Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/acpi/events/evsci.c b/drivers/acpi/events/evsci.c
new file mode 100644
index 0000000..46b3199
--- /dev/null
+++ b/drivers/acpi/events/evsci.c
@@ -0,0 +1,199 @@
+/*******************************************************************************
+ *
+ * Module Name: evsci - System Control Interrupt configuration and
+ *                      legacy to ACPI mode state transition functions
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/acevents.h>
+
+
+#define _COMPONENT          ACPI_EVENTS
+	 ACPI_MODULE_NAME    ("evsci")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_sci_xrupt_handler
+ *
+ * PARAMETERS:  Context   - Calling Context
+ *
+ * RETURN:      Status code indicates whether interrupt was handled.
+ *
+ * DESCRIPTION: Interrupt handler that will figure out what function or
+ *              control method to call to deal with a SCI.
+ *
+ ******************************************************************************/
+
+static u32 ACPI_SYSTEM_XFACE
+acpi_ev_sci_xrupt_handler (
+	void                            *context)
+{
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_list = context;
+	u32                             interrupt_handled = ACPI_INTERRUPT_NOT_HANDLED;
+
+
+	ACPI_FUNCTION_TRACE("ev_sci_xrupt_handler");
+
+
+	/*
+	 * We are guaranteed by the ACPI CA initialization/shutdown code that
+	 * if this interrupt handler is installed, ACPI is enabled.
+	 */
+
+	/*
+	 * Fixed Events:
+	 * Check for and dispatch any Fixed Events that have occurred
+	 */
+	interrupt_handled |= acpi_ev_fixed_event_detect ();
+
+	/*
+	 * General Purpose Events:
+	 * Check for and dispatch any GPEs that have occurred
+	 */
+	interrupt_handled |= acpi_ev_gpe_detect (gpe_xrupt_list);
+
+	return_VALUE (interrupt_handled);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_gpe_xrupt_handler
+ *
+ * PARAMETERS:  Context   - Calling Context
+ *
+ * RETURN:      Status code indicates whether interrupt was handled.
+ *
+ * DESCRIPTION: Handler for GPE Block Device interrupts
+ *
+ ******************************************************************************/
+
+u32 ACPI_SYSTEM_XFACE
+acpi_ev_gpe_xrupt_handler (
+	void                            *context)
+{
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_list = context;
+	u32                             interrupt_handled = ACPI_INTERRUPT_NOT_HANDLED;
+
+
+	ACPI_FUNCTION_TRACE("ev_gpe_xrupt_handler");
+
+
+	/*
+	 * We are guaranteed by the ACPI CA initialization/shutdown code that
+	 * if this interrupt handler is installed, ACPI is enabled.
+	 */
+
+	/*
+	 * GPEs:
+	 * Check for and dispatch any GPEs that have occurred
+	 */
+	interrupt_handled |= acpi_ev_gpe_detect (gpe_xrupt_list);
+
+	return_VALUE (interrupt_handled);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_install_sci_handler
+ *
+ * PARAMETERS:  none
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Installs SCI handler.
+ *
+ ******************************************************************************/
+
+u32
+acpi_ev_install_sci_handler (void)
+{
+	u32                             status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ev_install_sci_handler");
+
+
+	status = acpi_os_install_interrupt_handler ((u32) acpi_gbl_FADT->sci_int,
+			   acpi_ev_sci_xrupt_handler, acpi_gbl_gpe_xrupt_list_head);
+	return_ACPI_STATUS (status);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_remove_sci_handler
+ *
+ * PARAMETERS:  none
+ *
+ * RETURN:      E_OK if handler uninstalled OK, E_ERROR if handler was not
+ *              installed to begin with
+ *
+ * DESCRIPTION: Remove the SCI interrupt handler.  No further SCIs will be
+ *              taken.
+ *
+ * Note:  It doesn't seem important to disable all events or set the event
+ *        enable registers to their original values.  The OS should disable
+ *        the SCI interrupt level when the handler is removed, so no more
+ *        events will come in.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_remove_sci_handler (void)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ev_remove_sci_handler");
+
+
+	/* Just let the OS remove the handler and disable the level */
+
+	status = acpi_os_remove_interrupt_handler ((u32) acpi_gbl_FADT->sci_int,
+			   acpi_ev_sci_xrupt_handler);
+
+	return_ACPI_STATUS (status);
+}
+
+