diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
index 64fc82b..0df6aca 100644
--- a/Documentation/devicetree/bindings/arm/primecell.txt
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -16,14 +16,31 @@
 - clocks : From common clock binding. First clock is phandle to clock for apb
 	pclk. Additional clocks are optional and specific to those peripherals.
 - clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
+- dmas : From common DMA binding. If present, refers to one or more dma channels.
+- dma-names : From common DMA binding, needs to match the 'dmas' property.
+              Devices with exactly one receive and transmit channel shall name
+              these "rx" and "tx", respectively.
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+- pinctrl-names : Names corresponding to the numbered pinctrl states
+- interrupts : one or more interrupt specifiers
+- interrupt-names : names corresponding to the interrupts properties
 
 Example:
 
 serial@fff36000 {
 	compatible = "arm,pl011", "arm,primecell";
 	arm,primecell-periphid = <0x00341011>;
+
 	clocks = <&pclk>;
 	clock-names = "apb_pclk";
-	
+
+	dmas = <&dma-controller 4>, <&dma-controller 5>;
+	dma-names = "rx", "tx";	
+
+	pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+	pinctrl-1 = <&uart0_sleep_mode>;
+	pinctrl-names = "default","sleep";
+
+	interrupts = <0 11 0x4>;
 };
 
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
index 95ec7f8..2aff154 100644
--- a/Documentation/devicetree/bindings/ata/pata-arasan.txt
+++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -6,6 +6,26 @@
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
 - interrupt: Should contain the CF interrupt number
+- clock-frequency: Interface clock rate, in Hz, one of
+       25000000
+       33000000
+       40000000
+       50000000
+       66000000
+       75000000
+      100000000
+      125000000
+      150000000
+      166000000
+      200000000
+
+Optional properties:
+- arasan,broken-udma: if present, UDMA mode is unusable
+- arasan,broken-mwdma: if present, MWDMA mode is unusable
+- arasan,broken-pio: if present, PIO mode is unusable
+- dmas: one DMA channel, as described in bindings/dma/dma.txt
+  required unless both UDMA and MWDMA mode are broken
+- dma-names: the corresponding channel name, must be "data"
 
 Example:
 
@@ -14,4 +34,6 @@
 		reg = <0xfc000000 0x1000>;
 		interrupt-parent = <&vic1>;
 		interrupts = <12>;
+		dmas = <&dma-controller 23>;
+		dma-names = "data";
 	};
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
new file mode 100644
index 0000000..5d2e840
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -0,0 +1,17 @@
+* ARM AMBA Primecell PL011 serial UART
+
+Required properties:
+- compatible: must be "arm,primecell", "arm,pl011"
+- reg: exactly one register range with length 0x1000
+- interrupts: exactly one interrupt specifier
+
+Optional properties:
+- pinctrl: When present, must have one state named "sleep"
+	   and one state named "default"
+- clocks:  When present, must refer to exactly one clock named
+	   "apb_pclk"
+- dmas:	   When present, may have one or two dma channels.
+	   The first one must be named "rx", the second one
+	   must be named "tx".
+
+See also bindings/arm/primecell.txt
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
index f158fd3..22ed679 100644
--- a/Documentation/devicetree/bindings/spi/spi_pl022.txt
+++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt
@@ -16,6 +16,11 @@
                             device will be suspended immediately
 - pl022,rt : indicates the controller should run the message pump with realtime
              priority to minimise the transfer latency on the bus (boolean)
+- dmas : Two or more DMA channel specifiers following the convention outlined
+         in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+	     least one channel named "tx" for transmit and named "rx" for
+             receive.
 
 
 SPI slave nodes must be children of the SPI master node and can
@@ -32,3 +37,34 @@
 - pl022,wait-state : Microwire interface: Wait state
 - pl022,duplex : Microwire interface: Full/Half duplex
 
+
+Example:
+
+	spi@e0100000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0xe0100000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 31 0x4>;
+		dmas = <&dma-controller 23 1>,
+			<&dma-controller 24 0>;
+		dma-names = "rx", "tx";
+
+		m25p80@1 {
+			compatible = "st,m25p80";
+			reg = <1>;
+			spi-max-frequency = <12000000>;
+			spi-cpol;
+			spi-cpha;
+			pl022,hierarchy = <0>;
+			pl022,interface = <0>;
+			pl022,slave-tx-disable;
+			pl022,com-mode = <0x2>;
+			pl022,rx-level-trig = <0>;
+			pl022,tx-level-trig = <0>;
+			pl022,ctrl-len = <0x11>;
+			pl022,wait-state = <0>;
+			pl022,duplex = <0>;
+		};
+	};
+	
diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt
new file mode 100644
index 0000000..5cd8eee
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,sp804.txt
@@ -0,0 +1,29 @@
+ARM sp804 Dual Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "arm,sp804" & "arm,primecell"
+- interrupts: Should contain the list of Dual Timer interrupts. This is the
+	interrupt for timer 1 and timer 2. In the case of a single entry, it is
+	the combined interrupt or if "arm,sp804-has-irq" is present that
+	specifies which timer interrupt is connected.
+- reg: Should contain location and length for dual timer register.
+- clocks: clocks driving the dual timer hardware. This list should be 1 or 3
+	clocks.	With 3 clocks, the order is timer0 clock, timer1 clock,
+	apb_pclk. A single clock can also be specified if the same clock is
+	used for all clock inputs.
+
+Optional properties:
+- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this
+	specifies if the irq connection is for timer 1 or timer 2. A value of 1
+	or 2 should be used.
+
+Example:
+
+	timer0: timer@fc800000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0xfc800000 0x1000>;
+		interrupts = <0 0 4>, <0 1 4>;
+		clocks = <&timclk1 &timclk2 &pclk>;
+		clock-names = "timer1", "timer2", "apb_pclk";
+	};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 18bef30..34ef016 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1059,6 +1059,7 @@
 config ARM_TIMER_SP804
 	bool
 	select CLKSRC_MMIO
+	select CLKSRC_OF if OF
 
 source arch/arm/mm/Kconfig
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6611ea..5f1f4df 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -194,6 +194,8 @@
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
 	tegra114-pluto.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
+	versatile-pb.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 	vexpress-v2p-ca9.dtb \
 	vexpress-v2p-ca15-tc1.dtb \
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index f8f7370..bf18a73 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,6 +108,7 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
 				interrupts = <21 4 0>;
+				#dma-cells = <2>;
 			};
 
 			pinctrl@fffff200 {
@@ -533,6 +534,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <11 4 0>;
+				dmas = <&dma 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -542,6 +545,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
 				interrupts = <29 4 0>;
+				dmas = <&dma 1 13>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index b2961f1..3de8e6d 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -89,6 +89,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 4 0>;
+				dmas = <&dma 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -110,6 +112,7 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 4 0>;
+				#dma-cells = <2>;
 			};
 
 			pinctrl@fffff400 {
@@ -378,6 +381,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
 				interrupts = <9 4 6>;
+				dmas = <&dma 1 13>,
+				       <&dma 1 14>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -387,6 +393,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
 				interrupts = <10 4 6>;
+				dmas = <&dma 1 15>,
+				       <&dma 1 16>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 640b3bb..1145ac3 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -104,12 +104,14 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 4 0>;
+				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller@ffffee00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffee00 0x200>;
 				interrupts = <21 4 0>;
+				#dma-cells = <2>;
 			};
 
 			pinctrl@fffff400 {
@@ -465,6 +467,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 4 0>;
+				dmas = <&dma0 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -474,6 +478,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf000c000 0x600>;
 				interrupts = <26 4 0>;
+				dmas = <&dma1 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -535,6 +541,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
 				interrupts = <9 4 6>;
+				dmas = <&dma0 1 7>,
+				       <&dma0 1 8>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pinctrl-names = "default";
@@ -546,6 +555,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
 				interrupts = <10 4 6>;
+				dmas = <&dma1 1 5>,
+				       <&dma1 1 6>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pinctrl-names = "default";
@@ -557,6 +569,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8018000 0x100>;
 				interrupts = <11 4 6>;
+				dmas = <&dma0 1 9>,
+				       <&dma0 1 10>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 8b11939..ff1aea0 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -24,15 +24,15 @@
 	};
 
 	timer0: timer@13000000 {
-		compatible = "arm,sp804", "arm,primecell";
+		compatible = "arm,integrator-cp-timer";
 	};
 
 	timer1: timer@13000100 {
-		compatible = "arm,sp804", "arm,primecell";
+		compatible = "arm,integrator-cp-timer";
 	};
 
 	timer2: timer@13000200 {
-		compatible = "arm,sp804", "arm,primecell";
+		compatible = "arm,integrator-cp-timer";
 	};
 
 	pic: pic@14000000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 39b0458..2e643ea 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -60,6 +60,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf0000000 0x600>;
 				interrupts = <21 4 0>;
+				dmas = <&dma0 2 0>;
+				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
 				status = "disabled";
@@ -111,6 +113,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf0014000 0x4000>;
 				interrupts = <18 4 6>;
+				dmas = <&dma0 2 7>,
+				       <&dma0 2 8>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
 				#address-cells = <1>;
@@ -122,6 +127,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf0018000 0x4000>;
 				interrupts = <19 4 6>;
+				dmas = <&dma0 2 9>,
+				       <&dma0 2 10>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
 				#address-cells = <1>;
@@ -167,6 +175,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf8000000 0x600>;
 				interrupts = <22 4 0>;
+				dmas = <&dma1 2 0>;
+				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
 				status = "disabled";
@@ -178,6 +188,8 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf8004000 0x600>;
 				interrupts = <23 4 0>;
+				dmas = <&dma1 2 1>;
+				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
 				status = "disabled";
@@ -294,6 +306,9 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf801c000 0x4000>;
 				interrupts = <20 4 6>;
+				dmas = <&dma1 2 11>,
+				       <&dma1 2 12>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -348,14 +363,14 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller@ffffe800 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			ramc0: ramc@ffffea00 {
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index d2739f8..6bebfcd 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Atmel SAMA5D34-EK";
-	compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index c511c47..54d128d 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -113,6 +113,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
+				dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
+					<&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+				dma-names = "tx", "rx";
 			};
 
 			thermal@e07008c4 {
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index b4ca60f..45597fd 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -98,13 +98,24 @@
 			reg = <0xb2800000 0x1000>;
 			interrupts = <0 29 0x4>;
 			status = "disabled";
+			dmas = <&dwdma0 0 0 0 0>;
+			dma-names = "data";
 		};
 
-		dma@ea800000 {
+		dwdma0: dma@ea800000 {
 			compatible = "snps,dma-spear1340";
 			reg = <0xea800000 0x1000>;
 			interrupts = <0 19 0x4>;
 			status = "disabled";
+
+			dma-channels = <8>;
+			#dma-cells = <3>;
+			dma-requests = <32>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			dma-masters = <2>;
+			data_width = <3 3 0 0>;
 		};
 
 		dma@eb000000 {
@@ -112,6 +123,15 @@
 			reg = <0xeb000000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
+
+			dma-requests = <32>;
+			dma-channels = <8>;
+			dma-masters = <2>;
+			#dma-cells = <3>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			data_width = <3 3 0 0>;
 		};
 
 		fsmc: flash@b0000000 {
@@ -261,6 +281,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
+				dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
+					<&dwdma0 0x0280 0 0 0>;  /* 0x5 << 7 */
+				dma-names = "tx", "rx";
 			};
 
 			rtc@e0580000 {
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index e2fe319..dde75ae 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -121,6 +121,18 @@
 			interrupts = <0>;
 		};
 
+		timer@101e2000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e2000 0x1000>;
+			interrupts = <4>;
+		};
+
+		timer@101e3000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e3000 0x1000>;
+			interrupts = <5>;
+		};
+
 		gpio0: gpio@101e4000 {
 			compatible = "arm,pl061", "arm,primecell";
 			reg = <0x101e4000 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 1420bb1..62d9b22 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -98,6 +98,7 @@
 			     <0 49 4>;
 		clocks = <&oscclk2>, <&oscclk2>;
 		clock-names = "timclk", "apb_pclk";
+		status = "disabled";
 	};
 
 	watchdog@100e5000 {
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 9d2d3ba..ddc7407 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -25,33 +25,29 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/sched_clock.h>
 #include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
 
-static long __init sp804_get_clock_rate(const char *name)
+static long __init sp804_get_clock_rate(struct clk *clk)
 {
-	struct clk *clk;
 	long rate;
 	int err;
 
-	clk = clk_get_sys("sp804", name);
-	if (IS_ERR(clk)) {
-		pr_err("sp804: %s clock not found: %d\n", name,
-			(int)PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
-
 	err = clk_prepare(clk);
 	if (err) {
-		pr_err("sp804: %s clock failed to prepare: %d\n", name, err);
+		pr_err("sp804: clock failed to prepare: %d\n", err);
 		clk_put(clk);
 		return err;
 	}
 
 	err = clk_enable(clk);
 	if (err) {
-		pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+		pr_err("sp804: clock failed to enable: %d\n", err);
 		clk_unprepare(clk);
 		clk_put(clk);
 		return err;
@@ -59,7 +55,7 @@
 
 	rate = clk_get_rate(clk);
 	if (rate < 0) {
-		pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
+		pr_err("sp804: clock failed to get rate: %ld\n", rate);
 		clk_disable(clk);
 		clk_unprepare(clk);
 		clk_put(clk);
@@ -77,9 +73,21 @@
 
 void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 						     const char *name,
+						     struct clk *clk,
 						     int use_sched_clock)
 {
-	long rate = sp804_get_clock_rate(name);
+	long rate;
+
+	if (!clk) {
+		clk = clk_get_sys("sp804", name);
+		if (IS_ERR(clk)) {
+			pr_err("sp804: clock not found: %d\n",
+			       (int)PTR_ERR(clk));
+			return;
+		}
+	}
+
+	rate = sp804_get_clock_rate(clk);
 
 	if (rate < 0)
 		return;
@@ -171,12 +179,20 @@
 	.dev_id		= &sp804_clockevent,
 };
 
-void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
-	const char *name)
+void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
-	long rate = sp804_get_clock_rate(name);
+	long rate;
 
+	if (!clk)
+		clk = clk_get_sys("sp804", name);
+	if (IS_ERR(clk)) {
+		pr_err("sp804: %s clock not found: %d\n", name,
+			(int)PTR_ERR(clk));
+		return;
+	}
+
+	rate = sp804_get_clock_rate(clk);
 	if (rate < 0)
 		return;
 
@@ -186,6 +202,98 @@
 	evt->irq = irq;
 	evt->cpumask = cpu_possible_mask;
 
+	writel(0, base + TIMER_CTRL);
+
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
 }
+
+static void __init sp804_of_init(struct device_node *np)
+{
+	static bool initialized = false;
+	void __iomem *base;
+	int irq;
+	u32 irq_num = 0;
+	struct clk *clk1, *clk2;
+	const char *name = of_get_property(np, "compatible", NULL);
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return;
+
+	/* Ensure timers are disabled */
+	writel(0, base + TIMER_CTRL);
+	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
+
+	if (initialized || !of_device_is_available(np))
+		goto err;
+
+	clk1 = of_clk_get(np, 0);
+	if (IS_ERR(clk1))
+		clk1 = NULL;
+
+	/* Get the 2nd clock if the timer has 2 timer clocks */
+	if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
+		clk2 = of_clk_get(np, 1);
+		if (IS_ERR(clk2)) {
+			pr_err("sp804: %s clock not found: %d\n", np->name,
+				(int)PTR_ERR(clk2));
+			goto err;
+		}
+	} else
+		clk2 = clk1;
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0)
+		goto err;
+
+	of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
+	if (irq_num == 2) {
+		__sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
+		__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+	} else {
+		__sp804_clockevents_init(base, irq, clk1 , name);
+		__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
+							 name, clk2, 1);
+	}
+	initialized = true;
+
+	return;
+err:
+	iounmap(base);
+}
+CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+
+static void __init integrator_cp_of_init(struct device_node *np)
+{
+	static int init_count = 0;
+	void __iomem *base;
+	int irq;
+	const char *name = of_get_property(np, "compatible", NULL);
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return;
+
+	/* Ensure timer is disabled */
+	writel(0, base + TIMER_CTRL);
+
+	if (init_count == 2 || !of_device_is_available(np))
+		goto err;
+
+	if (!init_count)
+		sp804_clocksource_init(base, name);
+	else {
+		irq = irq_of_parse_and_map(np, 0);
+		if (irq <= 0)
+			goto err;
+
+		sp804_clockevents_init(base, irq, name);
+	}
+
+	init_count++;
+	return;
+err:
+	iounmap(base);
+}
+CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index 7ade91d..7c1bfc0 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -10,8 +10,7 @@
 #include <clocksource/arm_arch_timer.h>
 
 #ifdef CONFIG_ARM_ARCH_TIMER
-int arch_timer_of_register(void);
-int arch_timer_sched_clock_init(void);
+int arch_timer_arch_init(void);
 
 /*
  * These register accessors are marked inline so the compiler can
@@ -110,16 +109,6 @@
 
 	asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
 }
-#else
-static inline int arch_timer_of_register(void)
-{
-	return -ENXIO;
-}
-
-static inline int arch_timer_sched_clock_init(void)
-{
-	return -ENXIO;
-}
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h
index 2dd9d3f..bb28af7 100644
--- a/arch/arm/include/asm/hardware/timer-sp.h
+++ b/arch/arm/include/asm/hardware/timer-sp.h
@@ -1,15 +1,23 @@
+struct clk;
+
 void __sp804_clocksource_and_sched_clock_init(void __iomem *,
-					      const char *, int);
+					      const char *, struct clk *, int);
+void __sp804_clockevents_init(void __iomem *, unsigned int,
+			      struct clk *, const char *);
 
 static inline void sp804_clocksource_init(void __iomem *base, const char *name)
 {
-	__sp804_clocksource_and_sched_clock_init(base, name, 0);
+	__sp804_clocksource_and_sched_clock_init(base, name, NULL, 0);
 }
 
 static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
 							  const char *name)
 {
-	__sp804_clocksource_and_sched_clock_init(base, name, 1);
+	__sp804_clocksource_and_sched_clock_init(base, name, NULL, 1);
 }
 
-void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
+static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name)
+{
+	__sp804_clockevents_init(base, irq, NULL, name);
+
+}
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index e3f7572..3d520dd 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -11,4 +11,6 @@
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
 
+extern unsigned long long (*sched_clock_func)(void);
+
 #endif
diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
index d957a51..59dcdce 100644
--- a/arch/arm/kernel/arch_timer.c
+++ b/arch/arm/kernel/arch_timer.c
@@ -22,9 +22,11 @@
 	return arch_timer_read_counter();
 }
 
-static u32 arch_timer_read_counter_u32(void)
+static u32 sched_clock_mult __read_mostly;
+
+static unsigned long long notrace arch_timer_sched_clock(void)
 {
-	return arch_timer_read_counter();
+	return arch_timer_read_counter() * sched_clock_mult;
 }
 
 static struct delay_timer arch_delay_timer;
@@ -37,25 +39,20 @@
 	register_current_timer_delay(&arch_delay_timer);
 }
 
-int __init arch_timer_of_register(void)
+int __init arch_timer_arch_init(void)
 {
-	int ret;
+        u32 arch_timer_rate = arch_timer_get_rate();
 
-	ret = arch_timer_init();
-	if (ret)
-		return ret;
+	if (arch_timer_rate == 0)
+		return -ENXIO;
 
 	arch_timer_delay_timer_register();
 
-	return 0;
-}
+	/* Cache the sched_clock multiplier to save a divide in the hot path. */
+	sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
+	sched_clock_func = arch_timer_sched_clock;
+	pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n",
+		arch_timer_rate / 1000, sched_clock_mult);
 
-int __init arch_timer_sched_clock_init(void)
-{
-	if (arch_timer_get_rate() == 0)
-		return -ENXIO;
-
-	setup_sched_clock(arch_timer_read_counter_u32,
-			  32, arch_timer_get_rate());
 	return 0;
 }
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 59d2adb..e8edcaa 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -20,6 +20,7 @@
 	u64 epoch_ns;
 	u32 epoch_cyc;
 	u32 epoch_cyc_copy;
+	unsigned long rate;
 	u32 mult;
 	u32 shift;
 	bool suspended;
@@ -113,11 +114,14 @@
 	u64 res, wrap;
 	char r_unit;
 
+	if (cd.rate > rate)
+		return;
+
 	BUG_ON(bits > 32);
 	WARN_ON(!irqs_disabled());
-	WARN_ON(read_sched_clock != jiffy_sched_clock_read);
 	read_sched_clock = read;
 	sched_clock_mask = (1 << bits) - 1;
+	cd.rate = rate;
 
 	/* calculate the mult/shift to convert counter ticks to ns. */
 	clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
@@ -161,12 +165,19 @@
 	pr_debug("Registered %pF as sched_clock source\n", read);
 }
 
-unsigned long long notrace sched_clock(void)
+static unsigned long long notrace sched_clock_32(void)
 {
 	u32 cyc = read_sched_clock();
 	return cyc_to_sched_clock(cyc, sched_clock_mask);
 }
 
+unsigned long long __read_mostly (*sched_clock_func)(void) = sched_clock_32;
+
+unsigned long long notrace sched_clock(void)
+{
+	return sched_clock_func();
+}
+
 void __init sched_clock_postinit(void)
 {
 	/*
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 955d92d..abff4e9 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/profile.h>
 #include <linux/timer.h>
+#include <linux/clocksource.h>
 #include <linux/irq.h>
 
 #include <asm/thread_info.h>
@@ -115,6 +116,10 @@
 
 void __init time_init(void)
 {
-	machine_desc->init_time();
+	if (machine_desc->init_time)
+		machine_desc->init_time();
+	else
+		clocksource_of_init();
+
 	sched_clock_postinit();
 }
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 48f1228..69f9e3b 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -36,6 +36,8 @@
 		at91rm9200_standby();
 	else if (cpu_is_at91sam9g45())
 		at91sam9g45_standby();
+	else if (cpu_is_at91sam9263())
+		at91sam9263_standby();
 	else
 		at91sam9_standby();
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0f3379f..d3d7b99 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -86,7 +86,7 @@
 	AT91_SOC_SAMA5D3,
 
 	/* Unknown type */
-	AT91_SOC_NONE
+	AT91_SOC_UNKNOWN,
 };
 
 enum at91_soc_subtype {
@@ -107,8 +107,11 @@
 	AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
 	AT91_SOC_SAMA5D35,
 
+	/* No subtype for this SoC */
+	AT91_SOC_SUBTYPE_NONE,
+
 	/* Unknown subtype */
-	AT91_SOC_SUBTYPE_NONE
+	AT91_SOC_SUBTYPE_UNKNOWN,
 };
 
 struct at91_socinfo {
@@ -122,7 +125,7 @@
 
 static inline int at91_soc_is_detected(void)
 {
-	return at91_soc_initdata.type != AT91_SOC_NONE;
+	return at91_soc_initdata.type != AT91_SOC_UNKNOWN;
 }
 
 #ifdef CONFIG_SOC_AT91RM9200
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 73f1f25..530db30 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -270,6 +270,8 @@
 				at91rm9200_standby();
 			else if (cpu_is_at91sam9g45())
 				at91sam9g45_standby();
+			else if (cpu_is_at91sam9263())
+				at91sam9263_standby();
 			else
 				at91sam9_standby();
 			break;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 38f467c..2f5908f 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -70,13 +70,31 @@
 	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
-#ifdef CONFIG_SOC_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
  */
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
+static inline void at91sam9263_standby(void)
+{
+	u32 lpr0, lpr1;
+	u32 saved_lpr0, saved_lpr1;
+
+	saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+	lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+	lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+	lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+	at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+	at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
+}
 
 static inline void at91sam9_standby(void)
 {
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index e8491e7..e2f4bdd 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -105,28 +105,32 @@
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
-		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
 			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 		at91_boot_soc = at91rm9200_soc;
 		break;
 
 	case ARCH_ID_AT91SAM9260:
 		at91_soc_initdata.type = AT91_SOC_SAM9260;
+		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 		at91_boot_soc = at91sam9260_soc;
 		break;
 
 	case ARCH_ID_AT91SAM9261:
 		at91_soc_initdata.type = AT91_SOC_SAM9261;
+		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 		at91_boot_soc = at91sam9261_soc;
 		break;
 
 	case ARCH_ID_AT91SAM9263:
 		at91_soc_initdata.type = AT91_SOC_SAM9263;
+		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 		at91_boot_soc = at91sam9263_soc;
 		break;
 
 	case ARCH_ID_AT91SAM9G20:
 		at91_soc_initdata.type = AT91_SOC_SAM9G20;
+		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 		at91_boot_soc = at91sam9260_soc;
 		break;
 
@@ -139,6 +143,7 @@
 
 	case ARCH_ID_AT91SAM9RL64:
 		at91_soc_initdata.type = AT91_SOC_SAM9RL;
+		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 		at91_boot_soc = at91sam9rl_soc;
 		break;
 
@@ -161,6 +166,7 @@
 	/* at91sam9g10 */
 	if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
 		at91_soc_initdata.type = AT91_SOC_SAM9G10;
+		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 		at91_boot_soc = at91sam9261_soc;
 	}
 	/* at91sam9xe */
@@ -242,7 +248,7 @@
 	[AT91_SOC_SAM9X5]	= "at91sam9x5",
 	[AT91_SOC_SAM9N12]	= "at91sam9n12",
 	[AT91_SOC_SAMA5D3]	= "sama5d3",
-	[AT91_SOC_NONE]		= "Unknown"
+	[AT91_SOC_UNKNOWN]	= "Unknown",
 };
 
 const char *at91_get_soc_type(struct at91_socinfo *c)
@@ -268,7 +274,8 @@
 	[AT91_SOC_SAMA5D33]	= "sama5d33",
 	[AT91_SOC_SAMA5D34]	= "sama5d34",
 	[AT91_SOC_SAMA5D35]	= "sama5d35",
-	[AT91_SOC_SUBTYPE_NONE]	= "Unknown"
+	[AT91_SOC_SUBTYPE_NONE]	= "None",
+	[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
 };
 
 const char *at91_get_soc_subtype(struct at91_socinfo *c)
@@ -282,8 +289,8 @@
 	/* Map peripherals */
 	iotable_init(&at91_io_desc, 1);
 
-	at91_soc_initdata.type = AT91_SOC_NONE;
-	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
+	at91_soc_initdata.type = AT91_SOC_UNKNOWN;
+	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
 
 	soc_detect(AT91_BASE_DBGU0);
 	if (!at91_soc_is_detected())
@@ -294,8 +301,9 @@
 
 	pr_info("AT91: Detected soc type: %s\n",
 		at91_get_soc_type(&at91_soc_initdata));
-	pr_info("AT91: Detected soc subtype: %s\n",
-		at91_get_soc_subtype(&at91_soc_initdata));
+	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
+		pr_info("AT91: Detected soc subtype: %s\n",
+			at91_get_soc_subtype(&at91_soc_initdata));
 
 	if (!at91_soc_is_enabled())
 		panic("AT91: Soc not enabled");
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 76c1170..e7df2dd 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -15,6 +15,7 @@
  */
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -28,12 +29,9 @@
 #include <linux/amba/bus.h>
 #include <linux/clk-provider.h>
 
-#include <asm/arch_timer.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/smp_plat.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -90,36 +88,16 @@
 #endif
 }
 
-static struct clk_lookup lookup = {
-	.dev_id = "sp804",
-	.con_id = NULL,
-};
-
 static void __init highbank_timer_init(void)
 {
-	int irq;
 	struct device_node *np;
-	void __iomem *timer_base;
 
 	/* Map system registers */
 	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
 	sregs_base = of_iomap(np, 0);
 	WARN_ON(!sregs_base);
 
-	np = of_find_compatible_node(NULL, NULL, "arm,sp804");
-	timer_base = of_iomap(np, 0);
-	WARN_ON(!timer_base);
-	irq = irq_of_parse_and_map(np, 0);
-
 	of_clk_init(NULL);
-	lookup.clk = of_clk_get(np, 0);
-	clkdev_add(&lookup);
-
-	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
-	sp804_clockevents_init(timer_base, irq, "timer0");
-
-	arch_timer_of_register();
-	arch_timer_sched_clock_init();
 
 	clocksource_of_init();
 }
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index da1091b..8c60fcb 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -250,39 +250,6 @@
 }
 
 #ifdef CONFIG_OF
-
-static void __init cp_of_timer_init(void)
-{
-	struct device_node *node;
-	const char *path;
-	void __iomem *base;
-	int err;
-	int irq;
-
-	err = of_property_read_string(of_aliases,
-				"arm,timer-primary", &path);
-	if (WARN_ON(err))
-		return;
-	node = of_find_node_by_path(path);
-	base = of_iomap(node, 0);
-	if (WARN_ON(!base))
-		return;
-	writel(0, base + TIMER_CTRL);
-	sp804_clocksource_init(base, node->name);
-
-	err = of_property_read_string(of_aliases,
-				"arm,timer-secondary", &path);
-	if (WARN_ON(err))
-		return;
-	node = of_find_node_by_path(path);
-	base = of_iomap(node, 0);
-	if (WARN_ON(!base))
-		return;
-	irq = irq_of_parse_and_map(node, 0);
-	writel(0, base + TIMER_CTRL);
-	sp804_clockevents_init(base, irq, node->name);
-}
-
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -383,7 +350,6 @@
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq_of,
 	.handle_irq	= fpga_handle_irq,
-	.init_time	= cp_of_timer_init,
 	.init_machine	= intcp_init_of,
 	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index ba769e0..2d04f0e 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -5,6 +5,6 @@
 
 obj-y				 += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
-obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o
+obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 12d3655..42a4cb3 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -20,6 +20,8 @@
 #include <linux/clk/mvebu.h>
 #include <linux/dma-mapping.h>
 #include <linux/mbus.h>
+#include <linux/irqchip.h>
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -72,6 +74,10 @@
 			ARMADA_370_XP_MBUS_WINS_SIZE,
 			ARMADA_370_XP_SDRAM_WINS_BASE,
 			ARMADA_370_XP_SDRAM_WINS_SIZE);
+
+#ifdef CONFIG_CACHE_L2X0
+	l2x0_of_init(0, ~0UL);
+#endif
 }
 
 static void __init armada_370_xp_dt_init(void)
@@ -90,8 +96,7 @@
 	.init_machine	= armada_370_xp_dt_init,
 	.map_io		= armada_370_xp_map_io,
 	.init_early	= armada_370_xp_init_early,
-	.init_irq	= armada_370_xp_init_irq,
-	.handle_irq     = armada_370_xp_handle_irq,
+	.init_irq	= irqchip_init,
 	.init_time	= armada_370_xp_timer_and_clk_init,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_370_xp_dt_compat,
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 5b86423..244d8a5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -108,24 +108,13 @@
 #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
 #define SDP2430_LCD_PANEL_ENABLE_GPIO		154
 
-static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
-	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
-	return 0;
-}
-
-static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
-	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
 static struct panel_generic_dpi_data sdp2430_panel_data = {
 	.name			= "nec_nl2432dr22-11b",
-	.platform_enable	= sdp2430_panel_enable_lcd,
-	.platform_disable	= sdp2430_panel_disable_lcd,
+	.num_gpios		= 2,
+	.gpios			= {
+		SDP2430_LCD_PANEL_ENABLE_GPIO,
+		SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
+	},
 };
 
 static struct omap_dss_device sdp2430_lcd_device = {
@@ -146,26 +135,6 @@
 	.default_device	= &sdp2430_lcd_device,
 };
 
-static void __init sdp2430_display_init(void)
-{
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{ SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
-			"LCD reset" },
-		{ SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
-			"LCD Backlight" },
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
-
-	omap_display_init(&sdp2430_dss_data);
-}
-
 #if IS_ENABLED(CONFIG_SMC91X)
 
 static struct omap_smc91x_platform_data board_smc91x_data = {
@@ -273,7 +242,7 @@
 	gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
 			 "Secondary LCD backlight");
 
-	sdp2430_display_init();
+	omap_display_init(&sdp2430_dss_data);
 }
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index a4d4664..23b004a 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -108,53 +108,38 @@
 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
 #define SDP3430_LCD_PANEL_ENABLE_GPIO		5
 
-static struct gpio sdp3430_dss_gpios[] __initdata = {
-	{SDP3430_LCD_PANEL_ENABLE_GPIO,    GPIOF_OUT_INIT_LOW, "LCD reset"    },
-	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
-};
-
 static void __init sdp3430_display_init(void)
 {
 	int r;
 
-	r = gpio_request_array(sdp3430_dss_gpios,
-			       ARRAY_SIZE(sdp3430_dss_gpios));
+	/*
+	 * the backlight GPIO doesn't directly go to the panel, it enables
+	 * an internal circuit on 3430sdp to create the signal V_BKL_28V,
+	 * this is connected to LED+ pin of the sharp panel. This GPIO
+	 * is left enabled in the board file, and not passed to the panel
+	 * as platform_data.
+	 */
+	r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
+				GPIOF_OUT_INIT_HIGH, "LCD Backlight");
 	if (r)
-		printk(KERN_ERR "failed to get LCD control GPIOs\n");
+		pr_err("failed to get LCD Backlight GPIO\n");
 
 }
 
-static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
-	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
-	return 0;
-}
-
-static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
-	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
-static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
+static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
+	.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
+	.ini_gpio = -1,
+	.mo_gpio = -1,
+	.lr_gpio = -1,
+	.ud_gpio = -1,
+};
 
 static struct omap_dss_device sdp3430_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "sharp_ls_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines	= 16,
-	.platform_enable	= sdp3430_panel_enable_lcd,
-	.platform_disable	= sdp3430_panel_disable_lcd,
+	.data			= &sdp3430_lcd_data,
 };
 
 static struct tfp410_platform_data dvi_panel = {
@@ -175,8 +160,6 @@
 	.driver_name		= "venc",
 	.type			= OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= sdp3430_panel_enable_tv,
-	.platform_disable	= sdp3430_panel_disable_tv,
 };
 
 
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 00d7290..56a9a4f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -730,7 +730,7 @@
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
-	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+	usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index c29d2e7..d63f14b 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -120,63 +120,14 @@
 	return 0;
 }
 
-static int lcd_enabled;
-static int dvi_enabled;
-
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
-		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-static struct gpio am3517_evm_dss_gpios[] __initdata = {
-	/* GPIO 182 = LCD Backlight Power */
-	{ LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" },
-	/* GPIO 181 = LCD Panel PWM */
-	{ LCD_PANEL_PWM,	 GPIOF_OUT_INIT_HIGH, "lcd bl enable"	  },
-	/* GPIO 176 = LCD Panel Power enable pin */
-	{ LCD_PANEL_PWR,	 GPIOF_OUT_INIT_HIGH, "dvi enable"	  },
-};
-
-static void __init am3517_evm_display_init(void)
-{
-	int r;
-
-	omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
-	omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
-
-	r = gpio_request_array(am3517_evm_dss_gpios,
-			       ARRAY_SIZE(am3517_evm_dss_gpios));
-	if (r) {
-		printk(KERN_ERR "failed to get DSS panel control GPIOs\n");
-		return;
-	}
-
-	printk(KERN_INFO "Display initialized successfully\n");
-}
-#else
-static void __init am3517_evm_display_init(void) {}
-#endif
-
-static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(LCD_PANEL_PWR, 1);
-	lcd_enabled = 1;
-
-	return 0;
-}
-
-static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(LCD_PANEL_PWR, 0);
-	lcd_enabled = 0;
-}
-
 static struct panel_generic_dpi_data lcd_panel = {
 	.name			= "sharp_lq",
-	.platform_enable	= am3517_evm_panel_enable_lcd,
-	.platform_disable	= am3517_evm_panel_disable_lcd,
+	.num_gpios		= 3,
+	.gpios			= {
+		LCD_PANEL_PWR,
+		LCD_PANEL_BKLIGHT_PWR,
+		LCD_PANEL_PWM,
+	},
 };
 
 static struct omap_dss_device am3517_evm_lcd_device = {
@@ -187,22 +138,11 @@
 	.phy.dpi.data_lines 	= 16,
 };
 
-static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
 static struct omap_dss_device am3517_evm_tv_device = {
 	.type 			= OMAP_DISPLAY_TYPE_VENC,
 	.name 			= "tv",
 	.driver_name		= "venc",
 	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= am3517_evm_panel_enable_tv,
-	.platform_disable	= am3517_evm_panel_disable_tv,
 };
 
 static struct tfp410_platform_data dvi_panel = {
@@ -365,8 +305,6 @@
 	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
-	/* DSS */
-	am3517_evm_display_init();
 
 	/* RTC - S35390A */
 	am3517_evm_rtc_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e0ed8c0..ee6218c 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -190,45 +190,12 @@
 #define CM_T35_LCD_BL_GPIO 58
 #define CM_T35_DVI_EN_GPIO 54
 
-static int lcd_enabled;
-static int dvi_enabled;
-
-static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
-	gpio_set_value(CM_T35_LCD_BL_GPIO, 1);
-
-	lcd_enabled = 1;
-
-	return 0;
-}
-
-static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	lcd_enabled = 0;
-
-	gpio_set_value(CM_T35_LCD_BL_GPIO, 0);
-	gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
-}
-
-static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
 static struct panel_generic_dpi_data lcd_panel = {
 	.name			= "toppoly_tdo35s",
-	.platform_enable	= cm_t35_panel_enable_lcd,
-	.platform_disable	= cm_t35_panel_disable_lcd,
+	.num_gpios		= 1,
+	.gpios			= {
+		CM_T35_LCD_BL_GPIO,
+	},
 };
 
 static struct omap_dss_device cm_t35_lcd_device = {
@@ -257,8 +224,6 @@
 	.driver_name		= "venc",
 	.type			= OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= cm_t35_panel_enable_tv,
-	.platform_disable	= cm_t35_panel_disable_tv,
 };
 
 static struct omap_dss_device *cm_t35_dss_devices[] = {
@@ -292,11 +257,6 @@
 	},
 };
 
-static struct gpio cm_t35_dss_gpios[] __initdata = {
-	{ CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,  "lcd enable"    },
-	{ CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW,  "lcd bl enable" },
-};
-
 static void __init cm_t35_init_display(void)
 {
 	int err;
@@ -304,23 +264,21 @@
 	spi_register_board_info(cm_t35_lcd_spi_board_info,
 				ARRAY_SIZE(cm_t35_lcd_spi_board_info));
 
-	err = gpio_request_array(cm_t35_dss_gpios,
-				 ARRAY_SIZE(cm_t35_dss_gpios));
+
+	err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
+			"lcd bl enable");
 	if (err) {
-		pr_err("CM-T35: failed to request DSS control GPIOs\n");
+		pr_err("CM-T35: failed to request LCD EN GPIO\n");
 		return;
 	}
 
-	gpio_export(CM_T35_LCD_EN_GPIO, 0);
-	gpio_export(CM_T35_LCD_BL_GPIO, 0);
-
 	msleep(50);
 	gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
 
 	err = omap_display_init(&cm_t35_dss_data);
 	if (err) {
 		pr_err("CM-T35: failed to register DSS device\n");
-		gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios));
+		gpio_free(CM_T35_LCD_EN_GPIO);
 	}
 }
 
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e44b804..5764205 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -103,19 +103,6 @@
 	{}	/* Terminator */
 };
 
-static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
 static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -127,8 +114,7 @@
 
 static struct panel_generic_dpi_data lcd_panel = {
 	.name			= "innolux_at070tn83",
-	.platform_enable        = devkit8000_panel_enable_lcd,
-	.platform_disable       = devkit8000_panel_disable_lcd,
+	/* gpios filled in code */
 };
 
 static struct omap_dss_device devkit8000_lcd_device = {
@@ -210,8 +196,6 @@
 static int devkit8000_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	int ret;
-
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
 	omap_hsmmc_late_init(mmc);
@@ -220,13 +204,8 @@
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
-	devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
-	ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
-			       GPIOF_OUT_INIT_LOW, "LCD_PWREN");
-	if (ret < 0) {
-		devkit8000_lcd_device.reset_gpio = -EINVAL;
-		printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
-	}
+	lcd_panel.num_gpios = 1;
+	lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0;
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
 	dvi_panel.power_down_gpio = gpio + 7;
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 8a8e505..d0d17bc 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -181,34 +181,13 @@
 
 /* LCD */
 
-static int ldp_backlight_gpio;
-static int ldp_lcd_enable_gpio;
-
 #define LCD_PANEL_RESET_GPIO		55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(ldp_lcd_enable_gpio))
-		gpio_direction_output(ldp_lcd_enable_gpio, 1);
-	if (gpio_is_valid(ldp_backlight_gpio))
-		gpio_direction_output(ldp_backlight_gpio, 1);
-
-	return 0;
-}
-
-static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(ldp_lcd_enable_gpio))
-		gpio_direction_output(ldp_lcd_enable_gpio, 0);
-	if (gpio_is_valid(ldp_backlight_gpio))
-		gpio_direction_output(ldp_backlight_gpio, 0);
-}
-
 static struct panel_generic_dpi_data ldp_panel_data = {
 	.name			= "nec_nl2432dr22-11b",
-	.platform_enable	= ldp_panel_enable_lcd,
-	.platform_disable	= ldp_panel_disable_lcd,
+	.num_gpios		= 4,
+	/* gpios filled in code */
 };
 
 static struct omap_dss_device ldp_lcd_device = {
@@ -231,41 +210,19 @@
 
 static void __init ldp_display_init(void)
 {
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
-		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
+	ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
+	ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
 
 	omap_display_init(&ldp_dss_data);
 }
 
 static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 {
-	int r;
+	ldp_panel_data.gpios[0] = gpio + 7;
+	ldp_panel_data.gpio_invert[0] = true;
 
-	struct gpio gpios[] = {
-		{gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
-		{gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		ldp_backlight_gpio = -EINVAL;
-		ldp_lcd_enable_gpio = -EINVAL;
-		return r;
-	}
-
-	ldp_backlight_gpio = gpio + 15;
-	ldp_lcd_enable_gpio = gpio + 7;
+	ldp_panel_data.gpios[1] = gpio + 15;
+	ldp_panel_data.gpio_invert[1] = true;
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4f1bbc3..f76d0de 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -155,61 +155,43 @@
 #define OMAP3EVM_LCD_PANEL_LR		2
 #define OMAP3EVM_LCD_PANEL_UD		3
 #define OMAP3EVM_LCD_PANEL_INI		152
-#define OMAP3EVM_LCD_PANEL_ENVDD	153
 #define OMAP3EVM_LCD_PANEL_QVGA		154
 #define OMAP3EVM_LCD_PANEL_RESB		155
+
+#define OMAP3EVM_LCD_PANEL_ENVDD	153
 #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
+
+/*
+ * OMAP3EVM DVI control signals
+ */
 #define OMAP3EVM_DVI_PANEL_EN_GPIO	199
 
-static struct gpio omap3_evm_dss_gpios[] __initdata = {
-	{ OMAP3EVM_LCD_PANEL_RESB,  GPIOF_OUT_INIT_HIGH, "lcd_panel_resb"  },
-	{ OMAP3EVM_LCD_PANEL_INI,   GPIOF_OUT_INIT_HIGH, "lcd_panel_ini"   },
-	{ OMAP3EVM_LCD_PANEL_QVGA,  GPIOF_OUT_INIT_LOW,  "lcd_panel_qvga"  },
-	{ OMAP3EVM_LCD_PANEL_LR,    GPIOF_OUT_INIT_HIGH, "lcd_panel_lr"    },
-	{ OMAP3EVM_LCD_PANEL_UD,    GPIOF_OUT_INIT_HIGH, "lcd_panel_ud"    },
-	{ OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,  "lcd_panel_envdd" },
+static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
+	.resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
+	.ini_gpio = OMAP3EVM_LCD_PANEL_INI,
+	.mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
+	.lr_gpio = OMAP3EVM_LCD_PANEL_LR,
+	.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
 };
 
-static int lcd_enabled;
-static int dvi_enabled;
-
 static void __init omap3_evm_display_init(void)
 {
 	int r;
 
-	r = gpio_request_array(omap3_evm_dss_gpios,
-			       ARRAY_SIZE(omap3_evm_dss_gpios));
+	r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,
+				"lcd_panel_envdd");
 	if (r)
-		printk(KERN_ERR "failed to get lcd_panel_* gpios\n");
-}
+		pr_err("failed to get lcd_panel_envdd GPIO\n");
 
-static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+	r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO,
+				GPIOF_OUT_INIT_LOW, "lcd_panel_bklight");
+	if (r)
+		pr_err("failed to get lcd_panel_bklight GPIO\n");
 
 	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
 		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
 	else
 		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-
-	lcd_enabled = 1;
-	return 0;
-}
-
-static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-	else
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-
-	lcd_enabled = 0;
 }
 
 static struct omap_dss_device omap3_evm_lcd_device = {
@@ -217,26 +199,14 @@
 	.driver_name		= "sharp_ls_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines	= 18,
-	.platform_enable	= omap3_evm_enable_lcd,
-	.platform_disable	= omap3_evm_disable_lcd,
+	.data			= &omap3_evm_lcd_data,
 };
 
-static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
 static struct omap_dss_device omap3_evm_tv_device = {
 	.name			= "tv",
 	.driver_name		= "venc",
 	.type			= OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= omap3_evm_enable_tv,
-	.platform_disable	= omap3_evm_disable_tv,
 };
 
 static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1004d2a..28133d5 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -44,6 +44,7 @@
 
 #include "common.h"
 #include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #include "mux.h"
@@ -230,12 +231,16 @@
 	.rep		= 1,
 };
 
+static struct panel_tpo_td043_data lcd_data = {
+	.nreset_gpio		= 157,
+};
+
 static struct omap_dss_device pandora_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "tpo_td043mtea1_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines	= 24,
-	.reset_gpio		= 157,
+	.data			= &lcd_data,
 };
 
 static struct omap_dss_device pandora_tv_device = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8afbba0..d37e6b1 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -94,15 +94,6 @@
 	return;
 }
 
-static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
 static struct omap_dss_device omap3_stalker_tv_device = {
 	.name			= "tv",
 	.driver_name		= "venc",
@@ -112,8 +103,6 @@
 #elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
 	.u.venc.type		= OMAP_DSS_VENC_TYPE_COMPOSITE,
 #endif
-	.platform_enable	= omap3_stalker_enable_tv,
-	.platform_disable	= omap3_stalker_disable_tv,
 };
 
 static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index a71ad34..1e2c75e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -435,7 +435,7 @@
 	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
-	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+	usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f910140..4ca6b68 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -145,28 +145,9 @@
 #endif
 
 /* DSS */
-static int lcd_enabled;
-static int dvi_enabled;
-
 #define OVERO_GPIO_LCD_EN 144
 #define OVERO_GPIO_LCD_BL 145
 
-static struct gpio overo_dss_gpios[] __initdata = {
-	{ OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
-	{ OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
-};
-
-static void __init overo_display_init(void)
-{
-	if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
-		printk(KERN_ERR "could not obtain DSS control GPIOs\n");
-		return;
-	}
-
-	gpio_export(OVERO_GPIO_LCD_EN, 0);
-	gpio_export(OVERO_GPIO_LCD_BL, 0);
-}
-
 static struct tfp410_platform_data dvi_panel = {
 	.i2c_bus_num		= 3,
 	.power_down_gpio	= -1,
@@ -187,30 +168,13 @@
 	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
 };
 
-static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
-	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
-	lcd_enabled = 1;
-	return 0;
-}
-
-static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
-	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
-	lcd_enabled = 0;
-}
-
 static struct panel_generic_dpi_data lcd43_panel = {
 	.name			= "samsung_lte430wq_f0c",
-	.platform_enable	= overo_panel_enable_lcd,
-	.platform_disable	= overo_panel_disable_lcd,
+	.num_gpios		= 2,
+	.gpios			= {
+		OVERO_GPIO_LCD_EN,
+		OVERO_GPIO_LCD_BL
+	},
 };
 
 static struct omap_dss_device overo_lcd43_device = {
@@ -223,13 +187,20 @@
 
 #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
 	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+static struct panel_generic_dpi_data lcd35_panel = {
+	.num_gpios		= 2,
+	.gpios			= {
+		OVERO_GPIO_LCD_EN,
+		OVERO_GPIO_LCD_BL
+	},
+};
+
 static struct omap_dss_device overo_lcd35_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "lcd35",
 	.driver_name		= "lgphilips_lb035q02_panel",
 	.phy.dpi.data_lines	= 24,
-	.platform_enable	= overo_panel_enable_lcd,
-	.platform_disable	= overo_panel_disable_lcd,
+	.data			= &lcd35_panel,
 };
 #endif
 
@@ -508,7 +479,6 @@
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
 	overo_init_smsc911x();
-	overo_display_init();
 	overo_init_led();
 	overo_init_keys();
 	omap_twl4030_audio_init("overo", NULL);
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index eb66726..bd74f9f 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -16,6 +16,8 @@
 #include <linux/mm.h>
 #include <asm/mach-types.h>
 #include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "soc.h"
@@ -27,25 +29,16 @@
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
 
-static int rx51_lcd_enable(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void rx51_lcd_disable(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 0);
-}
+static struct panel_acx565akm_data lcd_data = {
+	.reset_gpio	= RX51_LCD_RESET_GPIO,
+};
 
 static struct omap_dss_device rx51_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "panel-acx565akm",
 	.type			= OMAP_DISPLAY_TYPE_SDI,
 	.phy.sdi.datapairs	= 2,
-	.reset_gpio		= RX51_LCD_RESET_GPIO,
-	.platform_enable	= rx51_lcd_enable,
-	.platform_disable	= rx51_lcd_disable,
+	.data			= &lcd_data,
 };
 
 static struct omap_dss_device  rx51_tv_device = {
@@ -76,13 +69,8 @@
 		return 0;
 	}
 
-	if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
-			     "LCD ACX565AKM reset")) {
-		pr_err("%s failed to get LCD Reset GPIO\n", __func__);
-		return 0;
-	}
-
 	omap_display_init(&rx51_dss_board_info);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 9a7174f..c2a079c 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -15,8 +15,9 @@
 #include <linux/spi/spi.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
-#include "board-zoom.h"
+#include <video/omap-panel-data.h>
 
+#include "board-zoom.h"
 #include "soc.h"
 #include "common.h"
 
@@ -24,37 +25,17 @@
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static struct gpio zoom_lcd_gpios[] __initdata = {
-	{ -EINVAL,		GPIOF_OUT_INIT_HIGH, "lcd reset" },
-	{ LCD_PANEL_QVGA_GPIO,	GPIOF_OUT_INIT_HIGH, "lcd qvga"	 },
+static struct panel_nec_nl8048_data zoom_lcd_data = {
+	/* res_gpio filled in code */
+	.qvga_gpio = LCD_PANEL_QVGA_GPIO,
 };
 
-static void __init zoom_lcd_panel_init(void)
-{
-	zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
-			LCD_PANEL_RESET_GPIO_PROD :
-			LCD_PANEL_RESET_GPIO_PILOT;
-
-	if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios)))
-		pr_err("%s: Failed to get LCD GPIOs.\n", __func__);
-}
-
-static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-}
-
 static struct omap_dss_device zoom_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "NEC_8048_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines	= 24,
-	.platform_enable	= zoom_panel_enable_lcd,
-	.platform_disable	= zoom_panel_disable_lcd,
+	.data			= &zoom_lcd_data,
 };
 
 static struct omap_dss_device *zoom_dss_devices[] = {
@@ -67,6 +48,13 @@
 	.default_device		= &zoom_lcd_device,
 };
 
+static void __init zoom_lcd_panel_init(void)
+{
+	zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
+			LCD_PANEL_RESET_GPIO_PROD :
+			LCD_PANEL_RESET_GPIO_PILOT;
+}
+
 static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
 	.turbo_mode		= 1,
 };
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 9c49bbe..393aeef 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -52,7 +52,6 @@
 	.driver_name		= "tfp410",
 	.data			= &omap4_dvi_panel,
 	.phy.dpi.data_lines	= 24,
-	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
@@ -177,45 +176,12 @@
 	.pwrgood_gpio		= 45,
 };
 
-static void sdp4430_picodlp_init(void)
-{
-	int r;
-	const struct gpio picodlp_gpios[] = {
-		{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-			"DLP POWER ON"},
-		{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
-			"DLP EMU DONE"},
-		{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
-			"DLP PWRGOOD"},
-	};
-
-	r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
-	if (r)
-		pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
-}
-
-static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DISPLAY_SEL_GPIO, 0);
-	gpio_set_value(DLP_POWER_ON_GPIO, 1);
-
-	return 0;
-}
-
-static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DLP_POWER_ON_GPIO, 0);
-	gpio_set_value(DISPLAY_SEL_GPIO, 1);
-}
-
 static struct omap_dss_device sdp4430_picodlp_device = {
 	.name			= "picodlp",
 	.driver_name		= "picodlp_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines	= 24,
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
-	.platform_enable	= sdp4430_panel_enable_picodlp,
-	.platform_disable	= sdp4430_panel_disable_picodlp,
 	.data			= &sdp4430_picodlp_pdata,
 };
 
@@ -232,17 +198,26 @@
 	.default_device	= &sdp4430_lcd_device,
 };
 
+/*
+ * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
+ * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
+ * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
+ * selected by default
+ */
 void __init omap_4430sdp_display_init(void)
 {
 	int r;
 
-	/* Enable LCD2 by default (instead of Pico DLP) */
 	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
 			"display_sel");
 	if (r)
 		pr_err("%s: Could not get display_sel GPIO\n", __func__);
 
-	sdp4430_picodlp_init();
+	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+		"DLP POWER ON");
+	if (r)
+		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+
 	omap_display_init(&sdp4430_dss_data);
 	/*
 	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
@@ -262,12 +237,15 @@
 {
 	int r;
 
-	/* Enable LCD2 by default (instead of Pico DLP) */
 	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
 			"display_sel");
 	if (r)
 		pr_err("%s: Could not get display_sel GPIO\n", __func__);
 
-	sdp4430_picodlp_init();
+	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+		"DLP POWER ON");
+	if (r)
+		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+
 	omap_display_init(&sdp4430_dss_data);
 }
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 02e1d56..0548149 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -46,7 +46,6 @@
 #include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 
-#include <asm/arch_timer.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/counter-32k.h>
@@ -627,14 +626,10 @@
 #ifdef CONFIG_SOC_OMAP5
 void __init omap5_realtime_timer_init(void)
 {
-	int err;
-
 	omap4_sync32k_timer_init();
 	realtime_counter_init();
 
-	err = arch_timer_of_register();
-	if (err)
-		pr_err("%s: arch_timer_register failed %d\n", __func__, err);
+	clocksource_of_init();
 }
 #endif /* CONFIG_SOC_OMAP5 */
 
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index c254782..c016ccd 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -90,6 +90,5 @@
 	.init_irq	= emev2_init_irq,
 	.init_machine	= kzm9d_add_standard_devices,
 	.init_late	= shmobile_init_late,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9d_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index e4545c1..899a86c 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -456,7 +456,6 @@
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= irqchip_init,
 	.init_machine	= emev2_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 228d7ab..326a4ab 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -1030,7 +1030,6 @@
 	.init_early	= r8a7740_add_early_devices_dt,
 	.init_irq	= r8a7740_init_irq,
 	.init_machine	= r8a7740_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 59c7146..5502d62 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1175,7 +1175,6 @@
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= sh7372_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= sh7372_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index e8cd93a..fdf3894 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -1037,7 +1037,6 @@
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= irqchip_init,
 	.init_machine	= sh73a0_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 3d16d4d..f321dbe 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -19,10 +19,8 @@
  *
  */
 #include <linux/platform_device.h>
+#include <linux/clocksource.h>
 #include <linux/delay.h>
-#include <asm/arch_timer.h>
-#include <asm/mach/time.h>
-#include <asm/smp_twd.h>
 
 void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 				 unsigned int mult, unsigned int div)
@@ -63,6 +61,5 @@
 
 void __init shmobile_timer_init(void)
 {
-	arch_timer_of_register();
-	arch_timer_sched_clock_init();
+	clocksource_of_init();
 }
diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile
index af9bffb..a946c19 100644
--- a/arch/arm/mach-spear/Makefile
+++ b/arch/arm/mach-spear/Makefile
@@ -7,10 +7,10 @@
 # Common support
 obj-y	:= restart.o time.o
 
-obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+smp-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
-obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o $(smp-y)
 obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
 obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o
 
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index 8ba7e75..a9fd453 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -22,11 +22,6 @@
 extern void spear3xx_timer_init(void);
 extern struct pl022_ssp_controller pl022_plat_data;
 extern struct pl08x_platform_data pl080_plat_data;
-extern struct dw_dma_platform_data dmac_plat_data;
-extern struct dw_dma_slave cf_dma_priv;
-extern struct dw_dma_slave nand_read_dma_priv;
-extern struct dw_dma_slave nand_write_dma_priv;
-bool dw_dma_filter(struct dma_chan *chan, void *slave);
 
 void __init spear_setup_of_timer(void);
 void __init spear3xx_clk_init(void __iomem *misc_base,
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index 374ddc3..cf3a536 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -82,8 +82,6 @@
 #define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
 
 /* others */
-#define DMAC0_BASE				UL(0xEA800000)
-#define DMAC1_BASE				UL(0xEB000000)
 #define MCIF_CF_BASE				UL(0xB2800000)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index ed3b5c2..9eaac2c 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -23,40 +23,12 @@
 #include <mach/spear.h>
 
 /* Base addresses */
-#define SPEAR1310_SSP1_BASE			UL(0x5D400000)
-#define SPEAR1310_SATA0_BASE			UL(0xB1000000)
-#define SPEAR1310_SATA1_BASE			UL(0xB1800000)
-#define SPEAR1310_SATA2_BASE			UL(0xB4000000)
-
 #define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
 #define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
 
-static struct arasan_cf_pdata cf_pdata = {
-	.cf_if_clk = CF_IF_CLK_166M,
-	.quirk = CF_BROKEN_UDMA,
-	.dma_priv = &cf_dma_priv,
-};
-
-/* ssp device registration */
-static struct pl022_ssp_controller ssp1_plat_data = {
-	.enable_dma = 0,
-};
-
-/* Add SPEAr1310 auxdata to pass platform data */
-static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
-	OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
-	{}
-};
-
 static void __init spear1310_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear1310_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const spear1310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 75e3864..a04a7fe 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -16,18 +16,16 @@
 #include <linux/ahci_platform.h>
 #include <linux/amba/serial.h>
 #include <linux/delay.h>
-#include <linux/dw_dmac.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
 #include <asm/mach/arch.h>
 #include "generic.h"
 #include <mach/spear.h>
 
-#include "spear13xx-dma.h"
+/* FIXME: Move SATA PHY code into a standalone driver */
 
 /* Base addresses */
 #define SPEAR1340_SATA_BASE			UL(0xB1000000)
-#define SPEAR1340_UART1_BASE			UL(0xB4100000)
 
 /* Power Management Registers */
 #define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
@@ -79,28 +77,6 @@
 			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
 			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
 
-static struct dw_dma_slave uart1_dma_param[] = {
-	{
-		/* Tx */
-		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
-		.cfg_lo = 0,
-		.src_master = DMA_MASTER_MEMORY,
-		.dst_master = SPEAR1340_DMA_MASTER_UART1,
-	}, {
-		/* Rx */
-		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
-		.cfg_lo = 0,
-		.src_master = SPEAR1340_DMA_MASTER_UART1,
-		.dst_master = DMA_MASTER_MEMORY,
-	}
-};
-
-static struct amba_pl011_data uart1_data = {
-	.dma_filter = dw_dma_filter,
-	.dma_tx_param = &uart1_dma_param[0],
-	.dma_rx_param = &uart1_dma_param[1],
-};
-
 /* SATA device registration */
 static int sata_miphy_init(struct device *dev, void __iomem *addr)
 {
@@ -159,14 +135,8 @@
 
 /* Add SPEAr1340 auxdata to pass platform data */
 static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
 	OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
 			&sata_pdata),
-	OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
 	{}
 };
 
diff --git a/arch/arm/mach-spear/spear13xx-dma.h b/arch/arm/mach-spear/spear13xx-dma.h
deleted file mode 100644
index d50bdb6..0000000
--- a/arch/arm/mach-spear/spear13xx-dma.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/dma.h
- *
- * DMA information for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* request id of all the peripherals */
-enum dma_master_info {
-	/* Accessible from only one master */
-	DMA_MASTER_MCIF = 0,
-	DMA_MASTER_FSMC = 1,
-	/* Accessible from both 0 & 1 */
-	DMA_MASTER_MEMORY = 0,
-	DMA_MASTER_ADC = 0,
-	DMA_MASTER_UART0 = 0,
-	DMA_MASTER_SSP0 = 0,
-	DMA_MASTER_I2C0 = 0,
-
-#ifdef CONFIG_MACH_SPEAR1310
-	/* Accessible from only one master */
-	SPEAR1310_DMA_MASTER_JPEG = 1,
-
-	/* Accessible from both 0 & 1 */
-	SPEAR1310_DMA_MASTER_I2S = 0,
-	SPEAR1310_DMA_MASTER_UART1 = 0,
-	SPEAR1310_DMA_MASTER_UART2 = 0,
-	SPEAR1310_DMA_MASTER_UART3 = 0,
-	SPEAR1310_DMA_MASTER_UART4 = 0,
-	SPEAR1310_DMA_MASTER_UART5 = 0,
-	SPEAR1310_DMA_MASTER_I2C1 = 0,
-	SPEAR1310_DMA_MASTER_I2C2 = 0,
-	SPEAR1310_DMA_MASTER_I2C3 = 0,
-	SPEAR1310_DMA_MASTER_I2C4 = 0,
-	SPEAR1310_DMA_MASTER_I2C5 = 0,
-	SPEAR1310_DMA_MASTER_I2C6 = 0,
-	SPEAR1310_DMA_MASTER_I2C7 = 0,
-	SPEAR1310_DMA_MASTER_SSP1 = 0,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
-	/* Accessible from only one master */
-	SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
-	SPEAR1340_DMA_MASTER_I2S_REC = 1,
-	SPEAR1340_DMA_MASTER_I2C1 = 1,
-	SPEAR1340_DMA_MASTER_UART1 = 1,
-
-	/* following are accessible from both master 0 & 1 */
-	SPEAR1340_DMA_MASTER_SPDIF = 0,
-	SPEAR1340_DMA_MASTER_CAM = 1,
-	SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
-	SPEAR1340_DMA_MASTER_MALI = 0,
-#endif
-};
-
-enum request_id {
-	DMA_REQ_ADC = 0,
-	DMA_REQ_SSP0_TX = 4,
-	DMA_REQ_SSP0_RX = 5,
-	DMA_REQ_UART0_TX = 6,
-	DMA_REQ_UART0_RX = 7,
-	DMA_REQ_I2C0_TX = 8,
-	DMA_REQ_I2C0_RX = 9,
-
-#ifdef CONFIG_MACH_SPEAR1310
-	SPEAR1310_DMA_REQ_FROM_JPEG = 2,
-	SPEAR1310_DMA_REQ_TO_JPEG = 3,
-	SPEAR1310_DMA_REQ_I2S_TX = 10,
-	SPEAR1310_DMA_REQ_I2S_RX = 11,
-
-	SPEAR1310_DMA_REQ_I2C1_RX = 0,
-	SPEAR1310_DMA_REQ_I2C1_TX = 1,
-	SPEAR1310_DMA_REQ_I2C2_RX = 2,
-	SPEAR1310_DMA_REQ_I2C2_TX = 3,
-	SPEAR1310_DMA_REQ_I2C3_RX = 4,
-	SPEAR1310_DMA_REQ_I2C3_TX = 5,
-	SPEAR1310_DMA_REQ_I2C4_RX = 6,
-	SPEAR1310_DMA_REQ_I2C4_TX = 7,
-	SPEAR1310_DMA_REQ_I2C5_RX = 8,
-	SPEAR1310_DMA_REQ_I2C5_TX = 9,
-	SPEAR1310_DMA_REQ_I2C6_RX = 10,
-	SPEAR1310_DMA_REQ_I2C6_TX = 11,
-	SPEAR1310_DMA_REQ_UART1_RX = 12,
-	SPEAR1310_DMA_REQ_UART1_TX = 13,
-	SPEAR1310_DMA_REQ_UART2_RX = 14,
-	SPEAR1310_DMA_REQ_UART2_TX = 15,
-	SPEAR1310_DMA_REQ_UART5_RX = 16,
-	SPEAR1310_DMA_REQ_UART5_TX = 17,
-	SPEAR1310_DMA_REQ_SSP1_RX = 18,
-	SPEAR1310_DMA_REQ_SSP1_TX = 19,
-	SPEAR1310_DMA_REQ_I2C7_RX = 20,
-	SPEAR1310_DMA_REQ_I2C7_TX = 21,
-	SPEAR1310_DMA_REQ_UART3_RX = 28,
-	SPEAR1310_DMA_REQ_UART3_TX = 29,
-	SPEAR1310_DMA_REQ_UART4_RX = 30,
-	SPEAR1310_DMA_REQ_UART4_TX = 31,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
-	SPEAR1340_DMA_REQ_SPDIF_TX = 2,
-	SPEAR1340_DMA_REQ_SPDIF_RX = 3,
-	SPEAR1340_DMA_REQ_I2S_TX = 10,
-	SPEAR1340_DMA_REQ_I2S_RX = 11,
-	SPEAR1340_DMA_REQ_UART1_TX = 12,
-	SPEAR1340_DMA_REQ_UART1_RX = 13,
-	SPEAR1340_DMA_REQ_I2C1_TX = 14,
-	SPEAR1340_DMA_REQ_I2C1_RX = 15,
-	SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
-	SPEAR1340_DMA_REQ_CAM0_ODD = 1,
-	SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
-	SPEAR1340_DMA_REQ_CAM1_ODD = 3,
-	SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
-	SPEAR1340_DMA_REQ_CAM2_ODD = 5,
-	SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
-	SPEAR1340_DMA_REQ_CAM3_ODD = 7,
-#endif
-};
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 6dd2089..3621599 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -16,70 +16,12 @@
 #include <linux/amba/pl022.h>
 #include <linux/clk.h>
 #include <linux/clocksource.h>
-#include <linux/dw_dmac.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
-#include "generic.h"
 #include <mach/spear.h>
-
-#include "spear13xx-dma.h"
-
-/* common dw_dma filter routine to be used by peripherals */
-bool dw_dma_filter(struct dma_chan *chan, void *slave)
-{
-	struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
-
-	if (chan->device->dev == dws->dma_dev) {
-		chan->private = slave;
-		return true;
-	} else {
-		return false;
-	}
-}
-
-/* ssp device registration */
-static struct dw_dma_slave ssp_dma_param[] = {
-	{
-		/* Tx */
-		.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
-		.cfg_lo = 0,
-		.src_master = DMA_MASTER_MEMORY,
-		.dst_master = DMA_MASTER_SSP0,
-	}, {
-		/* Rx */
-		.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
-		.cfg_lo = 0,
-		.src_master = DMA_MASTER_SSP0,
-		.dst_master = DMA_MASTER_MEMORY,
-	}
-};
-
-struct pl022_ssp_controller pl022_plat_data = {
-	.enable_dma = 1,
-	.dma_filter = dw_dma_filter,
-	.dma_rx_param = &ssp_dma_param[1],
-	.dma_tx_param = &ssp_dma_param[0],
-};
-
-/* CF device registration */
-struct dw_dma_slave cf_dma_priv = {
-	.cfg_hi = 0,
-	.cfg_lo = 0,
-	.src_master = 0,
-	.dst_master = 0,
-};
-
-/* dmac device registeration */
-struct dw_dma_platform_data dmac_plat_data = {
-	.nr_channels = 8,
-	.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
-	.chan_priority = CHAN_PRIORITY_DESCENDING,
-	.block_size = 4095U,
-	.nr_masters = 2,
-	.data_width = { 3, 3, 0, 0 },
-};
+#include "generic.h"
 
 void __init spear13xx_l2x0_init(void)
 {
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 25160ae..54bb80b 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -749,12 +749,25 @@
 /* Early initializations */
 void __init versatile_init_early(void)
 {
+	u32 val;
 	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
 
 	osc4_clk.vcoreg	= sys + VERSATILE_SYS_OSCCLCD_OFFSET;
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
+
+	/*
+	 * set clock frequency:
+	 *	VERSATILE_REFCLK is 32KHz
+	 *	VERSATILE_TIMCLK is 1MHz
+	 */
+	val = readl(__io_address(VERSATILE_SCTL_BASE));
+	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+	       __io_address(VERSATILE_SCTL_BASE));
 }
 
 void __init versatile_init(void)
@@ -785,19 +798,6 @@
  */
 void __init versatile_timer_init(void)
 {
-	u32 val;
-
-	/* 
-	 * set clock frequency: 
-	 *	VERSATILE_REFCLK is 32KHz
-	 *	VERSATILE_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(VERSATILE_SCTL_BASE));
-	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
-	       __io_address(VERSATILE_SCTL_BASE));
 
 	/*
 	 * Initialise to a known state (all timers off)
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 2558f2e..3621b00 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -45,7 +45,6 @@
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
-	.init_time	= versatile_timer_init,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
 	.restart	= versatile_restart,
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 9366f37..b6083bb 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -1,6 +1,7 @@
 /*
  * Versatile Express V2M Motherboard Support
  */
+#include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
@@ -25,7 +26,6 @@
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 
-#include <asm/arch_timer.h>
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
@@ -63,9 +63,6 @@
 	if (WARN_ON(!base || irq == NO_IRQ))
 		return;
 
-	writel(0, base + TIMER_1_BASE + TIMER_CTRL);
-	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
-
 	sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
 	sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
 }
@@ -430,29 +427,11 @@
 
 static void __init v2m_dt_timer_init(void)
 {
-	struct device_node *node = NULL;
-
 	of_clk_init(NULL);
 
 	clocksource_of_init();
-	do {
-		node = of_find_compatible_node(node, NULL, "arm,sp804");
-	} while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
-	if (node) {
-		pr_info("Using SP804 '%s' as a clock & events source\n",
-				node->full_name);
-		WARN_ON(clk_register_clkdev(of_clk_get_by_name(node,
-				"timclken1"), "v2m-timer0", "sp804"));
-		WARN_ON(clk_register_clkdev(of_clk_get_by_name(node,
-				"timclken2"), "v2m-timer1", "sp804"));
-		v2m_sp804_init(of_iomap(node, 0),
-				irq_of_parse_and_map(node, 0));
-	}
 
-	arch_timer_of_register();
-
-	if (arch_timer_sched_clock_init() != 0)
-		versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
+	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
 				24000000);
 }
 
diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c
index 31666f6..adc0945 100644
--- a/arch/arm/mach-virt/virt.c
+++ b/arch/arm/mach-virt/virt.c
@@ -23,21 +23,13 @@
 #include <linux/of_platform.h>
 #include <linux/smp.h>
 
-#include <asm/arch_timer.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 
 static void __init virt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init virt_timer_init(void)
-{
-	WARN_ON(arch_timer_of_register() != 0);
-	WARN_ON(arch_timer_sched_clock_init() != 0);
-}
-
 static const char *virt_dt_match[] = {
 	"linux,dummy-virt",
 	NULL
@@ -47,7 +39,6 @@
 
 DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
 	.init_irq	= irqchip_init,
-	.init_time	= virt_timer_init,
 	.init_machine	= virt_init,
 	.smp		= smp_ops(virt_smp_ops),
 	.dt_compat	= virt_dt_match,
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index 91e2a6a..bf6ab242 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -130,4 +130,9 @@
 	return cval;
 }
 
+static inline int arch_timer_arch_init(void)
+{
+	return 0;
+}
+
 #endif
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
index b0ef18d1..a551f88 100644
--- a/arch/arm64/kernel/time.c
+++ b/arch/arm64/kernel/time.c
@@ -32,6 +32,7 @@
 #include <linux/timer.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/clocksource.h>
 
 #include <clocksource/arm_arch_timer.h>
 
@@ -77,10 +78,11 @@
 {
 	u32 arch_timer_rate;
 
-	if (arch_timer_init())
-		panic("Unable to initialise architected timer.\n");
+	clocksource_of_init();
 
 	arch_timer_rate = arch_timer_get_rate();
+	if (!arch_timer_rate)
+		panic("Unable to initialise architected timer.\n");
 
 	/* Cache the sched_clock multiplier to save a divide in the hot path. */
 	sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 405022d..7638121 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -209,8 +209,6 @@
 	struct dma_chan *dma_chan;
 	/* Mask for DMA transfers */
 	dma_cap_mask_t mask;
-	/* dma channel private data */
-	void *dma_priv;
 	/* DMA transfer work */
 	struct work_struct work;
 	/* DMA delayed finish work */
@@ -308,6 +306,7 @@
 static int cf_init(struct arasan_cf_dev *acdev)
 {
 	struct arasan_cf_pdata *pdata = dev_get_platdata(acdev->host->dev);
+	unsigned int if_clk;
 	unsigned long flags;
 	int ret = 0;
 
@@ -325,8 +324,12 @@
 
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
-	writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk :
-			CF_IF_CLK_166M, acdev->vbase + CLK_CFG);
+	/* TODO: read from device tree */
+	if_clk = CF_IF_CLK_166M;
+	if (pdata && pdata->cf_if_clk <= CF_IF_CLK_200M)
+		if_clk = pdata->cf_if_clk;
+
+	writel(if_clk, acdev->vbase + CLK_CFG);
 
 	writel(TRUE_IDE_MODE | CFHOST_ENB, acdev->vbase + OP_MODE);
 	cf_interrupt_enable(acdev, CARD_DETECT_IRQ, 1);
@@ -357,12 +360,6 @@
 	complete(&acdev->dma_completion);
 }
 
-static bool filter(struct dma_chan *chan, void *slave)
-{
-	chan->private = slave;
-	return true;
-}
-
 static inline void dma_complete(struct arasan_cf_dev *acdev)
 {
 	struct ata_queued_cmd *qc = acdev->qc;
@@ -530,8 +527,7 @@
 
 	/* request dma channels */
 	/* dma_request_channel may sleep, so calling from process context */
-	acdev->dma_chan = dma_request_channel(acdev->mask, filter,
-			acdev->dma_priv);
+	acdev->dma_chan = dma_request_slave_channel(acdev->host->dev, "data");
 	if (!acdev->dma_chan) {
 		dev_err(acdev->host->dev, "Unable to get dma_chan\n");
 		goto chan_request_fail;
@@ -798,6 +794,7 @@
 	struct ata_host *host;
 	struct ata_port *ap;
 	struct resource *res;
+	u32 quirk;
 	irq_handler_t irq_handler = NULL;
 	int ret = 0;
 
@@ -817,12 +814,17 @@
 		return -ENOMEM;
 	}
 
+	if (pdata)
+		quirk = pdata->quirk;
+	else
+		quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */
+
 	/* if irq is 0, support only PIO */
 	acdev->irq = platform_get_irq(pdev, 0);
 	if (acdev->irq)
 		irq_handler = arasan_cf_interrupt;
 	else
-		pdata->quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
+		quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
 
 	acdev->pbase = res->start;
 	acdev->vbase = devm_ioremap_nocache(&pdev->dev, res->start,
@@ -859,17 +861,16 @@
 	INIT_WORK(&acdev->work, data_xfer);
 	INIT_DELAYED_WORK(&acdev->dwork, delayed_finish);
 	dma_cap_set(DMA_MEMCPY, acdev->mask);
-	acdev->dma_priv = pdata->dma_priv;
 
 	/* Handle platform specific quirks */
-	if (pdata->quirk) {
-		if (pdata->quirk & CF_BROKEN_PIO) {
+	if (quirk) {
+		if (quirk & CF_BROKEN_PIO) {
 			ap->ops->set_piomode = NULL;
 			ap->pio_mask = 0;
 		}
-		if (pdata->quirk & CF_BROKEN_MWDMA)
+		if (quirk & CF_BROKEN_MWDMA)
 			ap->mwdma_mask = 0;
-		if (pdata->quirk & CF_BROKEN_UDMA)
+		if (quirk & CF_BROKEN_UDMA)
 			ap->udma_mask = 0;
 	}
 	ap->flags |= ATA_FLAG_PIO_POLLING | ATA_FLAG_NO_ATAPI;
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 7bc6e51..c20de4a 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -65,6 +65,7 @@
 
 config ARM_ARCH_TIMER
 	bool
+	select CLKSRC_OF if OF
 
 config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d7ad425..a2b2541 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -248,14 +248,16 @@
 static int __cpuinit arch_timer_cpu_notify(struct notifier_block *self,
 					   unsigned long action, void *hcpu)
 {
-	struct clock_event_device *evt = this_cpu_ptr(arch_timer_evt);
-
+	/*
+	 * Grab cpu pointer in each case to avoid spurious
+	 * preemptible warnings
+	 */
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_STARTING:
-		arch_timer_setup(evt);
+		arch_timer_setup(this_cpu_ptr(arch_timer_evt));
 		break;
 	case CPU_DYING:
-		arch_timer_stop(evt);
+		arch_timer_stop(this_cpu_ptr(arch_timer_evt));
 		break;
 	}
 
@@ -337,22 +339,14 @@
 	return err;
 }
 
-static const struct of_device_id arch_timer_of_match[] __initconst = {
-	{ .compatible	= "arm,armv7-timer",	},
-	{ .compatible	= "arm,armv8-timer",	},
-	{},
-};
-
-int __init arch_timer_init(void)
+static void __init arch_timer_init(struct device_node *np)
 {
-	struct device_node *np;
 	u32 freq;
 	int i;
 
-	np = of_find_matching_node(NULL, arch_timer_of_match);
-	if (!np) {
-		pr_err("arch_timer: can't find DT node\n");
-		return -ENODEV;
+	if (arch_timer_get_rate()) {
+		pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+		return;
 	}
 
 	/* Try to determine the frequency from the device tree or CNTFRQ */
@@ -378,7 +372,7 @@
 		if (!arch_timer_ppi[PHYS_SECURE_PPI] ||
 		    !arch_timer_ppi[PHYS_NONSECURE_PPI]) {
 			pr_warn("arch_timer: No interrupt available, giving up\n");
-			return -EINVAL;
+			return;
 		}
 	}
 
@@ -387,5 +381,8 @@
 	else
 		arch_timer_read_counter = arch_counter_get_cntpct;
 
-	return arch_timer_register();
+	arch_timer_register();
+	arch_timer_arch_init();
 }
+CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
+CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 6610268..13a9e49 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -24,7 +24,6 @@
 #include <linux/of_address.h>
 #include <linux/clocksource.h>
 
-#include <asm/arch_timer.h>
 #include <asm/localtimer.h>
 
 #include <plat/cpu.h>
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c28fccc..cda4cb5 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
+obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
 obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_METAG)			+= irq-metag-ext.o
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
similarity index 91%
rename from arch/arm/mach-mvebu/irq-armada-370-xp.c
rename to drivers/irqchip/irq-armada-370-xp.c
index 830139a..bb328a3 100644
--- a/arch/arm/mach-mvebu/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -25,7 +25,9 @@
 #include <asm/mach/arch.h>
 #include <asm/exception.h>
 #include <asm/smp_plat.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
 
 /* Interrupt Controller Registers Map */
 #define ARMADA_370_XP_INT_SET_MASK_OFFS		(0x48)
@@ -46,7 +48,9 @@
 
 #define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
 
-#define ACTIVE_DOORBELLS			(8)
+#define IPI_DOORBELL_START                      (0)
+#define IPI_DOORBELL_END                        (8)
+#define IPI_DOORBELL_MASK                       0xFF
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
 
@@ -184,7 +188,7 @@
 	writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
 
 	/* Enable first 8 IPIs */
-	writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base +
+	writel(IPI_DOORBELL_MASK, per_cpu_int_base +
 		ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
 
 	/* Unmask IPI interrupt */
@@ -197,6 +201,50 @@
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static asmlinkage void __exception_irq_entry
+armada_370_xp_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+
+	do {
+		irqstat = readl_relaxed(per_cpu_int_base +
+					ARMADA_370_XP_CPU_INTACK_OFFS);
+		irqnr = irqstat & 0x3FF;
+
+		if (irqnr > 1022)
+			break;
+
+		if (irqnr > 0) {
+			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
+					irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+#ifdef CONFIG_SMP
+		/* IPI Handling */
+		if (irqnr == 0) {
+			u32 ipimask, ipinr;
+
+			ipimask = readl_relaxed(per_cpu_int_base +
+						ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
+				& IPI_DOORBELL_MASK;
+
+			writel(~IPI_DOORBELL_MASK, per_cpu_int_base +
+				ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+			/* Handle all pending doorbells */
+			for (ipinr = IPI_DOORBELL_START;
+			     ipinr < IPI_DOORBELL_END; ipinr++) {
+				if (ipimask & (0x1 << ipinr))
+					handle_IPI(ipinr, regs);
+			}
+			continue;
+		}
+#endif
+
+	} while (1);
+}
+
 static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 					     struct device_node *parent)
 {
@@ -232,61 +280,9 @@
 
 #endif
 
+	set_handle_irq(armada_370_xp_handle_irq);
+
 	return 0;
 }
 
-asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
-							       *regs)
-{
-	u32 irqstat, irqnr;
-
-	do {
-		irqstat = readl_relaxed(per_cpu_int_base +
-					ARMADA_370_XP_CPU_INTACK_OFFS);
-		irqnr = irqstat & 0x3FF;
-
-		if (irqnr > 1022)
-			break;
-
-		if (irqnr > 0) {
-			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
-					irqnr);
-			handle_IRQ(irqnr, regs);
-			continue;
-		}
-#ifdef CONFIG_SMP
-		/* IPI Handling */
-		if (irqnr == 0) {
-			u32 ipimask, ipinr;
-
-			ipimask = readl_relaxed(per_cpu_int_base +
-						ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
-				& 0xFF;
-
-			writel(0x0, per_cpu_int_base +
-				ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
-
-			/* Handle all pending doorbells */
-			for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) {
-				if (ipimask & (0x1 << ipinr))
-					handle_IPI(ipinr, regs);
-			}
-			continue;
-		}
-#endif
-
-	} while (1);
-}
-
-static const struct of_device_id mpic_of_match[] __initconst = {
-	{.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init},
-	{},
-};
-
-void __init armada_370_xp_init_irq(void)
-{
-	of_irq_init(mpic_of_match);
-#ifdef CONFIG_CACHE_L2X0
-	l2x0_of_init(0, ~0UL);
-#endif
-}
+IRQCHIP_DECLARE(armada_370_xp_mpic, "marvell,mpic", armada_370_xp_mpic_of_init);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index b0fe393..371cc66f 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1139,6 +1139,35 @@
 	return -ENODEV;
 }
 
+static int pl022_dma_autoprobe(struct pl022 *pl022)
+{
+	struct device *dev = &pl022->adev->dev;
+
+	/* automatically configure DMA channels from platform, normally using DT */
+	pl022->dma_rx_channel = dma_request_slave_channel(dev, "rx");
+	if (!pl022->dma_rx_channel)
+		goto err_no_rxchan;
+
+	pl022->dma_tx_channel = dma_request_slave_channel(dev, "tx");
+	if (!pl022->dma_tx_channel)
+		goto err_no_txchan;
+
+	pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!pl022->dummypage)
+		goto err_no_dummypage;
+
+	return 0;
+
+err_no_dummypage:
+	dma_release_channel(pl022->dma_tx_channel);
+	pl022->dma_tx_channel = NULL;
+err_no_txchan:
+	dma_release_channel(pl022->dma_rx_channel);
+	pl022->dma_rx_channel = NULL;
+err_no_rxchan:
+	return -ENODEV;
+}
+		
 static void terminate_dma(struct pl022 *pl022)
 {
 	struct dma_chan *rxchan = pl022->dma_rx_channel;
@@ -1167,6 +1196,11 @@
 	return -ENODEV;
 }
 
+static inline int pl022_dma_autoprobe(struct pl022 *pl022)
+{
+	return 0;
+}
+
 static inline int pl022_dma_probe(struct pl022 *pl022)
 {
 	return 0;
@@ -2226,8 +2260,13 @@
 		goto err_no_irq;
 	}
 
-	/* Get DMA channels */
-	if (platform_info->enable_dma) {
+	/* Get DMA channels, try autoconfiguration first */
+	status = pl022_dma_autoprobe(pl022);
+
+	/* If that failed, use channels from platform_info */
+	if (status == 0)
+		platform_info->enable_dma = 1;
+	else if (platform_info->enable_dma) {
 		status = pl022_dma_probe(pl022);
 		if (status != 0)
 			platform_info->enable_dma = 0;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b2e9e17..8ab70a6 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -267,7 +267,7 @@
 	}
 }
 
-static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
 {
 	/* DMA is the sole user of the platform data right now */
 	struct amba_pl011_data *plat = uap->port.dev->platform_data;
@@ -281,20 +281,25 @@
 	struct dma_chan *chan;
 	dma_cap_mask_t mask;
 
-	/* We need platform data */
-	if (!plat || !plat->dma_filter) {
-		dev_info(uap->port.dev, "no DMA platform data\n");
-		return;
-	}
+	chan = dma_request_slave_channel(dev, "tx");
 
-	/* Try to acquire a generic DMA engine slave TX channel */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
 	if (!chan) {
-		dev_err(uap->port.dev, "no TX DMA channel!\n");
-		return;
+		/* We need platform data */
+		if (!plat || !plat->dma_filter) {
+			dev_info(uap->port.dev, "no DMA platform data\n");
+			return;
+		}
+
+		/* Try to acquire a generic DMA engine slave TX channel */
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_SLAVE, mask);
+
+		chan = dma_request_channel(mask, plat->dma_filter,
+						plat->dma_tx_param);
+		if (!chan) {
+			dev_err(uap->port.dev, "no TX DMA channel!\n");
+			return;
+		}
 	}
 
 	dmaengine_slave_config(chan, &tx_conf);
@@ -304,7 +309,18 @@
 		 dma_chan_name(uap->dmatx.chan));
 
 	/* Optionally make use of an RX channel as well */
-	if (plat->dma_rx_param) {
+	chan = dma_request_slave_channel(dev, "rx");
+	
+	if (!chan && plat->dma_rx_param) {
+		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
+
+		if (!chan) {
+			dev_err(uap->port.dev, "no RX DMA channel!\n");
+			return;
+		}
+	}
+
+	if (chan) {
 		struct dma_slave_config rx_conf = {
 			.src_addr = uap->port.mapbase + UART01x_DR,
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -313,12 +329,6 @@
 			.device_fc = false,
 		};
 
-		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
-		if (!chan) {
-			dev_err(uap->port.dev, "no RX DMA channel!\n");
-			return;
-		}
-
 		dmaengine_slave_config(chan, &rx_conf);
 		uap->dmarx.chan = chan;
 
@@ -360,6 +370,7 @@
 struct dma_uap {
 	struct list_head node;
 	struct uart_amba_port *uap;
+	struct device *dev;
 };
 
 static LIST_HEAD(pl011_dma_uarts);
@@ -370,7 +381,7 @@
 
 	list_for_each_safe(node, tmp, &pl011_dma_uarts) {
 		struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
-		pl011_dma_probe_initcall(dmau->uap);
+		pl011_dma_probe_initcall(dmau->dev, dmau->uap);
 		list_del(node);
 		kfree(dmau);
 	}
@@ -379,18 +390,19 @@
 
 device_initcall(pl011_dma_initcall);
 
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
 	struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
 	if (dmau) {
 		dmau->uap = uap;
+		dmau->dev = dev;
 		list_add_tail(&dmau->node, &pl011_dma_uarts);
 	}
 }
 #else
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
-	pl011_dma_probe_initcall(uap);
+	pl011_dma_probe_initcall(dev, uap);
 }
 #endif
 
@@ -1096,7 +1108,7 @@
 
 #else
 /* Blank functions if the DMA engine is not available */
-static inline void pl011_dma_probe(struct uart_amba_port *uap)
+static inline void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
 }
 
@@ -2155,7 +2167,7 @@
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
-	pl011_dma_probe(uap);
+	pl011_dma_probe(&dev->dev, uap);
 
 	/* Ensure interrupts from this UART are masked and cleared */
 	writew(0, uap->port.membase + UART011_IMSC);
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 2603267..e6c9c4c 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -31,18 +31,12 @@
 
 #ifdef CONFIG_ARM_ARCH_TIMER
 
-extern int arch_timer_init(void);
 extern u32 arch_timer_get_rate(void);
 extern u64 (*arch_timer_read_counter)(void);
 extern struct timecounter *arch_timer_get_timecounter(void);
 
 #else
 
-static inline int arch_timer_init(void)
-{
-	return -ENXIO;
-}
-
 static inline u32 arch_timer_get_rate(void)
 {
 	return 0;
diff --git a/include/linux/of.h b/include/linux/of.h
index 1b671c3..1fd08ca 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -387,6 +387,11 @@
 	return 0;
 }
 
+static inline int of_device_is_available(const struct device_node *device)
+{
+	return 0;
+}
+
 static inline struct property *of_find_property(const struct device_node *np,
 						const char *name,
 						int *lenp)
diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h
index a7b4fc3..3cc21c9 100644
--- a/include/linux/pata_arasan_cf_data.h
+++ b/include/linux/pata_arasan_cf_data.h
@@ -37,8 +37,6 @@
 	#define CF_BROKEN_PIO			(1)
 	#define CF_BROKEN_MWDMA			(1 << 1)
 	#define CF_BROKEN_UDMA			(1 << 2)
-	/* This is platform specific data for the DMA controller */
-	void *dma_priv;
 };
 
 static inline void