arm64: dts: intel: socfpga: override clocks by label
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index a7a83f2..f14a89c 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -41,14 +41,6 @@ memory {
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
-
- soc {
- clocks {
- osc1 {
- clock-frequency = <25000000>;
- };
- };
- };
};
&gpio1 {
@@ -92,6 +84,10 @@ &mmc {
bus-width = <4>;
};
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
index 979aa59a..58a827a 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -41,14 +41,6 @@ memory {
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
-
- soc {
- clocks {
- osc1 {
- clock-frequency = <25000000>;
- };
- };
- };
};
&gpio1 {
@@ -121,6 +113,10 @@ partition@4280000 {
};
};
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 5f56e26..01f1307 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -23,14 +23,6 @@ memory {
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
-
- soc {
- clocks {
- osc1 {
- clock-frequency = <25000000>;
- };
- };
- };
};
&clkmgr {
@@ -44,6 +36,10 @@ &mmc {
bus-width = <4>;
};
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
&uart0 {
status = "okay";
};
