL(mdio_bus_type);
 
 int __init mdio_bus_init(void)
 {
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 1bc1e03..2d1ecfd 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -45,6 +45,35 @@
 extern int mdio_bus_init(void);
 extern void mdio_bus_exit(void);
 
+struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+{
+	struct phy_device *dev;
+	/* We allocate the device, and initialize the
+	 * default values */
+	dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
+
+	if (NULL == dev)
+		return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
+
+	dev->speed = 0;
+	dev->duplex = -1;
+	dev->pause = dev->asym_pause = 0;
+	dev->link = 1;
+
+	dev->autoneg = AUTONEG_ENABLE;
+
+	dev->addr = addr;
+	dev->phy_id = phy_id;
+	dev->bus = bus;
+
+	dev->state = PHY_DOWN;
+
+	spin_lock_init(&dev->lock);
+
+	return dev;
+}
+EXPORT_SYMBOL(phy_device_create);
+
 /* get_phy_device
  *
  * description: Reads the ID registers of the PHY at addr on the
@@ -78,27 +107,7 @@
 	if (0xffffffff == phy_id)
 		return NULL;
 
-	/* Otherwise, we allocate the device, and initialize the
-	 * default values */
-	dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
-
-	if (NULL == dev)
-		return ERR_PTR(-ENOMEM);
-
-	dev->speed = 0;
-	dev->duplex = -1;
-	dev->pause = dev->asym_pause = 0;
-	dev->link = 1;
-
-	dev->autoneg = AUTONEG_ENABLE;
-
-	dev->addr = addr;
-	dev->phy_id = phy_id;
-	dev->bus = bus;
-
-	dev->state = PHY_DOWN;
-
-	spin_lock_init(&dev->lock);
+	dev = phy_device_create(bus, addr, phy_id);
 
 	return dev;
 }
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 331521a..9447a57 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -378,6 +378,7 @@
 		struct mii_ioctl_data *mii_data, int cmd);
 int phy_start_interrupts(struct phy_device *phydev);
 void phy_print_status(struct phy_device *phydev);
+struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
 
 extern struct bus_type mdio_bus_type;
 #endif /* __PHY_H */