dw_dmac: disable dma in optimal way in probe
The dw_dma_off call needs to have the all_chan_mask calculated. So, done this
calculations before the call. Moreover, remove duplicate code that masks the
DMA interrupts.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 41f03f3..8a37f6d 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -1431,6 +1431,9 @@
}
clk_prepare_enable(dw->clk);
+ /* Calculate all channel mask before DMA setup */
+ dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
/* force dma off, just in case */
dw_dma_off(dw);
@@ -1442,8 +1445,6 @@
tasklet_init(&dw->tasklet, dw_dma_tasklet, (unsigned long)dw);
- dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
-
INIT_LIST_HEAD(&dw->dma.channels);
for (i = 0; i < pdata->nr_channels; i++) {
struct dw_dma_chan *dwc = &dw->chan[i];
@@ -1473,17 +1474,12 @@
channel_clear_bit(dw, CH_EN, dwc->mask);
}
- /* Clear/disable all interrupts on all channels. */
+ /* Clear all interrupts on all channels. */
dma_writel(dw, CLEAR.XFER, dw->all_chan_mask);
dma_writel(dw, CLEAR.SRC_TRAN, dw->all_chan_mask);
dma_writel(dw, CLEAR.DST_TRAN, dw->all_chan_mask);
dma_writel(dw, CLEAR.ERROR, dw->all_chan_mask);
- channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask);
- channel_clear_bit(dw, MASK.SRC_TRAN, dw->all_chan_mask);
- channel_clear_bit(dw, MASK.DST_TRAN, dw->all_chan_mask);
- channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask);
-
dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
if (pdata->is_private)
