Merge remote-tracking branches 'spi/topic/qup', 'spi/topic/rockchip', 'spi/topic/rspi', 'spi/topic/s3c64xx' and 'spi/topic/sc18is602' into spi-next
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
index e2c88df..5c09077 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -33,6 +33,11 @@
nodes. If unspecified, a single SPI device without a chip
select can be used.
+- dmas: Two DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+ least one channel named "tx" for transmit and named "rx" for
+ receive.
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -51,6 +56,9 @@
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
+ dma-names = "rx", "tx";
+
pinctrl-names = "default";
pinctrl-0 = <&spi8_default>;
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index 467dec4..0c491bd 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -24,6 +24,9 @@
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "tx" and "rx" if present.
+- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
+ Rx data (may need to be fine tuned for high capacitance lines).
+ No delay (0) by default.
Example:
@@ -33,6 +36,7 @@
reg = <0xff110000 0x1000>;
dmas = <&pdma1 11>, <&pdma1 12>;
dma-names = "tx", "rx";
+ rx-sample-delay-ns = <10>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 2b2c359..810a7fa 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -22,6 +22,8 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#define QUP_CONFIG 0x0000
#define QUP_STATE 0x0004
@@ -116,6 +118,8 @@
#define SPI_NUM_CHIPSELECTS 4
+#define SPI_MAX_DMA_XFER (SZ_64K - 64)
+
/* high speed mode is when bus rate is greater then 26MHz */
#define SPI_HS_MIN_RATE 26000000
#define SPI_MAX_RATE 50000000
@@ -140,9 +144,14 @@
struct completion done;
int error;
int w_size; /* bytes per SPI word */
+ int n_words;
int tx_bytes;
int rx_bytes;
int qup_v1;
+
+ int use_dma;
+ struct dma_slave_config rx_conf;
+ struct dma_slave_config tx_conf;
};
@@ -198,7 +207,6 @@
return 0;
}
-
static void spi_qup_fifo_read(struct spi_qup *controller,
struct spi_transfer *xfer)
{
@@ -266,6 +274,107 @@
}
}
+static void spi_qup_dma_done(void *data)
+{
+ struct spi_qup *qup = data;
+
+ complete(&qup->done);
+}
+
+static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
+ enum dma_transfer_direction dir,
+ dma_async_tx_callback callback)
+{
+ struct spi_qup *qup = spi_master_get_devdata(master);
+ unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl;
+ struct dma_chan *chan;
+ dma_cookie_t cookie;
+ unsigned int nents;
+
+ if (dir == DMA_MEM_TO_DEV) {
+ chan = master->dma_tx;
+ nents = xfer->tx_sg.nents;
+ sgl = xfer->tx_sg.sgl;
+ } else {
+ chan = master->dma_rx;
+ nents = xfer->rx_sg.nents;
+ sgl = xfer->rx_sg.sgl;
+ }
+
+ desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
+ if (!desc)
+ return -EINVAL;
+
+ desc->callback = callback;
+ desc->callback_param = qup;
+
+ cookie = dmaengine_submit(desc);
+
+ return dma_submit_error(cookie);
+}
+
+static void spi_qup_dma_terminate(struct spi_master *master,
+ struct spi_transfer *xfer)
+{
+ if (xfer->tx_buf)
+ dmaengine_terminate_all(master->dma_tx);
+ if (xfer->rx_buf)
+ dmaengine_terminate_all(master->dma_rx);
+}
+
+static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer)
+{
+ dma_async_tx_callback rx_done = NULL, tx_done = NULL;
+ int ret;
+
+ if (xfer->rx_buf)
+ rx_done = spi_qup_dma_done;
+ else if (xfer->tx_buf)
+ tx_done = spi_qup_dma_done;
+
+ if (xfer->rx_buf) {
+ ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done);
+ if (ret)
+ return ret;
+
+ dma_async_issue_pending(master->dma_rx);
+ }
+
+ if (xfer->tx_buf) {
+ ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV, tx_done);
+ if (ret)
+ return ret;
+
+ dma_async_issue_pending(master->dma_tx);
+ }
+
+ return 0;
+}
+
+static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer)
+{
+ struct spi_qup *qup = spi_master_get_devdata(master);
+ int ret;
+
+ ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+ if (ret) {
+ dev_warn(qup->dev, "cannot set RUN state\n");
+ return ret;
+ }
+
+ ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
+ if (ret) {
+ dev_warn(qup->dev, "cannot set PAUSE state\n");
+ return ret;
+ }
+
+ spi_qup_fifo_write(qup, xfer);
+
+ return 0;
+}
+
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
{
struct spi_qup *controller = dev_id;
@@ -315,11 +424,13 @@
error = -EIO;
}
- if (opflags & QUP_OP_IN_SERVICE_FLAG)
- spi_qup_fifo_read(controller, xfer);
+ if (!controller->use_dma) {
+ if (opflags & QUP_OP_IN_SERVICE_FLAG)
+ spi_qup_fifo_read(controller, xfer);
- if (opflags & QUP_OP_OUT_SERVICE_FLAG)
- spi_qup_fifo_write(controller, xfer);
+ if (opflags & QUP_OP_OUT_SERVICE_FLAG)
+ spi_qup_fifo_write(controller, xfer);
+ }
spin_lock_irqsave(&controller->lock, flags);
controller->error = error;
@@ -332,13 +443,35 @@
return IRQ_HANDLED;
}
+static u32
+spi_qup_get_mode(struct spi_master *master, struct spi_transfer *xfer)
+{
+ struct spi_qup *qup = spi_master_get_devdata(master);
+ u32 mode;
+
+ qup->w_size = 4;
+
+ if (xfer->bits_per_word <= 8)
+ qup->w_size = 1;
+ else if (xfer->bits_per_word <= 16)
+ qup->w_size = 2;
+
+ qup->n_words = xfer->len / qup->w_size;
+
+ if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
+ mode = QUP_IO_M_MODE_FIFO;
+ else
+ mode = QUP_IO_M_MODE_BLOCK;
+
+ return mode;
+}
/* set clock freq ... bits per word */
static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
u32 config, iomode, mode, control;
- int ret, n_words, w_size;
+ int ret, n_words;
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
dev_err(controller->dev, "too big size for loopback %d > %d\n",
@@ -358,35 +491,54 @@
return -EIO;
}
- w_size = 4;
- if (xfer->bits_per_word <= 8)
- w_size = 1;
- else if (xfer->bits_per_word <= 16)
- w_size = 2;
+ mode = spi_qup_get_mode(spi->master, xfer);
+ n_words = controller->n_words;
- n_words = xfer->len / w_size;
- controller->w_size = w_size;
-
- if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
- mode = QUP_IO_M_MODE_FIFO;
+ if (mode == QUP_IO_M_MODE_FIFO) {
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
/* must be zero for FIFO */
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
- } else {
- mode = QUP_IO_M_MODE_BLOCK;
+ } else if (!controller->use_dma) {
writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
/* must be zero for BLOCK and BAM */
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
+ } else {
+ mode = QUP_IO_M_MODE_BAM;
+ writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
+ writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
+
+ if (!controller->qup_v1) {
+ void __iomem *input_cnt;
+
+ input_cnt = controller->base + QUP_MX_INPUT_CNT;
+ /*
+ * for DMA transfers, both QUP_MX_INPUT_CNT and
+ * QUP_MX_OUTPUT_CNT must be zero to all cases but one.
+ * That case is a non-balanced transfer when there is
+ * only a rx_buf.
+ */
+ if (xfer->tx_buf)
+ writel_relaxed(0, input_cnt);
+ else
+ writel_relaxed(n_words, input_cnt);
+
+ writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
+ }
}
iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
/* Set input and output transfer mode */
iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
- iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
+
+ if (!controller->use_dma)
+ iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
+ else
+ iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
+
iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
@@ -428,11 +580,31 @@
config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
config |= xfer->bits_per_word - 1;
config |= QUP_CONFIG_SPI_MODE;
+
+ if (controller->use_dma) {
+ if (!xfer->tx_buf)
+ config |= QUP_CONFIG_NO_OUTPUT;
+ if (!xfer->rx_buf)
+ config |= QUP_CONFIG_NO_INPUT;
+ }
+
writel_relaxed(config, controller->base + QUP_CONFIG);
/* only write to OPERATIONAL_MASK when register is present */
- if (!controller->qup_v1)
- writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
+ if (!controller->qup_v1) {
+ u32 mask = 0;
+
+ /*
+ * mask INPUT and OUTPUT service flags to prevent IRQs on FIFO
+ * status change in BAM mode
+ */
+
+ if (mode == QUP_IO_M_MODE_BAM)
+ mask = QUP_OP_IN_SERVICE_FLAG | QUP_OP_OUT_SERVICE_FLAG;
+
+ writel_relaxed(mask, controller->base + QUP_OPERATIONAL_MASK);
+ }
+
return 0;
}
@@ -461,17 +633,13 @@
controller->tx_bytes = 0;
spin_unlock_irqrestore(&controller->lock, flags);
- if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
- dev_warn(controller->dev, "cannot set RUN state\n");
- goto exit;
- }
+ if (controller->use_dma)
+ ret = spi_qup_do_dma(master, xfer);
+ else
+ ret = spi_qup_do_pio(master, xfer);
- if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
- dev_warn(controller->dev, "cannot set PAUSE state\n");
+ if (ret)
goto exit;
- }
-
- spi_qup_fifo_write(controller, xfer);
if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
dev_warn(controller->dev, "cannot set EXECUTE state\n");
@@ -480,6 +648,7 @@
if (!wait_for_completion_timeout(&controller->done, timeout))
ret = -ETIMEDOUT;
+
exit:
spi_qup_set_state(controller, QUP_STATE_RESET);
spin_lock_irqsave(&controller->lock, flags);
@@ -487,6 +656,97 @@
if (!ret)
ret = controller->error;
spin_unlock_irqrestore(&controller->lock, flags);
+
+ if (ret && controller->use_dma)
+ spi_qup_dma_terminate(master, xfer);
+
+ return ret;
+}
+
+static bool spi_qup_can_dma(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct spi_qup *qup = spi_master_get_devdata(master);
+ size_t dma_align = dma_get_cache_alignment();
+ u32 mode;
+
+ qup->use_dma = 0;
+
+ if (xfer->rx_buf && (xfer->len % qup->in_blk_sz ||
+ IS_ERR_OR_NULL(master->dma_rx) ||
+ !IS_ALIGNED((size_t)xfer->rx_buf, dma_align)))
+ return false;
+
+ if (xfer->tx_buf && (xfer->len % qup->out_blk_sz ||
+ IS_ERR_OR_NULL(master->dma_tx) ||
+ !IS_ALIGNED((size_t)xfer->tx_buf, dma_align)))
+ return false;
+
+ mode = spi_qup_get_mode(master, xfer);
+ if (mode == QUP_IO_M_MODE_FIFO)
+ return false;
+
+ qup->use_dma = 1;
+
+ return true;
+}
+
+static void spi_qup_release_dma(struct spi_master *master)
+{
+ if (!IS_ERR_OR_NULL(master->dma_rx))
+ dma_release_channel(master->dma_rx);
+ if (!IS_ERR_OR_NULL(master->dma_tx))
+ dma_release_channel(master->dma_tx);
+}
+
+static int spi_qup_init_dma(struct spi_master *master, resource_size_t base)
+{
+ struct spi_qup *spi = spi_master_get_devdata(master);
+ struct dma_slave_config *rx_conf = &spi->rx_conf,
+ *tx_conf = &spi->tx_conf;
+ struct device *dev = spi->dev;
+ int ret;
+
+ /* allocate dma resources, if available */
+ master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(master->dma_rx))
+ return PTR_ERR(master->dma_rx);
+
+ master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(master->dma_tx)) {
+ ret = PTR_ERR(master->dma_tx);
+ goto err_tx;
+ }
+
+ /* set DMA parameters */
+ rx_conf->direction = DMA_DEV_TO_MEM;
+ rx_conf->device_fc = 1;
+ rx_conf->src_addr = base + QUP_INPUT_FIFO;
+ rx_conf->src_maxburst = spi->in_blk_sz;
+
+ tx_conf->direction = DMA_MEM_TO_DEV;
+ tx_conf->device_fc = 1;
+ tx_conf->dst_addr = base + QUP_OUTPUT_FIFO;
+ tx_conf->dst_maxburst = spi->out_blk_sz;
+
+ ret = dmaengine_slave_config(master->dma_rx, rx_conf);
+ if (ret) {
+ dev_err(dev, "failed to configure RX channel\n");
+ goto err;
+ }
+
+ ret = dmaengine_slave_config(master->dma_tx, tx_conf);
+ if (ret) {
+ dev_err(dev, "failed to configure TX channel\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ dma_release_channel(master->dma_tx);
+err_tx:
+ dma_release_channel(master->dma_rx);
return ret;
}
@@ -563,6 +823,8 @@
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
+ master->dma_alignment = dma_get_cache_alignment();
+ master->max_dma_len = SPI_MAX_DMA_XFER;
platform_set_drvdata(pdev, master);
@@ -574,6 +836,12 @@
controller->cclk = cclk;
controller->irq = irq;
+ ret = spi_qup_init_dma(master, res->start);
+ if (ret == -EPROBE_DEFER)
+ goto error;
+ else if (!ret)
+ master->can_dma = spi_qup_can_dma;
+
/* set v1 flag if device is version 1 */
if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
controller->qup_v1 = 1;
@@ -610,7 +878,7 @@
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
if (ret) {
dev_err(dev, "cannot set RESET state\n");
- goto error;
+ goto error_dma;
}
writel_relaxed(0, base + QUP_OPERATIONAL);
@@ -634,7 +902,7 @@
ret = devm_request_irq(dev, irq, spi_qup_qup_irq,
IRQF_TRIGGER_HIGH, pdev->name, controller);
if (ret)
- goto error;
+ goto error_dma;
pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
pm_runtime_use_autosuspend(dev);
@@ -649,6 +917,8 @@
disable_pm:
pm_runtime_disable(&pdev->dev);
+error_dma:
+ spi_qup_release_dma(master);
error:
clk_disable_unprepare(cclk);
clk_disable_unprepare(iclk);
@@ -740,6 +1010,8 @@
if (ret)
return ret;
+ spi_qup_release_dma(master);
+
clk_disable_unprepare(controller->cclk);
clk_disable_unprepare(controller->iclk);
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 5e4e52c..68e7efe 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -179,6 +179,7 @@
u8 tmode;
u8 bpw;
u8 n_bytes;
+ u8 rsd_nsecs;
unsigned len;
u32 speed;
@@ -302,8 +303,8 @@
return 0;
}
-static int rockchip_spi_unprepare_message(struct spi_master *master,
- struct spi_message *msg)
+static void rockchip_spi_handle_err(struct spi_master *master,
+ struct spi_message *msg)
{
unsigned long flags;
struct rockchip_spi *rs = spi_master_get_devdata(master);
@@ -313,8 +314,8 @@
/*
* For DMA mode, we need terminate DMA channel and flush
* fifo for the next transfer if DMA thansfer timeout.
- * unprepare_message() was called by core if transfer complete
- * or timeout. Maybe it is reasonable for error handling here.
+ * handle_err() was called by core if transfer failed.
+ * Maybe it is reasonable for error handling here.
*/
if (rs->use_dma) {
if (rs->state & RXBUSY) {
@@ -327,6 +328,12 @@
}
spin_unlock_irqrestore(&rs->lock, flags);
+}
+
+static int rockchip_spi_unprepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct rockchip_spi *rs = spi_master_get_devdata(master);
spi_enable_chip(rs, 0);
@@ -493,6 +500,7 @@
{
u32 div = 0;
u32 dmacr = 0;
+ int rsd = 0;
u32 cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET)
| (CR0_SSD_ONE << CR0_SSD_OFFSET);
@@ -522,6 +530,20 @@
div = DIV_ROUND_UP(rs->max_freq, rs->speed);
div = (div + 1) & 0xfffe;
+ /* Rx sample delay is expressed in parent clock cycles (max 3) */
+ rsd = DIV_ROUND_CLOSEST(rs->rsd_nsecs * (rs->max_freq >> 8),
+ 1000000000 >> 8);
+ if (!rsd && rs->rsd_nsecs) {
+ pr_warn_once("rockchip-spi: %u Hz are too slow to express %u ns delay\n",
+ rs->max_freq, rs->rsd_nsecs);
+ } else if (rsd > 3) {
+ rsd = 3;
+ pr_warn_once("rockchip-spi: %u Hz are too fast to express %u ns delay, clamping at %u ns\n",
+ rs->max_freq, rs->rsd_nsecs,
+ rsd * 1000000000U / rs->max_freq);
+ }
+ cr0 |= rsd << CR0_RSD_OFFSET;
+
writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0);
writel_relaxed(rs->len - 1, rs->regs + ROCKCHIP_SPI_CTRLR1);
@@ -614,6 +636,7 @@
struct rockchip_spi *rs;
struct spi_master *master;
struct resource *mem;
+ u32 rsd_nsecs;
master = spi_alloc_master(&pdev->dev, sizeof(struct rockchip_spi));
if (!master)
@@ -665,6 +688,10 @@
rs->dev = &pdev->dev;
rs->max_freq = clk_get_rate(rs->spiclk);
+ if (!of_property_read_u32(pdev->dev.of_node, "rx-sample-delay-ns",
+ &rsd_nsecs))
+ rs->rsd_nsecs = rsd_nsecs;
+
rs->fifo_len = get_fifo_len(rs);
if (!rs->fifo_len) {
dev_err(&pdev->dev, "Failed to get fifo length\n");
@@ -688,6 +715,7 @@
master->prepare_message = rockchip_spi_prepare_message;
master->unprepare_message = rockchip_spi_unprepare_message;
master->transfer_one = rockchip_spi_transfer_one;
+ master->handle_err = rockchip_spi_handle_err;
rs->dma_tx.ch = dma_request_slave_channel(rs->dev, "tx");
if (!rs->dma_tx.ch)
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 46ce470..186924a 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -177,6 +177,13 @@
#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */
#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
+/* QSPI on R-Car Gen2 */
+#define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */
+#define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */
+#define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */
+#define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */
+
+#define QSPI_BUFFER_SIZE 32u
struct rspi_data {
void __iomem *addr;
@@ -366,6 +373,52 @@
return 0;
}
+static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg)
+{
+ u8 data;
+
+ data = rspi_read8(rspi, reg);
+ data &= ~mask;
+ data |= (val & mask);
+ rspi_write8(rspi, data, reg);
+}
+
+static int qspi_set_send_trigger(struct rspi_data *rspi, unsigned int len)
+{
+ unsigned int n;
+
+ n = min(len, QSPI_BUFFER_SIZE);
+
+ if (len >= QSPI_BUFFER_SIZE) {
+ /* sets triggering number to 32 bytes */
+ qspi_update(rspi, SPBFCR_TXTRG_MASK,
+ SPBFCR_TXTRG_32B, QSPI_SPBFCR);
+ } else {
+ /* sets triggering number to 1 byte */
+ qspi_update(rspi, SPBFCR_TXTRG_MASK,
+ SPBFCR_TXTRG_1B, QSPI_SPBFCR);
+ }
+
+ return n;
+}
+
+static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
+{
+ unsigned int n;
+
+ n = min(len, QSPI_BUFFER_SIZE);
+
+ if (len >= QSPI_BUFFER_SIZE) {
+ /* sets triggering number to 32 bytes */
+ qspi_update(rspi, SPBFCR_RXTRG_MASK,
+ SPBFCR_RXTRG_32B, QSPI_SPBFCR);
+ } else {
+ /* sets triggering number to 1 byte */
+ qspi_update(rspi, SPBFCR_RXTRG_MASK,
+ SPBFCR_RXTRG_1B, QSPI_SPBFCR);
+ }
+}
+
#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
@@ -609,18 +662,28 @@
return __rspi_can_dma(rspi, xfer);
}
+static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
+ struct spi_transfer *xfer)
+{
+ if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
+ /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
+ int ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
+ xfer->rx_buf ? &xfer->rx_sg : NULL);
+ if (ret != -EAGAIN)
+ return 0;
+ }
+
+ return -EAGAIN;
+}
+
static int rspi_common_transfer(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
int ret;
- if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
- /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
- ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
- xfer->rx_buf ? &xfer->rx_sg : NULL);
- if (ret != -EAGAIN)
- return ret;
- }
+ ret = rspi_dma_check_then_transfer(rspi, xfer);
+ if (ret != -EAGAIN)
+ return ret;
ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
if (ret < 0)
@@ -661,12 +724,59 @@
return rspi_common_transfer(rspi, xfer);
}
+static int qspi_trigger_transfer_out_int(struct rspi_data *rspi, const u8 *tx,
+ u8 *rx, unsigned int len)
+{
+ int i, n, ret;
+ int error;
+
+ while (len > 0) {
+ n = qspi_set_send_trigger(rspi, len);
+ qspi_set_receive_trigger(rspi, len);
+ if (n == QSPI_BUFFER_SIZE) {
+ error = rspi_wait_for_tx_empty(rspi);
+ if (error < 0) {
+ dev_err(&rspi->master->dev, "transmit timeout\n");
+ return error;
+ }
+ for (i = 0; i < n; i++)
+ rspi_write_data(rspi, *tx++);
+
+ error = rspi_wait_for_rx_full(rspi);
+ if (error < 0) {
+ dev_err(&rspi->master->dev, "receive timeout\n");
+ return error;
+ }
+ for (i = 0; i < n; i++)
+ *rx++ = rspi_read_data(rspi);
+ } else {
+ ret = rspi_pio_transfer(rspi, tx, rx, n);
+ if (ret < 0)
+ return ret;
+ }
+ len -= n;
+ }
+
+ return 0;
+}
+
static int qspi_transfer_out_in(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
+ int ret;
+
qspi_receive_init(rspi);
- return rspi_common_transfer(rspi, xfer);
+ ret = rspi_dma_check_then_transfer(rspi, xfer);
+ if (ret != -EAGAIN)
+ return ret;
+
+ ret = qspi_trigger_transfer_out_int(rspi, xfer->tx_buf,
+ xfer->rx_buf, xfer->len);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 9231c34..b1c6731 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -324,7 +324,7 @@
/* Acquire DMA channels */
sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter,
- (void *)sdd->rx_dma.dmach, dev, "rx");
+ (void *)(long)sdd->rx_dma.dmach, dev, "rx");
if (!sdd->rx_dma.ch) {
dev_err(dev, "Failed to get RX DMA channel\n");
ret = -EBUSY;
@@ -333,7 +333,7 @@
spi->dma_rx = sdd->rx_dma.ch;
sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter,
- (void *)sdd->tx_dma.dmach, dev, "tx");
+ (void *)(long)sdd->tx_dma.dmach, dev, "tx");
if (!sdd->tx_dma.ch) {
dev_err(dev, "Failed to get TX DMA channel\n");
ret = -EBUSY;
diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index 5a56acf..36af4d4 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -286,7 +286,7 @@
hw->freq = SC18IS602_CLOCK;
break;
}
- master->bus_num = client->adapter->nr;
+ master->bus_num = np ? -1 : client->adapter->nr;
master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->setup = sc18is602_setup;
