blob: 3d67d1fa36906aa063d82f9947160a43657568de [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*******************************************************************************
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
ST Ethernet IPs are built around a Synopsys IP Core.
Copyright(C) 2007-2011 STMicroelectronics Ltd
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Documentation available at:
http://www.stlinux.com
Support available at:
https://bugzilla.stlinux.com/
*******************************************************************************/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/skbuff.h>
#include <linux/ethtool.h>
#include <linux/if_ether.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/prefetch.h>
#include <linux/pinctrl/consumer.h>
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#endif /* CONFIG_DEBUG_FS */
#include <linux/net_tstamp.h>
#include <linux/phylink.h>
#include <linux/udp.h>
#include <linux/bpf_trace.h>
#include <net/pkt_cls.h>
#include <net/xdp_sock_drv.h>
#include "stmmac_ptp.h"
#include "stmmac.h"
#include "stmmac_xdp.h"
#include <linux/reset.h>
#include <linux/of_mdio.h>
#include "dwmac1000.h"
#include "dwxgmac2.h"
#include "hwif.h"
#define STMMAC_ALIGN(x) ALIGN(ALIGN(x, SMP_CACHE_BYTES), 16)
#define TSO_MAX_BUFF_SIZE (SZ_16K - 1)
/* Module parameters */
#define TX_TIMEO 5000
static int watchdog = TX_TIMEO;
module_param(watchdog, int, 0644);
MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds (default 5s)");
static int debug = -1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
static int phyaddr = -1;
module_param(phyaddr, int, 0444);
MODULE_PARM_DESC(phyaddr, "Physical device address");
#define STMMAC_TX_THRESH(x) ((x)->dma_tx_size / 4)
#define STMMAC_RX_THRESH(x) ((x)->dma_rx_size / 4)
/* Limit to make sure XDP TX and slow path can coexist */
#define STMMAC_XSK_TX_BUDGET_MAX 256
#define STMMAC_TX_XSK_AVAIL 16
#define STMMAC_RX_FILL_BATCH 16
#define STMMAC_XDP_PASS 0
#define STMMAC_XDP_CONSUMED BIT(0)
#define STMMAC_XDP_TX BIT(1)
#define STMMAC_XDP_REDIRECT BIT(2)
static int flow_ctrl = FLOW_AUTO;
module_param(flow_ctrl, int, 0644);
MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
static int pause = PAUSE_TIME;
module_param(pause, int, 0644);
MODULE_PARM_DESC(pause, "Flow Control Pause Time");
#define TC_DEFAULT 64
static int tc = TC_DEFAULT;
module_param(tc, int, 0644);
MODULE_PARM_DESC(tc, "DMA threshold control value");
#define DEFAULT_BUFSIZE 1536
static int buf_sz = DEFAULT_BUFSIZE;
module_param(buf_sz, int, 0644);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
#define STMMAC_RX_COPYBREAK 256
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_IFUP |
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
#define STMMAC_DEFAULT_LPI_TIMER 1000
static int eee_timer = STMMAC_DEFAULT_LPI_TIMER;
module_param(eee_timer, int, 0644);
MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
#define STMMAC_LPI_T(x) (jiffies + usecs_to_jiffies(x))
/* By default the driver will use the ring mode to manage tx and rx descriptors,
* but allow user to force to use the chain instead of the ring
*/
static unsigned int chain_mode;
module_param(chain_mode, int, 0444);
MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
/* For MSI interrupts handling */
static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue);
static void stmmac_flush_tx_descriptors(struct stmmac_priv *priv, int queue);
#ifdef CONFIG_DEBUG_FS
static const struct net_device_ops stmmac_netdev_ops;
static void stmmac_init_fs(struct net_device *dev);
static void stmmac_exit_fs(struct net_device *dev);
#endif
#define STMMAC_COAL_TIMER(x) (ns_to_ktime((x) * NSEC_PER_USEC))
int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled)
{
int ret = 0;
if (enabled) {
ret = clk_prepare_enable(priv->plat->stmmac_clk);
if (ret)
return ret;
ret = clk_prepare_enable(priv->plat->pclk);
if (ret) {
clk_disable_unprepare(priv->plat->stmmac_clk);
return ret;
}
if (priv->plat->clks_config) {
ret = priv->plat->clks_config(priv->plat->bsp_priv, enabled);
if (ret) {
clk_disable_unprepare(priv->plat->stmmac_clk);
clk_disable_unprepare(priv->plat->pclk);
return ret;
}
}
} else {
clk_disable_unprepare(priv->plat->stmmac_clk);
clk_disable_unprepare(priv->plat->pclk);
if (priv->plat->clks_config)
priv->plat->clks_config(priv->plat->bsp_priv, enabled);
}
return ret;
}
EXPORT_SYMBOL_GPL(stmmac_bus_clks_config);
/**
* stmmac_verify_args - verify the driver parameters.
* Description: it checks the driver parameters and set a default in case of
* errors.
*/
static void stmmac_verify_args(void)
{
if (unlikely(watchdog < 0))
watchdog = TX_TIMEO;
if (unlikely((buf_sz < DEFAULT_BUFSIZE) || (buf_sz > BUF_SIZE_16KiB)))
buf_sz = DEFAULT_BUFSIZE;
if (unlikely(flow_ctrl > 1))
flow_ctrl = FLOW_AUTO;
else if (likely(flow_ctrl < 0))
flow_ctrl = FLOW_OFF;
if (unlikely((pause < 0) || (pause > 0xffff)))
pause = PAUSE_TIME;
if (eee_timer < 0)
eee_timer = STMMAC_DEFAULT_LPI_TIMER;
}
static void __stmmac_disable_all_queues(struct stmmac_priv *priv)
{
u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
u32 queue;
for (queue = 0; queue < maxq; queue++) {
struct stmmac_channel *ch = &priv->channel[queue];
if (stmmac_xdp_is_enabled(priv) &&
test_bit(queue, priv->af_xdp_zc_qps)) {
napi_disable(&ch->rxtx_napi);
continue;
}
if (queue < rx_queues_cnt)
napi_disable(&ch->rx_napi);
if (queue < tx_queues_cnt)
napi_disable(&ch->tx_napi);
}
}
/**
* stmmac_disable_all_queues - Disable all queues
* @priv: driver private structure
*/
static void stmmac_disable_all_queues(struct stmmac_priv *priv)
{
u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
struct stmmac_rx_queue *rx_q;
u32 queue;
/* synchronize_rcu() needed for pending XDP buffers to drain */
for (queue = 0; queue < rx_queues_cnt; queue++) {
rx_q = &priv->rx_queue[queue];
if (rx_q->xsk_pool) {
synchronize_rcu();
break;
}
}
__stmmac_disable_all_queues(priv);
}
/**
* stmmac_enable_all_queues - Enable all queues
* @priv: driver private structure
*/
static void stmmac_enable_all_queues(struct stmmac_priv *priv)
{
u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
u32 queue;
for (queue = 0; queue < maxq; queue++) {
struct stmmac_channel *ch = &priv->channel[queue];
if (stmmac_xdp_is_enabled(priv) &&
test_bit(queue, priv->af_xdp_zc_qps)) {
napi_enable(&ch->rxtx_napi);
continue;
}
if (queue < rx_queues_cnt)
napi_enable(&ch->rx_napi);
if (queue < tx_queues_cnt)
napi_enable(&ch->tx_napi);
}
}
static void stmmac_service_event_schedule(struct stmmac_priv *priv)
{
if (!test_bit(STMMAC_DOWN, &priv->state) &&
!test_and_set_bit(STMMAC_SERVICE_SCHED, &priv->state))
queue_work(priv->wq, &priv->service_task);
}
static void stmmac_global_err(struct stmmac_priv *priv)
{
netif_carrier_off(priv->dev);
set_bit(STMMAC_RESET_REQUESTED, &priv->state);
stmmac_service_event_schedule(priv);
}
/**
* stmmac_clk_csr_set - dynamically set the MDC clock
* @priv: driver private structure
* Description: this is to dynamically set the MDC clock according to the csr
* clock input.
* Note:
* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
* changed at run-time and it is fixed (as reported in the driver
* documentation). Viceversa the driver will try to set the MDC
* clock dynamically according to the actual clock input.
*/
static void stmmac_clk_csr_set(struct stmmac_priv *priv)
{
u32 clk_rate;
clk_rate = clk_get_rate(priv->plat->stmmac_clk);
/* Platform provided default clk_csr would be assumed valid
* for all other cases except for the below mentioned ones.
* For values higher than the IEEE 802.3 specified frequency
* we can not estimate the proper divider as it is not known
* the frequency of clk_csr_i. So we do not change the default
* divider.
*/
if (!(priv->clk_csr & MAC_CSR_H_FRQ_MASK)) {
if (clk_rate < CSR_F_35M)
priv->clk_csr = STMMAC_CSR_20_35M;
else if ((clk_rate >= CSR_F_35M) && (clk_rate < CSR_F_60M))
priv->clk_csr = STMMAC_CSR_35_60M;
else if ((clk_rate >= CSR_F_60M) && (clk_rate < CSR_F_100M))
priv->clk_csr = STMMAC_CSR_60_100M;
else if ((clk_rate >= CSR_F_100M) && (clk_rate < CSR_F_150M))
priv->clk_csr = STMMAC_CSR_100_150M;
else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
priv->clk_csr = STMMAC_CSR_150_250M;
else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M))
priv->clk_csr = STMMAC_CSR_250_300M;
}
if (priv->plat->has_sun8i) {
if (clk_rate > 160000000)
priv->clk_csr = 0x03;
else if (clk_rate > 80000000)
priv->clk_csr = 0x02;
else if (clk_rate > 40000000)
priv->clk_csr = 0x01;
else
priv->clk_csr = 0;
}
if (priv->plat->has_xgmac) {
if (clk_rate > 400000000)
priv->clk_csr = 0x5;
else if (clk_rate > 350000000)
priv->clk_csr = 0x4;
else if (clk_rate > 300000000)
priv->clk_csr = 0x3;
else if (clk_rate > 250000000)
priv->clk_csr = 0x2;
else if (clk_rate > 150000000)
priv->clk_csr = 0x1;
else
priv->clk_csr = 0x0;
}
}
static void print_pkt(unsigned char *buf, int len)
{
pr_debug("len = %d byte, buf addr: 0x%p\n", len, buf);
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
}
static inline u32 stmmac_tx_avail(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
u32 avail;
if (tx_q->dirty_tx > tx_q->cur_tx)
avail = tx_q->dirty_tx - tx_q->cur_tx - 1;
else
avail = priv->dma_tx_size - tx_q->cur_tx + tx_q->dirty_tx - 1;
return avail;
}
/**
* stmmac_rx_dirty - Get RX queue dirty
* @priv: driver private structure
* @queue: RX queue index
*/
static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
u32 dirty;
if (rx_q->dirty_rx <= rx_q->cur_rx)
dirty = rx_q->cur_rx - rx_q->dirty_rx;
else
dirty = priv->dma_rx_size - rx_q->dirty_rx + rx_q->cur_rx;
return dirty;
}
static void stmmac_lpi_entry_timer_config(struct stmmac_priv *priv, bool en)
{
int tx_lpi_timer;
/* Clear/set the SW EEE timer flag based on LPI ET enablement */
priv->eee_sw_timer_en = en ? 0 : 1;
tx_lpi_timer = en ? priv->tx_lpi_timer : 0;
stmmac_set_eee_lpi_timer(priv, priv->hw, tx_lpi_timer);
}
/**
* stmmac_enable_eee_mode - check and enter in LPI mode
* @priv: driver private structure
* Description: this function is to verify and enter in LPI mode in case of
* EEE.
*/
static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
{
u32 tx_cnt = priv->plat->tx_queues_to_use;
u32 queue;
/* check if all TX queues have the work finished */
for (queue = 0; queue < tx_cnt; queue++) {
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
if (tx_q->dirty_tx != tx_q->cur_tx)
return; /* still unfinished work */
}
/* Check and enter in LPI mode */
if (!priv->tx_path_in_lpi_mode)
stmmac_set_eee_mode(priv, priv->hw,
priv->plat->en_tx_lpi_clockgating);
}
/**
* stmmac_disable_eee_mode - disable and exit from LPI mode
* @priv: driver private structure
* Description: this function is to exit and disable EEE in case of
* LPI state is true. This is called by the xmit.
*/
void stmmac_disable_eee_mode(struct stmmac_priv *priv)
{
if (!priv->eee_sw_timer_en) {
stmmac_lpi_entry_timer_config(priv, 0);
return;
}
stmmac_reset_eee_mode(priv, priv->hw);
del_timer_sync(&priv->eee_ctrl_timer);
priv->tx_path_in_lpi_mode = false;
}
/**
* stmmac_eee_ctrl_timer - EEE TX SW timer.
* @t: timer_list struct containing private info
* Description:
* if there is no data transfer and if we are not in LPI state,
* then MAC Transmitter can be moved to LPI state.
*/
static void stmmac_eee_ctrl_timer(struct timer_list *t)
{
struct stmmac_priv *priv = from_timer(priv, t, eee_ctrl_timer);
stmmac_enable_eee_mode(priv);
mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
}
/**
* stmmac_eee_init - init EEE
* @priv: driver private structure
* Description:
* if the GMAC supports the EEE (from the HW cap reg) and the phy device
* can also manage EEE, this function enable the LPI state and start related
* timer.
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
int eee_tw_timer = priv->eee_tw_timer;
/* Using PCS we cannot dial with the phy registers at this stage
* so we do not support extra feature like EEE.
*/
if (priv->hw->pcs == STMMAC_PCS_TBI ||
priv->hw->pcs == STMMAC_PCS_RTBI)
return false;
/* Check if MAC core supports the EEE feature. */
if (!priv->dma_cap.eee)
return false;
mutex_lock(&priv->lock);
/* Check if it needs to be deactivated */
if (!priv->eee_active) {
if (priv->eee_enabled) {
netdev_dbg(priv->dev, "disable EEE\n");
stmmac_lpi_entry_timer_config(priv, 0);
del_timer_sync(&priv->eee_ctrl_timer);
stmmac_set_eee_timer(priv, priv->hw, 0, eee_tw_timer);
if (priv->hw->xpcs)
xpcs_config_eee(priv->hw->xpcs,
priv->plat->mult_fact_100ns,
false);
}
mutex_unlock(&priv->lock);
return false;
}
if (priv->eee_active && !priv->eee_enabled) {
timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
eee_tw_timer);
if (priv->hw->xpcs)
xpcs_config_eee(priv->hw->xpcs,
priv->plat->mult_fact_100ns,
true);
}
if (priv->plat->has_gmac4 && priv->tx_lpi_timer <= STMMAC_ET_MAX) {
del_timer_sync(&priv->eee_ctrl_timer);
priv->tx_path_in_lpi_mode = false;
stmmac_lpi_entry_timer_config(priv, 1);
} else {
stmmac_lpi_entry_timer_config(priv, 0);
mod_timer(&priv->eee_ctrl_timer,
STMMAC_LPI_T(priv->tx_lpi_timer));
}
mutex_unlock(&priv->lock);
netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
return true;
}
/* stmmac_get_tx_hwtstamp - get HW TX timestamps
* @priv: driver private structure
* @p : descriptor pointer
* @skb : the socket buffer
* Description :
* This function will read timestamp from the descriptor & pass it to stack.
* and also perform some sanity checks.
*/
static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv,
struct dma_desc *p, struct sk_buff *skb)
{
struct skb_shared_hwtstamps shhwtstamp;
bool found = false;
s64 adjust = 0;
u64 ns = 0;
if (!priv->hwts_tx_en)
return;
/* exit if skb doesn't support hw tstamp */
if (likely(!skb || !(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)))
return;
/* check tx tstamp status */
if (stmmac_get_tx_timestamp_status(priv, p)) {
stmmac_get_timestamp(priv, p, priv->adv_ts, &ns);
found = true;
} else if (!stmmac_get_mac_tx_timestamp(priv, priv->hw, &ns)) {
found = true;
}
if (found) {
/* Correct the clk domain crossing(CDC) error */
if (priv->plat->has_gmac4 && priv->plat->clk_ptp_rate) {
adjust += -(2 * (NSEC_PER_SEC /
priv->plat->clk_ptp_rate));
ns += adjust;
}
memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
shhwtstamp.hwtstamp = ns_to_ktime(ns);
netdev_dbg(priv->dev, "get valid TX hw timestamp %llu\n", ns);
/* pass tstamp to stack */
skb_tstamp_tx(skb, &shhwtstamp);
}
}
/* stmmac_get_rx_hwtstamp - get HW RX timestamps
* @priv: driver private structure
* @p : descriptor pointer
* @np : next descriptor pointer
* @skb : the socket buffer
* Description :
* This function will read received packet's timestamp from the descriptor
* and pass it to stack. It also perform some sanity checks.
*/
static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
struct dma_desc *np, struct sk_buff *skb)
{
struct skb_shared_hwtstamps *shhwtstamp = NULL;
struct dma_desc *desc = p;
u64 adjust = 0;
u64 ns = 0;
if (!priv->hwts_rx_en)
return;
/* For GMAC4, the valid timestamp is from CTX next desc. */
if (priv->plat->has_gmac4 || priv->plat->has_xgmac)
desc = np;
/* Check if timestamp is available */
if (stmmac_get_rx_timestamp_status(priv, p, np, priv->adv_ts)) {
stmmac_get_timestamp(priv, desc, priv->adv_ts, &ns);
/* Correct the clk domain crossing(CDC) error */
if (priv->plat->has_gmac4 && priv->plat->clk_ptp_rate) {
adjust += 2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate);
ns -= adjust;
}
netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns);
shhwtstamp = skb_hwtstamps(skb);
memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
shhwtstamp->hwtstamp = ns_to_ktime(ns);
} else {
netdev_dbg(priv->dev, "cannot get RX hw timestamp\n");
}
}
/**
* stmmac_hwtstamp_set - control hardware timestamping.
* @dev: device pointer.
* @ifr: An IOCTL specific structure, that can contain a pointer to
* a proprietary structure used to pass information to the driver.
* Description:
* This function configures the MAC to enable/disable both outgoing(TX)
* and incoming(RX) packets time stamping based on user input.
* Return Value:
* 0 on success and an appropriate -ve integer on failure.
*/
static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct hwtstamp_config config;
struct timespec64 now;
u64 temp = 0;
u32 ptp_v2 = 0;
u32 tstamp_all = 0;
u32 ptp_over_ipv4_udp = 0;
u32 ptp_over_ipv6_udp = 0;
u32 ptp_over_ethernet = 0;
u32 snap_type_sel = 0;
u32 ts_master_en = 0;
u32 ts_event_en = 0;
u32 sec_inc = 0;
u32 value = 0;
bool xmac;
xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
if (!(priv->dma_cap.time_stamp || priv->adv_ts)) {
netdev_alert(priv->dev, "No support for HW time stamping\n");
priv->hwts_tx_en = 0;
priv->hwts_rx_en = 0;
return -EOPNOTSUPP;
}
if (copy_from_user(&config, ifr->ifr_data,
sizeof(config)))
return -EFAULT;
netdev_dbg(priv->dev, "%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
__func__, config.flags, config.tx_type, config.rx_filter);
/* reserved for future extensions */
if (config.flags)
return -EINVAL;
if (config.tx_type != HWTSTAMP_TX_OFF &&
config.tx_type != HWTSTAMP_TX_ON)
return -ERANGE;
if (priv->adv_ts) {
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
/* time stamp no incoming packet at all */
config.rx_filter = HWTSTAMP_FILTER_NONE;
break;
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
/* PTP v1, UDP, any kind of event packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
/* 'xmac' hardware can support Sync, Pdelay_Req and
* Pdelay_resp by setting bit14 and bits17/16 to 01
* This leaves Delay_Req timestamps out.
* Enable all events *and* general purpose message
* timestamping
*/
snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
break;
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
/* PTP v1, UDP, Sync packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_SYNC;
/* take time stamp for SYNC messages only */
ts_event_en = PTP_TCR_TSEVNTENA;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
break;
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
/* PTP v1, UDP, Delay_req packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ;
/* take time stamp for Delay_Req messages only */
ts_master_en = PTP_TCR_TSMSTRENA;
ts_event_en = PTP_TCR_TSEVNTENA;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
break;
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
/* PTP v2, UDP, any kind of event packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for all event messages */
snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
break;
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
/* PTP v2, UDP, Sync packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_SYNC;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for SYNC messages only */
ts_event_en = PTP_TCR_TSEVNTENA;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
break;
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
/* PTP v2, UDP, Delay_req packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for Delay_Req messages only */
ts_master_en = PTP_TCR_TSMSTRENA;
ts_event_en = PTP_TCR_TSEVNTENA;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
break;
case HWTSTAMP_FILTER_PTP_V2_EVENT:
/* PTP v2/802.AS1 any layer, any kind of event packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
ptp_v2 = PTP_TCR_TSVER2ENA;
snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
if (priv->synopsys_id < DWMAC_CORE_4_10)
ts_event_en = PTP_TCR_TSEVNTENA;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
ptp_over_ethernet = PTP_TCR_TSIPENA;
break;
case HWTSTAMP_FILTER_PTP_V2_SYNC:
/* PTP v2/802.AS1, any layer, Sync packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_SYNC;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for SYNC messages only */
ts_event_en = PTP_TCR_TSEVNTENA;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
ptp_over_ethernet = PTP_TCR_TSIPENA;
break;
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
/* PTP v2/802.AS1, any layer, Delay_req packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_DELAY_REQ;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for Delay_Req messages only */
ts_master_en = PTP_TCR_TSMSTRENA;
ts_event_en = PTP_TCR_TSEVNTENA;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
ptp_over_ethernet = PTP_TCR_TSIPENA;
break;
case HWTSTAMP_FILTER_NTP_ALL:
case HWTSTAMP_FILTER_ALL:
/* time stamp any incoming packet */
config.rx_filter = HWTSTAMP_FILTER_ALL;
tstamp_all = PTP_TCR_TSENALL;
break;
default:
return -ERANGE;
}
} else {
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
config.rx_filter = HWTSTAMP_FILTER_NONE;
break;
default:
/* PTP v1, UDP, any kind of event packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
break;
}
}
priv->hwts_rx_en = ((config.rx_filter == HWTSTAMP_FILTER_NONE) ? 0 : 1);
priv->hwts_tx_en = config.tx_type == HWTSTAMP_TX_ON;
if (!priv->hwts_tx_en && !priv->hwts_rx_en)
stmmac_config_hw_tstamping(priv, priv->ptpaddr, 0);
else {
value = (PTP_TCR_TSENA | PTP_TCR_TSCFUPDT | PTP_TCR_TSCTRLSSR |
tstamp_all | ptp_v2 | ptp_over_ethernet |
ptp_over_ipv6_udp | ptp_over_ipv4_udp | ts_event_en |
ts_master_en | snap_type_sel);
stmmac_config_hw_tstamping(priv, priv->ptpaddr, value);
/* program Sub Second Increment reg */
stmmac_config_sub_second_increment(priv,
priv->ptpaddr, priv->plat->clk_ptp_rate,
xmac, &sec_inc);
temp = div_u64(1000000000ULL, sec_inc);
/* Store sub second increment and flags for later use */
priv->sub_second_inc = sec_inc;
priv->systime_flags = value;
/* calculate default added value:
* formula is :
* addend = (2^32)/freq_div_ratio;
* where, freq_div_ratio = 1e9ns/sec_inc
*/
temp = (u64)(temp << 32);
priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
stmmac_config_addend(priv, priv->ptpaddr, priv->default_addend);
/* initialize system time */
ktime_get_real_ts64(&now);
/* lower 32 bits of tv_sec are safe until y2106 */
stmmac_init_systime(priv, priv->ptpaddr,
(u32)now.tv_sec, now.tv_nsec);
}
memcpy(&priv->tstamp_config, &config, sizeof(config));
return copy_to_user(ifr->ifr_data, &config,
sizeof(config)) ? -EFAULT : 0;
}
/**
* stmmac_hwtstamp_get - read hardware timestamping.
* @dev: device pointer.
* @ifr: An IOCTL specific structure, that can contain a pointer to
* a proprietary structure used to pass information to the driver.
* Description:
* This function obtain the current hardware timestamping settings
* as requested.
*/
static int stmmac_hwtstamp_get(struct net_device *dev, struct ifreq *ifr)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct hwtstamp_config *config = &priv->tstamp_config;
if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
return -EOPNOTSUPP;
return copy_to_user(ifr->ifr_data, config,
sizeof(*config)) ? -EFAULT : 0;
}
/**
* stmmac_init_ptp - init PTP
* @priv: driver private structure
* Description: this is to verify if the HW supports the PTPv1 or PTPv2.
* This is done by looking at the HW cap. register.
* This function also registers the ptp driver.
*/
static int stmmac_init_ptp(struct stmmac_priv *priv)
{
bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
return -EOPNOTSUPP;
priv->adv_ts = 0;
/* Check if adv_ts can be enabled for dwmac 4.x / xgmac core */
if (xmac && priv->dma_cap.atime_stamp)
priv->adv_ts = 1;
/* Dwmac 3.x core with extend_desc can support adv_ts */
else if (priv->extend_desc && priv->dma_cap.atime_stamp)
priv->adv_ts = 1;
if (priv->dma_cap.time_stamp)
netdev_info(priv->dev, "IEEE 1588-2002 Timestamp supported\n");
if (priv->adv_ts)
netdev_info(priv->dev,
"IEEE 1588-2008 Advanced Timestamp supported\n");
priv->hwts_tx_en = 0;
priv->hwts_rx_en = 0;
stmmac_ptp_register(priv);
return 0;
}
static void stmmac_release_ptp(struct stmmac_priv *priv)
{
clk_disable_unprepare(priv->plat->clk_ptp_ref);
stmmac_ptp_unregister(priv);
}
/**
* stmmac_mac_flow_ctrl - Configure flow control in all queues
* @priv: driver private structure
* @duplex: duplex passed to the next function
* Description: It is used for configuring the flow control in all queues
*/
static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
{
u32 tx_cnt = priv->plat->tx_queues_to_use;
stmmac_flow_ctrl(priv, priv->hw, duplex, priv->flow_ctrl,
priv->pause, tx_cnt);
}
static void stmmac_validate(struct phylink_config *config,
unsigned long *supported,
struct phylink_link_state *state)
{
struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
__ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, };
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
int tx_cnt = priv->plat->tx_queues_to_use;
int max_speed = priv->plat->max_speed;
phylink_set(mac_supported, 10baseT_Half);
phylink_set(mac_supported, 10baseT_Full);
phylink_set(mac_supported, 100baseT_Half);
phylink_set(mac_supported, 100baseT_Full);
phylink_set(mac_supported, 1000baseT_Half);
phylink_set(mac_supported, 1000baseT_Full);
phylink_set(mac_supported, 1000baseKX_Full);
phylink_set(mac_supported, Autoneg);
phylink_set(mac_supported, Pause);
phylink_set(mac_supported, Asym_Pause);
phylink_set_port_modes(mac_supported);
/* Cut down 1G if asked to */
if ((max_speed > 0) && (max_speed < 1000)) {
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseX_Full);
} else if (priv->plat->has_gmac4) {
if (!max_speed || max_speed >= 2500) {
phylink_set(mac_supported, 2500baseT_Full);
phylink_set(mac_supported, 2500baseX_Full);
}
} else if (priv->plat->has_xgmac) {
if (!max_speed || (max_speed >= 2500)) {
phylink_set(mac_supported, 2500baseT_Full);
phylink_set(mac_supported, 2500baseX_Full);
}
if (!max_speed || (max_speed >= 5000)) {
phylink_set(mac_supported, 5000baseT_Full);
}
if (!max_speed || (max_speed >= 10000)) {
phylink_set(mac_supported, 10000baseSR_Full);
phylink_set(mac_supported, 10000baseLR_Full);
phylink_set(mac_supported, 10000baseER_Full);
phylink_set(mac_supported, 10000baseLRM_Full);
phylink_set(mac_supported, 10000baseT_Full);
phylink_set(mac_supported, 10000baseKX4_Full);
phylink_set(mac_supported, 10000baseKR_Full);
}
if (!max_speed || (max_speed >= 25000)) {
phylink_set(mac_supported, 25000baseCR_Full);
phylink_set(mac_supported, 25000baseKR_Full);
phylink_set(mac_supported, 25000baseSR_Full);
}
if (!max_speed || (max_speed >= 40000)) {
phylink_set(mac_supported, 40000baseKR4_Full);
phylink_set(mac_supported, 40000baseCR4_Full);
phylink_set(mac_supported, 40000baseSR4_Full);
phylink_set(mac_supported, 40000baseLR4_Full);
}
if (!max_speed || (max_speed >= 50000)) {
phylink_set(mac_supported, 50000baseCR2_Full);
phylink_set(mac_supported, 50000baseKR2_Full);
phylink_set(mac_supported, 50000baseSR2_Full);
phylink_set(mac_supported, 50000baseKR_Full);
phylink_set(mac_supported, 50000baseSR_Full);
phylink_set(mac_supported, 50000baseCR_Full);
phylink_set(mac_supported, 50000baseLR_ER_FR_Full);
phylink_set(mac_supported, 50000baseDR_Full);
}
if (!max_speed || (max_speed >= 100000)) {
phylink_set(mac_supported, 100000baseKR4_Full);
phylink_set(mac_supported, 100000baseSR4_Full);
phylink_set(mac_supported, 100000baseCR4_Full);
phylink_set(mac_supported, 100000baseLR4_ER4_Full);
phylink_set(mac_supported, 100000baseKR2_Full);
phylink_set(mac_supported, 100000baseSR2_Full);
phylink_set(mac_supported, 100000baseCR2_Full);
phylink_set(mac_supported, 100000baseLR2_ER2_FR2_Full);
phylink_set(mac_supported, 100000baseDR2_Full);
}
}
/* Half-Duplex can only work with single queue */
if (tx_cnt > 1) {
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 1000baseT_Half);
}
linkmode_and(supported, supported, mac_supported);
linkmode_andnot(supported, supported, mask);
linkmode_and(state->advertising, state->advertising, mac_supported);
linkmode_andnot(state->advertising, state->advertising, mask);
/* If PCS is supported, check which modes it supports. */
if (priv->hw->xpcs)
xpcs_validate(priv->hw->xpcs, supported, state);
}
static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state)
{
/* Nothing to do, xpcs_config() handles everything */
}
static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
{
struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
bool *hs_enable = &fpe_cfg->hs_enable;
if (is_up && *hs_enable) {
stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
} else {
*lo_state = FPE_STATE_OFF;
*lp_state = FPE_STATE_OFF;
}
}
static void stmmac_mac_link_down(struct phylink_config *config,
unsigned int mode, phy_interface_t interface)
{
struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
stmmac_mac_set(priv, priv->ioaddr, false);
priv->eee_active = false;
priv->tx_lpi_enabled = false;
priv->eee_enabled = stmmac_eee_init(priv);
stmmac_set_eee_pls(priv, priv->hw, false);
if (priv->dma_cap.fpesel)
stmmac_fpe_link_state_handle(priv, false);
}
static void stmmac_mac_link_up(struct phylink_config *config,
struct phy_device *phy,
unsigned int mode, phy_interface_t interface,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
u32 ctrl;
ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
ctrl &= ~priv->hw->link.speed_mask;
if (interface == PHY_INTERFACE_MODE_USXGMII) {
switch (speed) {
case SPEED_10000:
ctrl |= priv->hw->link.xgmii.speed10000;
break;
case SPEED_5000:
ctrl |= priv->hw->link.xgmii.speed5000;
break;
case SPEED_2500:
ctrl |= priv->hw->link.xgmii.speed2500;
break;
default:
return;
}
} else if (interface == PHY_INTERFACE_MODE_XLGMII) {
switch (speed) {
case SPEED_100000:
ctrl |= priv->hw->link.xlgmii.speed100000;
break;
case SPEED_50000:
ctrl |= priv->hw->link.xlgmii.speed50000;
break;
case SPEED_40000:
ctrl |= priv->hw->link.xlgmii.speed40000;
break;
case SPEED_25000:
ctrl |= priv->hw->link.xlgmii.speed25000;
break;
case SPEED_10000:
ctrl |= priv->hw->link.xgmii.speed10000;
break;
case SPEED_2500:
ctrl |= priv->hw->link.speed2500;
break;
case SPEED_1000:
ctrl |= priv->hw->link.speed1000;
break;
default:
return;
}
} else {
switch (speed) {
case SPEED_2500:
ctrl |= priv->hw->link.speed2500;
break;
case SPEED_1000:
ctrl |= priv->hw->link.speed1000;
break;
case SPEED_100:
ctrl |= priv->hw->link.speed100;
break;
case SPEED_10:
ctrl |= priv->hw->link.speed10;
break;
default:
return;
}
}
priv->speed = speed;
if (priv->plat->fix_mac_speed)
priv->plat->fix_mac_speed(priv->plat->bsp_priv, speed);
if (!duplex)
ctrl &= ~priv->hw->link.duplex;
else
ctrl |= priv->hw->link.duplex;
/* Flow Control operation */
if (tx_pause && rx_pause)
stmmac_mac_flow_ctrl(priv, duplex);
writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
stmmac_mac_set(priv, priv->ioaddr, true);
if (phy && priv->dma_cap.eee) {
priv->eee_active = phy_init_eee(phy, 1) >= 0;
priv->eee_enabled = stmmac_eee_init(priv);
priv->tx_lpi_enabled = priv->eee_enabled;
stmmac_set_eee_pls(priv, priv->hw, true);
}
if (priv->dma_cap.fpesel)
stmmac_fpe_link_state_handle(priv, true);
}
static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
.validate = stmmac_validate,
.mac_config = stmmac_mac_config,
.mac_link_down = stmmac_mac_link_down,
.mac_link_up = stmmac_mac_link_up,
};
/**
* stmmac_check_pcs_mode - verify if RGMII/SGMII is supported
* @priv: driver private structure
* Description: this is to verify if the HW supports the PCS.
* Physical Coding Sublayer (PCS) interface that can be used when the MAC is
* configured for the TBI, RTBI, or SGMII PHY interface.
*/
static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
{
int interface = priv->plat->interface;
if (priv->dma_cap.pcs) {
if ((interface == PHY_INTERFACE_MODE_RGMII) ||
(interface == PHY_INTERFACE_MODE_RGMII_ID) ||
(interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
(interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
netdev_dbg(priv->dev, "PCS RGMII support enabled\n");
priv->hw->pcs = STMMAC_PCS_RGMII;
} else if (interface == PHY_INTERFACE_MODE_SGMII) {
netdev_dbg(priv->dev, "PCS SGMII support enabled\n");
priv->hw->pcs = STMMAC_PCS_SGMII;
}
}
}
/**
* stmmac_init_phy - PHY initialization
* @dev: net device structure
* Description: it initializes the driver's PHY state, and attaches the PHY
* to the mac driver.
* Return value:
* 0 on success
*/
static int stmmac_init_phy(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct device_node *node;
int ret;
node = priv->plat->phylink_node;
if (node)
ret = phylink_of_phy_connect(priv->phylink, node, 0);
/* Some DT bindings do not set-up the PHY handle. Let's try to
* manually parse it
*/
if (!node || ret) {
int addr = priv->plat->phy_addr;
struct phy_device *phydev;
phydev = mdiobus_get_phy(priv->mii, addr);
if (!phydev) {
netdev_err(priv->dev, "no phy at addr %d\n", addr);
return -ENODEV;
}
ret = phylink_connect_phy(priv->phylink, phydev);
}
if (!priv->plat->pmt) {
struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
phylink_ethtool_get_wol(priv->phylink, &wol);
device_set_wakeup_capable(priv->device, !!wol.supported);
}
return ret;
}
static int stmmac_phy_setup(struct stmmac_priv *priv)
{
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
int mode = priv->plat->phy_interface;
struct phylink *phylink;
priv->phylink_config.dev = &priv->dev->dev;
priv->phylink_config.type = PHYLINK_NETDEV;
priv->phylink_config.pcs_poll = true;
if (priv->plat->mdio_bus_data)
priv->phylink_config.ovr_an_inband =
mdio_bus_data->xpcs_an_inband;
if (!fwnode)
fwnode = dev_fwnode(priv->device);
phylink = phylink_create(&priv->phylink_config, fwnode,
mode, &stmmac_phylink_mac_ops);
if (IS_ERR(phylink))
return PTR_ERR(phylink);
if (priv->hw->xpcs)
phylink_set_pcs(phylink, &priv->hw->xpcs->pcs);
priv->phylink = phylink;
return 0;
}
static void stmmac_display_rx_rings(struct stmmac_priv *priv)
{
u32 rx_cnt = priv->plat->rx_queues_to_use;
unsigned int desc_size;
void *head_rx;
u32 queue;
/* Display RX rings */
for (queue = 0; queue < rx_cnt; queue++) {
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
pr_info("\tRX Queue %u rings\n", queue);
if (priv->extend_desc) {
head_rx = (void *)rx_q->dma_erx;
desc_size = sizeof(struct dma_extended_desc);
} else {
head_rx = (void *)rx_q->dma_rx;
desc_size = sizeof(struct dma_desc);
}
/* Display RX ring */
stmmac_display_ring(priv, head_rx, priv->dma_rx_size, true,
rx_q->dma_rx_phy, desc_size);
}
}
static void stmmac_display_tx_rings(struct stmmac_priv *priv)
{
u32 tx_cnt = priv->plat->tx_queues_to_use;
unsigned int desc_size;
void *head_tx;
u32 queue;
/* Display TX rings */
for (queue = 0; queue < tx_cnt; queue++) {
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
pr_info("\tTX Queue %d rings\n", queue);
if (priv->extend_desc) {
head_tx = (void *)tx_q->dma_etx;
desc_size = sizeof(struct dma_extended_desc);
} else if (tx_q->tbs & STMMAC_TBS_AVAIL) {
head_tx = (void *)tx_q->dma_entx;
desc_size = sizeof(struct dma_edesc);
} else {
head_tx = (void *)tx_q->dma_tx;
desc_size = sizeof(struct dma_desc);
}
stmmac_display_ring(priv, head_tx, priv->dma_tx_size, false,
tx_q->dma_tx_phy, desc_size);
}
}
static void stmmac_display_rings(struct stmmac_priv *priv)
{
/* Display RX ring */
stmmac_display_rx_rings(priv);
/* Display TX ring */
stmmac_display_tx_rings(priv);
}
static int stmmac_set_bfsize(int mtu, int bufsize)
{
int ret = bufsize;
if (mtu >= BUF_SIZE_8KiB)
ret = BUF_SIZE_16KiB;
else if (mtu >= BUF_SIZE_4KiB)
ret = BUF_SIZE_8KiB;
else if (mtu >= BUF_SIZE_2KiB)
ret = BUF_SIZE_4KiB;
else if (mtu > DEFAULT_BUFSIZE)
ret = BUF_SIZE_2KiB;
else
ret = DEFAULT_BUFSIZE;
return ret;
}
/**
* stmmac_clear_rx_descriptors - clear RX descriptors
* @priv: driver private structure
* @queue: RX queue index
* Description: this function is called to clear the RX descriptors
* in case of both basic and extended descriptors are used.
*/
static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
int i;
/* Clear the RX descriptors */
for (i = 0; i < priv->dma_rx_size; i++)
if (priv->extend_desc)
stmmac_init_rx_desc(priv, &rx_q->dma_erx[i].basic,
priv->use_riwt, priv->mode,
(i == priv->dma_rx_size - 1),
priv->dma_buf_sz);
else
stmmac_init_rx_desc(priv, &rx_q->dma_rx[i],
priv->use_riwt, priv->mode,
(i == priv->dma_rx_size - 1),
priv->dma_buf_sz);
}
/**
* stmmac_clear_tx_descriptors - clear tx descriptors
* @priv: driver private structure
* @queue: TX queue index.
* Description: this function is called to clear the TX descriptors
* in case of both basic and extended descriptors are used.
*/
static void stmmac_clear_tx_descriptors(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
int i;
/* Clear the TX descriptors */
for (i = 0; i < priv->dma_tx_size; i++) {
int last = (i == (priv->dma_tx_size - 1));
struct dma_desc *p;
if (priv->extend_desc)
p = &tx_q->dma_etx[i].basic;
else if (tx_q->tbs & STMMAC_TBS_AVAIL)
p = &tx_q->dma_entx[i].basic;
else
p = &tx_q->dma_tx[i];
stmmac_init_tx_desc(priv, p, priv->mode, last);
}
}
/**
* stmmac_clear_descriptors - clear descriptors
* @priv: driver private structure
* Description: this function is called to clear the TX and RX descriptors
* in case of both basic and extended descriptors are used.
*/
static void stmmac_clear_descriptors(struct stmmac_priv *priv)
{
u32 rx_queue_cnt = priv->plat->rx_queues_to_use;
u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
u32 queue;
/* Clear the RX descriptors */
for (queue = 0; queue < rx_queue_cnt; queue++)
stmmac_clear_rx_descriptors(priv, queue);
/* Clear the TX descriptors */
for (queue = 0; queue < tx_queue_cnt; queue++)
stmmac_clear_tx_descriptors(priv, queue);
}
/**
* stmmac_init_rx_buffers - init the RX descriptor buffer.
* @priv: driver private structure
* @p: descriptor pointer
* @i: descriptor index
* @flags: gfp flag
* @queue: RX queue index
* Description: this function is called to allocate a receive buffer, perform
* the DMA mapping and init the descriptor.
*/
static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
int i, gfp_t flags, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
if (!buf->page) {
buf->page = page_pool_dev_alloc_pages(rx_q->page_pool);
if (!buf->page)
return -ENOMEM;
buf->page_offset = stmmac_rx_offset(priv);
}
if (priv->sph && !buf->sec_page) {
buf->sec_page = page_pool_dev_alloc_pages(rx_q->page_pool);
if (!buf->sec_page)
return -ENOMEM;
buf->sec_addr = page_pool_get_dma_addr(buf->sec_page);
stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, true);
} else {
buf->sec_page = NULL;
stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, false);
}
buf->addr = page_pool_get_dma_addr(buf->page) + buf->page_offset;
stmmac_set_desc_addr(priv, p, buf->addr);
if (priv->dma_buf_sz == BUF_SIZE_16KiB)
stmmac_init_desc3(priv, p);
return 0;
}
/**
* stmmac_free_rx_buffer - free RX dma buffers
* @priv: private structure
* @queue: RX queue index
* @i: buffer index.
*/
static void stmmac_free_rx_buffer(struct stmmac_priv *priv, u32 queue, int i)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
if (buf->page)
page_pool_put_full_page(rx_q->page_pool, buf->page, false);
buf->page = NULL;
if (buf->sec_page)
page_pool_put_full_page(rx_q->page_pool, buf->sec_page, false);
buf->sec_page = NULL;
}
/**
* stmmac_free_tx_buffer - free RX dma buffers
* @priv: private structure
* @queue: RX queue index
* @i: buffer index.
*/
static void stmmac_free_tx_buffer(struct stmmac_priv *priv, u32 queue, int i)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
if (tx_q->tx_skbuff_dma[i].buf &&
tx_q->tx_skbuff_dma[i].buf_type != STMMAC_TXBUF_T_XDP_TX) {
if (tx_q->tx_skbuff_dma[i].map_as_page)
dma_unmap_page(priv->device,
tx_q->tx_skbuff_dma[i].buf,
tx_q->tx_skbuff_dma[i].len,
DMA_TO_DEVICE);
else
dma_unmap_single(priv->device,
tx_q->tx_skbuff_dma[i].buf,
tx_q->tx_skbuff_dma[i].len,
DMA_TO_DEVICE);
}
if (tx_q->xdpf[i] &&
(tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XDP_TX ||
tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XDP_NDO)) {
xdp_return_frame(tx_q->xdpf[i]);
tx_q->xdpf[i] = NULL;
}
if (tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XSK_TX)
tx_q->xsk_frames_done++;
if (tx_q->tx_skbuff[i] &&
tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_SKB) {
dev_kfree_skb_any(tx_q->tx_skbuff[i]);
tx_q->tx_skbuff[i] = NULL;
}
tx_q->tx_skbuff_dma[i].buf = 0;
tx_q->tx_skbuff_dma[i].map_as_page = false;
}
/**
* dma_free_rx_skbufs - free RX dma buffers
* @priv: private structure
* @queue: RX queue index
*/
static void dma_free_rx_skbufs(struct stmmac_priv *priv, u32 queue)
{
int i;
for (i = 0; i < priv->dma_rx_size; i++)
stmmac_free_rx_buffer(priv, queue, i);
}
static int stmmac_alloc_rx_buffers(struct stmmac_priv *priv, u32 queue,
gfp_t flags)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
int i;
for (i = 0; i < priv->dma_rx_size; i++) {
struct dma_desc *p;
int ret;
if (priv->extend_desc)
p = &((rx_q->dma_erx + i)->basic);
else
p = rx_q->dma_rx + i;
ret = stmmac_init_rx_buffers(priv, p, i, flags,
queue);
if (ret)
return ret;
rx_q->buf_alloc_num++;
}
return 0;
}
/**
* dma_free_rx_xskbufs - free RX dma buffers from XSK pool
* @priv: private structure
* @queue: RX queue index
*/
static void dma_free_rx_xskbufs(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
int i;
for (i = 0; i < priv->dma_rx_size; i++) {
struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
if (!buf->xdp)
continue;
xsk_buff_free(buf->xdp);
buf->xdp = NULL;
}
}
static int stmmac_alloc_rx_buffers_zc(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
int i;
for (i = 0; i < priv->dma_rx_size; i++) {
struct stmmac_rx_buffer *buf;
dma_addr_t dma_addr;
struct dma_desc *p;
if (priv->extend_desc)
p = (struct dma_desc *)(rx_q->dma_erx + i);
else
p = rx_q->dma_rx + i;
buf = &rx_q->buf_pool[i];
buf->xdp = xsk_buff_alloc(rx_q->xsk_pool);
if (!buf->xdp)
return -ENOMEM;
dma_addr = xsk_buff_xdp_get_dma(buf->xdp);
stmmac_set_desc_addr(priv, p, dma_addr);
rx_q->buf_alloc_num++;
}
return 0;
}
static struct xsk_buff_pool *stmmac_get_xsk_pool(struct stmmac_priv *priv, u32 queue)
{
if (!stmmac_xdp_is_enabled(priv) || !test_bit(queue, priv->af_xdp_zc_qps))
return NULL;
return xsk_get_pool_from_qid(priv->dev, queue);
}
/**
* __init_dma_rx_desc_rings - init the RX descriptor ring (per queue)
* @priv: driver private structure
* @queue: RX queue index
* @flags: gfp flag.
* Description: this function initializes the DMA RX descriptors
* and allocates the socket buffers. It supports the chained and ring
* modes.
*/
static int __init_dma_rx_desc_rings(struct stmmac_priv *priv, u32 queue, gfp_t flags)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
int ret;
netif_dbg(priv, probe, priv->dev,
"(%s) dma_rx_phy=0x%08x\n", __func__,
(u32)rx_q->dma_rx_phy);
stmmac_clear_rx_descriptors(priv, queue);
xdp_rxq_info_unreg_mem_model(&rx_q->xdp_rxq);
rx_q->xsk_pool = stmmac_get_xsk_pool(priv, queue);
if (rx_q->xsk_pool) {
WARN_ON(xdp_rxq_info_reg_mem_model(&rx_q->xdp_rxq,
MEM_TYPE_XSK_BUFF_POOL,
NULL));
netdev_info(priv->dev,
"Register MEM_TYPE_XSK_BUFF_POOL RxQ-%d\n",
rx_q->queue_index);
xsk_pool_set_rxq_info(rx_q->xsk_pool, &rx_q->xdp_rxq);
} else {
WARN_ON(xdp_rxq_info_reg_mem_model(&rx_q->xdp_rxq,
MEM_TYPE_PAGE_POOL,
rx_q->page_pool));
netdev_info(priv->dev,
"Register MEM_TYPE_PAGE_POOL RxQ-%d\n",
rx_q->queue_index);
}
if (rx_q->xsk_pool) {
/* RX XDP ZC buffer pool may not be populated, e.g.
* xdpsock TX-only.
*/
stmmac_alloc_rx_buffers_zc(priv, queue);
} else {
ret = stmmac_alloc_rx_buffers(priv, queue, flags);
if (ret < 0)
return -ENOMEM;
}
rx_q->cur_rx = 0;
rx_q->dirty_rx = 0;
/* Setup the chained descriptor addresses */
if (priv->mode == STMMAC_CHAIN_MODE) {
if (priv->extend_desc)
stmmac_mode_init(priv, rx_q->dma_erx,
rx_q->dma_rx_phy,
priv->dma_rx_size, 1);
else
stmmac_mode_init(priv, rx_q->dma_rx,
rx_q->dma_rx_phy,
priv->dma_rx_size, 0);
}
return 0;
}
static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags)
{
struct stmmac_priv *priv = netdev_priv(dev);
u32 rx_count = priv->plat->rx_queues_to_use;
u32 queue;
int ret;
/* RX INITIALIZATION */
netif_dbg(priv, probe, priv->dev,
"SKB addresses:\nskb\t\tskb data\tdma data\n");
for (queue = 0; queue < rx_count; queue++) {
ret = __init_dma_rx_desc_rings(priv, queue, flags);
if (ret)
goto err_init_rx_buffers;
}
return 0;
err_init_rx_buffers:
while (queue >= 0) {
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
if (rx_q->xsk_pool)
dma_free_rx_xskbufs(priv, queue);
else
dma_free_rx_skbufs(priv, queue);
rx_q->buf_alloc_num = 0;
rx_q->xsk_pool = NULL;
if (queue == 0)
break;
queue--;
}
return ret;
}
/**
* __init_dma_tx_desc_rings - init the TX descriptor ring (per queue)
* @priv: driver private structure
* @queue : TX queue index
* Description: this function initializes the DMA TX descriptors
* and allocates the socket buffers. It supports the chained and ring
* modes.
*/
static int __init_dma_tx_desc_rings(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
int i;
netif_dbg(priv, probe, priv->dev,
"(%s) dma_tx_phy=0x%08x\n", __func__,
(u32)tx_q->dma_tx_phy);
/* Setup the chained descriptor addresses */
if (priv->mode == STMMAC_CHAIN_MODE) {
if (priv->extend_desc)
stmmac_mode_init(priv, tx_q->dma_etx,
tx_q->dma_tx_phy,
priv->dma_tx_size, 1);
else if (!(tx_q->tbs & STMMAC_TBS_AVAIL))
stmmac_mode_init(priv, tx_q->dma_tx,
tx_q->dma_tx_phy,
priv->dma_tx_size, 0);
}
tx_q->xsk_pool = stmmac_get_xsk_pool(priv, queue);
for (i = 0; i < priv->dma_tx_size; i++) {
struct dma_desc *p;
if (priv->extend_desc)
p = &((tx_q->dma_etx + i)->basic);
else if (tx_q->tbs & STMMAC_TBS_AVAIL)
p = &((tx_q->dma_entx + i)->basic);
else
p = tx_q->dma_tx + i;
stmmac_clear_desc(priv, p);
tx_q->tx_skbuff_dma[i].buf = 0;
tx_q->tx_skbuff_dma[i].map_as_page = false;
tx_q->tx_skbuff_dma[i].len = 0;
tx_q->tx_skbuff_dma[i].last_segment = false;
tx_q->tx_skbuff[i] = NULL;
}
tx_q->dirty_tx = 0;
tx_q->cur_tx = 0;
tx_q->mss = 0;
netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
return 0;
}
static int init_dma_tx_desc_rings(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
u32 tx_queue_cnt;
u32 queue;
tx_queue_cnt = priv->plat->tx_queues_to_use;
for (queue = 0; queue < tx_queue_cnt; queue++)
__init_dma_tx_desc_rings(priv, queue);
return 0;
}
/**
* init_dma_desc_rings - init the RX/TX descriptor rings
* @dev: net device structure
* @flags: gfp flag.
* Description: this function initializes the DMA RX/TX descriptors
* and allocates the socket buffers. It supports the chained and ring
* modes.
*/
static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
{
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
ret = init_dma_rx_desc_rings(dev, flags);
if (ret)
return ret;
ret = init_dma_tx_desc_rings(dev);
stmmac_clear_descriptors(priv);
if (netif_msg_hw(priv))
stmmac_display_rings(priv);
return ret;
}
/**
* dma_free_tx_skbufs - free TX dma buffers
* @priv: private structure
* @queue: TX queue index
*/
static void dma_free_tx_skbufs(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
int i;
tx_q->xsk_frames_done = 0;
for (i = 0; i < priv->dma_tx_size; i++)
stmmac_free_tx_buffer(priv, queue, i);
if (tx_q->xsk_pool && tx_q->xsk_frames_done) {
xsk_tx_completed(tx_q->xsk_pool, tx_q->xsk_frames_done);
tx_q->xsk_frames_done = 0;
tx_q->xsk_pool = NULL;
}
}
/**
* stmmac_free_tx_skbufs - free TX skb buffers
* @priv: private structure
*/
static void stmmac_free_tx_skbufs(struct stmmac_priv *priv)
{
u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
u32 queue;
for (queue = 0; queue < tx_queue_cnt; queue++)
dma_free_tx_skbufs(priv, queue);
}
/**
* __free_dma_rx_desc_resources - free RX dma desc resources (per queue)
* @priv: private structure
* @queue: RX queue index
*/
static void __free_dma_rx_desc_resources(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
/* Release the DMA RX socket buffers */
if (rx_q->xsk_pool)
dma_free_rx_xskbufs(priv, queue);
else
dma_free_rx_skbufs(priv, queue);
rx_q->buf_alloc_num = 0;
rx_q->xsk_pool = NULL;
/* Free DMA regions of consistent memory previously allocated */
if (!priv->extend_desc)
dma_free_coherent(priv->device, priv->dma_rx_size *
sizeof(struct dma_desc),
rx_q->dma_rx, rx_q->dma_rx_phy);
else
dma_free_coherent(priv->device, priv->dma_rx_size *
sizeof(struct dma_extended_desc),
rx_q->dma_erx, rx_q->dma_rx_phy);
if (xdp_rxq_info_is_reg(&rx_q->xdp_rxq))
xdp_rxq_info_unreg(&rx_q->xdp_rxq);
kfree(rx_q->buf_pool);
if (rx_q->page_pool)
page_pool_destroy(rx_q->page_pool);
}
static void free_dma_rx_desc_resources(struct stmmac_priv *priv)
{
u32 rx_count = priv->plat->rx_queues_to_use;
u32 queue;
/* Free RX queue resources */
for (queue = 0; queue < rx_count; queue++)
__free_dma_rx_desc_resources(priv, queue);
}
/**
* __free_dma_tx_desc_resources - free TX dma desc resources (per queue)
* @priv: private structure
* @queue: TX queue index
*/
static void __free_dma_tx_desc_resources(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
size_t size;
void *addr;
/* Release the DMA TX socket buffers */
dma_free_tx_skbufs(priv, queue);
if (priv->extend_desc) {
size = sizeof(struct dma_extended_desc);
addr = tx_q->dma_etx;
} else if (tx_q->tbs & STMMAC_TBS_AVAIL) {
size = sizeof(struct dma_edesc);
addr = tx_q->dma_entx;
} else {
size = sizeof(struct dma_desc);
addr = tx_q->dma_tx;
}
size *= priv->dma_tx_size;
dma_free_coherent(priv->device, size, addr, tx_q->dma_tx_phy);
kfree(tx_q->tx_skbuff_dma);
kfree(tx_q->tx_skbuff);
}
static void free_dma_tx_desc_resources(struct stmmac_priv *priv)
{
u32 tx_count = priv->plat->tx_queues_to_use;
u32 queue;
/* Free TX queue resources */
for (queue = 0; queue < tx_count; queue++)
__free_dma_tx_desc_resources(priv, queue);
}
/**
* __alloc_dma_rx_desc_resources - alloc RX resources (per queue).
* @priv: private structure
* @queue: RX queue index
* Description: according to which descriptor can be used (extend or basic)
* this function allocates the resources for TX and RX paths. In case of
* reception, for example, it pre-allocated the RX socket buffer in order to
* allow zero-copy mechanism.
*/
static int __alloc_dma_rx_desc_resources(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
struct stmmac_channel *ch = &priv->channel[queue];
bool xdp_prog = stmmac_xdp_is_enabled(priv);
struct page_pool_params pp_params = { 0 };
unsigned int num_pages;
unsigned int napi_id;
int ret;
rx_q->queue_index = queue;
rx_q->priv_data = priv;
pp_params.flags = PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV;
pp_params.pool_size = priv->dma_rx_size;
num_pages = DIV_ROUND_UP(priv->dma_buf_sz, PAGE_SIZE);
pp_params.order = ilog2(num_pages);
pp_params.nid = dev_to_node(priv->device);
pp_params.dev = priv->device;
pp_params.dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE;
pp_params.offset = stmmac_rx_offset(priv);
pp_params.max_len = STMMAC_MAX_RX_BUF_SIZE(num_pages);
rx_q->page_pool = page_pool_create(&pp_params);
if (IS_ERR(rx_q->page_pool)) {
ret = PTR_ERR(rx_q->page_pool);
rx_q->page_pool = NULL;
return ret;
}
rx_q->buf_pool = kcalloc(priv->dma_rx_size,
sizeof(*rx_q->buf_pool),
GFP_KERNEL);
if (!rx_q->buf_pool)
return -ENOMEM;
if (priv->extend_desc) {
rx_q->dma_erx = dma_alloc_coherent(priv->device,
priv->dma_rx_size *
sizeof(struct dma_extended_desc),
&rx_q->dma_rx_phy,
GFP_KERNEL);
if (!rx_q->dma_erx)
return -ENOMEM;
} else {
rx_q->dma_rx = dma_alloc_coherent(priv->device,
priv->dma_rx_size *
sizeof(struct dma_desc),
&rx_q->dma_rx_phy,
GFP_KERNEL);
if (!rx_q->dma_rx)
return -ENOMEM;
}
if (stmmac_xdp_is_enabled(priv) &&
test_bit(queue, priv->af_xdp_zc_qps))
napi_id = ch->rxtx_napi.napi_id;
else
napi_id = ch->rx_napi.napi_id;
ret = xdp_rxq_info_reg(&rx_q->xdp_rxq, priv->dev,
rx_q->queue_index,
napi_id);
if (ret) {
netdev_err(priv->dev, "Failed to register xdp rxq info\n");
return -EINVAL;
}
return 0;
}
static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv)
{
u32 rx_count = priv->plat->rx_queues_to_use;
u32 queue;
int ret;
/* RX queues buffers and DMA */
for (queue = 0; queue < rx_count; queue++) {
ret = __alloc_dma_rx_desc_resources(priv, queue);
if (ret)
goto err_dma;
}
return 0;
err_dma:
free_dma_rx_desc_resources(priv);
return ret;
}
/**
* __alloc_dma_tx_desc_resources - alloc TX resources (per queue).
* @priv: private structure
* @queue: TX queue index
* Description: according to which descriptor can be used (extend or basic)
* this function allocates the resources for TX and RX paths. In case of
* reception, for example, it pre-allocated the RX socket buffer in order to
* allow zero-copy mechanism.
*/
static int __alloc_dma_tx_desc_resources(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
size_t size;
void *addr;
tx_q->queue_index = queue;
tx_q->priv_data = priv;
tx_q->tx_skbuff_dma = kcalloc(priv->dma_tx_size,
sizeof(*tx_q->tx_skbuff_dma),
GFP_KERNEL);
if (!tx_q->tx_skbuff_dma)
return -ENOMEM;
tx_q->tx_skbuff = kcalloc(priv->dma_tx_size,
sizeof(struct sk_buff *),
GFP_KERNEL);
if (!tx_q->tx_skbuff)
return -ENOMEM;
if (priv->extend_desc)
size = sizeof(struct dma_extended_desc);
else if (tx_q->tbs & STMMAC_TBS_AVAIL)
size = sizeof(struct dma_edesc);
else
size = sizeof(struct dma_desc);
size *= priv->dma_tx_size;
addr = dma_alloc_coherent(priv->device, size,
&tx_q->dma_tx_phy, GFP_KERNEL);
if (!addr)
return -ENOMEM;
if (priv->extend_desc)
tx_q->dma_etx = addr;
else if (tx_q->tbs & STMMAC_TBS_AVAIL)
tx_q->dma_entx = addr;
else
tx_q->dma_tx = addr;
return 0;
}
static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv)
{
u32 tx_count = priv->plat->tx_queues_to_use;
u32 queue;
int ret;
/* TX queues buffers and DMA */
for (queue = 0; queue < tx_count; queue++) {
ret = __alloc_dma_tx_desc_resources(priv, queue);
if (ret)
goto err_dma;
}
return 0;
err_dma:
free_dma_tx_desc_resources(priv);
return ret;
}
/**
* alloc_dma_desc_resources - alloc TX/RX resources.
* @priv: private structure
* Description: according to which descriptor can be used (extend or basic)
* this function allocates the resources for TX and RX paths. In case of
* reception, for example, it pre-allocated the RX socket buffer in order to
* allow zero-copy mechanism.
*/
static int alloc_dma_desc_resources(struct stmmac_priv *priv)
{
/* RX Allocation */
int ret = alloc_dma_rx_desc_resources(priv);
if (ret)
return ret;
ret = alloc_dma_tx_desc_resources(priv);
return ret;
}
/**
* free_dma_desc_resources - free dma desc resources
* @priv: private structure
*/
static void free_dma_desc_resources(struct stmmac_priv *priv)
{
/* Release the DMA TX socket buffers */
free_dma_tx_desc_resources(priv);
/* Release the DMA RX socket buffers later
* to ensure all pending XDP_TX buffers are returned.
*/
free_dma_rx_desc_resources(priv);
}
/**
* stmmac_mac_enable_rx_queues - Enable MAC rx queues
* @priv: driver private structure
* Description: It is used for enabling the rx queues in the MAC
*/
static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
{
u32 rx_queues_count = priv->plat->rx_queues_to_use;
int queue;
u8 mode;
for (queue = 0; queue < rx_queues_count; queue++) {
mode = priv->plat->rx_queues_cfg[queue].mode_to_use;
stmmac_rx_queue_enable(priv, priv->hw, mode, queue);
}
}
/**
* stmmac_start_rx_dma - start RX DMA channel
* @priv: driver private structure
* @chan: RX channel index
* Description:
* This starts a RX DMA channel
*/
static void stmmac_start_rx_dma(struct stmmac_priv *priv, u32 chan)
{
netdev_dbg(priv->dev, "DMA RX processes started in channel %d\n", chan);
stmmac_start_rx(priv, priv->ioaddr, chan);
}
/**
* stmmac_start_tx_dma - start TX DMA channel
* @priv: driver private structure
* @chan: TX channel index
* Description:
* This starts a TX DMA channel
*/
static void stmmac_start_tx_dma(struct stmmac_priv *priv, u32 chan)
{
netdev_dbg(priv->dev, "DMA TX processes started in channel %d\n", chan);
stmmac_start_tx(priv, priv->ioaddr, chan);
}
/**
* stmmac_stop_rx_dma - stop RX DMA channel
* @priv: driver private structure
* @chan: RX channel index
* Description:
* This stops a RX DMA channel
*/
static void stmmac_stop_rx_dma(struct stmmac_priv *priv, u32 chan)
{
netdev_dbg(priv->dev, "DMA RX processes stopped in channel %d\n", chan);
stmmac_stop_rx(priv, priv->ioaddr, chan);
}
/**
* stmmac_stop_tx_dma - stop TX DMA channel
* @priv: driver private structure
* @chan: TX channel index
* Description:
* This stops a TX DMA channel
*/
static void stmmac_stop_tx_dma(struct stmmac_priv *priv, u32 chan)
{
netdev_dbg(priv->dev, "DMA TX processes stopped in channel %d\n", chan);
stmmac_stop_tx(priv, priv->ioaddr, chan);
}
/**
* stmmac_start_all_dma - start all RX and TX DMA channels
* @priv: driver private structure
* Description:
* This starts all the RX and TX DMA channels
*/
static void stmmac_start_all_dma(struct stmmac_priv *priv)
{
u32 rx_channels_count = priv->plat->rx_queues_to_use;
u32 tx_channels_count = priv->plat->tx_queues_to_use;
u32 chan = 0;
for (chan = 0; chan < rx_channels_count; chan++)
stmmac_start_rx_dma(priv, chan);
for (chan = 0; chan < tx_channels_count; chan++)
stmmac_start_tx_dma(priv, chan);
}
/**
* stmmac_stop_all_dma - stop all RX and TX DMA channels
* @priv: driver private structure
* Description:
* This stops the RX and TX DMA channels
*/
static void stmmac_stop_all_dma(struct stmmac_priv *priv)
{
u32 rx_channels_count = priv->plat->rx_queues_to_use;
u32 tx_channels_count = priv->plat->tx_queues_to_use;
u32 chan = 0;
for (chan = 0; chan < rx_channels_count; chan++)
stmmac_stop_rx_dma(priv, chan);
for (chan = 0; chan < tx_channels_count; chan++)
stmmac_stop_tx_dma(priv, chan);
}
/**
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv: driver private structure
* Description: it is used for configuring the DMA operation mode register in
* order to program the tx/rx DMA thresholds or Store-And-Forward mode.
*/
static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
{
u32 rx_channels_count = priv->plat->rx_queues_to_use;
u32 tx_channels_count = priv->plat->tx_queues_to_use;
int rxfifosz = priv->plat->rx_fifo_size;
int txfifosz = priv->plat->tx_fifo_size;
u32 txmode = 0;
u32 rxmode = 0;
u32 chan = 0;
u8 qmode = 0;
if (rxfifosz == 0)
rxfifosz = priv->dma_cap.rx_fifo_size;
if (txfifosz == 0)
txfifosz = priv->dma_cap.tx_fifo_size;
/* Adjust for real per queue fifo size */
rxfifosz /= rx_channels_count;
txfifosz /= tx_channels_count;
if (priv->plat->force_thresh_dma_mode) {
txmode = tc;
rxmode = tc;
} else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
/*
* In case of GMAC, SF mode can be enabled
* to perform the TX COE in HW. This depends on:
* 1) TX COE if actually supported
* 2) There is no bugged Jumbo frame support
* that needs to not insert csum in the TDES.
*/
txmode = SF_DMA_MODE;
rxmode = SF_DMA_MODE;
priv->xstats.threshold = SF_DMA_MODE;
} else {
txmode = tc;
rxmode = SF_DMA_MODE;
}
/* configure all channels */
for (chan = 0; chan < rx_channels_count; chan++) {
struct stmmac_rx_queue *rx_q = &priv->rx_queue[chan];
u32 buf_size;
qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
rxfifosz, qmode);
if (rx_q->xsk_pool) {
buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
stmmac_set_dma_bfsize(priv, priv->ioaddr,
buf_size,
chan);
} else {
stmmac_set_dma_bfsize(priv, priv->ioaddr,
priv->dma_buf_sz,
chan);
}
}
for (chan = 0; chan < tx_channels_count; chan++) {
qmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan,
txfifosz, qmode);
}
}
static bool stmmac_xdp_xmit_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
{
struct netdev_queue *nq = netdev_get_tx_queue(priv->dev, queue);
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
struct xsk_buff_pool *pool = tx_q->xsk_pool;
unsigned int entry = tx_q->cur_tx;
struct dma_desc *tx_desc = NULL;
struct xdp_desc xdp_desc;
bool work_done = true;
/* Avoids TX time-out as we are sharing with slow path */
nq->trans_start = jiffies;
budget = min(budget, stmmac_tx_avail(priv, queue));
while (budget-- > 0) {
dma_addr_t dma_addr;
bool set_ic;
/* We are sharing with slow path and stop XSK TX desc submission when
* available TX ring is less than threshold.
*/
if (unlikely(stmmac_tx_avail(priv, queue) < STMMAC_TX_XSK_AVAIL) ||
!netif_carrier_ok(priv->dev)) {
work_done = false;
break;
}
if (!xsk_tx_peek_desc(pool, &xdp_desc))
break;
if (likely(priv->extend_desc))
tx_desc = (struct dma_desc *)(tx_q->dma_etx + entry);
else if (tx_q->tbs & STMMAC_TBS_AVAIL)
tx_desc = &tx_q->dma_entx[entry].basic;
else
tx_desc = tx_q->dma_tx + entry;
dma_addr = xsk_buff_raw_get_dma(pool, xdp_desc.addr);
xsk_buff_raw_dma_sync_for_device(pool, dma_addr, xdp_desc.len);
tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_XSK_TX;
/* To return XDP buffer to XSK pool, we simple call
* xsk_tx_completed(), so we don't need to fill up
* 'buf' and 'xdpf'.
*/
tx_q->tx_skbuff_dma[entry].buf = 0;
tx_q->xdpf[entry] = NULL;
tx_q->tx_skbuff_dma[entry].map_as_page = false;
tx_q->tx_skbuff_dma[entry].len = xdp_desc.len;
tx_q->tx_skbuff_dma[entry].last_segment = true;
tx_q->tx_skbuff_dma[entry].is_jumbo = false;
stmmac_set_desc_addr(priv, tx_desc, dma_addr);
tx_q->tx_count_frames++;
if (!priv->tx_coal_frames[queue])
set_ic = false;
else if (tx_q->tx_count_frames % priv->tx_coal_frames[queue] == 0)
set_ic = true;
else
set_ic = false;
if (set_ic) {
tx_q->tx_count_frames = 0;
stmmac_set_tx_ic(priv, tx_desc);
priv->xstats.tx_set_ic_bit++;
}
stmmac_prepare_tx_desc(priv, tx_desc, 1, xdp_desc.len,
true, priv->mode, true, true,
xdp_desc.len);
stmmac_enable_dma_transmission(priv, priv->ioaddr);
tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, priv->dma_tx_size);
entry = tx_q->cur_tx;
}
if (tx_desc) {
stmmac_flush_tx_descriptors(priv, queue);
xsk_tx_release(pool);
}
/* Return true if all of the 3 conditions are met
* a) TX Budget is still available
* b) work_done = true when XSK TX desc peek is empty (no more
* pending XSK TX for transmission)
*/
return !!budget && work_done;
}
/**
* stmmac_tx_clean - to manage the transmission completion
* @priv: driver private structure
* @budget: napi budget limiting this functions packet handling
* @queue: TX queue index
* Description: it reclaims the transmit resources after transmission completes.
*/
static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
unsigned int bytes_compl = 0, pkts_compl = 0;
unsigned int entry, xmits = 0, count = 0;
__netif_tx_lock_bh(netdev_get_tx_queue(priv->dev, queue));
priv->xstats.tx_clean++;
tx_q->xsk_frames_done = 0;
entry = tx_q->dirty_tx;
/* Try to clean all TX complete frame in 1 shot */
while ((entry != tx_q->cur_tx) && count < priv->dma_tx_size) {
struct xdp_frame *xdpf;
struct sk_buff *skb;
struct dma_desc *p;
int status;
if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_TX ||
tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_NDO) {
xdpf = tx_q->xdpf[entry];
skb = NULL;
} else if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_SKB) {
xdpf = NULL;
skb = tx_q->tx_skbuff[entry];
} else {
xdpf = NULL;
skb = NULL;
}
if (priv->extend_desc)
p = (struct dma_desc *)(tx_q->dma_etx + entry);
else if (tx_q->tbs & STMMAC_TBS_AVAIL)
p = &tx_q->dma_entx[entry].basic;
else
p = tx_q->dma_tx + entry;
status = stmmac_tx_status(priv, &priv->dev->stats,
&priv->xstats, p, priv->ioaddr);
/* Check if the descriptor is owned by the DMA */
if (unlikely(status & tx_dma_own))
break;
count++;
/* Make sure descriptor fields are read after reading
* the own bit.
*/
dma_rmb();
/* Just consider the last segment and ...*/
if (likely(!(status & tx_not_ls))) {
/* ... verify the status error condition */
if (unlikely(status & tx_err)) {
priv->dev->stats.tx_errors++;
} else {
priv->dev->stats.tx_packets++;
priv->xstats.tx_pkt_n++;
priv->xstats.txq_stats[queue].tx_pkt_n++;
}
if (skb)
stmmac_get_tx_hwtstamp(priv, p, skb);
}
if (likely(tx_q->tx_skbuff_dma[entry].buf &&
tx_q->tx_skbuff_dma[entry].buf_type != STMMAC_TXBUF_T_XDP_TX)) {
if (tx_q->tx_skbuff_dma[entry].map_as_page)
dma_unmap_page(priv->device,
tx_q->tx_skbuff_dma[entry].buf,
tx_q->tx_skbuff_dma[entry].len,
DMA_TO_DEVICE);
else
dma_unmap_single(priv->device,
tx_q->tx_skbuff_dma[entry].buf,
tx_q->tx_skbuff_dma[entry].len,
DMA_TO_DEVICE);
tx_q->tx_skbuff_dma[entry].buf = 0;
tx_q->tx_skbuff_dma[entry].len = 0;
tx_q->tx_skbuff_dma[entry].map_as_page = false;
}
stmmac_clean_desc3(priv, tx_q, p);
tx_q->tx_skbuff_dma[entry].last_segment = false;
tx_q->tx_skbuff_dma[entry].is_jumbo = false;
if (xdpf &&
tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_TX) {
xdp_return_frame_rx_napi(xdpf);
tx_q->xdpf[entry] = NULL;
}
if (xdpf &&
tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_NDO) {
xdp_return_frame(xdpf);
tx_q->xdpf[entry] = NULL;
}
if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XSK_TX)
tx_q->xsk_frames_done++;
if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_SKB) {
if (likely(skb)) {
pkts_compl++;
bytes_compl += skb->len;
dev_consume_skb_any(skb);
tx_q->tx_skbuff[entry] = NULL;
}
}
stmmac_release_tx_desc(priv, p, priv->mode);
entry = STMMAC_GET_ENTRY(entry, priv->dma_tx_size);
}
tx_q->dirty_tx = entry;
netdev_tx_completed_queue(netdev_get_tx_queue(priv->dev, queue),
pkts_compl, bytes_compl);
if (unlikely(netif_tx_queue_stopped(netdev_get_tx_queue(priv->dev,
queue))) &&
stmmac_tx_avail(priv, queue) > STMMAC_TX_THRESH(priv)) {
netif_dbg(priv, tx_done, priv->dev,
"%s: restart transmit\n", __func__);
netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, queue));
}
if (tx_q->xsk_pool) {
bool work_done;
if (tx_q->xsk_frames_done)
xsk_tx_completed(tx_q->xsk_pool, tx_q->xsk_frames_done);
if (xsk_uses_need_wakeup(tx_q->xsk_pool))
xsk_set_tx_need_wakeup(tx_q->xsk_pool);
/* For XSK TX, we try to send as many as possible.
* If XSK work done (XSK TX desc empty and budget still
* available), return "budget - 1" to reenable TX IRQ.
* Else, return "budget" to make NAPI continue polling.
*/
work_done = stmmac_xdp_xmit_zc(priv, queue,
STMMAC_XSK_TX_BUDGET_MAX);
if (work_done)
xmits = budget - 1;
else
xmits = budget;
}
if (priv->eee_enabled && !priv->tx_path_in_lpi_mode &&
priv->eee_sw_timer_en) {
stmmac_enable_eee_mode(priv);
mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
}
/* We still have pending packets, let's call for a new scheduling */
if (tx_q->dirty_tx != tx_q->cur_tx)
hrtimer_start(&tx_q->txtimer,
STMMAC_COAL_TIMER(priv->tx_coal_timer[queue]),
HRTIMER_MODE_REL);
__netif_tx_unlock_bh(netdev_get_tx_queue(priv->dev, queue));
/* Combine decisions from TX clean and XSK TX */
return max(count, xmits);
}
/**
* stmmac_tx_err - to manage the tx error
* @priv: driver private structure
* @chan: channel index
* Description: it cleans the descriptors and restarts the transmission
* in case of transmission errors.
*/
static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, chan));
stmmac_stop_tx_dma(priv, chan);
dma_free_tx_skbufs(priv, chan);
stmmac_clear_tx_descriptors(priv, chan);
tx_q->dirty_tx = 0;
tx_q->cur_tx = 0;
tx_q->mss = 0;
netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan));
stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
tx_q->dma_tx_phy, chan);
stmmac_start_tx_dma(priv, chan);
priv->dev->stats.tx_errors++;
netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, chan));
}
/**
* stmmac_set_dma_operation_mode - Set DMA operation mode by channel
* @priv: driver private structure
* @txmode: TX operating mode
* @rxmode: RX operating mode
* @chan: channel index
* Description: it is used for configuring of the DMA operation mode in
* runtime in order to program the tx/rx DMA thresholds or Store-And-Forward
* mode.
*/
static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
u32 rxmode, u32 chan)
{
u8 rxqmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
u8 txqmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
u32 rx_channels_count = priv->plat->rx_queues_to_use;
u32 tx_channels_count = priv->plat->tx_queues_to_use;
int rxfifosz = priv->plat->rx_fifo_size;
int txfifosz = priv->plat->tx_fifo_size;
if (rxfifosz == 0)
rxfifosz = priv->dma_cap.rx_fifo_size;
if (txfifosz == 0)
txfifosz = priv->dma_cap.tx_fifo_size;
/* Adjust for real per queue fifo size */
rxfifosz /= rx_channels_count;
txfifosz /= tx_channels_count;
stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, rxqmode);
stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan, txfifosz, txqmode);
}
static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv)
{
int ret;
ret = stmmac_safety_feat_irq_status(priv, priv->dev,
priv->ioaddr, priv->dma_cap.asp, &priv->sstats);
if (ret && (ret != -EINVAL)) {
stmmac_global_err(priv);
return true;
}
return false;
}
static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan, u32 dir)
{
int status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
&priv->xstats, chan, dir);
struct stmmac_rx_queue *rx_q = &priv->rx_queue[chan];
struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
struct stmmac_channel *ch = &priv->channel[chan];
struct napi_struct *rx_napi;
struct napi_struct *tx_napi;
unsigned long flags;
rx_napi = rx_q->xsk_pool ? &ch->rxtx_napi : &ch->rx_napi;
tx_napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
if (napi_schedule_prep(rx_napi)) {
spin_lock_irqsave(&ch->lock, flags);
stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 0);
spin_unlock_irqrestore(&ch->lock, flags);
__napi_schedule(rx_napi);
}
}
if ((status & handle_tx) && (chan < priv->plat->tx_queues_to_use)) {
if (napi_schedule_prep(tx_napi)) {
spin_lock_irqsave(&ch->lock, flags);
stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 0, 1);
spin_unlock_irqrestore(&ch->lock, flags);
__napi_schedule(tx_napi);
}
}
return status;
}
/**
* stmmac_dma_interrupt - DMA ISR
* @priv: driver private structure
* Description: this is the DMA ISR. It is called by the main ISR.
* It calls the dwmac dma routine and schedule poll method in case of some
* work can be done.
*/
static void stmmac_dma_interrupt(struct stmmac_priv *priv)
{