blob: 2292f69da4f42388b66d8cf539c076822f7e6571 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* comedi/drivers/cb_pcimdas.c
* Comedi driver for Computer Boards PCIM-DAS1602/16 and PCIe-DAS1602/16
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
*/
/*
* Driver: cb_pcimdas
* Description: Measurement Computing PCI Migration series boards
* Devices: [ComputerBoards] PCIM-DAS1602/16 (cb_pcimdas), PCIe-DAS1602/16
* Author: Richard Bytheway
* Updated: Mon, 13 Oct 2014 11:57:39 +0000
* Status: experimental
*
* Written to support the PCIM-DAS1602/16 and PCIe-DAS1602/16.
*
* Configuration Options:
* none
*
* Manual configuration of PCI(e) cards is not supported; they are configured
* automatically.
*
* Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
* Only supports DIO, AO and simple AI in it's present form.
* No interrupts, multi channel or FIFO AI,
* although the card looks like it could support this.
*
* https://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf
* https://www.mccdaq.com/PDFs/Manuals/pcie-das1602-16.pdf
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include "../comedi_pci.h"
#include "comedi_8254.h"
#include "plx9052.h"
#include "8255.h"
/*
* PCI Bar 1 Register map
* see plx9052.h for register and bit defines
*/
/*
* PCI Bar 2 Register map (devpriv->daqio)
*/
#define PCIMDAS_AI_REG 0x00
#define PCIMDAS_AI_SOFTTRIG_REG 0x00
#define PCIMDAS_AO_REG(x) (0x02 + ((x) * 2))
/*
* PCI Bar 3 Register map (devpriv->BADR3)
*/
#define PCIMDAS_MUX_REG 0x00
#define PCIMDAS_MUX(_lo, _hi) ((_lo) | ((_hi) << 4))
#define PCIMDAS_DI_DO_REG 0x01
#define PCIMDAS_STATUS_REG 0x02
#define PCIMDAS_STATUS_EOC BIT(7)
#define PCIMDAS_STATUS_UB BIT(6)
#define PCIMDAS_STATUS_MUX BIT(5)
#define PCIMDAS_STATUS_CLK BIT(4)
#define PCIMDAS_STATUS_TO_CURR_MUX(x) ((x) & 0xf)
#define PCIMDAS_CONV_STATUS_REG 0x03
#define PCIMDAS_CONV_STATUS_EOC BIT(7)
#define PCIMDAS_CONV_STATUS_EOB BIT(6)
#define PCIMDAS_CONV_STATUS_EOA BIT(5)
#define PCIMDAS_CONV_STATUS_FNE BIT(4)
#define PCIMDAS_CONV_STATUS_FHF BIT(3)
#define PCIMDAS_CONV_STATUS_OVERRUN BIT(2)
#define PCIMDAS_IRQ_REG 0x04
#define PCIMDAS_IRQ_INTE BIT(7)
#define PCIMDAS_IRQ_INT BIT(6)
#define PCIMDAS_IRQ_OVERRUN BIT(4)
#define PCIMDAS_IRQ_EOA BIT(3)
#define PCIMDAS_IRQ_EOA_INT_SEL BIT(2)
#define PCIMDAS_IRQ_INTSEL(x) ((x) << 0)
#define PCIMDAS_IRQ_INTSEL_EOC PCIMDAS_IRQ_INTSEL(0)
#define PCIMDAS_IRQ_INTSEL_FNE PCIMDAS_IRQ_INTSEL(1)
#define PCIMDAS_IRQ_INTSEL_EOB PCIMDAS_IRQ_INTSEL(2)
#define PCIMDAS_IRQ_INTSEL_FHF_EOA PCIMDAS_IRQ_INTSEL(3)
#define PCIMDAS_PACER_REG 0x05
#define PCIMDAS_PACER_GATE_STATUS BIT(6)
#define PCIMDAS_PACER_GATE_POL BIT(5)
#define PCIMDAS_PACER_GATE_LATCH BIT(4)
#define PCIMDAS_PACER_GATE_EN BIT(3)
#define PCIMDAS_PACER_EXT_PACER_POL BIT(2)
#define PCIMDAS_PACER_SRC(x) ((x) << 0)
#define PCIMDAS_PACER_SRC_POLLED PCIMDAS_PACER_SRC(0)
#define PCIMDAS_PACER_SRC_EXT PCIMDAS_PACER_SRC(2)
#define PCIMDAS_PACER_SRC_INT PCIMDAS_PACER_SRC(3)
#define PCIMDAS_PACER_SRC_MASK (3 << 0)
#define PCIMDAS_BURST_REG 0x06
#define PCIMDAS_BURST_BME BIT(1)
#define PCIMDAS_BURST_CONV_EN BIT(0)
#define PCIMDAS_GAIN_REG 0x07
#define PCIMDAS_8254_BASE 0x08
#define PCIMDAS_USER_CNTR_REG 0x0c
#define PCIMDAS_USER_CNTR_CTR1_CLK_SEL BIT(0)
#define PCIMDAS_RESIDUE_MSB_REG 0x0d
#define PCIMDAS_RESIDUE_LSB_REG 0x0e
/*
* PCI Bar 4 Register map (dev->iobase)
*/
#define PCIMDAS_8255_BASE 0x00
static const struct comedi_lrange cb_pcimdas_ai_bip_range = {
4, {
BIP_RANGE(10),
BIP_RANGE(5),
BIP_RANGE(2.5),
BIP_RANGE(1.25)
}
};
static const struct comedi_lrange cb_pcimdas_ai_uni_range = {
4, {
UNI_RANGE(10),
UNI_RANGE(5),
UNI_RANGE(2.5),
UNI_RANGE(1.25)
}
};
/*
* The Analog Output range is not programmable. The DAC ranges are
* jumper-settable on the board. The settings are not software-readable.
*/
static const struct comedi_lrange cb_pcimdas_ao_range = {
6, {
BIP_RANGE(10),
BIP_RANGE(5),
UNI_RANGE(10),
UNI_RANGE(5),
RANGE_ext(-1, 1),
RANGE_ext(0, 1)
}
};
/*
* this structure is for data unique to this hardware driver. If
* several hardware drivers keep similar information in this structure,
* feel free to suggest moving the variable to the struct comedi_device
* struct.
*/
struct cb_pcimdas_private {
/* base addresses */
unsigned long daqio;
unsigned long BADR3;
};
static int cb_pcimdas_ai_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int status;
status = inb(devpriv->BADR3 + PCIMDAS_STATUS_REG);
if ((status & PCIMDAS_STATUS_EOC) == 0)
return 0;
return -EBUSY;
}
static int cb_pcimdas_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int range = CR_RANGE(insn->chanspec);
int n;
unsigned int d;
int ret;
/* only support sw initiated reads from a single channel */
/* configure for sw initiated read */
d = inb(devpriv->BADR3 + PCIMDAS_PACER_REG);
if ((d & PCIMDAS_PACER_SRC_MASK) != PCIMDAS_PACER_SRC_POLLED) {
d &= ~PCIMDAS_PACER_SRC_MASK;
d |= PCIMDAS_PACER_SRC_POLLED;
outb(d, devpriv->BADR3 + PCIMDAS_PACER_REG);
}
/* set bursting off, conversions on */
outb(PCIMDAS_BURST_CONV_EN, devpriv->BADR3 + PCIMDAS_BURST_REG);
/* set range */
outb(range, devpriv->BADR3 + PCIMDAS_GAIN_REG);
/* set mux for single channel scan */
outb(PCIMDAS_MUX(chan, chan), devpriv->BADR3 + PCIMDAS_MUX_REG);
/* convert n samples */
for (n = 0; n < insn->n; n++) {
/* trigger conversion */
outw(0, devpriv->daqio + PCIMDAS_AI_SOFTTRIG_REG);
/* wait for conversion to end */
ret = comedi_timeout(dev, s, insn, cb_pcimdas_ai_eoc, 0);
if (ret)
return ret;
/* read data */
data[n] = inw(devpriv->daqio + PCIMDAS_AI_REG);
}
/* return the number of samples read/written */
return n;
}
static int cb_pcimdas_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int val = s->readback[chan];
int i;
for (i = 0; i < insn->n; i++) {
val = data[i];
outw(val, devpriv->daqio + PCIMDAS_AO_REG(chan));
}
s->readback[chan] = val;
return insn->n;
}
static int cb_pcimdas_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int val;
val = inb(devpriv->BADR3 + PCIMDAS_DI_DO_REG);
data[1] = val & 0x0f;
return insn->n;
}
static int cb_pcimdas_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct cb_pcimdas_private *devpriv = dev->private;
if (comedi_dio_update_state(s, data))
outb(s->state, devpriv->BADR3 + PCIMDAS_DI_DO_REG);
data[1] = s->state;
return insn->n;
}
static int cb_pcimdas_counter_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int ctrl;
switch (data[0]) {
case INSN_CONFIG_SET_CLOCK_SRC:
switch (data[1]) {
case 0: /* internal 100 kHz clock */
ctrl = PCIMDAS_USER_CNTR_CTR1_CLK_SEL;
break;
case 1: /* external clk on pin 21 */
ctrl = 0;
break;
default:
return -EINVAL;
}
outb(ctrl, devpriv->BADR3 + PCIMDAS_USER_CNTR_REG);
break;
case INSN_CONFIG_GET_CLOCK_SRC:
ctrl = inb(devpriv->BADR3 + PCIMDAS_USER_CNTR_REG);
if (ctrl & PCIMDAS_USER_CNTR_CTR1_CLK_SEL) {
data[1] = 0;
data[2] = I8254_OSC_BASE_100KHZ;
} else {
data[1] = 1;
data[2] = 0;
}
break;
default:
return -EINVAL;
}
return insn->n;
}
static unsigned int cb_pcimdas_pacer_clk(struct comedi_device *dev)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int status;
/* The Pacer Clock jumper selects a 10 MHz or 1 MHz clock */
status = inb(devpriv->BADR3 + PCIMDAS_STATUS_REG);
if (status & PCIMDAS_STATUS_CLK)
return I8254_OSC_BASE_10MHZ;
return I8254_OSC_BASE_1MHZ;
}
static bool cb_pcimdas_is_ai_se(struct comedi_device *dev)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int status;
/*
* The number of Analog Input channels is set with the
* Analog Input Mode Switch on the board. The board can
* have 16 single-ended or 8 differential channels.
*/
status = inb(devpriv->BADR3 + PCIMDAS_STATUS_REG);
return status & PCIMDAS_STATUS_MUX;
}
static bool cb_pcimdas_is_ai_uni(struct comedi_device *dev)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int status;
/*
* The Analog Input range polarity is set with the
* Analog Input Polarity Switch on the board. The
* inputs can be set to Unipolar or Bipolar ranges.
*/
status = inb(devpriv->BADR3 + PCIMDAS_STATUS_REG);
return status & PCIMDAS_STATUS_UB;
}
static int cb_pcimdas_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct cb_pcimdas_private *devpriv;
struct comedi_subdevice *s;
int ret;
devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
if (!devpriv)
return -ENOMEM;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
devpriv->daqio = pci_resource_start(pcidev, 2);
devpriv->BADR3 = pci_resource_start(pcidev, 3);
dev->iobase = pci_resource_start(pcidev, 4);
dev->pacer = comedi_8254_init(devpriv->BADR3 + PCIMDAS_8254_BASE,
cb_pcimdas_pacer_clk(dev),
I8254_IO8, 0);
if (!dev->pacer)
return -ENOMEM;
ret = comedi_alloc_subdevices(dev, 6);
if (ret)
return ret;
/* Analog Input subdevice */
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE;
if (cb_pcimdas_is_ai_se(dev)) {
s->subdev_flags |= SDF_GROUND;
s->n_chan = 16;
} else {
s->subdev_flags |= SDF_DIFF;
s->n_chan = 8;
}
s->maxdata = 0xffff;
s->range_table = cb_pcimdas_is_ai_uni(dev) ? &cb_pcimdas_ai_uni_range
: &cb_pcimdas_ai_bip_range;
s->insn_read = cb_pcimdas_ai_insn_read;
/* Analog Output subdevice */
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 2;
s->maxdata = 0xfff;
s->range_table = &cb_pcimdas_ao_range;
s->insn_write = cb_pcimdas_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* Digital I/O subdevice */
s = &dev->subdevices[2];
ret = subdev_8255_init(dev, s, NULL, PCIMDAS_8255_BASE);
if (ret)
return ret;
/* Digital Input subdevice (main connector) */
s = &dev->subdevices[3];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = cb_pcimdas_di_insn_bits;
/* Digital Output subdevice (main connector) */
s = &dev->subdevices[4];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = cb_pcimdas_do_insn_bits;
/* Counter subdevice (8254) */
s = &dev->subdevices[5];
comedi_8254_subdevice_init(s, dev->pacer);
dev->pacer->insn_config = cb_pcimdas_counter_insn_config;
/* counters 1 and 2 are used internally for the pacer */
comedi_8254_set_busy(dev->pacer, 1, true);
comedi_8254_set_busy(dev->pacer, 2, true);
return 0;
}
static struct comedi_driver cb_pcimdas_driver = {
.driver_name = "cb_pcimdas",
.module = THIS_MODULE,
.auto_attach = cb_pcimdas_auto_attach,
.detach = comedi_pci_detach,
};
static int cb_pcimdas_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &cb_pcimdas_driver,
id->driver_data);
}
static const struct pci_device_id cb_pcimdas_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0056) }, /* PCIM-DAS1602/16 */
{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0115) }, /* PCIe-DAS1602/16 */
{ 0 }
};
MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
static struct pci_driver cb_pcimdas_pci_driver = {
.name = "cb_pcimdas",
.id_table = cb_pcimdas_pci_table,
.probe = cb_pcimdas_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(cb_pcimdas_driver, cb_pcimdas_pci_driver);
MODULE_AUTHOR("Comedi https://www.comedi.org");
MODULE_DESCRIPTION("Comedi driver for PCIM-DAS1602/16 and PCIe-DAS1602/16");
MODULE_LICENSE("GPL");