ACPICA: Fix for resource descriptor optimization issues for _CRS/_SRC
Fixed a problem where resource descriptor size optimization
could cause a problem when a _CRS resource template is passed
to a _SRS method. The _SRS resource template must use the same
descriptors (with the same size) as returned from _CRS. This
change affects the following resource descriptors: IRQ/IRQNoFlags
and StartDependendentFn/StartDependentFnNoPri.
http://bugzilla.kernel.org/show_bug.cgi?id=9487
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index dcc51e9..db0a835 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -211,6 +211,13 @@
* variable-length fields
*/
switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
+
+ if (resource->data.irq.descriptor_length == 2) {
+ total_size--;
+ }
+ break;
+
case ACPI_RESOURCE_TYPE_VENDOR:
/*
* Vendor Defined Resource:
diff --git a/drivers/acpi/resources/rsdump.c b/drivers/acpi/resources/rsdump.c
index 46da116..ed6447d 100644
--- a/drivers/acpi/resources/rsdump.c
+++ b/drivers/acpi/resources/rsdump.c
@@ -87,8 +87,10 @@
*
******************************************************************************/
-struct acpi_rsdump_info acpi_rs_dump_irq[6] = {
+struct acpi_rsdump_info acpi_rs_dump_irq[7] = {
{ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_irq), "IRQ", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(irq.descriptor_length),
+ "Descriptor Length", NULL},
{ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.triggering), "Triggering",
acpi_gbl_he_decode},
{ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.polarity), "Polarity",
@@ -115,9 +117,11 @@
NULL}
};
-struct acpi_rsdump_info acpi_rs_dump_start_dpf[3] = {
+struct acpi_rsdump_info acpi_rs_dump_start_dpf[4] = {
{ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_start_dpf),
"Start-Dependent-Functions", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(start_dpf.descriptor_length),
+ "Descriptor Length", NULL},
{ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.compatibility_priority),
"Compatibility Priority", acpi_gbl_config_decode},
{ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.performance_robustness),
diff --git a/drivers/acpi/resources/rsio.c b/drivers/acpi/resources/rsio.c
index b297bc3..50f3acd 100644
--- a/drivers/acpi/resources/rsio.c
+++ b/drivers/acpi/resources/rsio.c
@@ -185,7 +185,7 @@
*
******************************************************************************/
-struct acpi_rsconvert_info acpi_rs_get_start_dpf[5] = {
+struct acpi_rsconvert_info acpi_rs_get_start_dpf[6] = {
{ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_START_DEPENDENT,
ACPI_RS_SIZE(struct acpi_resource_start_dependent),
ACPI_RSC_TABLE_SIZE(acpi_rs_get_start_dpf)},
@@ -196,6 +196,12 @@
ACPI_ACCEPTABLE_CONFIGURATION,
2},
+ /* Get the descriptor length (0 or 1 for Start Dpf descriptor) */
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.start_dpf.descriptor_length),
+ AML_OFFSET(start_dpf.descriptor_type),
+ 0},
+
/* All done if there is no flag byte present in the descriptor */
{ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_AML_LENGTH, 0, 1},
@@ -219,7 +225,9 @@
*
******************************************************************************/
-struct acpi_rsconvert_info acpi_rs_set_start_dpf[6] = {
+struct acpi_rsconvert_info acpi_rs_set_start_dpf[10] = {
+ /* Start with a default descriptor of length 1 */
+
{ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_START_DEPENDENT,
sizeof(struct aml_resource_start_dependent),
ACPI_RSC_TABLE_SIZE(acpi_rs_set_start_dpf)},
@@ -236,6 +244,33 @@
AML_OFFSET(start_dpf.flags),
2},
/*
+ * All done if the output descriptor length is required to be 1
+ * (i.e., optimization to 0 bytes cannot be attempted)
+ */
+ {ACPI_RSC_EXIT_EQ, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.start_dpf.descriptor_length),
+ 1},
+
+ /* Set length to 0 bytes (no flags byte) */
+
+ {ACPI_RSC_LENGTH, 0, 0,
+ sizeof(struct aml_resource_start_dependent_noprio)},
+
+ /*
+ * All done if the output descriptor length is required to be 0.
+ *
+ * TBD: Perhaps we should check for error if input flags are not
+ * compatible with a 0-byte descriptor.
+ */
+ {ACPI_RSC_EXIT_EQ, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.start_dpf.descriptor_length),
+ 0},
+
+ /* Reset length to 1 byte (descriptor with flags byte) */
+
+ {ACPI_RSC_LENGTH, 0, 0, sizeof(struct aml_resource_irq)},
+
+ /*
* All done if flags byte is necessary -- if either priority value
* is not ACPI_ACCEPTABLE_CONFIGURATION
*/
diff --git a/drivers/acpi/resources/rsirq.c b/drivers/acpi/resources/rsirq.c
index 5657f7b..382a77b 100644
--- a/drivers/acpi/resources/rsirq.c
+++ b/drivers/acpi/resources/rsirq.c
@@ -52,7 +52,7 @@
* acpi_rs_get_irq
*
******************************************************************************/
-struct acpi_rsconvert_info acpi_rs_get_irq[7] = {
+struct acpi_rsconvert_info acpi_rs_get_irq[8] = {
{ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_IRQ,
ACPI_RS_SIZE(struct acpi_resource_irq),
ACPI_RSC_TABLE_SIZE(acpi_rs_get_irq)},
@@ -69,6 +69,12 @@
ACPI_EDGE_SENSITIVE,
1},
+ /* Get the descriptor length (2 or 3 for IRQ descriptor) */
+
+ {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.irq.descriptor_length),
+ AML_OFFSET(irq.descriptor_type),
+ 0},
+
/* All done if no flag byte present in descriptor */
{ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_AML_LENGTH, 0, 3},
@@ -94,7 +100,9 @@
*
******************************************************************************/
-struct acpi_rsconvert_info acpi_rs_set_irq[9] = {
+struct acpi_rsconvert_info acpi_rs_set_irq[13] = {
+ /* Start with a default descriptor of length 3 */
+
{ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_IRQ,
sizeof(struct aml_resource_irq),
ACPI_RSC_TABLE_SIZE(acpi_rs_set_irq)},
@@ -105,7 +113,7 @@
AML_OFFSET(irq.irq_mask),
ACPI_RS_OFFSET(data.irq.interrupt_count)},
- /* Set the flags byte by default */
+ /* Set the flags byte */
{ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering),
AML_OFFSET(irq.flags),
@@ -118,6 +126,33 @@
{ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.sharable),
AML_OFFSET(irq.flags),
4},
+
+ /*
+ * All done if the output descriptor length is required to be 3
+ * (i.e., optimization to 2 bytes cannot be attempted)
+ */
+ {ACPI_RSC_EXIT_EQ, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.irq.descriptor_length),
+ 3},
+
+ /* Set length to 2 bytes (no flags byte) */
+
+ {ACPI_RSC_LENGTH, 0, 0, sizeof(struct aml_resource_irq_noflags)},
+
+ /*
+ * All done if the output descriptor length is required to be 2.
+ *
+ * TBD: Perhaps we should check for error if input flags are not
+ * compatible with a 2-byte descriptor.
+ */
+ {ACPI_RSC_EXIT_EQ, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.irq.descriptor_length),
+ 2},
+
+ /* Reset length to 3 bytes (descriptor with flags byte) */
+
+ {ACPI_RSC_LENGTH, 0, 0, sizeof(struct aml_resource_irq)},
+
/*
* Check if the flags byte is necessary. Not needed if the flags are:
* ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_HIGH, ACPI_EXCLUSIVE
@@ -134,7 +169,7 @@
ACPI_RS_OFFSET(data.irq.sharable),
ACPI_EXCLUSIVE},
- /* irq_no_flags() descriptor can be used */
+ /* We can optimize to a 2-byte irq_no_flags() descriptor */
{ACPI_RSC_LENGTH, 0, 0, sizeof(struct aml_resource_irq_noflags)}
};
diff --git a/drivers/acpi/resources/rsmisc.c b/drivers/acpi/resources/rsmisc.c
index c7081af..3e69eff 100644
--- a/drivers/acpi/resources/rsmisc.c
+++ b/drivers/acpi/resources/rsmisc.c
@@ -497,6 +497,17 @@
}
break;
+ case ACPI_RSC_EXIT_EQ:
+ /*
+ * Control - Exit conversion if equal
+ */
+ if (*ACPI_ADD_PTR(u8, resource,
+ COMPARE_TARGET(info)) ==
+ COMPARE_VALUE(info)) {
+ goto exit;
+ }
+ break;
+
default:
ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
