blob: bbb0ad7590ec12ba42f7af436d307a282b0614c7 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Qualcomm ICE (Inline Crypto Engine) support.
*
* Copyright (c) 2014-2019, The Linux Foundation. All rights reserved.
* Copyright 2019 Google LLC
*/
#include <linux/platform_device.h>
#include <linux/qcom_scm.h>
#include "ufshcd-crypto.h"
#include "ufs-qcom.h"
#define AES_256_XTS_KEY_SIZE 64
/* QCOM ICE registers */
#define QCOM_ICE_REG_CONTROL 0x0000
#define QCOM_ICE_REG_RESET 0x0004
#define QCOM_ICE_REG_VERSION 0x0008
#define QCOM_ICE_REG_FUSE_SETTING 0x0010
#define QCOM_ICE_REG_PARAMETERS_1 0x0014
#define QCOM_ICE_REG_PARAMETERS_2 0x0018
#define QCOM_ICE_REG_PARAMETERS_3 0x001C
#define QCOM_ICE_REG_PARAMETERS_4 0x0020
#define QCOM_ICE_REG_PARAMETERS_5 0x0024
/* QCOM ICE v3.X only */
#define QCOM_ICE_GENERAL_ERR_STTS 0x0040
#define QCOM_ICE_INVALID_CCFG_ERR_STTS 0x0030
#define QCOM_ICE_GENERAL_ERR_MASK 0x0044
/* QCOM ICE v2.X only */
#define QCOM_ICE_REG_NON_SEC_IRQ_STTS 0x0040
#define QCOM_ICE_REG_NON_SEC_IRQ_MASK 0x0044
#define QCOM_ICE_REG_NON_SEC_IRQ_CLR 0x0048
#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME1 0x0050
#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME2 0x0054
#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME1 0x0058
#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME2 0x005C
#define QCOM_ICE_REG_STREAM1_BIST_ERROR_VEC 0x0060
#define QCOM_ICE_REG_STREAM2_BIST_ERROR_VEC 0x0064
#define QCOM_ICE_REG_STREAM1_BIST_FINISH_VEC 0x0068
#define QCOM_ICE_REG_STREAM2_BIST_FINISH_VEC 0x006C
#define QCOM_ICE_REG_BIST_STATUS 0x0070
#define QCOM_ICE_REG_BYPASS_STATUS 0x0074
#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000
#define QCOM_ICE_REG_ENDIAN_SWAP 0x1004
#define QCOM_ICE_REG_TEST_BUS_CONTROL 0x1010
#define QCOM_ICE_REG_TEST_BUS_REG 0x1014
/* BIST ("built-in self-test"?) status flags */
#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000
#define QCOM_ICE_FUSE_SETTING_MASK 0x1
#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2
#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4
#define qcom_ice_writel(host, val, reg) \
writel((val), (host)->ice_mmio + (reg))
#define qcom_ice_readl(host, reg) \
readl((host)->ice_mmio + (reg))
static bool qcom_ice_supported(struct ufs_qcom_host *host)
{
struct device *dev = host->hba->dev;
u32 regval = qcom_ice_readl(host, QCOM_ICE_REG_VERSION);
int major = regval >> 24;
int minor = (regval >> 16) & 0xFF;
int step = regval & 0xFFFF;
/* For now this driver only supports ICE version 3. */
if (major != 3) {
dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
major, minor, step);
return false;
}
dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
major, minor, step);
/* If fuses are blown, ICE might not work in the standard way. */
regval = qcom_ice_readl(host, QCOM_ICE_REG_FUSE_SETTING);
if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
return false;
}
return true;
}
int ufs_qcom_ice_init(struct ufs_qcom_host *host)
{
struct ufs_hba *hba = host->hba;
struct device *dev = hba->dev;
struct platform_device *pdev = to_platform_device(dev);
struct resource *res;
int err;
if (!(ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES) &
MASK_CRYPTO_SUPPORT))
return 0;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ice");
if (!res) {
dev_warn(dev, "ICE registers not found\n");
goto disable;
}
if (!qcom_scm_ice_available()) {
dev_warn(dev, "ICE SCM interface not found\n");
goto disable;
}
host->ice_mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(host->ice_mmio)) {
err = PTR_ERR(host->ice_mmio);
dev_err(dev, "Failed to map ICE registers; err=%d\n", err);
return err;
}
if (!qcom_ice_supported(host))
goto disable;
return 0;
disable:
dev_warn(dev, "Disabling inline encryption support\n");
hba->caps &= ~UFSHCD_CAP_CRYPTO;
return 0;
}
static void qcom_ice_low_power_mode_enable(struct ufs_qcom_host *host)
{
u32 regval;
regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
/*
* Enable low power mode sequence
* [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
*/
regval |= 0x7000;
qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
}
static void qcom_ice_optimization_enable(struct ufs_qcom_host *host)
{
u32 regval;
/* ICE Optimizations Enable Sequence */
regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
regval |= 0xD807100;
/* ICE HPG requires delay before writing */
udelay(5);
qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
udelay(5);
}
int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
{
if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
return 0;
qcom_ice_low_power_mode_enable(host);
qcom_ice_optimization_enable(host);
return ufs_qcom_ice_resume(host);
}
/* Poll until all BIST bits are reset */
static int qcom_ice_wait_bist_status(struct ufs_qcom_host *host)
{
int count;
u32 reg;
for (count = 0; count < 100; count++) {
reg = qcom_ice_readl(host, QCOM_ICE_REG_BIST_STATUS);
if (!(reg & QCOM_ICE_BIST_STATUS_MASK))
break;
udelay(50);
}
if (reg)
return -ETIMEDOUT;
return 0;
}
int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
{
int err;
if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
return 0;
err = qcom_ice_wait_bist_status(host);
if (err) {
dev_err(host->hba->dev, "BIST status error (%d)\n", err);
return err;
}
return 0;
}
/*
* Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires
* vendor-specific SCM calls for this; it doesn't support the standard way.
*/
int ufs_qcom_ice_program_key(struct ufs_hba *hba,
const union ufs_crypto_cfg_entry *cfg, int slot)
{
union ufs_crypto_cap_entry cap;
union {
u8 bytes[AES_256_XTS_KEY_SIZE];
u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
} key;
int i;
int err;
if (!(cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE))
return qcom_scm_ice_invalidate_key(slot);
/* Only AES-256-XTS has been tested so far. */
cap = hba->crypto_cap_array[cfg->crypto_cap_idx];
if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS ||
cap.key_size != UFS_CRYPTO_KEY_SIZE_256) {
dev_err_ratelimited(hba->dev,
"Unhandled crypto capability; algorithm_id=%d, key_size=%d\n",
cap.algorithm_id, cap.key_size);
return -EINVAL;
}
memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE);
/*
* The SCM call byte-swaps the 32-bit words of the key. So we have to
* do the same, in order for the final key be correct.
*/
for (i = 0; i < ARRAY_SIZE(key.words); i++)
__cpu_to_be32s(&key.words[i]);
err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
QCOM_SCM_ICE_CIPHER_AES_256_XTS,
cfg->data_unit_size);
memzero_explicit(&key, sizeof(key));
return err;
}