# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/nvidia,tegra210-admaif.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Tegra210 ADMAIF Device Tree Bindings

description: |
  ADMAIF is the interface between ADMA and AHUB. Each ADMA channel
  that sends/receives data to/from AHUB must interface through an
  ADMAIF channel. ADMA channel sending data to AHUB pairs with ADMAIF
  Tx channel and ADMA channel receiving data from AHUB pairs with
  ADMAIF Rx channel.

maintainers:
  - Jon Hunter <jonathanh@nvidia.com>
  - Sameer Pujar <spujar@nvidia.com>

allOf:
  - $ref: audio-graph-port.yaml#

properties:
  $nodename:
    pattern: "^admaif@[0-9a-f]*$"

  compatible:
    oneOf:
      - enum:
          - nvidia,tegra210-admaif
          - nvidia,tegra186-admaif
      - items:
          - const: nvidia,tegra194-admaif
          - const: nvidia,tegra186-admaif

  reg:
    maxItems: 1

  dmas: true

  dma-names: true

  ports:
    description: |
      Contains list of ACIF (Audio CIF) port nodes for ADMAIF channels.
      The number of port nodes depends on the number of ADMAIF channels
      that SoC may have. These are interfaced with respective ACIF ports
      in AHUB (Audio Hub). Each port is capable of data transfers in
      both directions.

if:
  properties:
    compatible:
      contains:
        const: nvidia,tegra210-admaif

then:
  properties:
    dmas:
      description:
        DMA channel specifiers, equally divided for Tx and Rx.
      minItems: 1
      maxItems: 20
    dma-names:
      items:
        pattern: "^[rt]x(10|[1-9])$"
      description:
        Should be "rx1", "rx2" ... "rx10" for DMA Rx channel
        Should be "tx1", "tx2" ... "tx10" for DMA Tx channel
      minItems: 1
      maxItems: 20

else:
  properties:
    dmas:
      description:
        DMA channel specifiers, equally divided for Tx and Rx.
      minItems: 1
      maxItems: 40
    dma-names:
      items:
        pattern: "^[rt]x(1[0-9]|[1-9]|20)$"
      description:
        Should be "rx1", "rx2" ... "rx20" for DMA Rx channel
        Should be "tx1", "tx2" ... "tx20" for DMA Tx channel
      minItems: 1
      maxItems: 40

required:
  - compatible
  - reg
  - dmas
  - dma-names

unevaluatedProperties: false

examples:
  - |
    admaif@702d0000 {
        compatible = "nvidia,tegra210-admaif";
        reg = <0x702d0000 0x800>;
        dmas = <&adma 1>,  <&adma 1>,
               <&adma 2>,  <&adma 2>,
               <&adma 3>,  <&adma 3>,
               <&adma 4>,  <&adma 4>,
               <&adma 5>,  <&adma 5>,
               <&adma 6>,  <&adma 6>,
               <&adma 7>,  <&adma 7>,
               <&adma 8>,  <&adma 8>,
               <&adma 9>,  <&adma 9>,
               <&adma 10>, <&adma 10>;
        dma-names = "rx1",  "tx1",
                    "rx2",  "tx2",
                    "rx3",  "tx3",
                    "rx4",  "tx4",
                    "rx5",  "tx5",
                    "rx6",  "tx6",
                    "rx7",  "tx7",
                    "rx8",  "tx8",
                    "rx9",  "tx9",
                    "rx10", "tx10";
    };

...