diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 3af45734..b3ee122 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -26,8 +26,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
-#define L2X0_TAG_LATENCY_CTRL		0x108
-#define L2X0_DATA_LATENCY_CTRL		0x10C
+#define L310_TAG_LATENCY_CTRL		0x108
+#define L310_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208
@@ -54,16 +54,16 @@
 #define L2X0_LOCKDOWN_WAY_D_BASE	0x900
 #define L2X0_LOCKDOWN_WAY_I_BASE	0x904
 #define L2X0_LOCKDOWN_STRIDE		0x08
-#define L2X0_ADDR_FILTER_START		0xC00
-#define L2X0_ADDR_FILTER_END		0xC04
+#define L310_ADDR_FILTER_START		0xC00
+#define L310_ADDR_FILTER_END		0xC04
 #define L2X0_TEST_OPERATION		0xF00
 #define L2X0_LINE_DATA			0xF10
 #define L2X0_LINE_TAG			0xF30
 #define L2X0_DEBUG_CTRL			0xF40
-#define L2X0_PREFETCH_CTRL		0xF60
-#define L2X0_POWER_CTRL			0xF80
-#define   L2X0_DYNAMIC_CLK_GATING_EN	(1 << 1)
-#define   L2X0_STNDBY_MODE_EN		(1 << 0)
+#define L310_PREFETCH_CTRL		0xF60
+#define L310_POWER_CTRL			0xF80
+#define   L310_DYNAMIC_CLK_GATING_EN	(1 << 1)
+#define   L310_STNDBY_MODE_EN		(1 << 0)
 
 /* Registers shifts and masks */
 #define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
@@ -88,29 +88,52 @@
 #define L310_CACHE_ID_RTL_R3P3		0x09
 
 #define L2X0_AUX_CTRL_MASK			0xc0000fff
+/* L2C auxiliary control register - bits common to L2C-210/220/310 */
+#define L2C_AUX_CTRL_WAY_SIZE_SHIFT		17
+#define L2C_AUX_CTRL_WAY_SIZE_MASK		(7 << 17)
+#define L2C_AUX_CTRL_WAY_SIZE(n)		((n) << 17)
+#define L2C_AUX_CTRL_EVTMON_ENABLE		BIT(20)
+#define L2C_AUX_CTRL_PARITY_ENABLE		BIT(21)
+#define L2C_AUX_CTRL_SHARED_OVERRIDE		BIT(22)
+/* L2C-210/220 common bits */
 #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT	0
-#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	0x7
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	(7 << 0)
 #define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT	3
-#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(0x7 << 3)
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(7 << 3)
 #define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT		6
-#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(0x7 << 6)
+#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(7 << 6)
 #define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT	9
-#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(0x7 << 9)
-#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
-#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x7 << 17)
-#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
-#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
-#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27
-#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT	28
-#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
-#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(7 << 9)
+#define L2X0_AUX_CTRL_ASSOC_SHIFT		13
+#define L2X0_AUX_CTRL_ASSOC_MASK		(15 << 13)
+/* L2C-210 specific bits */
+#define L210_AUX_CTRL_WRAP_DISABLE		BIT(12)
+#define L210_AUX_CTRL_WA_OVERRIDE		BIT(23)
+#define L210_AUX_CTRL_EXCLUSIVE_ABORT		BIT(24)
+/* L2C-220 specific bits */
+#define L220_AUX_CTRL_EXCLUSIVE_CACHE		BIT(12)
+#define L220_AUX_CTRL_FWA_SHIFT			23
+#define L220_AUX_CTRL_FWA_MASK			(3 << 23)
+#define L220_AUX_CTRL_NS_LOCKDOWN		BIT(26)
+#define L220_AUX_CTRL_NS_INT_CTRL		BIT(27)
+/* L2C-310 specific bits */
+#define L310_AUX_CTRL_FULL_LINE_ZERO		BIT(0)	/* R2P0+ */
+#define L310_AUX_CTRL_HIGHPRIO_SO_DEV		BIT(10)	/* R2P0+ */
+#define L310_AUX_CTRL_STORE_LIMITATION		BIT(11)	/* R2P0+ */
+#define L310_AUX_CTRL_EXCLUSIVE_CACHE		BIT(12)
+#define L310_AUX_CTRL_ASSOCIATIVITY_16		BIT(16)
+#define L310_AUX_CTRL_CACHE_REPLACE_RR		BIT(25)	/* R2P0+ */
+#define L310_AUX_CTRL_NS_LOCKDOWN		BIT(26)
+#define L310_AUX_CTRL_NS_INT_CTRL		BIT(27)
+#define L310_AUX_CTRL_DATA_PREFETCH		BIT(28)
+#define L310_AUX_CTRL_INSTR_PREFETCH		BIT(29)
+#define L310_AUX_CTRL_EARLY_BRESP		BIT(30)	/* R2P0+ */
 
-#define L2X0_LATENCY_CTRL_SETUP_SHIFT	0
-#define L2X0_LATENCY_CTRL_RD_SHIFT	4
-#define L2X0_LATENCY_CTRL_WR_SHIFT	8
+#define L310_LATENCY_CTRL_SETUP(n)		((n) << 0)
+#define L310_LATENCY_CTRL_RD(n)			((n) << 4)
+#define L310_LATENCY_CTRL_WR(n)			((n) << 8)
 
-#define L2X0_ADDR_FILTER_EN		1
+#define L310_ADDR_FILTER_EN		1
 
 #define L2X0_CTRL_EN			1
 
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 2ae28a6..5c31b26 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -272,9 +272,9 @@
 	 *
 	 * 1 cycle of latency for setup, read and write accesses
 	 */
-	val = readl(base + L2X0_TAG_LATENCY_CTRL);
+	val = readl(base + L310_TAG_LATENCY_CTRL);
 	val &= 0xfffff888;
-	writel(val, base + L2X0_TAG_LATENCY_CTRL);
+	writel(val, base + L310_TAG_LATENCY_CTRL);
 
 	/*
 	 * Data RAM Control register
@@ -285,9 +285,9 @@
 	 *
 	 * 1 cycle of latency for setup, read and write accesses
 	 */
-	val = readl(base + L2X0_DATA_LATENCY_CTRL);
+	val = readl(base + L310_DATA_LATENCY_CTRL);
 	val &= 0xfffff888;
-	writel(val, base + L2X0_DATA_LATENCY_CTRL);
+	writel(val, base + L310_DATA_LATENCY_CTRL);
 
 	/* 32 KiB, 8-way, parity disable */
 	l2x0_init(base, 0x00540000, 0xfe000fff);
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index a2613e9..7e0af53 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -65,13 +65,13 @@
 	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
 	str	r2, [r1, #L2X0_AUX_CTRL]
 	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
-	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+	str	r2, [r1, #L310_TAG_LATENCY_CTRL]
 	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
-	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+	str	r2, [r1, #L310_DATA_LATENCY_CTRL]
 	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
-	str	r2, [r1, #L2X0_PREFETCH_CTRL]
+	str	r2, [r1, #L310_PREFETCH_CTRL]
 	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
-	str	r2, [r1, #L2X0_POWER_CTRL]
+	str	r2, [r1, #L310_POWER_CTRL]
 	mov	r2, #1
 	str	r2, [r1, #L2X0_CTRL]
 skip_l2_resume:
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index c6571f1..59013a8 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -124,7 +124,7 @@
 	}
 
 	/* Configure the L2 PREFETCH and POWER registers */
-	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+	val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
 	val |= 0x70800000;
 	/*
 	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
@@ -137,9 +137,9 @@
 	 */
 	if (cpu_is_imx6q())
 		val &= ~(1 << 30 | 1 << 23);
-	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
-	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+	writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
+	val = L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN;
+	writel_relaxed(val, l2x0_base + L310_POWER_CTRL);
 
 	iounmap(l2x0_base);
 	of_node_put(np);
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 667915d..ba43f49 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -194,7 +194,7 @@
 	if (l2x0_base) {
 		val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
 		__raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
-		val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
+		val = __raw_readl(l2x0_base + L310_PREFETCH_CTRL);
 		__raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
 	}
 }
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 48cf74d..1dfb806 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -197,15 +197,15 @@
 		return -ENOMEM;
 
 	/* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */
-	aux_ctrl = (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) |
-			(0x1 << 25) |
-			(0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) |
-			(0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT)) |
-			(0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT);
+	aux_ctrl = L310_AUX_CTRL_ASSOCIATIVITY_16 |
+		   L310_AUX_CTRL_CACHE_REPLACE_RR |
+		   L310_AUX_CTRL_NS_LOCKDOWN |
+		   L310_AUX_CTRL_NS_INT_CTRL |
+		   L2C_AUX_CTRL_WAY_SIZE(3) |
+		   L2C_AUX_CTRL_SHARED_OVERRIDE |
+		   L310_AUX_CTRL_DATA_PREFETCH |
+		   L310_AUX_CTRL_INSTR_PREFETCH |
+		   L310_AUX_CTRL_EARLY_BRESP;
 
 	omap_smc1(0x109, aux_ctrl);
 
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index c710253..2db8274 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -17,13 +17,12 @@
 };
 
 static const struct l2x0_aux prima2_l2x0_aux __initconst = {
-	.val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT,
+	.val = L2C_AUX_CTRL_WAY_SIZE(2),
 	.mask =	0,
 };
 
 static const struct l2x0_aux marco_l2x0_aux __initconst = {
-	.val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
-		(1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT),
+	.val = L2C_AUX_CTRL_WAY_SIZE(2) | L310_AUX_CTRL_ASSOCIATIVITY_16,
 	.mask = L2X0_AUX_CTRL_MASK,
 };
 
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 9d75493..f0cfd7e 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -370,8 +370,8 @@
 			__io_address(REALVIEW_PBX_TILE_L220_BASE);
 
 		/* set RAM latencies to 1 cycle for eASIC */
-		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
 
 		/* 16KB way size, 8-way associativity, parity disabled
 		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 7aa6e8cf..92860fa 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -38,14 +38,14 @@
 	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
 		return;
 
-	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+	writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL);
 
 	/*
 	 * Program following latencies in order to make
 	 * SPEAr1340 work at 600 MHz
 	 */
-	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
-	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+	writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL);
 	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
 }
 
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 1217fb5..dc8669e 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -19,10 +19,10 @@
 	u32 way_size = 0x4;
 	u32 aux_ctrl;
 	/* may be this can be encoded in macros like BIT*() */
-	aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
-		(0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
-		(0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
-		(way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+	aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE |
+		   L310_AUX_CTRL_DATA_PREFETCH |
+		   L310_AUX_CTRL_INSTR_PREFETCH |
+		   L2C_AUX_CTRL_WAY_SIZE(way_size);
 
 	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
 }
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index a4edbb3..a032820 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -134,13 +134,13 @@
 	tst	\tmp3, #L2X0_CTRL_EN
 	bne	exit_l2_resume
 	ldr	\tmp3, [\tmp1, #L2X0_R_TAG_LATENCY]
-	str	\tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL]
+	str	\tmp3, [\tmp2, #L310_TAG_LATENCY_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_DATA_LATENCY]
-	str	\tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL]
+	str	\tmp3, [\tmp2, #L310_DATA_LATENCY_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL]
-	str	\tmp3, [\tmp2, #L2X0_PREFETCH_CTRL]
+	str	\tmp3, [\tmp2, #L310_PREFETCH_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_PWR_CTRL]
-	str	\tmp3, [\tmp2, #L2X0_POWER_CTRL]
+	str	\tmp3, [\tmp2, #L310_POWER_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_AUX_CTRL]
 	str	\tmp3, [\tmp2, #L2X0_AUX_CTRL]
 	mov	\tmp3, #L2X0_CTRL_EN
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 264f894..132cd2b 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -51,10 +51,10 @@
 	/* DBx540's L2 has 128KB way size */
 	if (cpu_is_ux540_family())
 		/* 128KB way size */
-		aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+		aux_val |= L2C_AUX_CTRL_WAY_SIZE(4);
 	else
 		/* 64KB way size */
-		aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+		aux_val |= L2C_AUX_CTRL_WAY_SIZE(3);
 
 	/* 64KB way size, 8 way associativity, force WA */
 	if (of_have_populated_dt())
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 6f34497..6c4ffb6 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -145,8 +145,8 @@
 	void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
 
 	/* set RAM latencies to 1 cycle for this core tile. */
-	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+	writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
+	writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
 
 	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 84933f4..c5c8a41 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -576,13 +576,13 @@
 	unsigned revision;
 
 	l2x0_saved_regs.tag_latency = readl_relaxed(base +
-		L2X0_TAG_LATENCY_CTRL);
+		L310_TAG_LATENCY_CTRL);
 	l2x0_saved_regs.data_latency = readl_relaxed(base +
-		L2X0_DATA_LATENCY_CTRL);
+		L310_DATA_LATENCY_CTRL);
 	l2x0_saved_regs.filter_end = readl_relaxed(base +
-		L2X0_ADDR_FILTER_END);
+		L310_ADDR_FILTER_END);
 	l2x0_saved_regs.filter_start = readl_relaxed(base +
-		L2X0_ADDR_FILTER_START);
+		L310_ADDR_FILTER_START);
 
 	revision = readl_relaxed(base + L2X0_CACHE_ID) &
 			L2X0_CACHE_ID_RTL_MASK;
@@ -590,12 +590,12 @@
 	/* From r2p0, there is Prefetch offset/control register */
 	if (revision >= L310_CACHE_ID_RTL_R2P0)
 		l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
-							L2X0_PREFETCH_CTRL);
+							L310_PREFETCH_CTRL);
 
 	/* From r3p0, there is Power control register */
 	if (revision >= L310_CACHE_ID_RTL_R3P0)
 		l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
-							L2X0_POWER_CTRL);
+							L310_POWER_CTRL);
 }
 
 static void l2c310_resume(void)
@@ -607,23 +607,23 @@
 
 		/* restore pl310 setup */
 		writel_relaxed(l2x0_saved_regs.tag_latency,
-			       base + L2X0_TAG_LATENCY_CTRL);
+			       base + L310_TAG_LATENCY_CTRL);
 		writel_relaxed(l2x0_saved_regs.data_latency,
-			       base + L2X0_DATA_LATENCY_CTRL);
+			       base + L310_DATA_LATENCY_CTRL);
 		writel_relaxed(l2x0_saved_regs.filter_end,
-			       base + L2X0_ADDR_FILTER_END);
+			       base + L310_ADDR_FILTER_END);
 		writel_relaxed(l2x0_saved_regs.filter_start,
-			       base + L2X0_ADDR_FILTER_START);
+			       base + L310_ADDR_FILTER_START);
 
 		revision = readl_relaxed(base + L2X0_CACHE_ID) &
 				L2X0_CACHE_ID_RTL_MASK;
 
 		if (revision >= L310_CACHE_ID_RTL_R2P0)
 			l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base,
-				      L2X0_PREFETCH_CTRL);
+				      L310_PREFETCH_CTRL);
 		if (revision >= L310_CACHE_ID_RTL_R3P0)
 			l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base,
-				      L2X0_POWER_CTRL);
+				      L310_POWER_CTRL);
 
 		l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);
 	}
@@ -658,11 +658,11 @@
 
 	if (revision >= L310_CACHE_ID_RTL_R3P0 &&
 	    revision < L310_CACHE_ID_RTL_R3P2) {
-		u32 val = readl_relaxed(base + L2X0_PREFETCH_CTRL);
+		u32 val = readl_relaxed(base + L310_PREFETCH_CTRL);
 		/* I don't think bit23 is required here... but iMX6 does so */
 		if (val & (BIT(30) | BIT(23))) {
 			val &= ~(BIT(30) | BIT(23));
-			l2c_write_sec(val, base, L2X0_PREFETCH_CTRL);
+			l2c_write_sec(val, base, L310_PREFETCH_CTRL);
 			errata[n++] = "752271";
 		}
 	}
@@ -759,7 +759,8 @@
 	 *
 	 * L2 cache size = number of ways * way size.
 	 */
-	way_size_bits = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
+	way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >>
+			L2C_AUX_CTRL_WAY_SIZE_SHIFT;
 	l2x0_size = ways * (data->way_size_0 << way_size_bits);
 
 	fns = data->outer_cache;
@@ -902,27 +903,27 @@
 	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
 	if (tag[0] && tag[1] && tag[2])
 		writel_relaxed(
-			((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_TAG_LATENCY_CTRL);
+			L310_LATENCY_CTRL_RD(tag[0] - 1) |
+			L310_LATENCY_CTRL_WR(tag[1] - 1) |
+			L310_LATENCY_CTRL_SETUP(tag[2] - 1),
+			l2x0_base + L310_TAG_LATENCY_CTRL);
 
 	of_property_read_u32_array(np, "arm,data-latency",
 				   data, ARRAY_SIZE(data));
 	if (data[0] && data[1] && data[2])
 		writel_relaxed(
-			((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_DATA_LATENCY_CTRL);
+			L310_LATENCY_CTRL_RD(data[0] - 1) |
+			L310_LATENCY_CTRL_WR(data[1] - 1) |
+			L310_LATENCY_CTRL_SETUP(data[2] - 1),
+			l2x0_base + L310_DATA_LATENCY_CTRL);
 
 	of_property_read_u32_array(np, "arm,filter-ranges",
 				   filter, ARRAY_SIZE(filter));
 	if (filter[1]) {
 		writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
-			       l2x0_base + L2X0_ADDR_FILTER_END);
-		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
-			       l2x0_base + L2X0_ADDR_FILTER_START);
+			       l2x0_base + L310_ADDR_FILTER_END);
+		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
+			       l2x0_base + L310_ADDR_FILTER_START);
 	}
 }
 
@@ -1298,7 +1299,7 @@
 	l2x0_saved_regs.aux2_ctrl =
 		readl_relaxed(base + TAUROS3_AUX2_CTRL);
 	l2x0_saved_regs.prefetch_ctrl =
-		readl_relaxed(base + L2X0_PREFETCH_CTRL);
+		readl_relaxed(base + L310_PREFETCH_CTRL);
 }
 
 static void tauros3_resume(void)
@@ -1309,7 +1310,7 @@
 		writel_relaxed(l2x0_saved_regs.aux2_ctrl,
 			       base + TAUROS3_AUX2_CTRL);
 		writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
-			       base + L2X0_PREFETCH_CTRL);
+			       base + L310_PREFETCH_CTRL);
 
 		l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);
 	}