Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
new file mode 100644
index 0000000..5840424
--- /dev/null
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -0,0 +1,220 @@
+/*
+ * linux/arch/alpha/kernel/sys_rx164.c
+ *
+ * Copyright (C) 1995 David A Rusling
+ * Copyright (C) 1996 Jay A Estabrook
+ * Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the RX164 (PCA56+POLARIS).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_polaris.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs. */
+static unsigned long cached_irq_mask;
+
+static inline void
+rx164_update_irq_hw(unsigned long mask)
+{
+ volatile unsigned int *irq_mask;
+
+ irq_mask = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x74);
+ *irq_mask = mask;
+ mb();
+ *irq_mask;
+}
+
+static inline void
+rx164_enable_irq(unsigned int irq)
+{
+ rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+}
+
+static void
+rx164_disable_irq(unsigned int irq)
+{
+ rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+}
+
+static unsigned int
+rx164_startup_irq(unsigned int irq)
+{
+ rx164_enable_irq(irq);
+ return 0;
+}
+
+static void
+rx164_end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ rx164_enable_irq(irq);
+}
+
+static struct hw_interrupt_type rx164_irq_type = {
+ .typename = "RX164",
+ .startup = rx164_startup_irq,
+ .shutdown = rx164_disable_irq,
+ .enable = rx164_enable_irq,
+ .disable = rx164_disable_irq,
+ .ack = rx164_disable_irq,
+ .end = rx164_end_irq,
+};
+
+static void
+rx164_device_interrupt(unsigned long vector, struct pt_regs *regs)
+{
+ unsigned long pld;
+ volatile unsigned int *dirr;
+ long i;
+
+ /* Read the interrupt summary register. On Polaris, this is
+ the DIRR register in PCI config space (offset 0x84). */
+ dirr = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x84);
+ pld = *dirr;
+
+ /*
+ * Now for every possible bit set, work through them and call
+ * the appropriate interrupt handler.
+ */
+ while (pld) {
+ i = ffz(~pld);
+ pld &= pld - 1; /* clear least bit set */
+ if (i == 20) {
+ isa_no_iack_sc_device_interrupt(vector, regs);
+ } else {
+ handle_irq(16+i, regs);
+ }
+ }
+}
+
+static void __init
+rx164_init_irq(void)
+{
+ long i;
+
+ rx164_update_irq_hw(0);
+ for (i = 16; i < 40; ++i) {
+ irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
+ irq_desc[i].handler = &rx164_irq_type;
+ }
+
+ init_i8259a_irqs();
+ common_init_isa_dma();
+
+ setup_irq(16+20, &isa_cascade_irqaction);
+}
+
+
+/*
+ * The RX164 changed its interrupt routing between pass1 and pass2...
+ *
+ * PASS1:
+ *
+ * Slot IDSEL INTA INTB INTC INTD
+ * 0 6 5 10 15 20
+ * 1 7 4 9 14 19
+ * 2 5 3 8 13 18
+ * 3 9 2 7 12 17
+ * 4 10 1 6 11 16
+ *
+ * PASS2:
+ * Slot IDSEL INTA INTB INTC INTD
+ * 0 5 1 7 12 17
+ * 1 6 2 8 13 18
+ * 2 8 3 9 14 19
+ * 3 9 4 10 15 20
+ * 4 10 5 11 16 6
+ *
+ */
+
+/*
+ * IdSel
+ * 5 32 bit PCI option slot 0
+ * 6 64 bit PCI option slot 1
+ * 7 PCI-ISA bridge
+ * 7 64 bit PCI option slot 2
+ * 9 32 bit PCI option slot 3
+ * 10 PCI-PCI bridge
+ *
+ */
+
+static int __init
+rx164_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+#if 0
+ static char irq_tab_pass1[6][5] __initdata = {
+ /*INT INTA INTB INTC INTD */
+ { 16+3, 16+3, 16+8, 16+13, 16+18}, /* IdSel 5, slot 2 */
+ { 16+5, 16+5, 16+10, 16+15, 16+20}, /* IdSel 6, slot 0 */
+ { 16+4, 16+4, 16+9, 16+14, 16+19}, /* IdSel 7, slot 1 */
+ { -1, -1, -1, -1, -1}, /* IdSel 8, PCI/ISA bridge */
+ { 16+2, 16+2, 16+7, 16+12, 16+17}, /* IdSel 9, slot 3 */
+ { 16+1, 16+1, 16+6, 16+11, 16+16}, /* IdSel 10, slot 4 */
+ };
+#else
+ static char irq_tab[6][5] __initdata = {
+ /*INT INTA INTB INTC INTD */
+ { 16+0, 16+0, 16+6, 16+11, 16+16}, /* IdSel 5, slot 0 */
+ { 16+1, 16+1, 16+7, 16+12, 16+17}, /* IdSel 6, slot 1 */
+ { -1, -1, -1, -1, -1}, /* IdSel 7, PCI/ISA bridge */
+ { 16+2, 16+2, 16+8, 16+13, 16+18}, /* IdSel 8, slot 2 */
+ { 16+3, 16+3, 16+9, 16+14, 16+19}, /* IdSel 9, slot 3 */
+ { 16+4, 16+4, 16+10, 16+15, 16+5}, /* IdSel 10, PCI-PCI */
+ };
+#endif
+ const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
+
+ /* JRP - Need to figure out how to distinguish pass1 from pass2,
+ and use the correct table. */
+ return COMMON_TABLE_LOOKUP;
+}
+
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector rx164_mv __initmv = {
+ .vector_name = "RX164",
+ DO_EV5_MMU,
+ DO_DEFAULT_RTC,
+ DO_POLARIS_IO,
+ .machine_check = polaris_machine_check,
+ .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
+ .min_io_address = DEFAULT_IO_BASE,
+ .min_mem_address = DEFAULT_MEM_BASE,
+
+ .nr_irqs = 40,
+ .device_interrupt = rx164_device_interrupt,
+
+ .init_arch = polaris_init_arch,
+ .init_irq = rx164_init_irq,
+ .init_rtc = common_init_rtc,
+ .init_pci = common_init_pci,
+ .kill_arch = NULL,
+ .pci_map_irq = rx164_map_irq,
+ .pci_swizzle = common_swizzle,
+};
+ALIAS_MV(rx164)
