Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
new file mode 100644
index 0000000..068e0e5
--- /dev/null
+++ b/arch/mips/pci/pci-ip27.c
@@ -0,0 +1,489 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
+ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/sn/arch.h>
+#include <asm/pci/bridge.h>
+#include <asm/paccess.h>
+#include <asm/sn/intr.h>
+#include <asm/sn/sn0/hub.h>
+
+extern unsigned int allocate_irqno(void);
+
+/*
+ * Max #PCI busses we can handle; ie, max #PCI bridges.
+ */
+#define MAX_PCI_BUSSES 40
+
+/*
+ * Max #PCI devices (like scsi controllers) we handle on a bus.
+ */
+#define MAX_DEVICES_PER_PCIBUS 8
+
+/*
+ * XXX: No kmalloc available when we do our crosstalk scan,
+ * we should try to move it later in the boot process.
+ */
+static struct bridge_controller bridges[MAX_PCI_BUSSES];
+
+/*
+ * Translate from irq to software PCI bus number and PCI slot.
+ */
+struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];
+int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];
+
+/*
+ * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
+ * not really documented, so right now I can't write code which uses it.
+ * Therefore we use type 0 accesses for now even though they won't work
+ * correcly for PCI-to-PCI bridges.
+ *
+ * The function is complicated by the ultimate brokeness of the IOC3 chip
+ * which is used in SGI systems. The IOC3 can only handle 32-bit PCI
+ * accesses and does only decode parts of it's address space.
+ */
+
+static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ bridge_t *bridge = bc->base;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ volatile void *addr;
+ u32 cf, shift, mask;
+ int res;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto oh_my_gawd;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
+
+ if (size == 1)
+ res = get_dbe(*value, (u8 *) addr);
+ else if (size == 2)
+ res = get_dbe(*value, (u16 *) addr);
+ else
+ res = get_dbe(*value, (u32 *) addr);
+
+ return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+
+oh_my_gawd:
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at the wrong register.
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
+ *value = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't try to access
+ * anything but 32-bit words ...
+ */
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ *value = (cf >> shift) & mask;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ bridge_t *bridge = bc->base;
+ int busno = bus->number;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ volatile void *addr;
+ u32 cf, shift, mask;
+ int res;
+
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto oh_my_gawd;
+
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+ if (size == 1)
+ res = get_dbe(*value, (u8 *) addr);
+ else if (size == 2)
+ res = get_dbe(*value, (u16 *) addr);
+ else
+ res = get_dbe(*value, (u32 *) addr);
+
+ return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+
+oh_my_gawd:
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at the wrong register.
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
+ *value = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't try to access
+ * anything but 32-bit words ...
+ */
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
+
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ *value = (cf >> shift) & mask;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * value)
+{
+ if (bus->number > 0)
+ return pci_conf1_read_config(bus, devfn, where, size, value);
+
+ return pci_conf0_read_config(bus, devfn, where, size, value);
+}
+
+static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ bridge_t *bridge = bc->base;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ volatile void *addr;
+ u32 cf, shift, mask, smask;
+ int res;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto oh_my_gawd;
+
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
+
+ if (size == 1) {
+ res = put_dbe(value, (u8 *) addr);
+ } else if (size == 2) {
+ res = put_dbe(value, (u16 *) addr);
+ } else {
+ res = put_dbe(value, (u32 *) addr);
+ }
+
+ if (res)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+
+oh_my_gawd:
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to touch the wrong register.
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
+ return PCIBIOS_SUCCESSFUL;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't try to access
+ * anything but 32-bit words ...
+ */
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ smask = mask << shift;
+
+ cf = (cf & ~smask) | ((value & mask) << shift);
+ if (put_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ bridge_t *bridge = bc->base;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ int busno = bus->number;
+ volatile void *addr;
+ u32 cf, shift, mask, smask;
+ int res;
+
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto oh_my_gawd;
+
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+ if (size == 1) {
+ res = put_dbe(value, (u8 *) addr);
+ } else if (size == 2) {
+ res = put_dbe(value, (u16 *) addr);
+ } else {
+ res = put_dbe(value, (u32 *) addr);
+ }
+
+ if (res)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+
+oh_my_gawd:
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to touch the wrong register.
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
+ return PCIBIOS_SUCCESSFUL;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't try to access
+ * anything but 32-bit words ...
+ */
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ smask = mask << shift;
+
+ cf = (cf & ~smask) | ((value & mask) << shift);
+ if (put_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ if (bus->number > 0)
+ return pci_conf1_write_config(bus, devfn, where, size, value);
+
+ return pci_conf0_write_config(bus, devfn, where, size, value);
+}
+
+static struct pci_ops bridge_pci_ops = {
+ .read = pci_read_config,
+ .write = pci_write_config,
+};
+
+int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid)
+{
+ unsigned long offset = NODE_OFFSET(nasid);
+ struct bridge_controller *bc;
+ static int num_bridges = 0;
+ bridge_t *bridge;
+ int slot;
+
+ printk("a bridge\n");
+
+ /* XXX: kludge alert.. */
+ if (!num_bridges)
+ ioport_resource.end = ~0UL;
+
+ bc = &bridges[num_bridges];
+
+ bc->pc.pci_ops = &bridge_pci_ops;
+ bc->pc.mem_resource = &bc->mem;
+ bc->pc.io_resource = &bc->io;
+
+ bc->pc.index = num_bridges;
+
+ bc->mem.name = "Bridge PCI MEM";
+ bc->pc.mem_offset = offset;
+ bc->mem.start = 0;
+ bc->mem.end = ~0UL;
+ bc->mem.flags = IORESOURCE_MEM;
+
+ bc->io.name = "Bridge IO MEM";
+ bc->pc.io_offset = offset;
+ bc->io.start = 0UL;
+ bc->io.end = ~0UL;
+ bc->io.flags = IORESOURCE_IO;
+
+ bc->irq_cpu = smp_processor_id();
+ bc->widget_id = widget_id;
+ bc->nasid = nasid;
+
+ bc->baddr = (u64)masterwid << 60;
+ bc->baddr |= (1UL << 56); /* Barrier set */
+
+ /*
+ * point to this bridge
+ */
+ bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id);
+
+ /*
+ * Clear all pending interrupts.
+ */
+ bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR;
+
+ /*
+ * Until otherwise set up, assume all interrupts are from slot 0
+ */
+ bridge->b_int_device = 0x0;
+
+ /*
+ * swap pio's to pci mem and io space (big windows)
+ */
+ bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
+ BRIDGE_CTRL_MEM_SWAP;
+
+ /*
+ * Hmm... IRIX sets additional bits in the address which
+ * are documented as reserved in the bridge docs.
+ */
+ bridge->b_wid_int_upper = 0x8000 | (masterwid << 16);
+ bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/
+ bridge->b_dir_map = (masterwid << 20); /* DMA */
+ bridge->b_int_enable = 0;
+
+ for (slot = 0; slot < 8; slot ++) {
+ bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;
+ bc->pci_int[slot] = -1;
+ }
+ bridge->b_wid_tflush; /* wait until Bridge PIO complete */
+
+ bc->base = bridge;
+
+ register_pci_controller(&bc->pc);
+
+ num_bridges++;
+
+ return 0;
+}
+
+/*
+ * All observed requests have pin == 1. We could have a global here, that
+ * gets incremented and returned every time - unfortunately, pci_map_irq
+ * may be called on the same device over and over, and need to return the
+ * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
+ *
+ * A given PCI device, in general, should be able to intr any of the cpus
+ * on any one of the hubs connected to its xbow.
+ */
+int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ int irq = bc->pci_int[slot];
+
+ if (irq == -1) {
+ irq = bc->pci_int[slot] = request_bridge_irq(bc);
+ if (irq < 0)
+ panic("Can't allocate interrupt for PCI device %s\n",
+ pci_name(dev));
+ }
+
+ irq_to_bridge[irq] = bc;
+ irq_to_slot[irq] = slot;
+
+ return irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
+ * to find the slot number in sense of the bridge device register.
+ * XXX This also means multiple devices might rely on conflicting bridge
+ * settings.
+ */
+
+static inline void pci_disable_swapping(struct pci_dev *dev)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ bridge_t *bridge = bc->base;
+ int slot = PCI_SLOT(dev->devfn);
+
+ /* Turn off byte swapping */
+ bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
+ bridge->b_widget.w_tflush; /* Flush */
+}
+
+static inline void pci_enable_swapping(struct pci_dev *dev)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ bridge_t *bridge = bc->base;
+ int slot = PCI_SLOT(dev->devfn);
+
+ /* Turn on byte swapping */
+ bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;
+ bridge->b_widget.w_tflush; /* Flush */
+}
+
+static void __init pci_fixup_ioc3(struct pci_dev *d)
+{
+ pci_disable_swapping(d);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+ pci_fixup_ioc3);
