[PATCH] PPC 44x EMAC driver: add 440GR support
Add PowerPC 440GR support
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6d4f9ce..97760c1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1203,7 +1203,7 @@
config IBM_EMAC_PHY_RX_CLK_FIX
bool "PHY Rx clock workaround"
- depends on IBM_EMAC && (405EP || 440GX || 440EP)
+ depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
help
Enable this if EMAC attached to a PHY which doesn't generate
RX clock if there is no link, if this is the case, you will
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index d3166da..644edbf 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -26,7 +26,8 @@
/* This is a simple check to prevent use of this driver on non-tested SoCs */
#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
!defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
- !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE)
+ !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440GR)
#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
#endif
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 48239e1..eb7d694 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -87,10 +87,11 @@
*/
static u32 busy_phy_map;
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP))
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \
+ (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR))
/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
* with PHY RX clock problem.
- * 440EP has more sane SDR0_MFR register implementation than 440GX, which
+ * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which
* also allows controlling each EMAC clock
*/
static inline void EMAC_RX_CLK_TX(int idx)
@@ -100,7 +101,7 @@
#if defined(CONFIG_405EP)
mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
-#else /* CONFIG_440EP */
+#else /* CONFIG_440EP || CONFIG_440GR */
SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
#endif
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
index fb6dfe1..2a2d3b2 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ b/drivers/net/ibm_emac/ibm_emac_mal.h
@@ -32,7 +32,7 @@
* reflect the fact that 40x and 44x have slightly different MALs. --ebs
*/
#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
- defined(CONFIG_440EP) || defined(CONFIG_NP405H)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H)
#define MAL_VERSION 1
#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
defined(CONFIG_440SPE)
