ARM: 5658/1: bcmring: add csp dmac header files
add csp dmac header files
Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 0000000..5d51013
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.h
+*
+* @brief API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+ System specific channel ID should be defined as follows
+
+ For example:
+
+ #include <dmacHw.h>
+ ...
+ #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5)
+ #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0)
+ #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1)
+ #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3)
+ #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4)
+ ...
+ #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4)
+ #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5)
+ #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6)
+ ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c)
+
+typedef enum {
+ dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */
+ dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */
+ dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */
+ dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */
+ dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */
+ dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */
+ dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */
+ dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+ dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */
+ dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */
+ dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */
+ dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+ dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+ dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */
+ dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */
+ dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+ dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */
+ dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */
+ dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+ dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */
+ dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+ dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */
+ dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */
+ dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */
+ dmacHw_INTERRUPT_ENABLE /* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */
+ dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */
+ dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */
+typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using
+ "dmacHw_MAKE_CHANNEL_ID" macro
+ */
+/* DMA channel configuration parameters */
+typedef struct {
+ uint32_t srcPeripheralPort; /* Source peripheral port */
+ uint32_t dstPeripheralPort; /* Destination peripheral port */
+ uint32_t srcStatusRegisterAddress; /* Source status register address */
+ uint32_t dstStatusRegisterAddress; /* Destination status register address of type */
+
+ uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */
+ uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */
+ uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */
+ uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */
+ uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor.
+ 0 = Maximum possible.
+ */
+
+ dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */
+ dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */
+ dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */
+ dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */
+ dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */
+ dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */
+ dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */
+ dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */
+ dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */
+ dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */
+ dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */
+ dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */
+ dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */
+ dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */
+ dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it
+* is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ );
+
+/****************************************************************************/
+/**
+* @brief Read data DMA transferred to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ );
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will form the descriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+* of type dmacHw_INTERRUPT_STATUS_e
+* @note
+* This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ );
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+*
+* @return void
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 0000000..375066a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_priv.h
+*
+* @brief Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+ uint32_t sar; /* Source Adress Register.
+ Address must be aligned to CTLx.SRC_TR_WIDTH. */
+ uint32_t dar; /* Destination Address Register.
+ Address must be aligned to CTLx.DST_TR_WIDTH. */
+ uint32_t llpPhy; /* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+ Address MUST be aligned to a 32-bit boundary. */
+ dmacHw_REG64_t ctl; /* Control Register. 64 bits */
+ uint32_t sstat; /* Source Status Register */
+ uint32_t dstat; /* Destination Status Register */
+ uint32_t devCtl; /* Device specific control information */
+ uint32_t llp; /* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ * Descriptor ring pointers
+ */
+typedef struct {
+ int num; /* Number of link items */
+ dmacHw_DESC_t *pHead; /* Head of descriptor ring (for writing) */
+ dmacHw_DESC_t *pTail; /* Tail of descriptor ring (for reading) */
+ dmacHw_DESC_t *pProg; /* Descriptor to program the channel (for programming the channel register) */
+ dmacHw_DESC_t *pEnd; /* End of current descriptor chain */
+ dmacHw_DESC_t *pFree; /* Descriptor to free memory (freeing dynamic memory) */
+ uint32_t virt2PhyOffset; /* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ * DMA channel control block
+ */
+typedef struct {
+ uint32_t module; /* DMA controller module (0-1) */
+ uint32_t channel; /* DMA channel (0-7) */
+ volatile uint32_t varDataStarted; /* Flag indicating variable data channel is enabled */
+ volatile uint32_t descUpdated; /* Flag to indicate descriptor update is complete */
+ void *userData; /* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a) if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT 16
+#define dmacHw_FREE_USER_MEMORY 0xFFFFFFFF
+#define dmacHw_DESC_FREE dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE 4064
+#define dmacHw_GET_DESC_RING(addr) (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte) ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp) ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle) ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp) ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt) (((tt) == dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+* @brief Get next available transaction width
+*
+*
+* @return On sucess : Next avail able transaction width
+* On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Current transaction width */
+ ) {
+ if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+ } else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+ }
+
+ /* Default return */
+ return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+* @brief Get number of bytes per transaction
+*
+* @return Number of bytes per transaction
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Transaction width */
+ ) {
+ int width = 1;
+ switch (tw) {
+ case dmacHw_SRC_TRANSACTION_WIDTH_8:
+ width = 1;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_16:
+ case dmacHw_DST_TRANSACTION_WIDTH_16:
+ width = 2;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_32:
+ case dmacHw_DST_TRANSACTION_WIDTH_32:
+ width = 4;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_64:
+ case dmacHw_DST_TRANSACTION_WIDTH_64:
+ width = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+
+ /* Default transaction width */
+ return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 0000000..891cea8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_reg.h
+*
+* @brief Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+ volatile uint32_t lo; /* Lower 32 bit in little endian mode */
+ volatile uint32_t hi; /* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+ dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.SRC_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.DST_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelLlp; /* Link List Pointer.64 bits (upper 32 bits are reserved)
+ LLP contains the pointer to the next LLI for block chaining using linked lists.
+ If LLPis set to 0x0, then transfers using linked lists are not enabled.
+ Address MUST be aligned to a 32-bit boundary.
+ */
+ dmacHw_REG64_t ChannelCtl; /* Control Register. 64 bits */
+ dmacHw_REG64_t ChannelSstat; /* Source Status Register */
+ dmacHw_REG64_t ChannelDstat; /* Destination Status Register */
+ dmacHw_REG64_t ChannelSstatAddr; /* Source Status Address Register */
+ dmacHw_REG64_t ChannelDstatAddr; /* Destination Status Address Register */
+ dmacHw_REG64_t ChannelConfig; /* Channel Configuration Register */
+ dmacHw_REG64_t SrcGather; /* Source gather register */
+ dmacHw_REG64_t DstScatter; /* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t RawTfr; /* Raw Status for IntTfr Interrupt */
+ dmacHw_REG64_t RawBlock; /* Raw Status for IntBlock Interrupt */
+ dmacHw_REG64_t RawSrcTran; /* Raw Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t RawDstTran; /* Raw Status for IntDstTran Interrupt */
+ dmacHw_REG64_t RawErr; /* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t StatusTfr; /* Status for IntTfr Interrupt */
+ dmacHw_REG64_t StatusBlock; /* Status for IntBlock Interrupt */
+ dmacHw_REG64_t StatusSrcTran; /* Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t StatusDstTran; /* Status for IntDstTran Interrupt */
+ dmacHw_REG64_t StatusErr; /* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+ dmacHw_REG64_t MaskTfr; /* Mask for IntTfr Interrupt */
+ dmacHw_REG64_t MaskBlock; /* Mask for IntBlock Interrupt */
+ dmacHw_REG64_t MaskSrcTran; /* Mask for IntSrcTran Interrupt */
+ dmacHw_REG64_t MaskDstTran; /* Mask for IntDstTran Interrupt */
+ dmacHw_REG64_t MaskErr; /* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+ dmacHw_REG64_t ClearTfr; /* Clear for IntTfr Interrupt */
+ dmacHw_REG64_t ClearBlock; /* Clear for IntBlock Interrupt */
+ dmacHw_REG64_t ClearSrcTran; /* Clear for IntSrcTran Interrupt */
+ dmacHw_REG64_t ClearDstTran; /* Clear for IntDstTran Interrupt */
+ dmacHw_REG64_t ClearErr; /* Clear for IntErr Interrupt */
+ dmacHw_REG64_t StatusInt; /* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+ dmacHw_REG64_t ReqSrcReg; /* Source Software Transaction Request Register */
+ dmacHw_REG64_t ReqDstReg; /* Destination Software Transaction Request Register */
+ dmacHw_REG64_t SglReqSrcReg; /* Single Source Transaction Request Register */
+ dmacHw_REG64_t SglReqDstReg; /* Single Destination Transaction Request Register */
+ dmacHw_REG64_t LstSrcReg; /* Last Source Transaction Request Register */
+ dmacHw_REG64_t LstDstReg; /* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+ dmacHw_REG64_t DmaCfgReg; /* DMA Configuration Register */
+ dmacHw_REG64_t ChEnReg; /* DMA Channel Enable Register */
+ dmacHw_REG64_t DmaIdReg; /* DMA ID Register */
+ dmacHw_REG64_t DmaTestReg; /* DMA Test Register */
+ dmacHw_REG64_t Reserved0; /* Reserved */
+ dmacHw_REG64_t Reserved1; /* Reserved */
+ dmacHw_REG64_t CompParm6; /* Component Parameter 6 */
+ dmacHw_REG64_t CompParm5; /* Component Parameter 5 */
+ dmacHw_REG64_t CompParm4; /* Component Parameter 4 */
+ dmacHw_REG64_t CompParm3; /* Component Parameter 3 */
+ dmacHw_REG64_t CompParm2; /* Component Parameter 2 */
+ dmacHw_REG64_t CompParm1; /* Component Parameter 1 */
+ dmacHw_REG64_t CompId; /* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel) (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel) (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN 0x00000001 /* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK 0x0000000E /* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT 1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8 0x00000000 /* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16 0x00000002 /* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32 0x00000004 /* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64 0x00000006 /* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK 0x00000070 /* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT 4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8 0x00000000 /* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16 0x00000010 /* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32 0x00000020 /* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64 0x00000030 /* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE 0x00040000 /* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE 0x00020000 /* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK 0x00000180 /* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC 0x00000000 /* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC 0x00000080 /* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC 0x00000100 /* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK 0x00000600 /* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC 0x00000000 /* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC 0x00000200 /* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC 0x00000400 /* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK 0x00003800 /* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0 0x00000000 /* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4 0x00000800 /* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8 0x00001000 /* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16 0x00001800 /* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK 0x0001C000 /* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0 0x00000000 /* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4 0x00004000 /* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8 0x00008000 /* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16 0x0000C000 /* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK 0x00700000 /* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC 0x00000000 /* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC 0x00100000 /* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC 0x00200000 /* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC 0x00300000 /* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI 0x00400000 /* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI 0x00500000 /* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI 0x00600000 /* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI 0x00700000 /* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK 0x01800000 /* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1 0x00000000 /* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2 0x00800000 /* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK 0x06000000 /* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1 0x00000000 /* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2 0x02000000 /* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN 0x08000000 /* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN 0x10000000 /* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK 0x00000FFF /* Block transfer size */
+#define dmacHw_REG_CTL_DONE 0x00001000 /* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT 5 /* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK 0x000000E0 /* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0 0x00000000 /* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1 0x00000020 /* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2 0x00000040 /* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3 0x00000060 /* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4 0x00000080 /* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5 0x000000A0 /* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6 0x000000C0 /* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7 0x000000E0 /* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND 0x00000100 /* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY 0x00000200 /* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS 0x00000400 /* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS 0x00000800 /* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK 0x00003000 /* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA 0x00000000 /* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK 0x00001000 /* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS 0x00002000 /* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE 0x00010000 /* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK 0x0000C000 /* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA 0x00000000 /* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK 0x00004000 /* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS 0x00008000 /* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE 0x00020000 /* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW 0x00040000 /* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW 0x00080000 /* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK 0x3FF00000 /* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC 0x40000000 /* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST 0x80000000 /* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY 0x00000001 /* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH 0x00000002 /* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK 0x0000001C /* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1 0x00000004 /* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2 0x00000008 /* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3 0x00000010 /* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT 0x00000020 /* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT 0x00000040 /* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK 0x00000780 /* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK 0x00007800 /* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS 0x00000700 /* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE 0x00001800 /* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE 0x0000000f /* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH 0x00006000 /* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr) (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr) (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr) (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel) (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel) (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr) (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr) (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl) (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl) (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg) (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect) (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg) (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf) (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf) (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module) (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module) (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
