Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/Documentation/cpu-freq/cpufreq-nforce2.txt b/Documentation/cpu-freq/cpufreq-nforce2.txt
new file mode 100644
index 0000000..9188337
--- /dev/null
+++ b/Documentation/cpu-freq/cpufreq-nforce2.txt
@@ -0,0 +1,19 @@
+
+The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 plattforms.
+
+This works better than on other plattforms, because the FSB of the CPU
+can be controlled independently from the PCI/AGP clock.
+
+The module has two options:
+
+ fid: multiplier * 10 (for example 8.5 = 85)
+ min_fsb: minimum FSB
+
+If not set, fid is calculated from the current CPU speed and the FSB.
+min_fsb defaults to FSB at boot time - 50 MHz.
+
+IMPORTANT: The available range is limited downwards!
+ Also the minimum available FSB can differ, for systems
+ booting with 200 MHz, 150 should always work.
+
+
