# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

%YAML 1.2
---
$id: http://devicetree.org/schemas/media/amphion,vpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Amphion VPU codec IP

maintainers:
  - Ming Qian <ming.qian@nxp.com>
  - Shijie Qin <shijie.qin@nxp.com>

description: |-
  The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present
  on NXP i.MX8Q SoCs.

properties:
  $nodename:
    pattern: "^vpu@[0-9a-f]+$"

  compatible:
    items:
      - enum:
          - nxp,imx8qm-vpu
          - nxp,imx8qxp-vpu

  reg:
    maxItems: 1

  power-domains:
    maxItems: 1

  "#address-cells":
    const: 1

  "#size-cells":
    const: 1

  ranges: true

patternProperties:
  "^mailbox@[0-9a-f]+$":
    description:
      Each vpu encoder or decoder correspond a MU, which used for communication
      between driver and firmware. Implement via mailbox on driver.
    $ref: ../mailbox/fsl,mu.yaml#


  "^vpu_core@[0-9a-f]+$":
    description:
      Each core correspond a decoder or encoder, need to configure them
      separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
      has one decoder and one encoder.
    type: object

    properties:
      compatible:
        items:
          - enum:
              - nxp,imx8q-vpu-decoder
              - nxp,imx8q-vpu-encoder

      reg:
        maxItems: 1

      power-domains:
        maxItems: 1

      mbox-names:
        items:
          - const: tx0
          - const: tx1
          - const: rx

      mboxes:
        description:
          List of phandle of 2 MU channels for tx, 1 MU channel for rx.
        maxItems: 3

      memory-region:
        description:
          Phandle to the reserved memory nodes to be associated with the
          remoteproc device. The reserved memory nodes should be carveout nodes,
          and should be defined as per the bindings in
          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
        items:
          - description: region reserved for firmware image sections.
          - description: region used for RPC shared memory between firmware and
                         driver.

    required:
      - compatible
      - reg
      - power-domains
      - mbox-names
      - mboxes
      - memory-region

    additionalProperties: false

required:
  - compatible
  - reg
  - power-domains

additionalProperties: false

examples:
  # Device node example for i.MX8QM platform:
  - |
    #include <dt-bindings/firmware/imx/rsrc.h>

    vpu: vpu@2c000000 {
      compatible = "nxp,imx8qm-vpu";
      ranges = <0x2c000000 0x2c000000 0x2000000>;
      reg = <0x2c000000 0x1000000>;
      #address-cells = <1>;
      #size-cells = <1>;
      power-domains = <&pd IMX_SC_R_VPU>;

      mu_m0: mailbox@2d000000 {
        compatible = "fsl,imx6sx-mu";
        reg = <0x2d000000 0x20000>;
        interrupts = <0 472 4>;
        #mbox-cells = <2>;
        power-domains = <&pd IMX_SC_R_VPU_MU_0>;
      };

      mu1_m0: mailbox@2d020000 {
        compatible = "fsl,imx6sx-mu";
        reg = <0x2d020000 0x20000>;
        interrupts = <0 473 4>;
        #mbox-cells = <2>;
        power-domains = <&pd IMX_SC_R_VPU_MU_1>;
      };

      mu2_m0: mailbox@2d040000 {
        compatible = "fsl,imx6sx-mu";
        reg = <0x2d040000 0x20000>;
        interrupts = <0 474 4>;
        #mbox-cells = <2>;
        power-domains = <&pd IMX_SC_R_VPU_MU_2>;
      };

      vpu_core0: vpu_core@2d080000 {
        compatible = "nxp,imx8q-vpu-decoder";
        reg = <0x2d080000 0x10000>;
        power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
        mbox-names = "tx0", "tx1", "rx";
        mboxes = <&mu_m0 0 0>,
                 <&mu_m0 0 1>,
                 <&mu_m0 1 0>;
        memory-region = <&decoder_boot>, <&decoder_rpc>;
      };

      vpu_core1: vpu_core@2d090000 {
        compatible = "nxp,imx8q-vpu-encoder";
        reg = <0x2d090000 0x10000>;
        power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
        mbox-names = "tx0", "tx1", "rx";
        mboxes = <&mu1_m0 0 0>,
                 <&mu1_m0 0 1>,
                 <&mu1_m0 1 0>;
        memory-region = <&encoder1_boot>, <&encoder1_rpc>;
      };

      vpu_core2: vpu_core@2d0a0000 {
        reg = <0x2d0a0000 0x10000>;
        compatible = "nxp,imx8q-vpu-encoder";
        power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
        mbox-names = "tx0", "tx1", "rx";
        mboxes = <&mu2_m0 0 0>,
                 <&mu2_m0 0 1>,
                 <&mu2_m0 1 0>;
        memory-region = <&encoder2_boot>, <&encoder2_rpc>;
      };
    };

...