Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
new file mode 100644
index 0000000..23d0fa4
--- /dev/null
+++ b/drivers/net/tokenring/Kconfig
@@ -0,0 +1,186 @@
+#
+# Token Ring driver configuration
+#
+
+menu "Token Ring devices"
+ depends on NETDEVICES
+
+# So far, we only have PCI, ISA, and MCA token ring devices
+config TR
+ bool "Token Ring driver support"
+ depends on (PCI || ISA || MCA || CCW)
+ select LLC
+ help
+ Token Ring is IBM's way of communication on a local network; the
+ rest of the world uses Ethernet. To participate on a Token Ring
+ network, you need a special Token ring network card. If you are
+ connected to such a Token Ring network and want to use your Token
+ Ring card under Linux, say Y here and to the driver for your
+ particular card below and read the Token-Ring mini-HOWTO, available
+ from <http://www.tldp.org/docs.html#howto>. Most people can
+ say N here.
+
+config IBMTR
+ tristate "IBM Tropic chipset based adapter support"
+ depends on TR && (ISA || MCA)
+ ---help---
+ This is support for all IBM Token Ring cards that don't use DMA. If
+ you have such a beast, say Y and read the Token-Ring mini-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ Warning: this driver will almost definitely fail if more than one
+ active Token Ring card is present.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ibmtr.
+
+config IBMOL
+ tristate "IBM Olympic chipset PCI adapter support"
+ depends on TR && PCI
+ ---help---
+ This is support for all non-Lanstreamer IBM PCI Token Ring Cards.
+ Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II
+ Wake On Lan, and PCI 100/16/4 adapters.
+
+ If you have such an adapter, say Y and read the Token-Ring
+ mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called olympic.
+
+ Also read <file:Documentation/networking/olympic.txt> or check the
+ Linux Token Ring Project site for the latest information at
+ <http://www.linuxtr.net/>.
+
+config IBMLS
+ tristate "IBM Lanstreamer chipset PCI adapter support"
+ depends on TR && PCI && !64BIT
+ help
+ This is support for IBM Lanstreamer PCI Token Ring Cards.
+
+ If you have such an adapter, say Y and read the Token-Ring
+ mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called lanstreamer.
+
+config 3C359
+ tristate "3Com 3C359 Token Link Velocity XL adapter support"
+ depends on TR && PCI
+ ---help---
+ This is support for the 3Com PCI Velocity XL cards, specifically
+ the 3Com 3C359, please note this is not for the 3C339 cards, you
+ should use the tms380 driver instead.
+
+ If you have such an adapter, say Y and read the Token-Ring
+ mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c359.
+
+ Also read the file <file:Documentation/networking/3c359.txt> or check the
+ Linux Token Ring Project site for the latest information at
+ <http://www.linuxtr.net>
+
+config TMS380TR
+ tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
+ depends on TR && (PCI || ISA)
+ select FW_LOADER
+ ---help---
+ This driver provides generic support for token ring adapters
+ based on the Texas Instruments TMS380 series chipsets. This
+ includes the SysKonnect TR4/16(+) ISA (SK-4190), SysKonnect
+ TR4/16(+) PCI (SK-4590), SysKonnect TR4/16 PCI (SK-4591),
+ Compaq 4/16 PCI, Thomas-Conrad TC4048 4/16 PCI, and several
+ Madge adapters. If you say Y here, you will be asked to select
+ which cards to support below. If you're using modules, each
+ class of card will be supported by a separate module.
+
+ If you have such an adapter and would like to use it, say Y and
+ read the Token-Ring mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Also read the file <file:Documentation/networking/tms380tr.txt> or
+ check <http://www.auk.cx/tms380tr/>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called tms380tr.
+
+config TMSPCI
+ tristate "Generic TMS380 PCI support"
+ depends on TR && TMS380TR && PCI
+ ---help---
+ This tms380 module supports generic TMS380-based PCI cards.
+
+ These cards are known to work:
+ - Compaq 4/16 TR PCI
+ - SysKonnect TR4/16 PCI (SK-4590/SK-4591)
+ - Thomas-Conrad TC4048 PCI 4/16
+ - 3Com Token Link Velocity
+
+ To compile this driver as a module, choose M here: the module will be
+ called tmspci.
+
+config SKISA
+ tristate "SysKonnect TR4/16 ISA support"
+ depends on TR && TMS380TR && ISA
+ help
+ This tms380 module supports SysKonnect TR4/16 ISA cards.
+
+ These cards are known to work:
+ - SysKonnect TR4/16 ISA (SK-4190)
+
+ To compile this driver as a module, choose M here: the module will be
+ called skisa.
+
+config PROTEON
+ tristate "Proteon ISA support"
+ depends on TR && TMS380TR && ISA
+ help
+ This tms380 module supports Proteon ISA cards.
+
+ These cards are known to work:
+ - Proteon 1392
+ - Proteon 1392 plus
+
+ To compile this driver as a module, choose M here: the module will be
+ called proteon.
+
+config ABYSS
+ tristate "Madge Smart 16/4 PCI Mk2 support"
+ depends on TR && TMS380TR && PCI
+ help
+ This tms380 module supports the Madge Smart 16/4 PCI Mk2
+ cards (51-02).
+
+ To compile this driver as a module, choose M here: the module will be
+ called abyss.
+
+config MADGEMC
+ tristate "Madge Smart 16/4 Ringnode MicroChannel"
+ depends on TR && TMS380TR && MCA_LEGACY
+ help
+ This tms380 module supports the Madge Smart 16/4 MC16 and MC32
+ MicroChannel adapters.
+
+ To compile this driver as a module, choose M here: the module will be
+ called madgemc.
+
+config SMCTR
+ tristate "SMC ISA/MCA adapter support"
+ depends on TR && (ISA || MCA_LEGACY) && (BROKEN || !64BIT)
+ ---help---
+ This is support for the ISA and MCA SMC Token Ring cards,
+ specifically SMC TokenCard Elite (8115T) and SMC TokenCard Elite/A
+ (8115T/A) adapters.
+
+ If you have such an adapter and would like to use it, say Y or M and
+ read the Token-Ring mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto> and the file
+ <file:Documentation/networking/smctr.txt>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called smctr.
+
+endmenu
+
