Merge branches 'acpica', 'bgrt', 'bz-11533', 'cpuidle', 'ec', 'hotplug', 'misc', 'red-hat-bz-727865', 'thermal', 'throttling', 'turbostat' and 'video' into release
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index 4f9ba3c..dd930c8 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -1,3 +1,23 @@
+What: /sys/firmware/acpi/bgrt/
+Date: January 2012
+Contact: Matthew Garrett <mjg@redhat.com>
+Description:
+ The BGRT is an ACPI 5.0 feature that allows the OS
+ to obtain a copy of the firmware boot splash and
+ some associated metadata. This is intended to be used
+ by boot splash applications in order to interact with
+ the firmware boot splash in order to avoid jarring
+ transitions.
+
+ image: The image bitmap. Currently a 32-bit BMP.
+ status: 1 if the image is valid, 0 if firmware invalidated it.
+ type: 0 indicates image is in BMP format.
+ version: The version of the BGRT. Currently 1.
+ xoffset: The number of pixels between the left of the screen
+ and the left edge of the image.
+ yoffset: The number of pixels between the top of the screen
+ and the top edge of the image.
+
What: /sys/firmware/acpi/interrupts/
Date: February 2008
Contact: Len Brown <lenb@kernel.org>
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index ce664f3..bbcc2c3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -642,6 +642,7 @@
kfree(buffer.pointer);
buffer.length = ACPI_ALLOCATE_BUFFER;
buffer.pointer = NULL;
+ lapic = NULL;
if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL))
goto out;
@@ -650,7 +651,7 @@
goto free_tmp_map;
cpumask_copy(tmp_map, cpu_present_mask);
- acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
+ acpi_register_lapic(physid, ACPI_MADT_ENABLED);
/*
* If mp_register_lapic successfully generates a new logical cpu
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 7556913..47768ff 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -384,6 +384,15 @@
load additional kernel modules after boot, this feature may be used
to override that restriction).
+config ACPI_BGRT
+ tristate "Boottime Graphics Resource Table support"
+ default n
+ help
+ This driver adds support for exposing the ACPI Boottime Graphics
+ Resource Table, which allows the operating system to obtain
+ data from the firmware boot splash. It will appear under
+ /sys/firmware/acpi/bgrt/ .
+
source "drivers/acpi/apei/Kconfig"
endif # ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 1567028..47199e2 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -62,6 +62,7 @@
obj-$(CONFIG_ACPI_HED) += hed.o
obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
+obj-$(CONFIG_ACPI_BGRT) += bgrt.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o processor_throttling.o
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 0ca208b..793b8cc 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -68,12 +68,14 @@
acpi-y += \
hwacpi.o \
+ hwesleep.o \
hwgpe.o \
hwpci.o \
hwregs.o \
hwsleep.o \
hwvalid.o \
- hwxface.o
+ hwxface.o \
+ hwxfsleep.o
acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index a44bd42..8a7d51b 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -51,7 +51,6 @@
*
* Note: The order of these include files is important.
*/
-#include "acconfig.h" /* Global configuration constants */
#include "acmacros.h" /* C macros */
#include "aclocal.h" /* Internal data types */
#include "acobject.h" /* ACPI internal object */
diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h
index deaa819..5e8abb0 100644
--- a/drivers/acpi/acpica/acdebug.h
+++ b/drivers/acpi/acpica/acdebug.h
@@ -111,7 +111,7 @@
void acpi_db_set_scope(char *name);
-acpi_status acpi_db_sleep(char *object_arg);
+ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg))
void acpi_db_find_references(char *object_arg);
@@ -119,11 +119,13 @@
void acpi_db_display_resources(char *object_arg);
-void acpi_db_display_gpes(void);
+ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void))
void acpi_db_check_integrity(void);
-void acpi_db_generate_gpe(char *gpe_arg, char *block_arg);
+ACPI_HW_DEPENDENT_RETURN_VOID(void
+ acpi_db_generate_gpe(char *gpe_arg,
+ char *block_arg))
void acpi_db_check_predefined_names(void);
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index c53caa5..d700f63 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -69,11 +69,10 @@
*/
acpi_status acpi_ev_init_global_lock_handler(void);
-acpi_status acpi_ev_acquire_global_lock(u16 timeout);
-
-acpi_status acpi_ev_release_global_lock(void);
-
-acpi_status acpi_ev_remove_global_lock_handler(void);
+ACPI_HW_DEPENDENT_RETURN_OK(acpi_status
+ acpi_ev_acquire_global_lock(u16 timeout))
+ ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_ev_release_global_lock(void))
+ acpi_status acpi_ev_remove_global_lock_handler(void);
/*
* evgpe - Low-level GPE support
@@ -114,7 +113,9 @@
struct acpi_gpe_block_info *gpe_block,
void *context);
-acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block);
+ACPI_HW_DEPENDENT_RETURN_OK(acpi_status
+ acpi_ev_delete_gpe_block(struct acpi_gpe_block_info
+ *gpe_block))
u32
acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
@@ -126,9 +127,10 @@
*/
acpi_status acpi_ev_gpe_initialize(void);
-void acpi_ev_update_gpes(acpi_owner_id table_owner_id);
+ACPI_HW_DEPENDENT_RETURN_VOID(void
+ acpi_ev_update_gpes(acpi_owner_id table_owner_id))
-acpi_status
+ acpi_status
acpi_ev_match_gpe_method(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
@@ -237,6 +239,5 @@
u32 acpi_ev_initialize_sCI(u32 program_sCI);
-void acpi_ev_terminate(void);
-
+ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void))
#endif /* __ACEVENTS_H__ */
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 2853f76..4f7d3f5 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -147,7 +147,7 @@
*/
u8 acpi_gbl_reduced_hardware;
-#endif
+#endif /* DEFINE_ACPI_GLOBALS */
/* Do not disassemble buffers to resource descriptors */
@@ -184,8 +184,12 @@
* found in the RSDT/XSDT.
*/
ACPI_EXTERN struct acpi_table_list acpi_gbl_root_table_list;
+
+#if (!ACPI_REDUCED_HARDWARE)
ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS;
+#endif /* !ACPI_REDUCED_HARDWARE */
+
/* These addresses are calculated from the FADT Event Block addresses */
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status;
@@ -397,10 +401,15 @@
ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head;
ACPI_EXTERN struct acpi_gpe_block_info
*acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
+
+#if (!ACPI_REDUCED_HARDWARE)
+
ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized;
ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler;
ACPI_EXTERN void *acpi_gbl_global_event_handler_context;
+#endif /* !ACPI_REDUCED_HARDWARE */
+
/*****************************************************************************
*
* Debugger globals
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 677793e..5ccb99a 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -81,6 +81,26 @@
acpi_status acpi_hw_clear_acpi_status(void);
/*
+ * hwsleep - sleep/wake support (Legacy sleep registers)
+ */
+acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags);
+
+acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags);
+
+acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags);
+
+/*
+ * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers)
+ */
+void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument);
+
+acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags);
+
+acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags);
+
+acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags);
+
+/*
* hwvalid - Port I/O with validation
*/
acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width);
@@ -128,16 +148,4 @@
acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id,
acpi_handle root_pci_device, acpi_handle pci_region);
-#ifdef ACPI_FUTURE_USAGE
-/*
- * hwtimer - ACPI Timer prototypes
- */
-acpi_status acpi_get_timer_resolution(u32 * resolution);
-
-acpi_status acpi_get_timer(u32 * ticks);
-
-acpi_status
-acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed);
-#endif /* ACPI_FUTURE_USAGE */
-
#endif /* __ACHWARE_H__ */
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 3f24068..e3922ca 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -370,6 +370,7 @@
/* Defines for Flags field above */
#define ACPI_OBJECT_REPAIRED 1
+#define ACPI_OBJECT_WRAPPED 2
/*
* Bitmapped return value types
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index ef338a9..f119f47 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -516,6 +516,12 @@
#endif /* ACPI_DEBUG_OUTPUT */
+#if (!ACPI_REDUCED_HARDWARE)
+#define ACPI_HW_OPTIONAL_FUNCTION(addr) addr
+#else
+#define ACPI_HW_OPTIONAL_FUNCTION(addr) NULL
+#endif
+
/*
* Some code only gets executed when the debugger is built in.
* Note that this is entirely independent of whether the
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 2c9e0f0..9b19d4b 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -283,8 +283,9 @@
union acpi_operand_object **return_object_ptr);
acpi_status
-acpi_ns_repair_package_list(struct acpi_predefined_data *data,
- union acpi_operand_object **obj_desc_ptr);
+acpi_ns_wrap_with_package(struct acpi_predefined_data *data,
+ union acpi_operand_object *original_object,
+ union acpi_operand_object **obj_desc_ptr);
acpi_status
acpi_ns_repair_null_element(struct acpi_predefined_data *data,
diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h
index d5bec30..6712965 100644
--- a/drivers/acpi/acpica/actables.h
+++ b/drivers/acpi/acpica/actables.h
@@ -67,6 +67,11 @@
acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc);
+struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header
+ *table_header,
+ struct acpi_table_desc
+ *table_desc);
+
acpi_status
acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index);
diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c
index 6729ebe..07e4dc4 100644
--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -47,7 +47,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evevent")
-
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static acpi_status acpi_ev_fixed_event_initialize(void);
@@ -291,3 +291,5 @@
return ((acpi_gbl_fixed_event_handlers[event].
handler) (acpi_gbl_fixed_event_handlers[event].context));
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c
index 5e5683c..cfeab38 100644
--- a/drivers/acpi/acpica/evglock.c
+++ b/drivers/acpi/acpica/evglock.c
@@ -48,7 +48,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evglock")
-
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static u32 acpi_ev_global_lock_handler(void *context);
@@ -339,3 +339,5 @@
acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex);
return_ACPI_STATUS(status);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 9e88cb6..8ba0e5f 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -48,7 +48,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpe")
-
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context);
@@ -766,3 +766,5 @@
return_UINT32(ACPI_INTERRUPT_HANDLED);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index be75339..23a3ca8 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -48,7 +48,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpeblk")
-
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static acpi_status
acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
@@ -504,3 +504,5 @@
return_ACPI_STATUS(AE_OK);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
index adf7494..da0add8 100644
--- a/drivers/acpi/acpica/evgpeinit.c
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -48,7 +48,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpeinit")
-
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/*
* Note: History of _PRW support in ACPICA
*
@@ -440,3 +440,5 @@
name, gpe_number));
return_ACPI_STATUS(AE_OK);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c
index 2507393..3c43796 100644
--- a/drivers/acpi/acpica/evgpeutil.c
+++ b/drivers/acpi/acpica/evgpeutil.c
@@ -48,6 +48,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpeutil")
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/*******************************************************************************
*
* FUNCTION: acpi_ev_walk_gpe_list
@@ -374,3 +375,5 @@
return_ACPI_STATUS(AE_OK);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c
index 84966f4..51ef9f5 100644
--- a/drivers/acpi/acpica/evmisc.c
+++ b/drivers/acpi/acpica/evmisc.c
@@ -108,27 +108,30 @@
ACPI_FUNCTION_NAME(ev_queue_notify_request);
/*
- * For value 3 (Ejection Request), some device method may need to be run.
- * For value 2 (Device Wake) if _PRW exists, the _PS0 method may need
- * to be run.
+ * For value 0x03 (Ejection Request), may need to run a device method.
+ * For value 0x02 (Device Wake), if _PRW exists, may need to run
+ * the _PS0 method.
* For value 0x80 (Status Change) on the power button or sleep button,
- * initiate soft-off or sleep operation?
+ * initiate soft-off or sleep operation.
+ *
+ * For all cases, simply dispatch the notify to the handler.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Dispatching Notify on [%4.4s] Node %p Value 0x%2.2X (%s)\n",
- acpi_ut_get_node_name(node), node, notify_value,
- acpi_ut_get_notify_name(notify_value)));
+ "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n",
+ acpi_ut_get_node_name(node),
+ acpi_ut_get_type_name(node->type), notify_value,
+ acpi_ut_get_notify_name(notify_value), node));
/* Get the notify object attached to the NS Node */
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
- /* We have the notify object, Get the right handler */
+ /* We have the notify object, Get the correct handler */
switch (node->type) {
- /* Notify allowed only on these types */
+ /* Notify is allowed only on these types */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_THERMAL:
@@ -152,7 +155,7 @@
}
/*
- * If there is any handler to run, schedule the dispatcher.
+ * If there is a handler to run, schedule the dispatcher.
* Check for:
* 1) Global system notify handler
* 2) Global device notify handler
@@ -270,6 +273,7 @@
acpi_ut_delete_generic_state(notify_info);
}
+#if (!ACPI_REDUCED_HARDWARE)
/******************************************************************************
*
* FUNCTION: acpi_ev_terminate
@@ -338,3 +342,5 @@
}
return_VOID;
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c
index 26065c6..6a57aa2 100644
--- a/drivers/acpi/acpica/evsci.c
+++ b/drivers/acpi/acpica/evsci.c
@@ -48,7 +48,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evsci")
-
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context);
@@ -181,3 +181,5 @@
return_ACPI_STATUS(status);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 61944e8..44bef57 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -51,222 +51,6 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxface")
-/*******************************************************************************
- *
- * FUNCTION: acpi_install_exception_handler
- *
- * PARAMETERS: Handler - Pointer to the handler function for the
- * event
- *
- * RETURN: Status
- *
- * DESCRIPTION: Saves the pointer to the handler function
- *
- ******************************************************************************/
-#ifdef ACPI_FUTURE_USAGE
-acpi_status acpi_install_exception_handler(acpi_exception_handler handler)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_install_exception_handler);
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Don't allow two handlers. */
-
- if (acpi_gbl_exception_handler) {
- status = AE_ALREADY_EXISTS;
- goto cleanup;
- }
-
- /* Install the handler */
-
- acpi_gbl_exception_handler = handler;
-
- cleanup:
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_install_exception_handler)
-#endif /* ACPI_FUTURE_USAGE */
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_install_global_event_handler
- *
- * PARAMETERS: Handler - Pointer to the global event handler function
- * Context - Value passed to the handler on each event
- *
- * RETURN: Status
- *
- * DESCRIPTION: Saves the pointer to the handler function. The global handler
- * is invoked upon each incoming GPE and Fixed Event. It is
- * invoked at interrupt level at the time of the event dispatch.
- * Can be used to update event counters, etc.
- *
- ******************************************************************************/
-acpi_status
-acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_install_global_event_handler);
-
- /* Parameter validation */
-
- if (!handler) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Don't allow two handlers. */
-
- if (acpi_gbl_global_event_handler) {
- status = AE_ALREADY_EXISTS;
- goto cleanup;
- }
-
- acpi_gbl_global_event_handler = handler;
- acpi_gbl_global_event_handler_context = context;
-
- cleanup:
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler)
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_install_fixed_event_handler
- *
- * PARAMETERS: Event - Event type to enable.
- * Handler - Pointer to the handler function for the
- * event
- * Context - Value passed to the handler on each GPE
- *
- * RETURN: Status
- *
- * DESCRIPTION: Saves the pointer to the handler function and then enables the
- * event.
- *
- ******************************************************************************/
-acpi_status
-acpi_install_fixed_event_handler(u32 event,
- acpi_event_handler handler, void *context)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler);
-
- /* Parameter validation */
-
- if (event > ACPI_EVENT_MAX) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Don't allow two handlers. */
-
- if (NULL != acpi_gbl_fixed_event_handlers[event].handler) {
- status = AE_ALREADY_EXISTS;
- goto cleanup;
- }
-
- /* Install the handler before enabling the event */
-
- acpi_gbl_fixed_event_handlers[event].handler = handler;
- acpi_gbl_fixed_event_handlers[event].context = context;
-
- status = acpi_clear_event(event);
- if (ACPI_SUCCESS(status))
- status = acpi_enable_event(event, 0);
- if (ACPI_FAILURE(status)) {
- ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X",
- event));
-
- /* Remove the handler */
-
- acpi_gbl_fixed_event_handlers[event].handler = NULL;
- acpi_gbl_fixed_event_handlers[event].context = NULL;
- } else {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Enabled fixed event %X, Handler=%p\n", event,
- handler));
- }
-
- cleanup:
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler)
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_remove_fixed_event_handler
- *
- * PARAMETERS: Event - Event type to disable.
- * Handler - Address of the handler
- *
- * RETURN: Status
- *
- * DESCRIPTION: Disables the event and unregisters the event handler.
- *
- ******************************************************************************/
-acpi_status
-acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler)
-{
- acpi_status status = AE_OK;
-
- ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler);
-
- /* Parameter validation */
-
- if (event > ACPI_EVENT_MAX) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Disable the event before removing the handler */
-
- status = acpi_disable_event(event, 0);
-
- /* Always Remove the handler */
-
- acpi_gbl_fixed_event_handlers[event].handler = NULL;
- acpi_gbl_fixed_event_handlers[event].context = NULL;
-
- if (ACPI_FAILURE(status)) {
- ACPI_WARNING((AE_INFO,
- "Could not write to fixed event enable register 0x%X",
- event));
- } else {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
- event));
- }
-
- (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler)
/*******************************************************************************
*
@@ -334,6 +118,7 @@
return AE_OK;
}
+
/*******************************************************************************
*
* FUNCTION: acpi_install_notify_handler
@@ -705,6 +490,224 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_install_exception_handler
+ *
+ * PARAMETERS: Handler - Pointer to the handler function for the
+ * event
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Saves the pointer to the handler function
+ *
+ ******************************************************************************/
+#ifdef ACPI_FUTURE_USAGE
+acpi_status acpi_install_exception_handler(acpi_exception_handler handler)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_install_exception_handler);
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Don't allow two handlers. */
+
+ if (acpi_gbl_exception_handler) {
+ status = AE_ALREADY_EXISTS;
+ goto cleanup;
+ }
+
+ /* Install the handler */
+
+ acpi_gbl_exception_handler = handler;
+
+ cleanup:
+ (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_install_exception_handler)
+#endif /* ACPI_FUTURE_USAGE */
+
+#if (!ACPI_REDUCED_HARDWARE)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_install_global_event_handler
+ *
+ * PARAMETERS: Handler - Pointer to the global event handler function
+ * Context - Value passed to the handler on each event
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Saves the pointer to the handler function. The global handler
+ * is invoked upon each incoming GPE and Fixed Event. It is
+ * invoked at interrupt level at the time of the event dispatch.
+ * Can be used to update event counters, etc.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_install_global_event_handler);
+
+ /* Parameter validation */
+
+ if (!handler) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Don't allow two handlers. */
+
+ if (acpi_gbl_global_event_handler) {
+ status = AE_ALREADY_EXISTS;
+ goto cleanup;
+ }
+
+ acpi_gbl_global_event_handler = handler;
+ acpi_gbl_global_event_handler_context = context;
+
+ cleanup:
+ (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_install_fixed_event_handler
+ *
+ * PARAMETERS: Event - Event type to enable.
+ * Handler - Pointer to the handler function for the
+ * event
+ * Context - Value passed to the handler on each GPE
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Saves the pointer to the handler function and then enables the
+ * event.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_install_fixed_event_handler(u32 event,
+ acpi_event_handler handler, void *context)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler);
+
+ /* Parameter validation */
+
+ if (event > ACPI_EVENT_MAX) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Don't allow two handlers. */
+
+ if (NULL != acpi_gbl_fixed_event_handlers[event].handler) {
+ status = AE_ALREADY_EXISTS;
+ goto cleanup;
+ }
+
+ /* Install the handler before enabling the event */
+
+ acpi_gbl_fixed_event_handlers[event].handler = handler;
+ acpi_gbl_fixed_event_handlers[event].context = context;
+
+ status = acpi_clear_event(event);
+ if (ACPI_SUCCESS(status))
+ status = acpi_enable_event(event, 0);
+ if (ACPI_FAILURE(status)) {
+ ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X",
+ event));
+
+ /* Remove the handler */
+
+ acpi_gbl_fixed_event_handlers[event].handler = NULL;
+ acpi_gbl_fixed_event_handlers[event].context = NULL;
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Enabled fixed event %X, Handler=%p\n", event,
+ handler));
+ }
+
+ cleanup:
+ (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_remove_fixed_event_handler
+ *
+ * PARAMETERS: Event - Event type to disable.
+ * Handler - Address of the handler
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Disables the event and unregisters the event handler.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler)
+{
+ acpi_status status = AE_OK;
+
+ ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler);
+
+ /* Parameter validation */
+
+ if (event > ACPI_EVENT_MAX) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Disable the event before removing the handler */
+
+ status = acpi_disable_event(event, 0);
+
+ /* Always Remove the handler */
+
+ acpi_gbl_fixed_event_handlers[event].handler = NULL;
+ acpi_gbl_fixed_event_handlers[event].context = NULL;
+
+ if (ACPI_FAILURE(status)) {
+ ACPI_WARNING((AE_INFO,
+ "Could not write to fixed event enable register 0x%X",
+ event));
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
+ event));
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler)
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_install_gpe_handler
*
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
@@ -984,3 +987,4 @@
}
ACPI_EXPORT_SYMBOL(acpi_release_global_lock)
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 1768bbe..77cee5a 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -49,6 +49,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxfevnt")
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/*******************************************************************************
*
* FUNCTION: acpi_enable
@@ -352,3 +353,4 @@
}
ACPI_EXPORT_SYMBOL(acpi_get_event_status)
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 33388fd..86f9b34 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -50,6 +50,7 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxfgpe")
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/******************************************************************************
*
* FUNCTION: acpi_update_all_gpes
@@ -695,3 +696,4 @@
}
ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c
index d21ec5f..d0b9ed5 100644
--- a/drivers/acpi/acpica/hwacpi.c
+++ b/drivers/acpi/acpica/hwacpi.c
@@ -48,6 +48,7 @@
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwacpi")
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/******************************************************************************
*
* FUNCTION: acpi_hw_set_mode
@@ -166,3 +167,5 @@
return_UINT32(ACPI_SYS_MODE_LEGACY);
}
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
new file mode 100644
index 0000000..29e8592
--- /dev/null
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -0,0 +1,247 @@
+/******************************************************************************
+ *
+ * Name: hwesleep.c - ACPI Hardware Sleep/Wake Support functions for the
+ * extended FADT-V5 sleep registers.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_HARDWARE
+ACPI_MODULE_NAME("hwesleep")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_execute_sleep_method
+ *
+ * PARAMETERS: method_pathname - Pathname of method to execute
+ * integer_argument - Argument to pass to the method
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Execute a sleep/wake related method with one integer argument
+ * and no return value.
+ *
+ ******************************************************************************/
+void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(hw_execute_sleep_method);
+
+ /* One argument, integer_argument; No return value expected */
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = (u64)integer_argument;
+
+ status = acpi_evaluate_object(NULL, method_pathname, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "While executing method %s",
+ method_pathname));
+ }
+
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_extended_sleep
+ *
+ * PARAMETERS: sleep_state - Which sleep state to enter
+ * Flags - ACPI_EXECUTE_GTS to run optional method
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Enter a system sleep state via the extended FADT sleep
+ * registers (V5 FADT).
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags)
+{
+ acpi_status status;
+ u8 sleep_type_value;
+ u64 sleep_status;
+
+ ACPI_FUNCTION_TRACE(hw_extended_sleep);
+
+ /* Extended sleep registers must be valid */
+
+ if (!acpi_gbl_FADT.sleep_control.address ||
+ !acpi_gbl_FADT.sleep_status.address) {
+ return_ACPI_STATUS(AE_NOT_EXIST);
+ }
+
+ /* Clear wake status (WAK_STS) */
+
+ status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ acpi_gbl_system_awake_and_running = FALSE;
+
+ /* Optionally execute _GTS (Going To Sleep) */
+
+ if (flags & ACPI_EXECUTE_GTS) {
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state);
+ }
+
+ /* Flush caches, as per ACPI specification */
+
+ ACPI_FLUSH_CPU_CACHE();
+
+ /*
+ * Set the SLP_TYP and SLP_EN bits.
+ *
+ * Note: We only use the first value returned by the \_Sx method
+ * (acpi_gbl_sleep_type_a) - As per ACPI specification.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT,
+ "Entering sleep state [S%u]\n", sleep_state));
+
+ sleep_type_value =
+ ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
+ ACPI_X_SLEEP_TYPE_MASK);
+
+ status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
+ &acpi_gbl_FADT.sleep_control);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Wait for transition back to Working State */
+
+ do {
+ status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS));
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_extended_wake_prep
+ *
+ * PARAMETERS: sleep_state - Which sleep state we just exited
+ * Flags - ACPI_EXECUTE_BFS to run optional method
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after
+ * a sleep. Called with interrupts ENABLED.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags)
+{
+ acpi_status status;
+ u8 sleep_type_value;
+
+ ACPI_FUNCTION_TRACE(hw_extended_wake_prep);
+
+ status = acpi_get_sleep_type_data(ACPI_STATE_S0,
+ &acpi_gbl_sleep_type_a,
+ &acpi_gbl_sleep_type_b);
+ if (ACPI_SUCCESS(status)) {
+ sleep_type_value =
+ ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
+ ACPI_X_SLEEP_TYPE_MASK);
+
+ (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
+ &acpi_gbl_FADT.sleep_control);
+ }
+
+ /* Optionally execute _BFS (Back From Sleep) */
+
+ if (flags & ACPI_EXECUTE_BFS) {
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state);
+ }
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_extended_wake
+ *
+ * PARAMETERS: sleep_state - Which sleep state we just exited
+ * Flags - Reserved, set to zero
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
+ * Called with interrupts ENABLED.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags)
+{
+ ACPI_FUNCTION_TRACE(hw_extended_wake);
+
+ /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
+
+ acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
+
+ /* Execute the wake methods */
+
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING);
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state);
+
+ /*
+ * Some BIOS code assumes that WAK_STS will be cleared on resume
+ * and use it to determine whether the system is rebooting or
+ * resuming. Clear WAK_STS for compatibility.
+ */
+ (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
+ acpi_gbl_system_awake_and_running = TRUE;
+
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
+ return_ACPI_STATUS(AE_OK);
+}
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 1a6894a..25bd28c 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -48,7 +48,7 @@
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwgpe")
-
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static acpi_status
acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
@@ -479,3 +479,5 @@
status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL);
return_ACPI_STATUS(status);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 4ea4eeb5..6b6c83b 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -51,6 +51,7 @@
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwregs")
+#if (!ACPI_REDUCED_HARDWARE)
/* Local Prototypes */
static acpi_status
acpi_hw_read_multiple(u32 *value,
@@ -62,6 +63,8 @@
struct acpi_generic_address *register_a,
struct acpi_generic_address *register_b);
+#endif /* !ACPI_REDUCED_HARDWARE */
+
/******************************************************************************
*
* FUNCTION: acpi_hw_validate_register
@@ -154,6 +157,7 @@
acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
{
u64 address;
+ u64 value64;
acpi_status status;
ACPI_FUNCTION_NAME(hw_read);
@@ -175,7 +179,9 @@
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_read_memory((acpi_physical_address)
- address, value, reg->bit_width);
+ address, &value64, reg->bit_width);
+
+ *value = (u32)value64;
} else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
status = acpi_hw_read_port((acpi_io_address)
@@ -225,7 +231,8 @@
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_write_memory((acpi_physical_address)
- address, value, reg->bit_width);
+ address, (u64)value,
+ reg->bit_width);
} else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
status = acpi_hw_write_port((acpi_io_address)
@@ -240,6 +247,7 @@
return (status);
}
+#if (!ACPI_REDUCED_HARDWARE)
/*******************************************************************************
*
* FUNCTION: acpi_hw_clear_acpi_status
@@ -285,7 +293,7 @@
/*******************************************************************************
*
- * FUNCTION: acpi_hw_get_register_bit_mask
+ * FUNCTION: acpi_hw_get_bit_register_info
*
* PARAMETERS: register_id - Index of ACPI Register to access
*
@@ -658,3 +666,5 @@
return (status);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 3c4a922..8ab325c 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -1,7 +1,7 @@
-
/******************************************************************************
*
- * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface
+ * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the
+ * original/legacy sleep/PM registers.
*
*****************************************************************************/
@@ -44,212 +44,36 @@
#include <acpi/acpi.h>
#include "accommon.h"
-#include "actables.h"
#include <linux/tboot.h>
#include <linux/module.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwsleep")
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/*******************************************************************************
*
- * FUNCTION: acpi_set_firmware_waking_vector
- *
- * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode
- * entry point.
- *
- * RETURN: Status
- *
- * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS
- *
- ******************************************************************************/
-acpi_status
-acpi_set_firmware_waking_vector(u32 physical_address)
-{
- ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
-
-
- /*
- * According to the ACPI specification 2.0c and later, the 64-bit
- * waking vector should be cleared and the 32-bit waking vector should
- * be used, unless we want the wake-up code to be called by the BIOS in
- * Protected Mode. Some systems (for example HP dv5-1004nr) are known
- * to fail to resume if the 64-bit vector is used.
- */
-
- /* Set the 32-bit vector */
-
- acpi_gbl_FACS->firmware_waking_vector = physical_address;
-
- /* Clear the 64-bit vector if it exists */
-
- if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) {
- acpi_gbl_FACS->xfirmware_waking_vector = 0;
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
-
-#if ACPI_MACHINE_WIDTH == 64
-/*******************************************************************************
- *
- * FUNCTION: acpi_set_firmware_waking_vector64
- *
- * PARAMETERS: physical_address - 64-bit physical address of ACPI protected
- * mode entry point.
- *
- * RETURN: Status
- *
- * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if
- * it exists in the table. This function is intended for use with
- * 64-bit host operating systems.
- *
- ******************************************************************************/
-acpi_status
-acpi_set_firmware_waking_vector64(u64 physical_address)
-{
- ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64);
-
-
- /* Determine if the 64-bit vector actually exists */
-
- if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) {
- return_ACPI_STATUS(AE_NOT_EXIST);
- }
-
- /* Clear 32-bit vector, set the 64-bit X_ vector */
-
- acpi_gbl_FACS->firmware_waking_vector = 0;
- acpi_gbl_FACS->xfirmware_waking_vector = physical_address;
-
- return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64)
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_enter_sleep_state_prep
+ * FUNCTION: acpi_hw_legacy_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
+ * Flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
- * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231)
- * This function must execute with interrupts enabled.
- * We break sleeping into 2 stages so that OSPM can handle
- * various OS-specific tasks between the two steps.
- *
- ******************************************************************************/
-acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
-{
- acpi_status status;
- struct acpi_object_list arg_list;
- union acpi_object arg;
-
- ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
-
- /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */
-
- status = acpi_get_sleep_type_data(sleep_state,
- &acpi_gbl_sleep_type_a,
- &acpi_gbl_sleep_type_b);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Setup parameter object */
-
- arg_list.count = 1;
- arg_list.pointer = &arg;
-
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
-
- /* Run the _PTS method */
-
- status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- return_ACPI_STATUS(status);
- }
-
- /* Setup the argument to _SST */
-
- switch (sleep_state) {
- case ACPI_STATE_S0:
- arg.integer.value = ACPI_SST_WORKING;
- break;
-
- case ACPI_STATE_S1:
- case ACPI_STATE_S2:
- case ACPI_STATE_S3:
- arg.integer.value = ACPI_SST_SLEEPING;
- break;
-
- case ACPI_STATE_S4:
- arg.integer.value = ACPI_SST_SLEEP_CONTEXT;
- break;
-
- default:
- arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */
- break;
- }
-
- /*
- * Set the system indicators to show the desired sleep state.
- * _SST is an optional method (return no error if not found)
- */
- status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status,
- "While executing method _SST"));
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
-
-static unsigned int gts, bfs;
-module_param(gts, uint, 0644);
-module_param(bfs, uint, 0644);
-MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
-MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_enter_sleep_state
- *
- * PARAMETERS: sleep_state - Which sleep state to enter
- *
- * RETURN: Status
- *
- * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
+ * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
-acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
+acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags)
{
- u32 pm1a_control;
- u32 pm1b_control;
struct acpi_bit_register_info *sleep_type_reg_info;
struct acpi_bit_register_info *sleep_enable_reg_info;
+ u32 pm1a_control;
+ u32 pm1b_control;
u32 in_value;
- struct acpi_object_list arg_list;
- union acpi_object arg;
acpi_status status;
- ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
-
- if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
- (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
- ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
- acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
- return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
- }
+ ACPI_FUNCTION_TRACE(hw_legacy_sleep);
sleep_type_reg_info =
acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
@@ -271,6 +95,18 @@
return_ACPI_STATUS(status);
}
+ if (sleep_state != ACPI_STATE_S5) {
+ /*
+ * Disable BM arbitration. This feature is contained within an
+ * optional register (PM2 Control), so ignore a BAD_ADDRESS
+ * exception.
+ */
+ status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
+ if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
@@ -286,18 +122,10 @@
return_ACPI_STATUS(status);
}
- if (gts) {
- /* Execute the _GTS method */
+ /* Optionally execute _GTS (Going To Sleep) */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
-
- status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- return_ACPI_STATUS(status);
- }
+ if (flags & ACPI_EXECUTE_GTS) {
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state);
}
/* Get current value of PM1A control */
@@ -375,114 +203,44 @@
}
}
- /* Wait until we enter sleep state */
+ /* Wait for transition back to Working State */
do {
- status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS,
- &in_value);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Spin until we wake */
-
- } while (!in_value);
-
- return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_enter_sleep_state_s4bios
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Perform a S4 bios request.
- * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
- *
- ******************************************************************************/
-acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
-{
- u32 in_value;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
-
- /* Clear the wake status bit (PM1) */
-
- status =
- acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- status = acpi_hw_clear_acpi_status();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /*
- * 1) Disable/Clear all GPEs
- * 2) Enable all wakeup GPEs
- */
- status = acpi_hw_disable_all_gpes();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- acpi_gbl_system_awake_and_running = FALSE;
-
- status = acpi_hw_enable_all_wakeup_gpes();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- ACPI_FLUSH_CPU_CACHE();
-
- status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
- (u32) acpi_gbl_FADT.S4bios_request, 8);
-
- do {
- acpi_os_stall(1000);
status =
acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
+
} while (!in_value);
return_ACPI_STATUS(AE_OK);
}
-ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
-
/*******************************************************************************
*
- * FUNCTION: acpi_leave_sleep_state_prep
+ * FUNCTION: acpi_hw_legacy_wake_prep
*
- * PARAMETERS: sleep_state - Which sleep state we are exiting
+ * PARAMETERS: sleep_state - Which sleep state we just exited
+ * Flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
* DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
* sleep.
- * Called with interrupts DISABLED.
+ * Called with interrupts ENABLED.
*
******************************************************************************/
-acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
+
+acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags)
{
- struct acpi_object_list arg_list;
- union acpi_object arg;
acpi_status status;
struct acpi_bit_register_info *sleep_type_reg_info;
struct acpi_bit_register_info *sleep_enable_reg_info;
u32 pm1a_control;
u32 pm1b_control;
- ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
+ ACPI_FUNCTION_TRACE(hw_legacy_wake_prep);
/*
* Set SLP_TYPE and SLP_EN to state S0.
@@ -525,27 +283,20 @@
}
}
- if (bfs) {
- /* Execute the _BFS method */
+ /* Optionally execute _BFS (Back From Sleep) */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
-
- status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
- }
+ if (flags & ACPI_EXECUTE_BFS) {
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state);
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
- * FUNCTION: acpi_leave_sleep_state
+ * FUNCTION: acpi_hw_legacy_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
+ * Flags - Reserved, set to zero
*
* RETURN: Status
*
@@ -553,31 +304,17 @@
* Called with interrupts ENABLED.
*
******************************************************************************/
-acpi_status acpi_leave_sleep_state(u8 sleep_state)
+
+acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags)
{
- struct acpi_object_list arg_list;
- union acpi_object arg;
acpi_status status;
- ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
+ ACPI_FUNCTION_TRACE(hw_legacy_wake);
/* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
-
- /* Setup parameter object */
-
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
-
- /* Ignore any errors from these methods */
-
- arg.integer.value = ACPI_SST_WAKING;
- status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
- }
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING);
/*
* GPEs must be enabled before _WAK is called as GPEs
@@ -591,46 +328,50 @@
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
+
status = acpi_hw_enable_all_runtime_gpes();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
- arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
- }
- /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
+ /*
+ * Now we can execute _WAK, etc. Some machines require that the GPEs
+ * are enabled before the wake methods are executed.
+ */
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state);
/*
- * Some BIOSes assume that WAK_STS will be cleared on resume and use
- * it to determine whether the system is rebooting or resuming. Clear
- * it for compatibility.
+ * Some BIOS code assumes that WAK_STS will be cleared on resume
+ * and use it to determine whether the system is rebooting or
+ * resuming. Clear WAK_STS for compatibility.
*/
acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1);
-
acpi_gbl_system_awake_and_running = TRUE;
/* Enable power button */
(void)
acpi_write_bit_register(acpi_gbl_fixed_event_info
- [ACPI_EVENT_POWER_BUTTON].
- enable_register_id, ACPI_ENABLE_EVENT);
+ [ACPI_EVENT_POWER_BUTTON].
+ enable_register_id, ACPI_ENABLE_EVENT);
(void)
acpi_write_bit_register(acpi_gbl_fixed_event_info
- [ACPI_EVENT_POWER_BUTTON].
- status_register_id, ACPI_CLEAR_STATUS);
+ [ACPI_EVENT_POWER_BUTTON].
+ status_register_id, ACPI_CLEAR_STATUS);
- arg.integer.value = ACPI_SST_WORKING;
- status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
+ /*
+ * Enable BM arbitration. This feature is contained within an
+ * optional register (PM2 Control), so ignore a BAD_ADDRESS
+ * exception.
+ */
+ status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
+ if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
+ return_ACPI_STATUS(status);
}
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
return_ACPI_STATUS(status);
}
-ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index d4973d9..f1b2c3b 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -49,6 +49,7 @@
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwtimer")
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/******************************************************************************
*
* FUNCTION: acpi_get_timer_resolution
@@ -187,3 +188,4 @@
}
ACPI_EXPORT_SYMBOL(acpi_get_timer_duration)
+#endif /* !ACPI_REDUCED_HARDWARE */
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 9d38eb6..ab513a9 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -74,8 +74,7 @@
/* Check if the reset register is supported */
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
- !reset_reg->address) {
+ if (!reset_reg->address) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
@@ -138,11 +137,6 @@
return (status);
}
- width = reg->bit_width;
- if (width == 64) {
- width = 32; /* Break into two 32-bit transfers */
- }
-
/* Initialize entire 64-bit return value to zero */
*return_value = 0;
@@ -154,25 +148,18 @@
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_read_memory((acpi_physical_address)
- address, &value, width);
+ address, return_value,
+ reg->bit_width);
if (ACPI_FAILURE(status)) {
return (status);
}
- *return_value = value;
-
- if (reg->bit_width == 64) {
-
- /* Read the top 32 bits */
-
- status = acpi_os_read_memory((acpi_physical_address)
- (address + 4), &value, 32);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- *return_value |= ((u64)value << 32);
- }
} else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+ width = reg->bit_width;
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
+ }
+
status = acpi_hw_read_port((acpi_io_address)
address, &value, width);
if (ACPI_FAILURE(status)) {
@@ -231,33 +218,23 @@
return (status);
}
- width = reg->bit_width;
- if (width == 64) {
- width = 32; /* Break into two 32-bit transfers */
- }
-
/*
* Two address spaces supported: Memory or IO. PCI_Config is
* not supported here because the GAS structure is insufficient
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_write_memory((acpi_physical_address)
- address, ACPI_LODWORD(value),
- width);
+ address, value, reg->bit_width);
if (ACPI_FAILURE(status)) {
return (status);
}
-
- if (reg->bit_width == 64) {
- status = acpi_os_write_memory((acpi_physical_address)
- (address + 4),
- ACPI_HIDWORD(value), 32);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- }
} else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+ width = reg->bit_width;
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
+ }
+
status = acpi_hw_write_port((acpi_io_address)
address, ACPI_LODWORD(value),
width);
@@ -286,6 +263,7 @@
ACPI_EXPORT_SYMBOL(acpi_write)
+#if (!ACPI_REDUCED_HARDWARE)
/*******************************************************************************
*
* FUNCTION: acpi_read_bit_register
@@ -453,7 +431,7 @@
}
ACPI_EXPORT_SYMBOL(acpi_write_bit_register)
-
+#endif /* !ACPI_REDUCED_HARDWARE */
/*******************************************************************************
*
* FUNCTION: acpi_get_sleep_type_data
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
new file mode 100644
index 0000000..762d059
--- /dev/null
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -0,0 +1,431 @@
+/******************************************************************************
+ *
+ * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include <linux/module.h>
+
+#define _COMPONENT ACPI_HARDWARE
+ACPI_MODULE_NAME("hwxfsleep")
+
+/* Local prototypes */
+static acpi_status
+acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id);
+
+/*
+ * Dispatch table used to efficiently branch to the various sleep
+ * functions.
+ */
+#define ACPI_SLEEP_FUNCTION_ID 0
+#define ACPI_WAKE_PREP_FUNCTION_ID 1
+#define ACPI_WAKE_FUNCTION_ID 2
+
+/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */
+
+static struct acpi_sleep_functions acpi_sleep_dispatch[] = {
+ {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep),
+ acpi_hw_extended_sleep},
+ {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep),
+ acpi_hw_extended_wake_prep},
+ {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake}
+};
+
+/*
+ * These functions are removed for the ACPI_REDUCED_HARDWARE case:
+ * acpi_set_firmware_waking_vector
+ * acpi_set_firmware_waking_vector64
+ * acpi_enter_sleep_state_s4bios
+ */
+
+#if (!ACPI_REDUCED_HARDWARE)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_set_firmware_waking_vector
+ *
+ * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode
+ * entry point.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS
+ *
+ ******************************************************************************/
+
+acpi_status acpi_set_firmware_waking_vector(u32 physical_address)
+{
+ ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
+
+
+ /*
+ * According to the ACPI specification 2.0c and later, the 64-bit
+ * waking vector should be cleared and the 32-bit waking vector should
+ * be used, unless we want the wake-up code to be called by the BIOS in
+ * Protected Mode. Some systems (for example HP dv5-1004nr) are known
+ * to fail to resume if the 64-bit vector is used.
+ */
+
+ /* Set the 32-bit vector */
+
+ acpi_gbl_FACS->firmware_waking_vector = physical_address;
+
+ /* Clear the 64-bit vector if it exists */
+
+ if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) {
+ acpi_gbl_FACS->xfirmware_waking_vector = 0;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
+
+#if ACPI_MACHINE_WIDTH == 64
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_set_firmware_waking_vector64
+ *
+ * PARAMETERS: physical_address - 64-bit physical address of ACPI protected
+ * mode entry point.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if
+ * it exists in the table. This function is intended for use with
+ * 64-bit host operating systems.
+ *
+ ******************************************************************************/
+acpi_status acpi_set_firmware_waking_vector64(u64 physical_address)
+{
+ ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64);
+
+
+ /* Determine if the 64-bit vector actually exists */
+
+ if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) {
+ return_ACPI_STATUS(AE_NOT_EXIST);
+ }
+
+ /* Clear 32-bit vector, set the 64-bit X_ vector */
+
+ acpi_gbl_FACS->firmware_waking_vector = 0;
+ acpi_gbl_FACS->xfirmware_waking_vector = physical_address;
+ return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64)
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_enter_sleep_state_s4bios
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Perform a S4 bios request.
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
+ *
+ ******************************************************************************/
+acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
+{
+ u32 in_value;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
+
+ /* Clear the wake status bit (PM1) */
+
+ status =
+ acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ status = acpi_hw_clear_acpi_status();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * 1) Disable/Clear all GPEs
+ * 2) Enable all wakeup GPEs
+ */
+ status = acpi_hw_disable_all_gpes();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ acpi_gbl_system_awake_and_running = FALSE;
+
+ status = acpi_hw_enable_all_wakeup_gpes();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ ACPI_FLUSH_CPU_CACHE();
+
+ status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
+ (u32)acpi_gbl_FADT.S4bios_request, 8);
+
+ do {
+ acpi_os_stall(1000);
+ status =
+ acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ } while (!in_value);
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
+#endif /* !ACPI_REDUCED_HARDWARE */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_sleep_dispatch
+ *
+ * PARAMETERS: sleep_state - Which sleep state to enter/exit
+ * function_id - Sleep, wake_prep, or Wake
+ *
+ * RETURN: Status from the invoked sleep handling function.
+ *
+ * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling
+ * function.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id)
+{
+ acpi_status status;
+ struct acpi_sleep_functions *sleep_functions =
+ &acpi_sleep_dispatch[function_id];
+
+#if (!ACPI_REDUCED_HARDWARE)
+
+ /*
+ * If the Hardware Reduced flag is set (from the FADT), we must
+ * use the extended sleep registers
+ */
+ if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) {
+ status = sleep_functions->extended_function(sleep_state, flags);
+ } else {
+ /* Legacy sleep */
+
+ status = sleep_functions->legacy_function(sleep_state, flags);
+ }
+
+ return (status);
+
+#else
+ /*
+ * For the case where reduced-hardware-only code is being generated,
+ * we know that only the extended sleep registers are available
+ */
+ status = sleep_functions->extended_function(sleep_state, flags);
+ return (status);
+
+#endif /* !ACPI_REDUCED_HARDWARE */
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_enter_sleep_state_prep
+ *
+ * PARAMETERS: sleep_state - Which sleep state to enter
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Prepare to enter a system sleep state.
+ * This function must execute with interrupts enabled.
+ * We break sleeping into 2 stages so that OSPM can handle
+ * various OS-specific tasks between the two steps.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
+{
+ acpi_status status;
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+ u32 sst_value;
+
+ ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
+
+ status = acpi_get_sleep_type_data(sleep_state,
+ &acpi_gbl_sleep_type_a,
+ &acpi_gbl_sleep_type_b);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Execute the _PTS method (Prepare To Sleep) */
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
+
+ status =
+ acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Setup the argument to the _SST method (System STatus) */
+
+ switch (sleep_state) {
+ case ACPI_STATE_S0:
+ sst_value = ACPI_SST_WORKING;
+ break;
+
+ case ACPI_STATE_S1:
+ case ACPI_STATE_S2:
+ case ACPI_STATE_S3:
+ sst_value = ACPI_SST_SLEEPING;
+ break;
+
+ case ACPI_STATE_S4:
+ sst_value = ACPI_SST_SLEEP_CONTEXT;
+ break;
+
+ default:
+ sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */
+ break;
+ }
+
+ /*
+ * Set the system indicators to show the desired sleep state.
+ * _SST is an optional method (return no error if not found)
+ */
+ acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value);
+ return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_enter_sleep_state
+ *
+ * PARAMETERS: sleep_state - Which sleep state to enter
+ * Flags - ACPI_EXECUTE_GTS to run optional method
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
+ *
+ ******************************************************************************/
+acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
+
+ if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
+ (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
+ ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
+ acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
+ return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
+ }
+
+ status =
+ acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_leave_sleep_state_prep
+ *
+ * PARAMETERS: sleep_state - Which sleep state we are exiting
+ * Flags - ACPI_EXECUTE_BFS to run optional method
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
+ * sleep.
+ * Called with interrupts DISABLED.
+ *
+ ******************************************************************************/
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
+
+ status =
+ acpi_hw_sleep_dispatch(sleep_state, flags,
+ ACPI_WAKE_PREP_FUNCTION_ID);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_leave_sleep_state
+ *
+ * PARAMETERS: sleep_state - Which sleep state we are exiting
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
+ * Called with interrupts ENABLED.
+ *
+ ******************************************************************************/
+acpi_status acpi_leave_sleep_state(u8 sleep_state)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
+
+
+ status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index b7f2b3b..3f7f3f6 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -242,7 +242,20 @@
if (!obj_desc) {
- /* No attached object, we are done */
+ /* No attached object. Some types should always have an object */
+
+ switch (type) {
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_PACKAGE:
+ case ACPI_TYPE_BUFFER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_METHOD:
+ acpi_os_printf("<No attached object>");
+ break;
+
+ default:
+ break;
+ }
acpi_os_printf("\n");
return (AE_OK);
diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c
index 30ea5bc..3b5acb0 100644
--- a/drivers/acpi/acpica/nsdumpdv.c
+++ b/drivers/acpi/acpica/nsdumpdv.c
@@ -121,7 +121,7 @@
return;
}
- status = acpi_get_handle(NULL, ACPI_NS_SYSTEM_BUS, &sys_bus_handle);
+ status = acpi_get_handle(NULL, METHOD_NAME__SB_, &sys_bus_handle);
if (ACPI_FAILURE(status)) {
return;
}
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index bbe46a4..23ce096 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -638,8 +638,8 @@
/* Create the new outer package and populate it */
status =
- acpi_ns_repair_package_list(data,
- return_object_ptr);
+ acpi_ns_wrap_with_package(data, *elements,
+ return_object_ptr);
if (ACPI_FAILURE(status)) {
return (status);
}
diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c
index 9c35d20..5519a64 100644
--- a/drivers/acpi/acpica/nsrepair.c
+++ b/drivers/acpi/acpica/nsrepair.c
@@ -71,11 +71,10 @@
* Buffer -> String
* Buffer -> Package of Integers
* Package -> Package of one Package
+ * An incorrect standalone object is wrapped with required outer package
*
* Additional possible repairs:
- *
* Required package elements that are NULL replaced by Integer/String/Buffer
- * Incorrect standalone package wrapped with required outer package
*
******************************************************************************/
/* Local prototypes */
@@ -91,10 +90,6 @@
acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
union acpi_operand_object **return_object);
-static acpi_status
-acpi_ns_convert_to_package(union acpi_operand_object *original_object,
- union acpi_operand_object **return_object);
-
/*******************************************************************************
*
* FUNCTION: acpi_ns_repair_object
@@ -151,9 +146,24 @@
}
}
if (expected_btypes & ACPI_RTYPE_PACKAGE) {
- status = acpi_ns_convert_to_package(return_object, &new_object);
+ /*
+ * A package is expected. We will wrap the existing object with a
+ * new package object. It is often the case that if a variable-length
+ * package is required, but there is only a single object needed, the
+ * BIOS will return that object instead of wrapping it with a Package
+ * object. Note: after the wrapping, the package will be validated
+ * for correct contents (expected object type or types).
+ */
+ status =
+ acpi_ns_wrap_with_package(data, return_object, &new_object);
if (ACPI_SUCCESS(status)) {
- goto object_repaired;
+ /*
+ * The original object just had its reference count
+ * incremented for being inserted into the new package.
+ */
+ *return_object_ptr = new_object; /* New Package object */
+ data->flags |= ACPI_OBJECT_REPAIRED;
+ return (AE_OK);
}
}
@@ -165,22 +175,27 @@
/* Object was successfully repaired */
- /*
- * If the original object is a package element, we need to:
- * 1. Set the reference count of the new object to match the
- * reference count of the old object.
- * 2. Decrement the reference count of the original object.
- */
if (package_index != ACPI_NOT_PACKAGE_ELEMENT) {
- new_object->common.reference_count =
- return_object->common.reference_count;
+ /*
+ * The original object is a package element. We need to
+ * decrement the reference count of the original object,
+ * for removing it from the package.
+ *
+ * However, if the original object was just wrapped with a
+ * package object as part of the repair, we don't need to
+ * change the reference count.
+ */
+ if (!(data->flags & ACPI_OBJECT_WRAPPED)) {
+ new_object->common.reference_count =
+ return_object->common.reference_count;
- if (return_object->common.reference_count > 1) {
- return_object->common.reference_count--;
+ if (return_object->common.reference_count > 1) {
+ return_object->common.reference_count--;
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
- "%s: Converted %s to expected %s at index %u\n",
+ "%s: Converted %s to expected %s at Package index %u\n",
data->pathname,
acpi_ut_get_object_type_name(return_object),
acpi_ut_get_object_type_name(new_object),
@@ -453,65 +468,6 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ns_convert_to_package
- *
- * PARAMETERS: original_object - Object to be converted
- * return_object - Where the new converted object is returned
- *
- * RETURN: Status. AE_OK if conversion was successful.
- *
- * DESCRIPTION: Attempt to convert a Buffer object to a Package. Each byte of
- * the buffer is converted to a single integer package element.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ns_convert_to_package(union acpi_operand_object *original_object,
- union acpi_operand_object **return_object)
-{
- union acpi_operand_object *new_object;
- union acpi_operand_object **elements;
- u32 length;
- u8 *buffer;
-
- switch (original_object->common.type) {
- case ACPI_TYPE_BUFFER:
-
- /* Buffer-to-Package conversion */
-
- length = original_object->buffer.length;
- new_object = acpi_ut_create_package_object(length);
- if (!new_object) {
- return (AE_NO_MEMORY);
- }
-
- /* Convert each buffer byte to an integer package element */
-
- elements = new_object->package.elements;
- buffer = original_object->buffer.pointer;
-
- while (length--) {
- *elements =
- acpi_ut_create_integer_object((u64) *buffer);
- if (!*elements) {
- acpi_ut_remove_reference(new_object);
- return (AE_NO_MEMORY);
- }
- elements++;
- buffer++;
- }
- break;
-
- default:
- return (AE_AML_OPERAND_TYPE);
- }
-
- *return_object = new_object;
- return (AE_OK);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ns_repair_null_element
*
* PARAMETERS: Data - Pointer to validation data structure
@@ -677,55 +633,56 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ns_repair_package_list
+ * FUNCTION: acpi_ns_wrap_with_package
*
* PARAMETERS: Data - Pointer to validation data structure
- * obj_desc_ptr - Pointer to the object to repair. The new
- * package object is returned here,
- * overwriting the old object.
+ * original_object - Pointer to the object to repair.
+ * obj_desc_ptr - The new package object is returned here
*
* RETURN: Status, new object in *obj_desc_ptr
*
- * DESCRIPTION: Repair a common problem with objects that are defined to return
- * a variable-length Package of Packages. If the variable-length
- * is one, some BIOS code mistakenly simply declares a single
- * Package instead of a Package with one sub-Package. This
- * function attempts to repair this error by wrapping a Package
- * object around the original Package, creating the correct
- * Package with one sub-Package.
+ * DESCRIPTION: Repair a common problem with objects that are defined to
+ * return a variable-length Package of sub-objects. If there is
+ * only one sub-object, some BIOS code mistakenly simply declares
+ * the single object instead of a Package with one sub-object.
+ * This function attempts to repair this error by wrapping a
+ * Package object around the original object, creating the
+ * correct and expected Package with one sub-object.
*
* Names that can be repaired in this manner include:
- * _ALR, _CSD, _HPX, _MLS, _PRT, _PSS, _TRT, TSS
+ * _ALR, _CSD, _HPX, _MLS, _PLD, _PRT, _PSS, _TRT, _TSS,
+ * _BCL, _DOD, _FIX, _Sx
*
******************************************************************************/
acpi_status
-acpi_ns_repair_package_list(struct acpi_predefined_data *data,
- union acpi_operand_object **obj_desc_ptr)
+acpi_ns_wrap_with_package(struct acpi_predefined_data *data,
+ union acpi_operand_object *original_object,
+ union acpi_operand_object **obj_desc_ptr)
{
union acpi_operand_object *pkg_obj_desc;
- ACPI_FUNCTION_NAME(ns_repair_package_list);
+ ACPI_FUNCTION_NAME(ns_wrap_with_package);
/*
* Create the new outer package and populate it. The new package will
- * have a single element, the lone subpackage.
+ * have a single element, the lone sub-object.
*/
pkg_obj_desc = acpi_ut_create_package_object(1);
if (!pkg_obj_desc) {
return (AE_NO_MEMORY);
}
- pkg_obj_desc->package.elements[0] = *obj_desc_ptr;
+ pkg_obj_desc->package.elements[0] = original_object;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
+ "%s: Wrapped %s with expected Package object\n",
+ data->pathname,
+ acpi_ut_get_object_type_name(original_object)));
/* Return the new object in the object pointer */
*obj_desc_ptr = pkg_obj_desc;
- data->flags |= ACPI_OBJECT_REPAIRED;
-
- ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
- "%s: Repaired incorrectly formed Package\n",
- data->pathname));
-
+ data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED;
return (AE_OK);
}
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index a535b7a..7511375 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -341,7 +341,7 @@
if (!acpi_ns_valid_path_separator(*external_name) &&
(*external_name != 0)) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ return_ACPI_STATUS(AE_BAD_PATHNAME);
}
/* Move on the next segment */
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index c5d8704..4c9c760 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -363,10 +363,6 @@
u32 address32;
u32 i;
- /* Update the local FADT table header length */
-
- acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
-
/*
* Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary.
* Later code will always use the X 64-bit field. Also, check for an
@@ -408,6 +404,10 @@
acpi_gbl_FADT.boot_flags = 0;
}
+ /* Update the local FADT table header length */
+
+ acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
+
/*
* Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X"
* generic address structures as necessary. Later code will always use
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index 1aecf7b..c03500b 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -114,7 +114,6 @@
{
u32 i;
acpi_status status = AE_OK;
- struct acpi_table_header *override_table = NULL;
ACPI_FUNCTION_TRACE(tb_add_table);
@@ -224,25 +223,10 @@
/*
* ACPI Table Override:
* Allow the host to override dynamically loaded tables.
+ * NOTE: the table is fully mapped at this point, and the mapping will
+ * be deleted by tb_table_override if the table is actually overridden.
*/
- status = acpi_os_table_override(table_desc->pointer, &override_table);
- if (ACPI_SUCCESS(status) && override_table) {
- ACPI_INFO((AE_INFO,
- "%4.4s @ 0x%p Table override, replaced with:",
- table_desc->pointer->signature,
- ACPI_CAST_PTR(void, table_desc->address)));
-
- /* We can delete the table that was passed as a parameter */
-
- acpi_tb_delete_table(table_desc);
-
- /* Setup descriptor for the new table */
-
- table_desc->address = ACPI_PTR_TO_PHYSADDR(override_table);
- table_desc->pointer = override_table;
- table_desc->length = override_table->length;
- table_desc->flags = ACPI_TABLE_ORIGIN_OVERRIDE;
- }
+ (void)acpi_tb_table_override(table_desc->pointer, table_desc);
/* Add the table to the global root table list */
@@ -263,6 +247,95 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_tb_table_override
+ *
+ * PARAMETERS: table_header - Header for the original table
+ * table_desc - Table descriptor initialized for the
+ * original table. May or may not be mapped.
+ *
+ * RETURN: Pointer to the entire new table. NULL if table not overridden.
+ * If overridden, installs the new table within the input table
+ * descriptor.
+ *
+ * DESCRIPTION: Attempt table override by calling the OSL override functions.
+ * Note: If the table is overridden, then the entire new table
+ * is mapped and returned by this function.
+ *
+ ******************************************************************************/
+
+struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header
+ *table_header,
+ struct acpi_table_desc
+ *table_desc)
+{
+ acpi_status status;
+ struct acpi_table_header *new_table = NULL;
+ acpi_physical_address new_address = 0;
+ u32 new_table_length = 0;
+ u8 new_flags;
+ char *override_type;
+
+ /* (1) Attempt logical override (returns a logical address) */
+
+ status = acpi_os_table_override(table_header, &new_table);
+ if (ACPI_SUCCESS(status) && new_table) {
+ new_address = ACPI_PTR_TO_PHYSADDR(new_table);
+ new_table_length = new_table->length;
+ new_flags = ACPI_TABLE_ORIGIN_OVERRIDE;
+ override_type = "Logical";
+ goto finish_override;
+ }
+
+ /* (2) Attempt physical override (returns a physical address) */
+
+ status = acpi_os_physical_table_override(table_header,
+ &new_address,
+ &new_table_length);
+ if (ACPI_SUCCESS(status) && new_address && new_table_length) {
+
+ /* Map the entire new table */
+
+ new_table = acpi_os_map_memory(new_address, new_table_length);
+ if (!new_table) {
+ ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY,
+ "%4.4s %p Attempted physical table override failed",
+ table_header->signature,
+ ACPI_CAST_PTR(void,
+ table_desc->address)));
+ return (NULL);
+ }
+
+ override_type = "Physical";
+ new_flags = ACPI_TABLE_ORIGIN_MAPPED;
+ goto finish_override;
+ }
+
+ return (NULL); /* There was no override */
+
+ finish_override:
+
+ ACPI_INFO((AE_INFO,
+ "%4.4s %p %s table override, new table: %p",
+ table_header->signature,
+ ACPI_CAST_PTR(void, table_desc->address),
+ override_type, new_table));
+
+ /* We can now unmap/delete the original table (if fully mapped) */
+
+ acpi_tb_delete_table(table_desc);
+
+ /* Setup descriptor for the new table */
+
+ table_desc->address = new_address;
+ table_desc->pointer = new_table;
+ table_desc->length = new_table_length;
+ table_desc->flags = new_flags;
+
+ return (new_table);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_tb_resize_root_table_list
*
* PARAMETERS: None
@@ -396,7 +469,11 @@
case ACPI_TABLE_ORIGIN_ALLOCATED:
ACPI_FREE(table_desc->pointer);
break;
- default:;
+
+ /* Not mapped or allocated, there is nothing we can do */
+
+ default:
+ return;
}
table_desc->pointer = NULL;
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index 09ca39e..0a706ca 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -118,6 +118,7 @@
return AE_OK;
}
+#if (!ACPI_REDUCED_HARDWARE)
/*******************************************************************************
*
* FUNCTION: acpi_tb_initialize_facs
@@ -148,6 +149,7 @@
&acpi_gbl_FACS));
return status;
}
+#endif /* !ACPI_REDUCED_HARDWARE */
/*******************************************************************************
*
@@ -444,7 +446,7 @@
* RETURN: None
*
* DESCRIPTION: Install an ACPI table into the global data structure. The
- * table override mechanism is implemented here to allow the host
+ * table override mechanism is called to allow the host
* OS to replace any table before it is installed in the root
* table array.
*
@@ -454,11 +456,9 @@
acpi_tb_install_table(acpi_physical_address address,
char *signature, u32 table_index)
{
- u8 flags;
- acpi_status status;
- struct acpi_table_header *table_to_install;
- struct acpi_table_header *mapped_table;
- struct acpi_table_header *override_table = NULL;
+ struct acpi_table_header *table;
+ struct acpi_table_header *final_table;
+ struct acpi_table_desc *table_desc;
if (!address) {
ACPI_ERROR((AE_INFO,
@@ -469,69 +469,78 @@
/* Map just the table header */
- mapped_table =
- acpi_os_map_memory(address, sizeof(struct acpi_table_header));
- if (!mapped_table) {
+ table = acpi_os_map_memory(address, sizeof(struct acpi_table_header));
+ if (!table) {
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory for table [%s] at %p",
+ signature, ACPI_CAST_PTR(void, address)));
return;
}
/* If a particular signature is expected (DSDT/FACS), it must match */
- if (signature && !ACPI_COMPARE_NAME(mapped_table->signature, signature)) {
+ if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) {
ACPI_ERROR((AE_INFO,
"Invalid signature 0x%X for ACPI table, expected [%s]",
- *ACPI_CAST_PTR(u32, mapped_table->signature),
- signature));
+ *ACPI_CAST_PTR(u32, table->signature), signature));
goto unmap_and_exit;
}
/*
+ * Initialize the table entry. Set the pointer to NULL, since the
+ * table is not fully mapped at this time.
+ */
+ table_desc = &acpi_gbl_root_table_list.tables[table_index];
+
+ table_desc->address = address;
+ table_desc->pointer = NULL;
+ table_desc->length = table->length;
+ table_desc->flags = ACPI_TABLE_ORIGIN_MAPPED;
+ ACPI_MOVE_32_TO_32(table_desc->signature.ascii, table->signature);
+
+ /*
* ACPI Table Override:
*
* Before we install the table, let the host OS override it with a new
* one if desired. Any table within the RSDT/XSDT can be replaced,
* including the DSDT which is pointed to by the FADT.
+ *
+ * NOTE: If the table is overridden, then final_table will contain a
+ * mapped pointer to the full new table. If the table is not overridden,
+ * or if there has been a physical override, then the table will be
+ * fully mapped later (in verify table). In any case, we must
+ * unmap the header that was mapped above.
*/
- status = acpi_os_table_override(mapped_table, &override_table);
- if (ACPI_SUCCESS(status) && override_table) {
- ACPI_INFO((AE_INFO,
- "%4.4s @ 0x%p Table override, replaced with:",
- mapped_table->signature, ACPI_CAST_PTR(void,
- address)));
-
- acpi_gbl_root_table_list.tables[table_index].pointer =
- override_table;
- address = ACPI_PTR_TO_PHYSADDR(override_table);
-
- table_to_install = override_table;
- flags = ACPI_TABLE_ORIGIN_OVERRIDE;
- } else {
- table_to_install = mapped_table;
- flags = ACPI_TABLE_ORIGIN_MAPPED;
+ final_table = acpi_tb_table_override(table, table_desc);
+ if (!final_table) {
+ final_table = table; /* There was no override */
}
- /* Initialize the table entry */
+ acpi_tb_print_table_header(table_desc->address, final_table);
- acpi_gbl_root_table_list.tables[table_index].address = address;
- acpi_gbl_root_table_list.tables[table_index].length =
- table_to_install->length;
- acpi_gbl_root_table_list.tables[table_index].flags = flags;
-
- ACPI_MOVE_32_TO_32(&
- (acpi_gbl_root_table_list.tables[table_index].
- signature), table_to_install->signature);
-
- acpi_tb_print_table_header(address, table_to_install);
+ /* Set the global integer width (based upon revision of the DSDT) */
if (table_index == ACPI_TABLE_INDEX_DSDT) {
+ acpi_ut_set_integer_width(final_table->revision);
+ }
- /* Global integer width is based upon revision of the DSDT */
-
- acpi_ut_set_integer_width(table_to_install->revision);
+ /*
+ * If we have a physical override during this early loading of the ACPI
+ * tables, unmap the table for now. It will be mapped again later when
+ * it is actually used. This supports very early loading of ACPI tables,
+ * before virtual memory is fully initialized and running within the
+ * host OS. Note: A logical override has the ACPI_TABLE_ORIGIN_OVERRIDE
+ * flag set and will not be deleted below.
+ */
+ if (final_table != table) {
+ acpi_tb_delete_table(table_desc);
}
unmap_and_exit:
- acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header));
+
+ /* Always unmap the table header that we mapped above */
+
+ acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
index d42ede52..6848499 100644
--- a/drivers/acpi/acpica/utdecode.c
+++ b/drivers/acpi/acpica/utdecode.c
@@ -497,19 +497,20 @@
/* Names for Notify() values, used for debug output */
-static const char *acpi_gbl_notify_value_names[] = {
- "Bus Check",
- "Device Check",
- "Device Wake",
- "Eject Request",
- "Device Check Light",
- "Frequency Mismatch",
- "Bus Mode Mismatch",
- "Power Fault",
- "Capabilities Check",
- "Device PLD Check",
- "Reserved",
- "System Locality Update"
+static const char *acpi_gbl_notify_value_names[ACPI_NOTIFY_MAX + 1] = {
+ /* 00 */ "Bus Check",
+ /* 01 */ "Device Check",
+ /* 02 */ "Device Wake",
+ /* 03 */ "Eject Request",
+ /* 04 */ "Device Check Light",
+ /* 05 */ "Frequency Mismatch",
+ /* 06 */ "Bus Mode Mismatch",
+ /* 07 */ "Power Fault",
+ /* 08 */ "Capabilities Check",
+ /* 09 */ "Device PLD Check",
+ /* 10 */ "Reserved",
+ /* 11 */ "System Locality Update",
+ /* 12 */ "Shutdown Request"
};
const char *acpi_ut_get_notify_name(u32 notify_value)
@@ -519,9 +520,10 @@
return (acpi_gbl_notify_value_names[notify_value]);
} else if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
return ("Reserved");
- } else { /* Greater or equal to 0x80 */
-
- return ("**Device Specific**");
+ } else if (notify_value <= ACPI_MAX_DEVICE_SPECIFIC_NOTIFY) {
+ return ("Device Specific");
+ } else {
+ return ("Hardware Specific");
}
}
#endif
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index 4153584..90f53b4 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -140,6 +140,7 @@
{NULL, ACPI_TYPE_ANY, NULL}
};
+#if (!ACPI_REDUCED_HARDWARE)
/******************************************************************************
*
* Event and Hardware globals
@@ -236,6 +237,7 @@
ACPI_BITMASK_RT_CLOCK_STATUS,
ACPI_BITMASK_RT_CLOCK_ENABLE},
};
+#endif /* !ACPI_REDUCED_HARDWARE */
/*******************************************************************************
*
@@ -286,6 +288,8 @@
acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000;
+#if (!ACPI_REDUCED_HARDWARE)
+
/* GPE support */
acpi_gbl_gpe_xrupt_list_head = NULL;
@@ -294,6 +298,10 @@
acpi_current_gpe_count = 0;
acpi_gbl_all_gpes_initialized = FALSE;
+ acpi_gbl_global_event_handler = NULL;
+
+#endif /* !ACPI_REDUCED_HARDWARE */
+
/* Global handlers */
acpi_gbl_system_notify.handler = NULL;
@@ -302,7 +310,6 @@
acpi_gbl_init_handler = NULL;
acpi_gbl_table_handler = NULL;
acpi_gbl_interface_handler = NULL;
- acpi_gbl_global_event_handler = NULL;
/* Global Lock support */
diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c
index 8359c0c..246798e 100644
--- a/drivers/acpi/acpica/utinit.c
+++ b/drivers/acpi/acpica/utinit.c
@@ -53,27 +53,35 @@
/* Local prototypes */
static void acpi_ut_terminate(void);
+#if (!ACPI_REDUCED_HARDWARE)
+
+static void acpi_ut_free_gpe_lists(void);
+
+#else
+
+#define acpi_ut_free_gpe_lists()
+#endif /* !ACPI_REDUCED_HARDWARE */
+
+#if (!ACPI_REDUCED_HARDWARE)
/******************************************************************************
*
- * FUNCTION: acpi_ut_terminate
+ * FUNCTION: acpi_ut_free_gpe_lists
*
* PARAMETERS: none
*
* RETURN: none
*
- * DESCRIPTION: Free global memory
+ * DESCRIPTION: Free global GPE lists
*
******************************************************************************/
-static void acpi_ut_terminate(void)
+static void acpi_ut_free_gpe_lists(void)
{
struct acpi_gpe_block_info *gpe_block;
struct acpi_gpe_block_info *next_gpe_block;
struct acpi_gpe_xrupt_info *gpe_xrupt_info;
struct acpi_gpe_xrupt_info *next_gpe_xrupt_info;
- ACPI_FUNCTION_TRACE(ut_terminate);
-
/* Free global GPE blocks and related info structures */
gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
@@ -91,7 +99,26 @@
ACPI_FREE(gpe_xrupt_info);
gpe_xrupt_info = next_gpe_xrupt_info;
}
+}
+#endif /* !ACPI_REDUCED_HARDWARE */
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ut_terminate
+ *
+ * PARAMETERS: none
+ *
+ * RETURN: none
+ *
+ * DESCRIPTION: Free global memory
+ *
+ ******************************************************************************/
+
+static void acpi_ut_terminate(void)
+{
+ ACPI_FUNCTION_TRACE(ut_terminate);
+
+ acpi_ut_free_gpe_lists();
acpi_ut_delete_address_lists();
return_VOID;
}
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index 644e8c8..afa94f5 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -145,6 +145,8 @@
ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
+#if (!ACPI_REDUCED_HARDWARE)
+
/* Enable ACPI mode */
if (!(flags & ACPI_NO_ACPI_ENABLE)) {
@@ -169,6 +171,7 @@
ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
return_ACPI_STATUS(status);
}
+#endif /* !ACPI_REDUCED_HARDWARE */
/*
* Install the default op_region handlers. These are installed unless
@@ -184,7 +187,7 @@
return_ACPI_STATUS(status);
}
}
-
+#if (!ACPI_REDUCED_HARDWARE)
/*
* Initialize ACPI Event handling (Fixed and General Purpose)
*
@@ -220,6 +223,7 @@
return_ACPI_STATUS(status);
}
}
+#endif /* !ACPI_REDUCED_HARDWARE */
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index e5d53b7..ca77368 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -605,7 +605,7 @@
*val = 0;
switch(reg->space_id) {
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- status = acpi_os_read_memory64((acpi_physical_address)
+ status = acpi_os_read_memory((acpi_physical_address)
address, val, reg->bit_width);
if (ACPI_FAILURE(status))
return -EIO;
@@ -636,7 +636,7 @@
switch (reg->space_id) {
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- status = acpi_os_write_memory64((acpi_physical_address)
+ status = acpi_os_write_memory((acpi_physical_address)
address, val, reg->bit_width);
if (ACPI_FAILURE(status))
return -EIO;
diff --git a/drivers/acpi/bgrt.c b/drivers/acpi/bgrt.c
new file mode 100644
index 0000000..8cf6c46
--- /dev/null
+++ b/drivers/acpi/bgrt.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2012 Red Hat, Inc <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+
+static struct acpi_table_bgrt *bgrt_tab;
+static struct kobject *bgrt_kobj;
+
+struct bmp_header {
+ u16 id;
+ u32 size;
+} __attribute ((packed));
+
+static struct bmp_header bmp_header;
+
+static ssize_t show_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->version);
+}
+static DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
+
+static ssize_t show_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->status);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+static ssize_t show_type(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_type);
+}
+static DEVICE_ATTR(type, S_IRUGO, show_type, NULL);
+
+static ssize_t show_xoffset(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_x);
+}
+static DEVICE_ATTR(xoffset, S_IRUGO, show_xoffset, NULL);
+
+static ssize_t show_yoffset(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_y);
+}
+static DEVICE_ATTR(yoffset, S_IRUGO, show_yoffset, NULL);
+
+static ssize_t show_image(struct file *file, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+ int size = attr->size;
+ void __iomem *image = attr->private;
+
+ if (off >= size) {
+ count = 0;
+ } else {
+ if (off + count > size)
+ count = size - off;
+
+ memcpy_fromio(buf, image+off, count);
+ }
+
+ return count;
+}
+
+static struct bin_attribute image_attr = {
+ .attr = {
+ .name = "image",
+ .mode = S_IRUGO,
+ },
+ .read = show_image,
+};
+
+static struct attribute *bgrt_attributes[] = {
+ &dev_attr_version.attr,
+ &dev_attr_status.attr,
+ &dev_attr_type.attr,
+ &dev_attr_xoffset.attr,
+ &dev_attr_yoffset.attr,
+ NULL,
+};
+
+static struct attribute_group bgrt_attribute_group = {
+ .attrs = bgrt_attributes,
+};
+
+static int __init bgrt_init(void)
+{
+ acpi_status status;
+ int ret;
+ void __iomem *bgrt;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ status = acpi_get_table("BGRT", 0,
+ (struct acpi_table_header **)&bgrt_tab);
+
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ sysfs_bin_attr_init(&image_attr);
+
+ bgrt = ioremap(bgrt_tab->image_address, sizeof(struct bmp_header));
+
+ if (!bgrt) {
+ ret = -EINVAL;
+ goto out_err;
+ }
+
+ memcpy_fromio(&bmp_header, bgrt, sizeof(bmp_header));
+ image_attr.size = bmp_header.size;
+ iounmap(bgrt);
+
+ image_attr.private = ioremap(bgrt_tab->image_address, image_attr.size);
+
+ if (!image_attr.private) {
+ ret = -EINVAL;
+ goto out_err;
+ }
+
+
+ bgrt_kobj = kobject_create_and_add("bgrt", acpi_kobj);
+ if (!bgrt_kobj) {
+ ret = -EINVAL;
+ goto out_iounmap;
+ }
+
+ ret = sysfs_create_group(bgrt_kobj, &bgrt_attribute_group);
+ if (ret)
+ goto out_kobject;
+
+ ret = sysfs_create_bin_file(bgrt_kobj, &image_attr);
+ if (ret)
+ goto out_group;
+
+ return 0;
+
+out_group:
+ sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group);
+out_kobject:
+ kobject_put(bgrt_kobj);
+out_iounmap:
+ iounmap(image_attr.private);
+out_err:
+ return ret;
+}
+
+static void __exit bgrt_exit(void)
+{
+ iounmap(image_attr.private);
+ sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group);
+ sysfs_remove_bin_file(bgrt_kobj, &image_attr);
+}
+
+module_init(bgrt_init);
+module_exit(bgrt_exit);
+
+MODULE_AUTHOR("Matthew Garrett");
+MODULE_DESCRIPTION("BGRT boot graphic support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 9ecec98..3263b68 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -1010,6 +1010,7 @@
}
struct kobject *acpi_kobj;
+EXPORT_SYMBOL_GPL(acpi_kobj);
static int __init acpi_init(void)
{
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index b19a18d..3268dcf 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -812,10 +812,10 @@
first_ec = ec;
device->driver_data = ec;
- WARN(!request_region(ec->data_addr, 1, "EC data"),
- "Could not request EC data io port 0x%lx", ec->data_addr);
- WARN(!request_region(ec->command_addr, 1, "EC cmd"),
- "Could not request EC cmd io port 0x%lx", ec->command_addr);
+ ret = !!request_region(ec->data_addr, 1, "EC data");
+ WARN(!ret, "Could not request EC data io port 0x%lx", ec->data_addr);
+ ret = !!request_region(ec->command_addr, 1, "EC cmd");
+ WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr);
pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c
index 7a2035f..266bc58 100644
--- a/drivers/acpi/nvs.c
+++ b/drivers/acpi/nvs.c
@@ -95,8 +95,8 @@
{
struct nvs_page *entry, *next;
- pr_info("PM: Registering ACPI NVS region at %lx (%ld bytes)\n",
- start, size);
+ pr_info("PM: Registering ACPI NVS region [mem %#010lx-%#010lx] (%ld bytes)\n",
+ start, start + size - 1, size);
while (size > 0) {
unsigned int nr_bytes;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 412a1e0..9fddb55 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -347,7 +347,7 @@
unsigned long pfn;
pfn = pg_off >> PAGE_SHIFT;
- if (page_is_ram(pfn))
+ if (should_use_kmap(pfn))
kunmap(pfn_to_page(pfn));
else
iounmap(vaddr);
@@ -554,6 +554,15 @@
return AE_OK;
}
+acpi_status
+acpi_os_physical_table_override(struct acpi_table_header *existing_table,
+ acpi_physical_address * new_address,
+ u32 *new_table_length)
+{
+ return AE_SUPPORT;
+}
+
+
static irqreturn_t acpi_irq(int irq, void *dev_id)
{
u32 handled;
@@ -595,7 +604,8 @@
acpi_irq_handler = handler;
acpi_irq_context = context;
- if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
+ if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi",
+ acpi_irq)) {
printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
acpi_irq_handler = NULL;
return AE_NOT_ACQUIRED;
@@ -699,49 +709,6 @@
EXPORT_SYMBOL(acpi_os_write_port);
-acpi_status
-acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width)
-{
- void __iomem *virt_addr;
- unsigned int size = width / 8;
- bool unmap = false;
- u32 dummy;
-
- rcu_read_lock();
- virt_addr = acpi_map_vaddr_lookup(phys_addr, size);
- if (!virt_addr) {
- rcu_read_unlock();
- virt_addr = acpi_os_ioremap(phys_addr, size);
- if (!virt_addr)
- return AE_BAD_ADDRESS;
- unmap = true;
- }
-
- if (!value)
- value = &dummy;
-
- switch (width) {
- case 8:
- *(u8 *) value = readb(virt_addr);
- break;
- case 16:
- *(u16 *) value = readw(virt_addr);
- break;
- case 32:
- *(u32 *) value = readl(virt_addr);
- break;
- default:
- BUG();
- }
-
- if (unmap)
- iounmap(virt_addr);
- else
- rcu_read_unlock();
-
- return AE_OK;
-}
-
#ifdef readq
static inline u64 read64(const volatile void __iomem *addr)
{
@@ -758,7 +725,7 @@
#endif
acpi_status
-acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width)
+acpi_os_read_memory(acpi_physical_address phys_addr, u64 *value, u32 width)
{
void __iomem *virt_addr;
unsigned int size = width / 8;
@@ -803,45 +770,6 @@
return AE_OK;
}
-acpi_status
-acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width)
-{
- void __iomem *virt_addr;
- unsigned int size = width / 8;
- bool unmap = false;
-
- rcu_read_lock();
- virt_addr = acpi_map_vaddr_lookup(phys_addr, size);
- if (!virt_addr) {
- rcu_read_unlock();
- virt_addr = acpi_os_ioremap(phys_addr, size);
- if (!virt_addr)
- return AE_BAD_ADDRESS;
- unmap = true;
- }
-
- switch (width) {
- case 8:
- writeb(value, virt_addr);
- break;
- case 16:
- writew(value, virt_addr);
- break;
- case 32:
- writel(value, virt_addr);
- break;
- default:
- BUG();
- }
-
- if (unmap)
- iounmap(virt_addr);
- else
- rcu_read_unlock();
-
- return AE_OK;
-}
-
#ifdef writeq
static inline void write64(u64 val, volatile void __iomem *addr)
{
@@ -856,7 +784,7 @@
#endif
acpi_status
-acpi_os_write_memory64(acpi_physical_address phys_addr, u64 value, u32 width)
+acpi_os_write_memory(acpi_physical_address phys_addr, u64 value, u32 width)
{
void __iomem *virt_addr;
unsigned int size = width / 8;
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 8ae05ce..41de135 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -68,6 +68,7 @@
#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
#define ACPI_PROCESSOR_NOTIFY_POWER 0x81
#define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82
+#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007"
#define ACPI_PROCESSOR_LIMIT_USER 0
#define ACPI_PROCESSOR_LIMIT_THERMAL 1
@@ -88,7 +89,7 @@
static const struct acpi_device_id processor_device_ids[] = {
{ACPI_PROCESSOR_OBJECT_HID, 0},
- {"ACPI0007", 0},
+ {ACPI_PROCESSOR_DEVICE_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, processor_device_ids);
@@ -535,8 +536,8 @@
return -ENOMEM;
if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
- kfree(pr);
- return -ENOMEM;
+ result = -ENOMEM;
+ goto err_free_pr;
}
pr->handle = device->handle;
@@ -576,7 +577,7 @@
dev = get_cpu_device(pr->id);
if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) {
result = -EFAULT;
- goto err_free_cpumask;
+ goto err_clear_processor;
}
/*
@@ -594,9 +595,15 @@
err_remove_sysfs:
sysfs_remove_link(&device->dev.kobj, "sysdev");
+err_clear_processor:
+ /*
+ * processor_device_array is not cleared to allow checks for buggy BIOS
+ */
+ per_cpu(processors, pr->id) = NULL;
err_free_cpumask:
free_cpumask_var(pr->throttling.shared_cpu_map);
-
+err_free_pr:
+ kfree(pr);
return result;
}
@@ -741,20 +748,46 @@
return;
}
+static acpi_status is_processor_device(acpi_handle handle)
+{
+ struct acpi_device_info *info;
+ char *hid;
+ acpi_status status;
+
+ status = acpi_get_object_info(handle, &info);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ if (info->type == ACPI_TYPE_PROCESSOR) {
+ kfree(info);
+ return AE_OK; /* found a processor object */
+ }
+
+ if (!(info->valid & ACPI_VALID_HID)) {
+ kfree(info);
+ return AE_ERROR;
+ }
+
+ hid = info->hardware_id.string;
+ if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) {
+ kfree(info);
+ return AE_ERROR;
+ }
+
+ kfree(info);
+ return AE_OK; /* found a processor device object */
+}
+
static acpi_status
processor_walk_namespace_cb(acpi_handle handle,
u32 lvl, void *context, void **rv)
{
acpi_status status;
int *action = context;
- acpi_object_type type = 0;
- status = acpi_get_type(handle, &type);
+ status = is_processor_device(handle);
if (ACPI_FAILURE(status))
- return (AE_OK);
-
- if (type != ACPI_TYPE_PROCESSOR)
- return (AE_OK);
+ return AE_OK; /* not a processor; continue to walk */
switch (*action) {
case INSTALL_NOTIFY_HANDLER:
@@ -772,7 +805,8 @@
break;
}
- return (AE_OK);
+ /* found a processor; skip walking underneath */
+ return AE_CTRL_DEPTH;
}
static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr)
@@ -830,7 +864,7 @@
{
#ifdef CONFIG_ACPI_HOTPLUG_CPU
int action = INSTALL_NOTIFY_HANDLER;
- acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+ acpi_walk_namespace(ACPI_TYPE_ANY,
ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
processor_walk_namespace_cb, NULL, &action, NULL);
@@ -843,7 +877,7 @@
{
#ifdef CONFIG_ACPI_HOTPLUG_CPU
int action = UNINSTALL_NOTIFY_HANDLER;
- acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+ acpi_walk_namespace(ACPI_TYPE_ANY,
ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
processor_walk_namespace_cb, NULL, &action, NULL);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6b1d32a..b3447f6 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1190,8 +1190,7 @@
* to make the code that updates C-States be called once.
*/
- if (smp_processor_id() == 0 &&
- cpuidle_get_driver() == &acpi_idle_driver) {
+ if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
cpuidle_pause_and_lock();
/* Protect against cpu-hotplug */
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 3b599ab..641b545 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -57,6 +57,27 @@
static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg);
static unsigned int acpi_thermal_cpufreq_is_init = 0;
+#define reduction_pctg(cpu) \
+ per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu))
+
+/*
+ * Emulate "per package data" using per cpu data (which should really be
+ * provided elsewhere)
+ *
+ * Note we can lose a CPU on cpu hotunplug, in this case we forget the state
+ * temporarily. Fortunately that's not a big issue here (I hope)
+ */
+static int phys_package_first_cpu(int cpu)
+{
+ int i;
+ int id = topology_physical_package_id(cpu);
+
+ for_each_online_cpu(i)
+ if (topology_physical_package_id(i) == id)
+ return i;
+ return 0;
+}
+
static int cpu_has_cpufreq(unsigned int cpu)
{
struct cpufreq_policy policy;
@@ -76,7 +97,7 @@
max_freq = (
policy->cpuinfo.max_freq *
- (100 - per_cpu(cpufreq_thermal_reduction_pctg, policy->cpu) * 20)
+ (100 - reduction_pctg(policy->cpu) * 20)
) / 100;
cpufreq_verify_within_limits(policy, 0, max_freq);
@@ -102,16 +123,28 @@
if (!cpu_has_cpufreq(cpu))
return 0;
- return per_cpu(cpufreq_thermal_reduction_pctg, cpu);
+ return reduction_pctg(cpu);
}
static int cpufreq_set_cur_state(unsigned int cpu, int state)
{
+ int i;
+
if (!cpu_has_cpufreq(cpu))
return 0;
- per_cpu(cpufreq_thermal_reduction_pctg, cpu) = state;
- cpufreq_update_policy(cpu);
+ reduction_pctg(cpu) = state;
+
+ /*
+ * Update all the CPUs in the same package because they all
+ * contribute to the temperature and often share the same
+ * frequency.
+ */
+ for_each_online_cpu(i) {
+ if (topology_physical_package_id(i) ==
+ topology_physical_package_id(cpu))
+ cpufreq_update_policy(i);
+ }
return 0;
}
@@ -119,10 +152,6 @@
{
int i;
- for (i = 0; i < nr_cpu_ids; i++)
- if (cpu_present(i))
- per_cpu(cpufreq_thermal_reduction_pctg, i) = 0;
-
i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
if (!i)
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 605a295..1d02b7b 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -769,7 +769,7 @@
u64 *value)
{
u32 bit_width, bit_offset;
- u64 ptc_value;
+ u32 ptc_value;
u64 ptc_mask;
struct acpi_processor_throttling *throttling;
int ret = -1;
@@ -777,12 +777,11 @@
throttling = &pr->throttling;
switch (throttling->status_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
- ptc_value = 0;
bit_width = throttling->status_register.bit_width;
bit_offset = throttling->status_register.bit_offset;
acpi_os_read_port((acpi_io_address) throttling->status_register.
- address, (u32 *) &ptc_value,
+ address, &ptc_value,
(u32) (bit_width + bit_offset));
ptc_mask = (1 << bit_width) - 1;
*value = (u64) ((ptc_value >> bit_offset) & ptc_mask);
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index a6c77e8b..c1d6124 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -23,8 +23,7 @@
/* Is the reset register supported? The spec says we should be
* checking the bit width and bit offset, but Windows ignores
* these fields */
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER))
- return;
+ /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */
reset_value = acpi_gbl_FADT.reset_value;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 8ab80ba..5d24a17a 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -880,7 +880,6 @@
int j;
device->power.flags.power_resources = 1;
- ps->flags.valid = 1;
for (j = 0; j < ps->resources.count; j++)
acpi_bus_add_power_resource(ps->resources.handles[j]);
}
@@ -888,10 +887,8 @@
/* Evaluate "_PSx" to see if we can do explicit sets */
object_name[2] = 'S';
status = acpi_get_handle(device->handle, object_name, &handle);
- if (ACPI_SUCCESS(status)) {
+ if (ACPI_SUCCESS(status))
ps->flags.explicit_set = 1;
- ps->flags.valid = 1;
- }
/* State is valid if we have some power control */
if (ps->resources.count || ps->flags.explicit_set)
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index ca191ff..acf81fe 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -17,6 +17,7 @@
#include <linux/suspend.h>
#include <linux/reboot.h>
#include <linux/acpi.h>
+#include <linux/module.h>
#include <asm/io.h>
@@ -26,6 +27,24 @@
#include "internal.h"
#include "sleep.h"
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
+static u8 wake_sleep_flags(void)
+{
+ u8 flags = ACPI_NO_OPTIONAL_METHODS;
+
+ if (gts)
+ flags |= ACPI_EXECUTE_GTS;
+ if (bfs)
+ flags |= ACPI_EXECUTE_BFS;
+
+ return flags;
+}
+
static u8 sleep_states[ACPI_S_STATE_COUNT];
static void acpi_sleep_tts_switch(u32 acpi_state)
@@ -243,6 +262,7 @@
{
acpi_status status = AE_OK;
u32 acpi_state = acpi_target_sleep_state;
+ u8 flags = wake_sleep_flags();
int error;
ACPI_FLUSH_CPU_CACHE();
@@ -250,7 +270,7 @@
switch (acpi_state) {
case ACPI_STATE_S1:
barrier();
- status = acpi_enter_sleep_state(acpi_state);
+ status = acpi_enter_sleep_state(acpi_state, flags);
break;
case ACPI_STATE_S3:
@@ -265,7 +285,7 @@
acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
/* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(acpi_state);
+ acpi_leave_sleep_state_prep(acpi_state, flags);
/* ACPI 3.0 specs (P62) says that it's the responsibility
* of the OSPM to clear the status bit [ implying that the
@@ -529,27 +549,30 @@
static int acpi_hibernation_enter(void)
{
+ u8 flags = wake_sleep_flags();
acpi_status status = AE_OK;
ACPI_FLUSH_CPU_CACHE();
/* This shouldn't return. If it returns, we have a problem */
- status = acpi_enter_sleep_state(ACPI_STATE_S4);
+ status = acpi_enter_sleep_state(ACPI_STATE_S4, flags);
/* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4);
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
static void acpi_hibernation_leave(void)
{
+ u8 flags = wake_sleep_flags();
+
/*
* If ACPI is not enabled by the BIOS and the boot kernel, we need to
* enable it here.
*/
acpi_enable();
/* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4);
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
/* Check the hardware signature */
if (facs && s4_hardware_signature != facs->hardware_signature) {
printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
@@ -770,10 +793,12 @@
static void acpi_power_off(void)
{
+ u8 flags = wake_sleep_flags();
+
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk(KERN_DEBUG "%s called\n", __func__);
local_irq_disable();
- acpi_enter_sleep_state(ACPI_STATE_S5);
+ acpi_enter_sleep_state(ACPI_STATE_S5, flags);
}
/*
@@ -788,13 +813,13 @@
{
acpi_handle dummy;
- if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy)))
{
printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
"please notify linux-acpi@vger.kernel.org\n");
}
- if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy)))
{
printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 48fbc64..7dbebea 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -941,13 +941,13 @@
if (!tz)
return -EINVAL;
- /* Get temperature [_TMP] (required) */
- result = acpi_thermal_get_temperature(tz);
+ /* Get trip points [_CRT, _PSV, etc.] (required) */
+ result = acpi_thermal_get_trip_points(tz);
if (result)
return result;
- /* Get trip points [_CRT, _PSV, etc.] (required) */
- result = acpi_thermal_get_trip_points(tz);
+ /* Get temperature [_TMP] (required) */
+ result = acpi_thermal_get_temperature(tz);
if (result)
return result;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index eaef02a..9577b6f 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -548,27 +548,27 @@
* 1. The system BIOS should NOT automatically control the brightness
* level of the LCD when the power changes from AC to DC.
* Return Value:
- * -1 wrong arg.
+ * -EINVAL wrong arg.
*/
static int
acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag)
{
- u64 status = 0;
+ acpi_status status;
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
- if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) {
- status = -1;
- goto Failed;
- }
+ if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1)
+ return -EINVAL;
arg0.integer.value = (lcd_flag << 2) | bios_flag;
video->dos_setting = arg0.integer.value;
- acpi_evaluate_object(video->device->handle, "_DOS", &args, NULL);
+ status = acpi_evaluate_object(video->device->handle, "_DOS",
+ &args, NULL);
+ if (ACPI_FAILURE(status))
+ return -EIO;
- Failed:
- return status;
+ return 0;
}
/*
@@ -1343,15 +1343,17 @@
acpi_video_bus_get_devices(struct acpi_video_bus *video,
struct acpi_device *device)
{
- int status = 0;
+ int status;
struct acpi_device *dev;
- acpi_video_device_enumerate(video);
+ status = acpi_video_device_enumerate(video);
+ if (status)
+ return status;
list_for_each_entry(dev, &device->children, node) {
status = acpi_video_bus_get_one_device(dev, video);
- if (ACPI_FAILURE(status)) {
+ if (status) {
printk(KERN_WARNING PREFIX
"Can't attach device\n");
continue;
@@ -1653,15 +1655,20 @@
mutex_init(&video->device_list_lock);
INIT_LIST_HEAD(&video->video_device_list);
- acpi_video_bus_get_devices(video, device);
- acpi_video_bus_start_devices(video);
+ error = acpi_video_bus_get_devices(video, device);
+ if (error)
+ goto err_free_video;
video->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
- goto err_stop_video;
+ goto err_put_video;
}
+ error = acpi_video_bus_start_devices(video);
+ if (error)
+ goto err_free_input_dev;
+
snprintf(video->phys, sizeof(video->phys),
"%s/video/input0", acpi_device_hid(video->device));
@@ -1682,7 +1689,7 @@
error = input_register_device(input);
if (error)
- goto err_free_input_dev;
+ goto err_stop_video;
printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n",
ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
@@ -1692,14 +1699,19 @@
video->pm_nb.notifier_call = acpi_video_resume;
video->pm_nb.priority = 0;
- register_pm_notifier(&video->pm_nb);
+ error = register_pm_notifier(&video->pm_nb);
+ if (error)
+ goto err_unregister_input_dev;
return 0;
- err_free_input_dev:
- input_free_device(input);
+ err_unregister_input_dev:
+ input_unregister_device(input);
err_stop_video:
acpi_video_bus_stop_devices(video);
+ err_free_input_dev:
+ input_free_device(input);
+ err_put_video:
acpi_video_bus_put_devices(video);
kfree(video->attached_array);
err_free_video:
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index 88a98cf..f7ba316e 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -609,25 +609,16 @@
bool ret = false;
u32 temp_limit;
u32 avg_power;
- const char *msg = "MCP limit exceeded: ";
spin_lock_irqsave(&ips->turbo_status_lock, flags);
temp_limit = ips->mcp_temp_limit * 100;
- if (ips->mcp_avg_temp > temp_limit) {
- dev_info(&ips->dev->dev,
- "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp,
- temp_limit);
+ if (ips->mcp_avg_temp > temp_limit)
ret = true;
- }
avg_power = ips->cpu_avg_power + ips->mch_avg_power;
- if (avg_power > ips->mcp_power_limit) {
- dev_info(&ips->dev->dev,
- "%sAvg power %u, limit %u\n", msg, avg_power,
- ips->mcp_power_limit);
+ if (avg_power > ips->mcp_power_limit)
ret = true;
- }
spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index b00c176..d21e8f5 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -321,9 +321,14 @@
{
struct acpi_device *acpi = to_acpi_device(dev);
struct pnp_dev *pnp = _pnp;
+ struct device *physical_device;
+
+ physical_device = acpi_get_physical_device(acpi->handle);
+ if (physical_device)
+ put_device(physical_device);
/* true means it matched */
- return !acpi_get_physical_device(acpi->handle)
+ return !physical_device
&& compare_pnp_id(pnp->id, acpi_device_hid(acpi));
}
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f7f71b2..514a691 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -18,3 +18,11 @@
depends on THERMAL
depends on HWMON=y || HWMON=THERMAL
default y
+
+config SPEAR_THERMAL
+ bool "SPEAr thermal sensor driver"
+ depends on THERMAL
+ depends on PLAT_SPEAR
+ help
+ Enable this to plug the SPEAr thermal sensor driver into the Linux
+ thermal framework
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 31108a0..a9fff0b 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_THERMAL) += thermal_sys.o
+obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
\ No newline at end of file
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
new file mode 100644
index 0000000..c2e32df
--- /dev/null
+++ b/drivers/thermal/spear_thermal.c
@@ -0,0 +1,206 @@
+/*
+ * SPEAr thermal driver.
+ *
+ * Copyright (C) 2011-2012 ST Microelectronics
+ * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/spear_thermal.h>
+#include <linux/thermal.h>
+
+#define MD_FACTOR 1000
+
+/* SPEAr Thermal Sensor Dev Structure */
+struct spear_thermal_dev {
+ /* pointer to base address of the thermal sensor */
+ void __iomem *thermal_base;
+ /* clk structure */
+ struct clk *clk;
+ /* pointer to thermal flags */
+ unsigned int flags;
+};
+
+static inline int thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ struct spear_thermal_dev *stdev = thermal->devdata;
+
+ /*
+ * Data are ready to be read after 628 usec from POWERDOWN signal
+ * (PDN) = 1
+ */
+ *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR;
+ return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+ .get_temp = thermal_get_temp,
+};
+
+#ifdef CONFIG_PM
+static int spear_thermal_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
+ struct spear_thermal_dev *stdev = spear_thermal->devdata;
+ unsigned int actual_mask = 0;
+
+ /* Disable SPEAr Thermal Sensor */
+ actual_mask = readl_relaxed(stdev->thermal_base);
+ writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
+
+ clk_disable(stdev->clk);
+ dev_info(dev, "Suspended.\n");
+
+ return 0;
+}
+
+static int spear_thermal_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
+ struct spear_thermal_dev *stdev = spear_thermal->devdata;
+ unsigned int actual_mask = 0;
+ int ret = 0;
+
+ ret = clk_enable(stdev->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't enable clock\n");
+ return ret;
+ }
+
+ /* Enable SPEAr Thermal Sensor */
+ actual_mask = readl_relaxed(stdev->thermal_base);
+ writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base);
+
+ dev_info(dev, "Resumed.\n");
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend,
+ spear_thermal_resume);
+
+static int spear_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *spear_thermal = NULL;
+ struct spear_thermal_dev *stdev;
+ struct spear_thermal_pdata *pdata;
+ int ret = 0;
+ struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!stres) {
+ dev_err(&pdev->dev, "memory resource missing\n");
+ return -ENODEV;
+ }
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data is NULL\n");
+ return -EINVAL;
+ }
+
+ stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
+ if (!stdev) {
+ dev_err(&pdev->dev, "kzalloc fail\n");
+ return -ENOMEM;
+ }
+
+ /* Enable thermal sensor */
+ stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start,
+ resource_size(stres));
+ if (!stdev->thermal_base) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ return -ENOMEM;
+ }
+
+ stdev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(stdev->clk)) {
+ dev_err(&pdev->dev, "Can't get clock\n");
+ return PTR_ERR(stdev->clk);
+ }
+
+ ret = clk_enable(stdev->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't enable clock\n");
+ goto put_clk;
+ }
+
+ stdev->flags = pdata->thermal_flags;
+ writel_relaxed(stdev->flags, stdev->thermal_base);
+
+ spear_thermal = thermal_zone_device_register("spear_thermal", 0,
+ stdev, &ops, 0, 0, 0, 0);
+ if (IS_ERR(spear_thermal)) {
+ dev_err(&pdev->dev, "thermal zone device is NULL\n");
+ ret = PTR_ERR(spear_thermal);
+ goto disable_clk;
+ }
+
+ platform_set_drvdata(pdev, spear_thermal);
+
+ dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n",
+ stdev->thermal_base);
+
+ return 0;
+
+disable_clk:
+ clk_disable(stdev->clk);
+put_clk:
+ clk_put(stdev->clk);
+
+ return ret;
+}
+
+static int spear_thermal_exit(struct platform_device *pdev)
+{
+ unsigned int actual_mask = 0;
+ struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
+ struct spear_thermal_dev *stdev = spear_thermal->devdata;
+
+ thermal_zone_device_unregister(spear_thermal);
+ platform_set_drvdata(pdev, NULL);
+
+ /* Disable SPEAr Thermal Sensor */
+ actual_mask = readl_relaxed(stdev->thermal_base);
+ writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
+
+ clk_disable(stdev->clk);
+ clk_put(stdev->clk);
+
+ return 0;
+}
+
+static struct platform_driver spear_thermal_driver = {
+ .probe = spear_thermal_probe,
+ .remove = spear_thermal_exit,
+ .driver = {
+ .name = "spear_thermal",
+ .owner = THIS_MODULE,
+ .pm = &spear_thermal_pm_ops,
+ },
+};
+
+module_platform_driver(spear_thermal_driver);
+
+MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@st.com>");
+MODULE_DESCRIPTION("SPEAr thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 220ce7e..022bacb 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -23,6 +23,8 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
@@ -39,8 +41,6 @@
MODULE_DESCRIPTION("Generic thermal management sysfs support");
MODULE_LICENSE("GPL");
-#define PREFIX "Thermal: "
-
struct thermal_cooling_device_instance {
int id;
char name[THERMAL_NAME_LENGTH];
@@ -60,13 +60,11 @@
static LIST_HEAD(thermal_cdev_list);
static DEFINE_MUTEX(thermal_list_lock);
-static unsigned int thermal_event_seqnum;
-
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int err;
- again:
+again:
if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0))
return -ENOMEM;
@@ -152,9 +150,9 @@
if (!tz->ops->set_mode)
return -EPERM;
- if (!strncmp(buf, "enabled", sizeof("enabled")))
+ if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
- else if (!strncmp(buf, "disabled", sizeof("disabled")))
+ else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
else
result = -EINVAL;
@@ -283,8 +281,7 @@
static DEVICE_ATTR(type, 0444, type_show, NULL);
static DEVICE_ATTR(temp, 0444, temp_show, NULL);
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
-static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \
- passive_store);
+static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
static struct device_attribute trip_point_attrs[] = {
__ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
@@ -313,22 +310,6 @@
__ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL),
};
-#define TRIP_POINT_ATTR_ADD(_dev, _index, result) \
-do { \
- result = device_create_file(_dev, \
- &trip_point_attrs[_index * 2]); \
- if (result) \
- break; \
- result = device_create_file(_dev, \
- &trip_point_attrs[_index * 2 + 1]); \
-} while (0)
-
-#define TRIP_POINT_ATTR_REMOVE(_dev, _index) \
-do { \
- device_remove_file(_dev, &trip_point_attrs[_index * 2]); \
- device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \
-} while (0)
-
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
@@ -835,15 +816,14 @@
return 0;
device_remove_file(&tz->device, &dev->attr);
- remove_symbol_link:
+remove_symbol_link:
sysfs_remove_link(&tz->device.kobj, dev->name);
- release_idr:
+release_idr:
release_idr(&tz->idr, &tz->lock, dev->id);
- free_mem:
+free_mem:
kfree(dev);
return result;
}
-
EXPORT_SYMBOL(thermal_zone_bind_cooling_device);
/**
@@ -873,14 +853,13 @@
return -ENODEV;
- unbind:
+unbind:
device_remove_file(&tz->device, &pos->attr);
sysfs_remove_link(&tz->device.kobj, pos->name);
release_idr(&tz->idr, &tz->lock, pos->id);
kfree(pos);
return 0;
}
-
EXPORT_SYMBOL(thermal_zone_unbind_cooling_device);
static void thermal_release(struct device *dev)
@@ -888,7 +867,8 @@
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
- if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) {
+ if (!strncmp(dev_name(dev), "thermal_zone",
+ sizeof("thermal_zone") - 1)) {
tz = to_thermal_zone(dev);
kfree(tz);
} else {
@@ -908,8 +888,9 @@
* @devdata: device private data.
* @ops: standard thermal cooling devices callbacks.
*/
-struct thermal_cooling_device *thermal_cooling_device_register(
- char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
+struct thermal_cooling_device *
+thermal_cooling_device_register(char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
{
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos;
@@ -974,12 +955,11 @@
if (!result)
return cdev;
- unregister:
+unregister:
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
device_unregister(&cdev->device);
return ERR_PTR(result);
}
-
EXPORT_SYMBOL(thermal_cooling_device_register);
/**
@@ -1024,7 +1004,6 @@
device_unregister(&cdev->device);
return;
}
-
EXPORT_SYMBOL(thermal_cooling_device_unregister);
/**
@@ -1044,8 +1023,7 @@
if (tz->ops->get_temp(tz, &temp)) {
/* get_temp failed - retry it later */
- printk(KERN_WARNING PREFIX "failed to read out thermal zone "
- "%d\n", tz->id);
+ pr_warn("failed to read out thermal zone %d\n", tz->id);
goto leave;
}
@@ -1060,9 +1038,8 @@
ret = tz->ops->notify(tz, count,
trip_type);
if (!ret) {
- printk(KERN_EMERG
- "Critical temperature reached (%ld C), shutting down.\n",
- temp/1000);
+ pr_emerg("Critical temperature reached (%ld C), shutting down\n",
+ temp/1000);
orderly_poweroff(true);
}
}
@@ -1100,7 +1077,7 @@
tz->last_temperature = temp;
- leave:
+leave:
if (tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay);
else if (tz->polling_delay)
@@ -1199,7 +1176,12 @@
}
for (count = 0; count < trips; count++) {
- TRIP_POINT_ATTR_ADD(&tz->device, count, result);
+ result = device_create_file(&tz->device,
+ &trip_point_attrs[count * 2]);
+ if (result)
+ break;
+ result = device_create_file(&tz->device,
+ &trip_point_attrs[count * 2 + 1]);
if (result)
goto unregister;
tz->ops->get_trip_type(tz, count, &trip_type);
@@ -1235,12 +1217,11 @@
if (!result)
return tz;
- unregister:
+unregister:
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
device_unregister(&tz->device);
return ERR_PTR(result);
}
-
EXPORT_SYMBOL(thermal_zone_device_register);
/**
@@ -1279,9 +1260,12 @@
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
- for (count = 0; count < tz->trips; count++)
- TRIP_POINT_ATTR_REMOVE(&tz->device, count);
-
+ for (count = 0; count < tz->trips; count++) {
+ device_remove_file(&tz->device,
+ &trip_point_attrs[count * 2]);
+ device_remove_file(&tz->device,
+ &trip_point_attrs[count * 2 + 1]);
+ }
thermal_remove_hwmon_sysfs(tz);
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
idr_destroy(&tz->idr);
@@ -1289,7 +1273,6 @@
device_unregister(&tz->device);
return;
}
-
EXPORT_SYMBOL(thermal_zone_device_unregister);
#ifdef CONFIG_NET
@@ -1312,10 +1295,11 @@
void *msg_header;
int size;
int result;
+ static unsigned int thermal_event_seqnum;
/* allocate memory */
- size = nla_total_size(sizeof(struct thermal_genl_event)) + \
- nla_total_size(0);
+ size = nla_total_size(sizeof(struct thermal_genl_event)) +
+ nla_total_size(0);
skb = genlmsg_new(size, GFP_ATOMIC);
if (!skb)
@@ -1331,8 +1315,8 @@
}
/* fill the data */
- attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, \
- sizeof(struct thermal_genl_event));
+ attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT,
+ sizeof(struct thermal_genl_event));
if (!attr) {
nlmsg_free(skb);
@@ -1359,7 +1343,7 @@
result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC);
if (result)
- printk(KERN_INFO "failed to send netlink event:%d", result);
+ pr_info("failed to send netlink event:%d\n", result);
return result;
}
diff --git a/drivers/acpi/acpica/acconfig.h b/include/acpi/acconfig.h
similarity index 92%
rename from drivers/acpi/acpica/acconfig.h
rename to include/acpi/acconfig.h
index 1f30af6..03f1485 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -85,6 +85,23 @@
*/
#define ACPI_CHECKSUM_ABORT FALSE
+/*
+ * Generate a version of ACPICA that only supports "reduced hardware"
+ * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized
+ * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware"
+ * model. In other words, no ACPI hardware is supported.
+ *
+ * If TRUE, this means no support for the following:
+ * PM Event and Control registers
+ * SCI interrupt (and handler)
+ * Fixed Events
+ * General Purpose Events (GPEs)
+ * Global Lock
+ * ACPI PM timer
+ * FACS table (Waking vectors and Global Lock)
+ */
+#define ACPI_REDUCED_HARDWARE FALSE
+
/******************************************************************************
*
* Subsystem Constants
@@ -93,7 +110,7 @@
/* Version of ACPI supported */
-#define ACPI_CA_SUPPORT_LEVEL 3
+#define ACPI_CA_SUPPORT_LEVEL 5
/* Maximum count for a semaphore object */
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 5b6c391..47b3902 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -89,8 +89,9 @@
#define AE_SAME_HANDLER (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL)
#define AE_NO_HANDLER (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL)
#define AE_OWNER_ID_LIMIT (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_CONFIGURED (acpi_status) (0x001C | AE_CODE_ENVIRONMENTAL)
-#define AE_CODE_ENV_MAX 0x001B
+#define AE_CODE_ENV_MAX 0x001C
/*
* Programmer exceptions
@@ -213,7 +214,8 @@
"AE_ABORT_METHOD",
"AE_SAME_HANDLER",
"AE_NO_HANDLER",
- "AE_OWNER_ID_LIMIT"
+ "AE_OWNER_ID_LIMIT",
+ "AE_NOT_CONFIGURED"
};
char const *acpi_gbl_exception_names_pgm[] = {
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index 5b5af0d..38f5088 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -46,6 +46,7 @@
/* Method names - these methods can appear anywhere in the namespace */
+#define METHOD_NAME__SB_ "_SB_"
#define METHOD_NAME__HID "_HID"
#define METHOD_NAME__CID "_CID"
#define METHOD_NAME__UID "_UID"
@@ -64,11 +65,11 @@
/* Method names - these methods must appear at the namespace root */
-#define METHOD_NAME__BFS "\\_BFS"
-#define METHOD_NAME__GTS "\\_GTS"
-#define METHOD_NAME__PTS "\\_PTS"
-#define METHOD_NAME__SST "\\_SI._SST"
-#define METHOD_NAME__WAK "\\_WAK"
+#define METHOD_PATHNAME__BFS "\\_BFS"
+#define METHOD_PATHNAME__GTS "\\_GTS"
+#define METHOD_PATHNAME__PTS "\\_PTS"
+#define METHOD_PATHNAME__SST "\\_SI._SST"
+#define METHOD_PATHNAME__WAK "\\_WAK"
/* Definitions of the predefined namespace names */
@@ -79,6 +80,5 @@
#define ACPI_PREFIX_LOWER (u32) 0x69706361 /* "acpi" */
#define ACPI_NS_ROOT_PATH "\\"
-#define ACPI_NS_SYSTEM_BUS "_SB_"
#endif /* __ACNAMES_H__ */
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 7c9aebe..21a5548 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -95,6 +95,11 @@
acpi_os_table_override(struct acpi_table_header *existing_table,
struct acpi_table_header **new_table);
+acpi_status
+acpi_os_physical_table_override(struct acpi_table_header *existing_table,
+ acpi_physical_address * new_address,
+ u32 *new_table_length);
+
/*
* Spinlock primitives
*/
@@ -217,14 +222,10 @@
* Platform and hardware-independent physical memory interfaces
*/
acpi_status
-acpi_os_read_memory(acpi_physical_address address, u32 * value, u32 width);
-acpi_status
-acpi_os_read_memory64(acpi_physical_address address, u64 *value, u32 width);
+acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width);
acpi_status
-acpi_os_write_memory(acpi_physical_address address, u32 value, u32 width);
-acpi_status
-acpi_os_write_memory64(acpi_physical_address address, u64 value, u32 width);
+acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width);
/*
* Platform and hardware-independent PCI configuration space access
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index a28da35..9821101 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,8 +47,9 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120111
+#define ACPI_CA_VERSION 0x20120320
+#include "acconfig.h"
#include "actypes.h"
#include "actbl.h"
@@ -71,6 +72,33 @@
extern u8 acpi_gbl_truncate_io_addresses;
extern u8 acpi_gbl_disable_auto_repair;
+/*
+ * Hardware-reduced prototypes. All interfaces that use these macros will
+ * be configured out of the ACPICA build if the ACPI_REDUCED_HARDWARE flag
+ * is set to TRUE.
+ */
+#if (!ACPI_REDUCED_HARDWARE)
+#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \
+ prototype;
+
+#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \
+ prototype;
+
+#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \
+ prototype;
+
+#else
+#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \
+ static ACPI_INLINE prototype {return(AE_NOT_CONFIGURED);}
+
+#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \
+ static ACPI_INLINE prototype {return(AE_OK);}
+
+#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \
+ static ACPI_INLINE prototype {}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
+
extern u32 acpi_current_gpe_count;
extern struct acpi_table_fadt acpi_gbl_FADT;
extern u8 acpi_gbl_system_awake_and_running;
@@ -96,9 +124,8 @@
acpi_status acpi_subsystem_status(void);
#endif
-acpi_status acpi_enable(void);
-
-acpi_status acpi_disable(void);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable(void))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable(void))
#ifdef ACPI_FUTURE_USAGE
acpi_status acpi_get_system_info(struct acpi_buffer *ret_buffer);
@@ -235,17 +262,34 @@
acpi_status
acpi_install_initialization_handler(acpi_init_handler handler, u32 function);
-acpi_status
-acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler,
- void *context);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_install_global_event_handler
+ (ACPI_GBL_EVENT_HANDLER handler, void *context))
-acpi_status
-acpi_install_fixed_event_handler(u32 acpi_event,
- acpi_event_handler handler, void *context);
-
-acpi_status
-acpi_remove_fixed_event_handler(u32 acpi_event, acpi_event_handler handler);
-
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_install_fixed_event_handler(u32
+ acpi_event,
+ acpi_event_handler
+ handler,
+ void
+ *context))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_remove_fixed_event_handler(u32 acpi_event,
+ acpi_event_handler
+ handler))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_install_gpe_handler(acpi_handle
+ gpe_device,
+ u32 gpe_number,
+ u32 type,
+ acpi_gpe_handler
+ address,
+ void *context))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_remove_gpe_handler(acpi_handle gpe_device,
+ u32 gpe_number,
+ acpi_gpe_handler
+ address))
acpi_status
acpi_install_notify_handler(acpi_handle device,
u32 handler_type,
@@ -266,15 +310,6 @@
acpi_adr_space_type space_id,
acpi_adr_space_handler handler);
-acpi_status
-acpi_install_gpe_handler(acpi_handle gpe_device,
- u32 gpe_number,
- u32 type, acpi_gpe_handler address, void *context);
-
-acpi_status
-acpi_remove_gpe_handler(acpi_handle gpe_device,
- u32 gpe_number, acpi_gpe_handler address);
-
#ifdef ACPI_FUTURE_USAGE
acpi_status acpi_install_exception_handler(acpi_exception_handler handler);
#endif
@@ -284,9 +319,11 @@
/*
* Global Lock interfaces
*/
-acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle);
-
-acpi_status acpi_release_global_lock(u32 handle);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_acquire_global_lock(u16 timeout,
+ u32 *handle))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_release_global_lock(u32 handle))
/*
* Interfaces to AML mutex objects
@@ -299,47 +336,75 @@
/*
* Fixed Event interfaces
*/
-acpi_status acpi_enable_event(u32 event, u32 flags);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_enable_event(u32 event, u32 flags))
-acpi_status acpi_disable_event(u32 event, u32 flags);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_disable_event(u32 event, u32 flags))
-acpi_status acpi_clear_event(u32 event);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_clear_event(u32 event))
-acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status);
-
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_get_event_status(u32 event,
+ acpi_event_status
+ *event_status))
/*
* General Purpose Event (GPE) Interfaces
*/
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_update_all_gpes(void))
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_enable_gpe(acpi_handle gpe_device,
+ u32 gpe_number))
-acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_disable_gpe(acpi_handle gpe_device,
+ u32 gpe_number))
-acpi_status
-acpi_setup_gpe_for_wake(acpi_handle parent_device,
- acpi_handle gpe_device, u32 gpe_number);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_clear_gpe(acpi_handle gpe_device,
+ u32 gpe_number))
-acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_set_gpe(acpi_handle gpe_device,
+ u32 gpe_number, u8 action))
-acpi_status
-acpi_get_gpe_status(acpi_handle gpe_device,
- u32 gpe_number, acpi_event_status *event_status);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_finish_gpe(acpi_handle gpe_device,
+ u32 gpe_number))
-acpi_status acpi_disable_all_gpes(void);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_setup_gpe_for_wake(acpi_handle
+ parent_device,
+ acpi_handle gpe_device,
+ u32 gpe_number))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_set_gpe_wake_mask(acpi_handle gpe_device,
+ u32 gpe_number,
+ u8 action))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_get_gpe_status(acpi_handle gpe_device,
+ u32 gpe_number,
+ acpi_event_status
+ *event_status))
-acpi_status acpi_enable_all_runtime_gpes(void);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable_all_gpes(void))
-acpi_status acpi_get_gpe_device(u32 gpe_index, acpi_handle *gpe_device);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_runtime_gpes(void))
-acpi_status
-acpi_install_gpe_block(acpi_handle gpe_device,
- struct acpi_generic_address *gpe_block_address,
- u32 register_count, u32 interrupt_number);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_get_gpe_device(u32 gpe_index,
+ acpi_handle * gpe_device))
-acpi_status acpi_remove_gpe_block(acpi_handle gpe_device);
-
-acpi_status acpi_update_all_gpes(void);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_install_gpe_block(acpi_handle gpe_device,
+ struct
+ acpi_generic_address
+ *gpe_block_address,
+ u32 register_count,
+ u32 interrupt_number))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_remove_gpe_block(acpi_handle gpe_device))
/*
* Resource interfaces
@@ -391,34 +456,60 @@
*/
acpi_status acpi_reset(void);
-acpi_status acpi_read_bit_register(u32 register_id, u32 *return_value);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_read_bit_register(u32 register_id,
+ u32 *return_value))
-acpi_status acpi_write_bit_register(u32 register_id, u32 value);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_write_bit_register(u32 register_id,
+ u32 value))
-acpi_status acpi_set_firmware_waking_vector(u32 physical_address);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_set_firmware_waking_vector(u32
+ physical_address))
#if ACPI_MACHINE_WIDTH == 64
-acpi_status acpi_set_firmware_waking_vector64(u64 physical_address);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_set_firmware_waking_vector64(u64
+ physical_address))
#endif
acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg);
acpi_status acpi_write(u64 value, struct acpi_generic_address *reg);
+/*
+ * Sleep/Wake interfaces
+ */
acpi_status
acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b);
acpi_status acpi_enter_sleep_state_prep(u8 sleep_state);
-acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state);
+acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags);
-acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void);
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void))
-acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags);
acpi_status acpi_leave_sleep_state(u8 sleep_state);
/*
+ * ACPI Timer interfaces
+ */
+#ifdef ACPI_FUTURE_USAGE
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_get_timer_resolution(u32 *resolution))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_get_timer(u32 *ticks))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+ acpi_get_timer_duration(u32 start_ticks,
+ u32 end_ticks,
+ u32 *time_elapsed))
+#endif /* ACPI_FUTURE_USAGE */
+
+/*
* Error/Warning output
*/
void ACPI_INTERNAL_VAR_XFACE
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 8e1b92f..8dea546 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -309,6 +309,13 @@
PM_TABLET = 8
};
+/* Values for sleep_status and sleep_control registers (V5 FADT) */
+
+#define ACPI_X_WAKE_STATUS 0x80
+#define ACPI_X_SLEEP_TYPE_MASK 0x1C
+#define ACPI_X_SLEEP_TYPE_POSITION 0x02
+#define ACPI_X_SLEEP_ENABLE 0x20
+
/* Reset to default packing */
#pragma pack()
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index d5dee7c..eba6604 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -518,6 +518,13 @@
#define ACPI_SLEEP_TYPE_INVALID 0xFF
/*
+ * Sleep/Wake flags
+ */
+#define ACPI_NO_OPTIONAL_METHODS 0x00 /* Do not execute any optional methods */
+#define ACPI_EXECUTE_GTS 0x01 /* For enter sleep interface */
+#define ACPI_EXECUTE_BFS 0x02 /* For leave sleep prep interface */
+
+/*
* Standard notify values
*/
#define ACPI_NOTIFY_BUS_CHECK (u8) 0x00
@@ -532,8 +539,9 @@
#define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09
#define ACPI_NOTIFY_RESERVED (u8) 0x0A
#define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B
+#define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C
-#define ACPI_NOTIFY_MAX 0x0B
+#define ACPI_NOTIFY_MAX 0x0C
/*
* Types associated with ACPI names and objects. The first group of
@@ -698,7 +706,8 @@
#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
-#define ACPI_MAX_SYS_NOTIFY 0x7f
+#define ACPI_MAX_SYS_NOTIFY 0x7F
+#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
/* Address Space (Operation Region) Types */
@@ -786,6 +795,15 @@
#define ACPI_ENABLE_EVENT 1
#define ACPI_DISABLE_EVENT 0
+/* Sleep function dispatch */
+
+typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state, u8 flags);
+
+struct acpi_sleep_functions {
+ ACPI_SLEEP_FUNCTION legacy_function;
+ ACPI_SLEEP_FUNCTION extended_function;
+};
+
/*
* External ACPI object definition
*/
diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h
new file mode 100644
index 0000000..724f2e1
--- /dev/null
+++ b/include/linux/platform_data/spear_thermal.h
@@ -0,0 +1,26 @@
+/*
+ * SPEAr thermal driver platform data.
+ *
+ * Copyright (C) 2011-2012 ST Microelectronics
+ * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef SPEAR_THERMAL_H
+#define SPEAR_THERMAL_H
+
+/* SPEAr Thermal Sensor Platform Data */
+struct spear_thermal_pdata {
+ /* flags used to enable thermal sensor */
+ unsigned int thermal_flags;
+};
+
+#endif /* SPEAR_THERMAL_H */
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 555c69a..adf175f 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -4,11 +4,13 @@
.SH SYNOPSIS
.ft B
.B turbostat
+.RB [ "\-s" ]
.RB [ "\-v" ]
.RB [ "\-M MSR#" ]
.RB command
.br
.B turbostat
+.RB [ "\-s" ]
.RB [ "\-v" ]
.RB [ "\-M MSR#" ]
.RB [ "\-i interval_sec" ]
@@ -25,6 +27,8 @@
on processors that additionally support C-state residency counters.
.SS Options
+The \fB-s\fP option prints only a 1-line summary for each sample interval.
+.PP
The \fB-v\fP option increases verbosity.
.PP
The \fB-M MSR#\fP option dumps the specified MSR,
@@ -39,13 +43,14 @@
.SH FIELD DESCRIPTIONS
.nf
\fBpk\fP processor package number.
-\fBcr\fP processor core number.
+\fBcor\fP processor core number.
\fBCPU\fP Linux CPU (logical processor) number.
+Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology.
\fB%c0\fP percent of the interval that the CPU retired instructions.
\fBGHz\fP average clock rate while the CPU was in c0 state.
\fBTSC\fP average GHz that the TSC ran during the entire interval.
-\fB%c1, %c3, %c6\fP show the percentage residency in hardware core idle states.
-\fB%pc3, %pc6\fP percentage residency in hardware package idle states.
+\fB%c1, %c3, %c6, %c7\fP show the percentage residency in hardware core idle states.
+\fB%pc2, %pc3, %pc6, %pc7\fP percentage residency in hardware package idle states.
.fi
.PP
.SH EXAMPLE
@@ -53,25 +58,37 @@
(override interval with "-i sec" option, or specify a command
for turbostat to fork).
-The first row of statistics reflect the average for the entire system.
+The first row of statistics is a summary for the entire system.
+Note that the summary is a weighted average.
Subsequent rows show per-CPU statistics.
.nf
[root@x980]# ./turbostat
-cr CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 0.04 1.62 3.38 0.11 0.00 99.85 0.00 95.07
- 0 0 0.04 1.62 3.38 0.06 0.00 99.90 0.00 95.07
- 0 6 0.02 1.62 3.38 0.08 0.00 99.90 0.00 95.07
- 1 2 0.10 1.62 3.38 0.29 0.00 99.61 0.00 95.07
- 1 8 0.11 1.62 3.38 0.28 0.00 99.61 0.00 95.07
- 2 4 0.01 1.62 3.38 0.01 0.00 99.98 0.00 95.07
- 2 10 0.01 1.61 3.38 0.02 0.00 99.98 0.00 95.07
- 8 1 0.07 1.62 3.38 0.15 0.00 99.78 0.00 95.07
- 8 7 0.03 1.62 3.38 0.19 0.00 99.78 0.00 95.07
- 9 3 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07
- 9 9 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07
- 10 5 0.01 1.62 3.38 0.13 0.00 99.86 0.00 95.07
- 10 11 0.08 1.62 3.38 0.05 0.00 99.86 0.00 95.07
+cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
+ 0.60 1.63 3.38 2.91 0.00 96.49 0.00 76.64
+ 0 0 0.59 1.62 3.38 4.51 0.00 94.90 0.00 76.64
+ 0 6 1.13 1.64 3.38 3.97 0.00 94.90 0.00 76.64
+ 1 2 0.08 1.62 3.38 0.07 0.00 99.85 0.00 76.64
+ 1 8 0.03 1.62 3.38 0.12 0.00 99.85 0.00 76.64
+ 2 4 0.01 1.62 3.38 0.06 0.00 99.93 0.00 76.64
+ 2 10 0.04 1.62 3.38 0.02 0.00 99.93 0.00 76.64
+ 8 1 2.85 1.62 3.38 11.71 0.00 85.44 0.00 76.64
+ 8 7 1.98 1.62 3.38 12.58 0.00 85.44 0.00 76.64
+ 9 3 0.36 1.62 3.38 0.71 0.00 98.93 0.00 76.64
+ 9 9 0.09 1.62 3.38 0.98 0.00 98.93 0.00 76.64
+ 10 5 0.03 1.62 3.38 0.09 0.00 99.87 0.00 76.64
+ 10 11 0.07 1.62 3.38 0.06 0.00 99.87 0.00 76.64
+.fi
+.SH SUMMARY EXAMPLE
+The "-s" option prints the column headers just once,
+and then the one line system summary for each sample interval.
+
+.nf
+[root@x980]# ./turbostat -s
+ %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
+ 0.61 1.89 3.38 5.95 0.00 93.44 0.00 66.33
+ 0.52 1.62 3.38 6.83 0.00 92.65 0.00 61.11
+ 0.62 1.92 3.38 5.47 0.00 93.91 0.00 67.31
.fi
.SH VERBOSE EXAMPLE
The "-v" option adds verbosity to the output:
@@ -101,33 +118,33 @@
.nf
[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
-
-^Ccr CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 8.49 3.63 3.38 16.23 0.66 74.63 0.00 0.00
- 0 0 1.22 3.62 3.38 32.18 0.00 66.60 0.00 0.00
- 0 6 0.40 3.61 3.38 33.00 0.00 66.60 0.00 0.00
- 1 2 0.11 3.14 3.38 0.19 3.95 95.75 0.00 0.00
- 1 8 0.05 2.88 3.38 0.25 3.95 95.75 0.00 0.00
- 2 4 0.00 3.13 3.38 0.02 0.00 99.98 0.00 0.00
- 2 10 0.00 3.09 3.38 0.02 0.00 99.98 0.00 0.00
- 8 1 0.04 3.50 3.38 14.43 0.00 85.54 0.00 0.00
- 8 7 0.03 2.98 3.38 14.43 0.00 85.54 0.00 0.00
- 9 3 0.00 3.16 3.38 100.00 0.00 0.00 0.00 0.00
- 9 9 99.93 3.63 3.38 0.06 0.00 0.00 0.00 0.00
- 10 5 0.01 2.82 3.38 0.08 0.00 99.91 0.00 0.00
- 10 11 0.02 3.36 3.38 0.06 0.00 99.91 0.00 0.00
-6.950866 sec
+^C
+cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
+ 8.63 3.64 3.38 14.46 0.49 76.42 0.00 0.00
+ 0 0 0.34 3.36 3.38 99.66 0.00 0.00 0.00 0.00
+ 0 6 99.96 3.64 3.38 0.04 0.00 0.00 0.00 0.00
+ 1 2 0.14 3.50 3.38 1.75 2.04 96.07 0.00 0.00
+ 1 8 0.38 3.57 3.38 1.51 2.04 96.07 0.00 0.00
+ 2 4 0.01 2.65 3.38 0.06 0.00 99.93 0.00 0.00
+ 2 10 0.03 2.12 3.38 0.04 0.00 99.93 0.00 0.00
+ 8 1 0.91 3.59 3.38 35.27 0.92 62.90 0.00 0.00
+ 8 7 1.61 3.63 3.38 34.57 0.92 62.90 0.00 0.00
+ 9 3 0.04 3.38 3.38 0.20 0.00 99.76 0.00 0.00
+ 9 9 0.04 3.29 3.38 0.20 0.00 99.76 0.00 0.00
+ 10 5 0.03 3.08 3.38 0.12 0.00 99.85 0.00 0.00
+ 10 11 0.05 3.07 3.38 0.10 0.00 99.85 0.00 0.00
+4.907015 sec
.fi
-Above the cycle soaker drives cpu9 up 3.6 Ghz turbo limit
+Above the cycle soaker drives cpu6 up 3.6 Ghz turbo limit
while the other processors are generally in various states of idle.
-Note that cpu3 is an HT sibling sharing core9
-with cpu9, and thus it is unable to get to an idle state
-deeper than c1 while cpu9 is busy.
+Note that cpu0 is an HT sibling sharing core0
+with cpu6, and thus it is unable to get to an idle state
+deeper than c1 while cpu6 is busy.
-Note that turbostat reports average GHz of 3.61, while
-the arithmetic average of the GHz column above is 3.24.
+Note that turbostat reports average GHz of 3.64, while
+the arithmetic average of the GHz column above is lower.
This is a weighted average, where the weight is %c0. ie. it is the total number of
un-halted cycles elapsed per time divided by the number of CPUs.
.SH NOTES
@@ -167,6 +184,6 @@
.SH "SEE ALSO"
msr(4), vmstat(8)
.PP
-.SH AUTHORS
+.SH AUTHOR
.nf
Written by Len Brown <len.brown@intel.com>
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 310d3dd..ab2f682 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -2,7 +2,7 @@
* turbostat -- show CPU frequency and C-state residency
* on modern Intel turbo-capable processors.
*
- * Copyright (c) 2010, Intel Corporation.
+ * Copyright (c) 2012 Intel Corporation.
* Len Brown <len.brown@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
@@ -19,6 +19,7 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#define _GNU_SOURCE
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
@@ -32,6 +33,7 @@
#include <dirent.h>
#include <string.h>
#include <ctype.h>
+#include <sched.h>
#define MSR_TSC 0x10
#define MSR_NEHALEM_PLATFORM_INFO 0xCE
@@ -49,6 +51,7 @@
char *proc_stat = "/proc/stat";
unsigned int interval_sec = 5; /* set with -i interval_sec */
unsigned int verbose; /* set with -v */
+unsigned int summary_only; /* set with -s */
unsigned int skip_c0;
unsigned int skip_c1;
unsigned int do_nhm_cstates;
@@ -68,9 +71,10 @@
int aperf_mperf_unstable;
int backwards_count;
char *progname;
-int need_reinitialize;
int num_cpus;
+cpu_set_t *cpu_mask;
+size_t cpu_mask_size;
struct counters {
unsigned long long tsc; /* per thread */
@@ -99,44 +103,76 @@
struct timeval tv_odd;
struct timeval tv_delta;
-unsigned long long get_msr(int cpu, off_t offset)
+/*
+ * cpu_mask_init(ncpus)
+ *
+ * allocate and clear cpu_mask
+ * set cpu_mask_size
+ */
+void cpu_mask_init(int ncpus)
+{
+ cpu_mask = CPU_ALLOC(ncpus);
+ if (cpu_mask == NULL) {
+ perror("CPU_ALLOC");
+ exit(3);
+ }
+ cpu_mask_size = CPU_ALLOC_SIZE(ncpus);
+ CPU_ZERO_S(cpu_mask_size, cpu_mask);
+}
+
+void cpu_mask_uninit()
+{
+ CPU_FREE(cpu_mask);
+ cpu_mask = NULL;
+ cpu_mask_size = 0;
+}
+
+int cpu_migrate(int cpu)
+{
+ CPU_ZERO_S(cpu_mask_size, cpu_mask);
+ CPU_SET_S(cpu, cpu_mask_size, cpu_mask);
+ if (sched_setaffinity(0, cpu_mask_size, cpu_mask) == -1)
+ return -1;
+ else
+ return 0;
+}
+
+int get_msr(int cpu, off_t offset, unsigned long long *msr)
{
ssize_t retval;
- unsigned long long msr;
char pathname[32];
int fd;
sprintf(pathname, "/dev/cpu/%d/msr", cpu);
fd = open(pathname, O_RDONLY);
- if (fd < 0) {
- perror(pathname);
- need_reinitialize = 1;
- return 0;
- }
+ if (fd < 0)
+ return -1;
- retval = pread(fd, &msr, sizeof msr, offset);
- if (retval != sizeof msr) {
- fprintf(stderr, "cpu%d pread(..., 0x%zx) = %jd\n",
- cpu, offset, retval);
- exit(-2);
- }
-
+ retval = pread(fd, msr, sizeof *msr, offset);
close(fd);
- return msr;
+
+ if (retval != sizeof *msr)
+ return -1;
+
+ return 0;
}
void print_header(void)
{
if (show_pkg)
fprintf(stderr, "pk");
+ if (show_pkg)
+ fprintf(stderr, " ");
if (show_core)
- fprintf(stderr, " cr");
+ fprintf(stderr, "cor");
if (show_cpu)
fprintf(stderr, " CPU");
+ if (show_pkg || show_core || show_cpu)
+ fprintf(stderr, " ");
if (do_nhm_cstates)
- fprintf(stderr, " %%c0 ");
+ fprintf(stderr, " %%c0");
if (has_aperf)
- fprintf(stderr, " GHz");
+ fprintf(stderr, " GHz");
fprintf(stderr, " TSC");
if (do_nhm_cstates)
fprintf(stderr, " %%c1");
@@ -147,13 +183,13 @@
if (do_snb_cstates)
fprintf(stderr, " %%c7");
if (do_snb_cstates)
- fprintf(stderr, " %%pc2");
+ fprintf(stderr, " %%pc2");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc3");
+ fprintf(stderr, " %%pc3");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc6");
+ fprintf(stderr, " %%pc6");
if (do_snb_cstates)
- fprintf(stderr, " %%pc7");
+ fprintf(stderr, " %%pc7");
if (extra_msr_offset)
fprintf(stderr, " MSR 0x%x ", extra_msr_offset);
@@ -187,6 +223,15 @@
dump_cnt(cnt);
}
+/*
+ * column formatting convention & formats
+ * package: "pk" 2 columns %2d
+ * core: "cor" 3 columns %3d
+ * CPU: "CPU" 3 columns %3d
+ * GHz: "GHz" 3 columns %3.2
+ * TSC: "TSC" 3 columns %3.2
+ * percentage " %pc3" %6.2
+ */
void print_cnt(struct counters *p)
{
double interval_float;
@@ -196,39 +241,45 @@
/* topology columns, print blanks on 1st (average) line */
if (p == cnt_average) {
if (show_pkg)
+ fprintf(stderr, " ");
+ if (show_pkg && show_core)
fprintf(stderr, " ");
if (show_core)
- fprintf(stderr, " ");
+ fprintf(stderr, " ");
if (show_cpu)
- fprintf(stderr, " ");
+ fprintf(stderr, " " " ");
} else {
if (show_pkg)
- fprintf(stderr, "%d", p->pkg);
+ fprintf(stderr, "%2d", p->pkg);
+ if (show_pkg && show_core)
+ fprintf(stderr, " ");
if (show_core)
- fprintf(stderr, "%4d", p->core);
+ fprintf(stderr, "%3d", p->core);
if (show_cpu)
- fprintf(stderr, "%4d", p->cpu);
+ fprintf(stderr, " %3d", p->cpu);
}
/* %c0 */
if (do_nhm_cstates) {
+ if (show_pkg || show_core || show_cpu)
+ fprintf(stderr, " ");
if (!skip_c0)
- fprintf(stderr, "%7.2f", 100.0 * p->mperf/p->tsc);
+ fprintf(stderr, "%6.2f", 100.0 * p->mperf/p->tsc);
else
- fprintf(stderr, " ****");
+ fprintf(stderr, " ****");
}
/* GHz */
if (has_aperf) {
if (!aperf_mperf_unstable) {
- fprintf(stderr, "%5.2f",
+ fprintf(stderr, " %3.2f",
1.0 * p->tsc / units * p->aperf /
p->mperf / interval_float);
} else {
if (p->aperf > p->tsc || p->mperf > p->tsc) {
- fprintf(stderr, " ****");
+ fprintf(stderr, " ***");
} else {
- fprintf(stderr, "%4.1f*",
+ fprintf(stderr, "%3.1f*",
1.0 * p->tsc /
units * p->aperf /
p->mperf / interval_float);
@@ -241,7 +292,7 @@
if (do_nhm_cstates) {
if (!skip_c1)
- fprintf(stderr, "%7.2f", 100.0 * p->c1/p->tsc);
+ fprintf(stderr, " %6.2f", 100.0 * p->c1/p->tsc);
else
fprintf(stderr, " ****");
}
@@ -252,13 +303,13 @@
if (do_snb_cstates)
fprintf(stderr, " %6.2f", 100.0 * p->c7/p->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %5.2f", 100.0 * p->pc2/p->tsc);
+ fprintf(stderr, " %6.2f", 100.0 * p->pc2/p->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %5.2f", 100.0 * p->pc3/p->tsc);
+ fprintf(stderr, " %6.2f", 100.0 * p->pc3/p->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %5.2f", 100.0 * p->pc6/p->tsc);
+ fprintf(stderr, " %6.2f", 100.0 * p->pc6/p->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %5.2f", 100.0 * p->pc7/p->tsc);
+ fprintf(stderr, " %6.2f", 100.0 * p->pc7/p->tsc);
if (extra_msr_offset)
fprintf(stderr, " 0x%016llx", p->extra_msr);
putc('\n', stderr);
@@ -267,12 +318,20 @@
void print_counters(struct counters *counters)
{
struct counters *cnt;
+ static int printed;
- print_header();
+
+ if (!printed || !summary_only)
+ print_header();
if (num_cpus > 1)
print_cnt(cnt_average);
+ printed = 1;
+
+ if (summary_only)
+ return;
+
for (cnt = counters; cnt != NULL; cnt = cnt->next)
print_cnt(cnt);
@@ -440,31 +499,51 @@
free(sum);
}
-void get_counters(struct counters *cnt)
+int get_counters(struct counters *cnt)
{
for ( ; cnt; cnt = cnt->next) {
- cnt->tsc = get_msr(cnt->cpu, MSR_TSC);
- if (do_nhm_cstates)
- cnt->c3 = get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY);
- if (do_nhm_cstates)
- cnt->c6 = get_msr(cnt->cpu, MSR_CORE_C6_RESIDENCY);
+
+ if (cpu_migrate(cnt->cpu))
+ return -1;
+
+ if (get_msr(cnt->cpu, MSR_TSC, &cnt->tsc))
+ return -1;
+
+ if (has_aperf) {
+ if (get_msr(cnt->cpu, MSR_APERF, &cnt->aperf))
+ return -1;
+ if (get_msr(cnt->cpu, MSR_MPERF, &cnt->mperf))
+ return -1;
+ }
+
+ if (do_nhm_cstates) {
+ if (get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY, &cnt->c3))
+ return -1;
+ if (get_msr(cnt->cpu, MSR_CORE_C6_RESIDENCY, &cnt->c6))
+ return -1;
+ }
+
if (do_snb_cstates)
- cnt->c7 = get_msr(cnt->cpu, MSR_CORE_C7_RESIDENCY);
- if (has_aperf)
- cnt->aperf = get_msr(cnt->cpu, MSR_APERF);
- if (has_aperf)
- cnt->mperf = get_msr(cnt->cpu, MSR_MPERF);
- if (do_snb_cstates)
- cnt->pc2 = get_msr(cnt->cpu, MSR_PKG_C2_RESIDENCY);
- if (do_nhm_cstates)
- cnt->pc3 = get_msr(cnt->cpu, MSR_PKG_C3_RESIDENCY);
- if (do_nhm_cstates)
- cnt->pc6 = get_msr(cnt->cpu, MSR_PKG_C6_RESIDENCY);
- if (do_snb_cstates)
- cnt->pc7 = get_msr(cnt->cpu, MSR_PKG_C7_RESIDENCY);
+ if (get_msr(cnt->cpu, MSR_CORE_C7_RESIDENCY, &cnt->c7))
+ return -1;
+
+ if (do_nhm_cstates) {
+ if (get_msr(cnt->cpu, MSR_PKG_C3_RESIDENCY, &cnt->pc3))
+ return -1;
+ if (get_msr(cnt->cpu, MSR_PKG_C6_RESIDENCY, &cnt->pc6))
+ return -1;
+ }
+ if (do_snb_cstates) {
+ if (get_msr(cnt->cpu, MSR_PKG_C2_RESIDENCY, &cnt->pc2))
+ return -1;
+ if (get_msr(cnt->cpu, MSR_PKG_C7_RESIDENCY, &cnt->pc7))
+ return -1;
+ }
if (extra_msr_offset)
- cnt->extra_msr = get_msr(cnt->cpu, extra_msr_offset);
+ if (get_msr(cnt->cpu, extra_msr_offset, &cnt->extra_msr))
+ return -1;
}
+ return 0;
}
void print_nehalem_info(void)
@@ -475,7 +554,7 @@
if (!do_nehalem_platform_info)
return;
- msr = get_msr(0, MSR_NEHALEM_PLATFORM_INFO);
+ get_msr(0, MSR_NEHALEM_PLATFORM_INFO, &msr);
ratio = (msr >> 40) & 0xFF;
fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency\n",
@@ -491,7 +570,7 @@
if (!do_nehalem_turbo_ratio_limit)
return;
- msr = get_msr(0, MSR_NEHALEM_TURBO_RATIO_LIMIT);
+ get_msr(0, MSR_NEHALEM_TURBO_RATIO_LIMIT, &msr);
ratio = (msr >> 24) & 0xFF;
if (ratio)
@@ -557,7 +636,8 @@
return;
}
- show_cpu = 1; /* there is more than one CPU */
+ if (!summary_only)
+ show_cpu = 1; /* there is more than one CPU */
/*
* insert on front of list.
@@ -575,13 +655,15 @@
while (prev->next && (prev->next->pkg < new->pkg)) {
prev = prev->next;
- show_pkg = 1; /* there is more than 1 package */
+ if (!summary_only)
+ show_pkg = 1; /* there is more than 1 package */
}
while (prev->next && (prev->next->pkg == new->pkg)
&& (prev->next->core < new->core)) {
prev = prev->next;
- show_core = 1; /* there is more than 1 core */
+ if (!summary_only)
+ show_core = 1; /* there is more than 1 core */
}
while (prev->next && (prev->next->pkg == new->pkg)
@@ -681,7 +763,7 @@
}
/*
- * run func(index, cpu) on every cpu in /proc/stat
+ * run func(pkg, core, cpu) on every cpu in /proc/stat
*/
int for_all_cpus(void (func)(int, int, int))
@@ -717,18 +799,18 @@
void re_initialize(void)
{
- printf("turbostat: topology changed, re-initializing.\n");
free_all_counters();
num_cpus = for_all_cpus(alloc_new_counters);
- need_reinitialize = 0;
- printf("num_cpus is now %d\n", num_cpus);
+ cpu_mask_uninit();
+ cpu_mask_init(num_cpus);
+ printf("turbostat: re-initialized with num_cpus %d\n", num_cpus);
}
void dummy(int pkg, int core, int cpu) { return; }
/*
* check to see if a cpu came on-line
*/
-void verify_num_cpus(void)
+int verify_num_cpus(void)
{
int new_num_cpus;
@@ -738,8 +820,9 @@
if (verbose)
printf("num_cpus was %d, is now %d\n",
num_cpus, new_num_cpus);
- need_reinitialize = 1;
+ return -1;
}
+ return 0;
}
void turbostat_loop()
@@ -749,25 +832,25 @@
gettimeofday(&tv_even, (struct timezone *)NULL);
while (1) {
- verify_num_cpus();
- if (need_reinitialize) {
+ if (verify_num_cpus()) {
re_initialize();
goto restart;
}
sleep(interval_sec);
- get_counters(cnt_odd);
+ if (get_counters(cnt_odd)) {
+ re_initialize();
+ goto restart;
+ }
gettimeofday(&tv_odd, (struct timezone *)NULL);
-
compute_delta(cnt_odd, cnt_even, cnt_delta);
timersub(&tv_odd, &tv_even, &tv_delta);
compute_average(cnt_delta, cnt_average);
print_counters(cnt_delta);
- if (need_reinitialize) {
+ sleep(interval_sec);
+ if (get_counters(cnt_even)) {
re_initialize();
goto restart;
}
- sleep(interval_sec);
- get_counters(cnt_even);
gettimeofday(&tv_even, (struct timezone *)NULL);
compute_delta(cnt_even, cnt_odd, cnt_delta);
timersub(&tv_even, &tv_odd, &tv_delta);
@@ -953,6 +1036,7 @@
check_super_user();
num_cpus = for_all_cpus(alloc_new_counters);
+ cpu_mask_init(num_cpus);
if (verbose)
print_nehalem_info();
@@ -1005,8 +1089,11 @@
progname = argv[0];
- while ((opt = getopt(argc, argv, "+vi:M:")) != -1) {
+ while ((opt = getopt(argc, argv, "+svi:M:")) != -1) {
switch (opt) {
+ case 's':
+ summary_only++;
+ break;
case 'v':
verbose++;
break;
