Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
new file mode 100644
index 0000000..6a5a914
--- /dev/null
+++ b/arch/alpha/kernel/core_lca.c
@@ -0,0 +1,515 @@
+/*
+ * linux/arch/alpha/kernel/core_lca.c
+ *
+ * Written by David Mosberger (davidm@cs.arizona.edu) with some code
+ * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
+ * bios code.
+ *
+ * Code common to all LCA core logic chips.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_lca.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+/*
+ * Machine check reasons. Defined according to PALcode sources
+ * (osf.h and platform.h).
+ */
+#define MCHK_K_TPERR 0x0080
+#define MCHK_K_TCPERR 0x0082
+#define MCHK_K_HERR 0x0084
+#define MCHK_K_ECC_C 0x0086
+#define MCHK_K_ECC_NC 0x0088
+#define MCHK_K_UNKNOWN 0x008A
+#define MCHK_K_CACKSOFT 0x008C
+#define MCHK_K_BUGCHECK 0x008E
+#define MCHK_K_OS_BUGCHECK 0x0090
+#define MCHK_K_DCPERR 0x0092
+#define MCHK_K_ICPERR 0x0094
+
+
+/*
+ * Platform-specific machine-check reasons:
+ */
+#define MCHK_K_SIO_SERR 0x204 /* all platforms so far */
+#define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */
+#define MCHK_K_DCSR 0x208 /* all but Noname */
+
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address and setup the LCA_IOC_CONF register
+ * accordingly. It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * 31:11 Device select bit.
+ * 10:8 Function number
+ * 7:2 Register number
+ *
+ * Type 1:
+ *
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * 31:24 reserved
+ * 23:16 bus number (8 bits = 128 possible buses)
+ * 15:11 Device number (5 bits)
+ * 10:8 function number
+ * 7:2 register number
+ *
+ * Notes:
+ * The function number selects which function of a multi-function device
+ * (e.g., SCSI and Ethernet).
+ *
+ * The register selects a DWORD (32 bit) register offset. Hence it
+ * doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ * bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+ unsigned long *pci_addr)
+{
+ unsigned long addr;
+ u8 bus = pbus->number;
+
+ if (bus == 0) {
+ int device = device_fn >> 3;
+ int func = device_fn & 0x7;
+
+ /* Type 0 configuration cycle. */
+
+ if (device > 12) {
+ return -1;
+ }
+
+ *(vulp)LCA_IOC_CONF = 0;
+ addr = (1 << (11 + device)) | (func << 8) | where;
+ } else {
+ /* Type 1 configuration cycle. */
+ *(vulp)LCA_IOC_CONF = 1;
+ addr = (bus << 16) | (device_fn << 8) | where;
+ }
+ *pci_addr = addr;
+ return 0;
+}
+
+static unsigned int
+conf_read(unsigned long addr)
+{
+ unsigned long flags, code, stat0;
+ unsigned int value;
+
+ local_irq_save(flags);
+
+ /* Reset status register to avoid loosing errors. */
+ stat0 = *(vulp)LCA_IOC_STAT0;
+ *(vulp)LCA_IOC_STAT0 = stat0;
+ mb();
+
+ /* Access configuration space. */
+ value = *(vuip)addr;
+ draina();
+
+ stat0 = *(vulp)LCA_IOC_STAT0;
+ if (stat0 & LCA_IOC_STAT0_ERR) {
+ code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
+ & LCA_IOC_STAT0_CODE_MASK);
+ if (code != 1) {
+ printk("lca.c:conf_read: got stat0=%lx\n", stat0);
+ }
+
+ /* Reset error status. */
+ *(vulp)LCA_IOC_STAT0 = stat0;
+ mb();
+
+ /* Reset machine check. */
+ wrmces(0x7);
+
+ value = 0xffffffff;
+ }
+ local_irq_restore(flags);
+ return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value)
+{
+ unsigned long flags, code, stat0;
+
+ local_irq_save(flags); /* avoid getting hit by machine check */
+
+ /* Reset status register to avoid loosing errors. */
+ stat0 = *(vulp)LCA_IOC_STAT0;
+ *(vulp)LCA_IOC_STAT0 = stat0;
+ mb();
+
+ /* Access configuration space. */
+ *(vuip)addr = value;
+ draina();
+
+ stat0 = *(vulp)LCA_IOC_STAT0;
+ if (stat0 & LCA_IOC_STAT0_ERR) {
+ code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
+ & LCA_IOC_STAT0_CODE_MASK);
+ if (code != 1) {
+ printk("lca.c:conf_write: got stat0=%lx\n", stat0);
+ }
+
+ /* Reset error status. */
+ *(vulp)LCA_IOC_STAT0 = stat0;
+ mb();
+
+ /* Reset machine check. */
+ wrmces(0x7);
+ }
+ local_irq_restore(flags);
+}
+
+static int
+lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ unsigned long addr, pci_addr;
+ long mask;
+ int shift;
+
+ if (mk_conf_addr(bus, devfn, where, &pci_addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = (where & 3) * 8;
+ mask = (size - 1) * 8;
+ addr = (pci_addr << 5) + mask + LCA_CONF;
+ *value = conf_read(addr) >> (shift);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+ u32 value)
+{
+ unsigned long addr, pci_addr;
+ long mask;
+
+ if (mk_conf_addr(bus, devfn, where, &pci_addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ mask = (size - 1) * 8;
+ addr = (pci_addr << 5) + mask + LCA_CONF;
+ conf_write(addr, value << ((where & 3) * 8));
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops lca_pci_ops =
+{
+ .read = lca_read_config,
+ .write = lca_write_config,
+};
+
+void
+lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+ wmb();
+ *(vulp)LCA_IOC_TBIA = 0;
+ mb();
+}
+
+void __init
+lca_init_arch(void)
+{
+ struct pci_controller *hose;
+
+ /*
+ * Create our single hose.
+ */
+
+ pci_isa_hose = hose = alloc_pci_controller();
+ hose->io_space = &ioport_resource;
+ hose->mem_space = &iomem_resource;
+ hose->index = 0;
+
+ hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
+ hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
+ hose->sparse_io_base = LCA_IO - IDENT_ADDR;
+ hose->dense_io_base = 0;
+
+ /*
+ * Set up the PCI to main memory translation windows.
+ *
+ * Mimic the SRM settings for the direct-map window.
+ * Window 0 is scatter-gather 8MB at 8MB (for isa).
+ * Window 1 is direct access 1GB at 1GB.
+ *
+ * Note that we do not try to save any of the DMA window CSRs
+ * before setting them, since we cannot read those CSRs on LCA.
+ */
+ hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
+ hose->sg_pci = NULL;
+ __direct_map_base = 0x40000000;
+ __direct_map_size = 0x40000000;
+
+ *(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
+ *(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
+ *(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
+
+ *(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
+ *(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
+ *(vulp)LCA_IOC_T_BASE1 = 0;
+
+ *(vulp)LCA_IOC_TB_ENA = 0x80;
+
+ lca_pci_tbi(hose, 0, -1);
+
+ /*
+ * Disable PCI parity for now. The NCR53c810 chip has
+ * troubles meeting the PCI spec which results in
+ * data parity errors.
+ */
+ *(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
+
+ /*
+ * Finally, set up for restoring the correct HAE if using SRM.
+ * Again, since we cannot read many of the CSRs on the LCA,
+ * one of which happens to be the HAE, we save the value that
+ * the SRM will expect...
+ */
+ if (alpha_using_srm)
+ srm_hae = 0x80000000UL;
+}
+
+/*
+ * Constants used during machine-check handling. I suppose these
+ * could be moved into lca.h but I don't see much reason why anybody
+ * else would want to use them.
+ */
+
+#define ESR_EAV (1UL<< 0) /* error address valid */
+#define ESR_CEE (1UL<< 1) /* correctable error */
+#define ESR_UEE (1UL<< 2) /* uncorrectable error */
+#define ESR_WRE (1UL<< 3) /* write-error */
+#define ESR_SOR (1UL<< 4) /* error source */
+#define ESR_CTE (1UL<< 7) /* cache-tag error */
+#define ESR_MSE (1UL<< 9) /* multiple soft errors */
+#define ESR_MHE (1UL<<10) /* multiple hard errors */
+#define ESR_NXM (1UL<<12) /* non-existent memory */
+
+#define IOC_ERR ( 1<<4) /* ioc logs an error */
+#define IOC_CMD_SHIFT 0
+#define IOC_CMD (0xf<<IOC_CMD_SHIFT)
+#define IOC_CODE_SHIFT 8
+#define IOC_CODE (0xf<<IOC_CODE_SHIFT)
+#define IOC_LOST ( 1<<5)
+#define IOC_P_NBR ((__u32) ~((1<<13) - 1))
+
+static void
+mem_error(unsigned long esr, unsigned long ear)
+{
+ printk(" %s %s error to %s occurred at address %x\n",
+ ((esr & ESR_CEE) ? "Correctable" :
+ (esr & ESR_UEE) ? "Uncorrectable" : "A"),
+ (esr & ESR_WRE) ? "write" : "read",
+ (esr & ESR_SOR) ? "memory" : "b-cache",
+ (unsigned) (ear & 0x1ffffff8));
+ if (esr & ESR_CTE) {
+ printk(" A b-cache tag parity error was detected.\n");
+ }
+ if (esr & ESR_MSE) {
+ printk(" Several other correctable errors occurred.\n");
+ }
+ if (esr & ESR_MHE) {
+ printk(" Several other uncorrectable errors occurred.\n");
+ }
+ if (esr & ESR_NXM) {
+ printk(" Attempted to access non-existent memory.\n");
+ }
+}
+
+static void
+ioc_error(__u32 stat0, __u32 stat1)
+{
+ static const char * const pci_cmd[] = {
+ "Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
+ "Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
+ "Rsvd4", "Configuration Read", "Configuration Write",
+ "Memory Read Multiple", "Dual Address", "Memory Read Line",
+ "Memory Write and Invalidate"
+ };
+ static const char * const err_name[] = {
+ "exceeded retry limit", "no device", "bad data parity",
+ "target abort", "bad address parity", "page table read error",
+ "invalid page", "data error"
+ };
+ unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
+ unsigned cmd = (stat0 & IOC_CMD) >> IOC_CMD_SHIFT;
+
+ printk(" %s initiated PCI %s cycle to address %x"
+ " failed due to %s.\n",
+ code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
+
+ if (code == 5 || code == 6) {
+ printk(" (Error occurred at PCI memory address %x.)\n",
+ (stat0 & ~IOC_P_NBR));
+ }
+ if (stat0 & IOC_LOST) {
+ printk(" Other PCI errors occurred simultaneously.\n");
+ }
+}
+
+void
+lca_machine_check(unsigned long vector, unsigned long la_ptr,
+ struct pt_regs *regs)
+{
+ const char * reason;
+ union el_lca el;
+
+ el.c = (struct el_common *) la_ptr;
+
+ wrmces(rdmces()); /* reset machine check pending flag */
+
+ printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
+ vector, regs->pc, (unsigned int) el.c->code);
+
+ /*
+ * The first quadword after the common header always seems to
+ * be the machine check reason---don't know why this isn't
+ * part of the common header instead. In the case of a long
+ * logout frame, the upper 32 bits is the machine check
+ * revision level, which we ignore for now.
+ */
+ switch ((unsigned int) el.c->code) {
+ case MCHK_K_TPERR: reason = "tag parity error"; break;
+ case MCHK_K_TCPERR: reason = "tag control parity error"; break;
+ case MCHK_K_HERR: reason = "access to non-existent memory"; break;
+ case MCHK_K_ECC_C: reason = "correctable ECC error"; break;
+ case MCHK_K_ECC_NC: reason = "non-correctable ECC error"; break;
+ case MCHK_K_CACKSOFT: reason = "MCHK_K_CACKSOFT"; break;
+ case MCHK_K_BUGCHECK: reason = "illegal exception in PAL mode"; break;
+ case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
+ case MCHK_K_DCPERR: reason = "d-cache parity error"; break;
+ case MCHK_K_ICPERR: reason = "i-cache parity error"; break;
+ case MCHK_K_SIO_SERR: reason = "SIO SERR occurred on PCI bus"; break;
+ case MCHK_K_SIO_IOCHK: reason = "SIO IOCHK occurred on ISA bus"; break;
+ case MCHK_K_DCSR: reason = "MCHK_K_DCSR"; break;
+ case MCHK_K_UNKNOWN:
+ default: reason = "unknown"; break;
+ }
+
+ switch (el.c->size) {
+ case sizeof(struct el_lca_mcheck_short):
+ printk(KERN_CRIT
+ " Reason: %s (short frame%s, dc_stat=%#lx):\n",
+ reason, el.c->retry ? ", retryable" : "",
+ el.s->dc_stat);
+ if (el.s->esr & ESR_EAV) {
+ mem_error(el.s->esr, el.s->ear);
+ }
+ if (el.s->ioc_stat0 & IOC_ERR) {
+ ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
+ }
+ break;
+
+ case sizeof(struct el_lca_mcheck_long):
+ printk(KERN_CRIT " Reason: %s (long frame%s):\n",
+ reason, el.c->retry ? ", retryable" : "");
+ printk(KERN_CRIT
+ " reason: %#lx exc_addr: %#lx dc_stat: %#lx\n",
+ el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
+ printk(KERN_CRIT " car: %#lx\n", el.l->car);
+ if (el.l->esr & ESR_EAV) {
+ mem_error(el.l->esr, el.l->ear);
+ }
+ if (el.l->ioc_stat0 & IOC_ERR) {
+ ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
+ }
+ break;
+
+ default:
+ printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size);
+ }
+
+ /* Dump the logout area to give all info. */
+#ifdef CONFIG_VERBOSE_MCHECK
+ if (alpha_verbose_mcheck > 1) {
+ unsigned long * ptr = (unsigned long *) la_ptr;
+ long i;
+ for (i = 0; i < el.c->size / sizeof(long); i += 2) {
+ printk(KERN_CRIT " +%8lx %016lx %016lx\n",
+ i*sizeof(long), ptr[i], ptr[i+1]);
+ }
+ }
+#endif /* CONFIG_VERBOSE_MCHECK */
+}
+
+/*
+ * The following routines are needed to support the SPEED changing
+ * necessary to successfully manage the thermal problem on the AlphaBook1.
+ */
+
+void
+lca_clock_print(void)
+{
+ long pmr_reg;
+
+ pmr_reg = LCA_READ_PMR;
+
+ printk("Status of clock control:\n");
+ printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
+ printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
+ printk("\tInterrupt override is %s\n",
+ (pmr_reg & LCA_PMR_INTO) ? "on" : "off");
+ printk("\tDMA override is %s\n",
+ (pmr_reg & LCA_PMR_DMAO) ? "on" : "off");
+
+}
+
+int
+lca_get_clock(void)
+{
+ long pmr_reg;
+
+ pmr_reg = LCA_READ_PMR;
+ return(LCA_GET_PRIMARY(pmr_reg));
+
+}
+
+void
+lca_clock_fiddle(int divisor)
+{
+ long pmr_reg;
+
+ pmr_reg = LCA_READ_PMR;
+ LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
+ /* lca_norm_clock = divisor; */
+ LCA_WRITE_PMR(pmr_reg);
+ mb();
+}
