diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 0783864..febbfd9 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -112,6 +112,7 @@
 	struct urb *irq;
 	struct wacom_wac wacom_wac;
 	struct mutex lock;
+	struct work_struct work;
 	bool open;
 	char phys[32];
 	struct wacom_led {
@@ -122,6 +123,12 @@
 	} led;
 };
 
+static inline void wacom_schedule_work(struct wacom_wac *wacom_wac)
+{
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	schedule_work(&wacom->work);
+}
+
 extern const struct usb_device_id wacom_ids[];
 
 void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index d8cc9ce..2fc7705 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -167,6 +167,19 @@
 		usb_autopm_put_interface(wacom->intf);
 }
 
+/*
+ * Static values for max X/Y and resolution of Pen interface is stored in
+ * features. This mean physical size of active area can be computed.
+ * This is useful to do when Pen and Touch have same active area of tablet.
+ * This means for Touch device, we only need to find max X/Y value and we
+ * have enough information to compute resolution of touch.
+ */
+static void wacom_set_phy_from_res(struct wacom_features *features)
+{
+	features->x_phy = (features->x_max * 100) / features->x_resolution;
+	features->y_phy = (features->y_max * 100) / features->y_resolution;
+}
+
 static int wacom_parse_logical_collection(unsigned char *report,
 					  struct wacom_features *features)
 {
@@ -178,15 +191,7 @@
 		features->pktlen = WACOM_PKGLEN_BBTOUCH3;
 		features->device_type = BTN_TOOL_FINGER;
 
-		/*
-		 * Stylus and Touch have same active area
-		 * so compute physical size based on stylus
-		 * data before its overwritten.
-		 */
-		features->x_phy =
-			(features->x_max * features->x_resolution) / 100;
-		features->y_phy =
-			(features->y_max * features->y_resolution) / 100;
+		wacom_set_phy_from_res(features);
 
 		features->x_max = features->y_max =
 			get_unaligned_le16(&report[10]);
@@ -869,6 +874,72 @@
 	return error;
 }
 
+static void wacom_wireless_work(struct work_struct *work)
+{
+	struct wacom *wacom = container_of(work, struct wacom, work);
+	struct usb_device *usbdev = wacom->usbdev;
+	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+
+	/*
+	 * Regardless if this is a disconnect or a new tablet,
+	 * remove any existing input devices.
+	 */
+
+	/* Stylus interface */
+	wacom = usb_get_intfdata(usbdev->config->interface[1]);
+	if (wacom->wacom_wac.input)
+		input_unregister_device(wacom->wacom_wac.input);
+	wacom->wacom_wac.input = 0;
+
+	/* Touch interface */
+	wacom = usb_get_intfdata(usbdev->config->interface[2]);
+	if (wacom->wacom_wac.input)
+		input_unregister_device(wacom->wacom_wac.input);
+	wacom->wacom_wac.input = 0;
+
+	if (wacom_wac->pid == 0) {
+		printk(KERN_INFO "wacom: wireless tablet disconnected\n");
+	} else {
+		const struct usb_device_id *id = wacom_ids;
+
+		printk(KERN_INFO
+		       "wacom: wireless tablet connected with PID %x\n",
+		       wacom_wac->pid);
+
+		while (id->match_flags) {
+			if (id->idVendor == USB_VENDOR_ID_WACOM &&
+			    id->idProduct == wacom_wac->pid)
+				break;
+			id++;
+		}
+
+		if (!id->match_flags) {
+			printk(KERN_INFO
+			       "wacom: ignorning unknown PID.\n");
+			return;
+		}
+
+		/* Stylus interface */
+		wacom = usb_get_intfdata(usbdev->config->interface[1]);
+		wacom_wac = &wacom->wacom_wac;
+		wacom_wac->features =
+			*((struct wacom_features *)id->driver_info);
+		wacom_wac->features.device_type = BTN_TOOL_PEN;
+		wacom_register_input(wacom);
+
+		/* Touch interface */
+		wacom = usb_get_intfdata(usbdev->config->interface[2]);
+		wacom_wac = &wacom->wacom_wac;
+		wacom_wac->features =
+			*((struct wacom_features *)id->driver_info);
+		wacom_wac->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
+		wacom_wac->features.device_type = BTN_TOOL_FINGER;
+		wacom_set_phy_from_res(&wacom_wac->features);
+		wacom_wac->features.x_max = wacom_wac->features.y_max = 4096;
+		wacom_register_input(wacom);
+	}
+}
+
 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
@@ -907,6 +978,7 @@
 	wacom->usbdev = dev;
 	wacom->intf = intf;
 	mutex_init(&wacom->lock);
+	INIT_WORK(&wacom->work, wacom_wireless_work);
 	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
 	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
 
@@ -977,6 +1049,7 @@
 	usb_set_intfdata(intf, NULL);
 
 	usb_kill_urb(wacom->irq);
+	cancel_work_sync(&wacom->work);
 	if (wacom->wacom_wac.input)
 		input_unregister_device(wacom->wacom_wac.input);
 	wacom_destroy_leds(wacom);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 6264e6a..fce7a09 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1046,9 +1046,27 @@
 
 static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
 {
-	if (len != WACOM_PKGLEN_WIRELESS)
+	unsigned char *data = wacom->data;
+	int connected;
+
+	if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
 		return 0;
 
+	connected = data[1] & 0x01;
+	if (connected) {
+		int pid;
+
+		pid = get_unaligned_be16(&data[6]);
+		if (wacom->pid != pid) {
+			wacom->pid = pid;
+			wacom_schedule_work(wacom);
+		}
+	} else if (wacom->pid != 0) {
+		/* disconnected while previously connected */
+		wacom->pid = 0;
+		wacom_schedule_work(wacom);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 2c04b62..cffaf6b 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -111,6 +111,7 @@
 	struct wacom_features features;
 	struct wacom_shared *shared;
 	struct input_dev *input;
+	int pid;
 };
 
 #endif