Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
new file mode 100644
index 0000000..6375ebc
--- /dev/null
+++ b/drivers/pcmcia/Kconfig
@@ -0,0 +1,203 @@
+#
+# PCMCIA bus subsystem configuration
+#
+# Right now the non-CardBus choices are not supported
+# by the integrated kernel driver.
+#
+
+menu "PCCARD (PCMCIA/CardBus) support"
+
+config PCCARD
+ tristate "PCCard (PCMCIA/CardBus) support"
+ select HOTPLUG
+ ---help---
+ Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+ computer. These are credit-card size devices such as network cards,
+ modems or hard drives often used with laptops computers. There are
+ actually two varieties of these cards: the older 16 bit PCMCIA cards
+ and the newer 32 bit CardBus cards.
+
+ To compile this driver as modules, choose M here: the
+ module will be called pcmcia_core.
+
+if PCCARD
+
+config PCMCIA_DEBUG
+ bool "Enable PCCARD debugging"
+ help
+ Say Y here to enable PCMCIA subsystem debugging. You
+ will need to choose the debugging level either via the
+ kernel command line, or module options depending whether
+ you build the PCMCIA as modules.
+
+ The kernel command line options are:
+ pcmcia_core.pc_debug=N
+ ds.pc_debug=N
+ sa11xx_core.pc_debug=N
+
+ The module option is called pc_debug=N
+
+ In all the above examples, N is the debugging verbosity
+ level.
+
+config PCMCIA
+ tristate "16-bit PCMCIA support"
+ default y
+ ---help---
+ This option enables support for 16-bit PCMCIA cards. Most older
+ PC-cards are such 16-bit PCMCIA cards, so unless you know you're
+ only using 32-bit CardBus cards, say Y or M here.
+
+ To use 16-bit PCMCIA cards, you will need supporting software from
+ David Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). Please also read the PCMCIA-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as modules, choose M here: the
+ module will be called pcmcia.
+
+ If unsure, say Y.
+
+config CARDBUS
+ bool "32-bit CardBus support"
+ depends on PCI
+ default y
+ ---help---
+ CardBus is a bus mastering architecture for PC-cards, which allows
+ for 32 bit PC-cards (the original PCMCIA standard specifies only
+ a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
+
+ To use 32 bit PC-cards, you also need a CardBus compatible host
+ bridge. Virtually all modern PCMCIA bridges do this, and most of
+ them are "yenta-compatible", so say Y or M there, too.
+
+ If unsure, say Y.
+
+comment "PC-card bridges"
+
+config YENTA
+ tristate "CardBus yenta-compatible bridge support"
+ depends on PCI
+#fixme: remove dependendcy on CARDBUS
+ depends on CARDBUS
+ select PCCARD_NONSTATIC
+ ---help---
+ This option enables support for CardBus host bridges. Virtually
+ all modern PCMCIA bridges are CardBus compatible. A "bridge" is
+ the hardware inside your computer that PCMCIA cards are plugged
+ into.
+
+ To compile this driver as modules, choose M here: the
+ module will be called yenta_socket.
+
+ If unsure, say Y.
+
+config PD6729
+ tristate "Cirrus PD6729 compatible bridge support"
+ depends on PCMCIA && PCI
+ select PCCARD_NONSTATIC
+ help
+ This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
+ device, found in some older laptops and PCMCIA card readers.
+
+config I82092
+ tristate "i82092 compatible bridge support"
+ depends on PCMCIA && PCI
+ select PCCARD_NONSTATIC
+ help
+ This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
+ found in some older laptops and more commonly in evaluation boards for the
+ chip.
+
+config I82365
+ tristate "i82365 compatible bridge support"
+ depends on PCMCIA && ISA
+ select PCCARD_NONSTATIC
+ help
+ Say Y here to include support for ISA-bus PCMCIA host bridges that
+ are register compatible with the Intel i82365. These are found on
+ older laptops and ISA-bus card readers for desktop systems. A
+ "bridge" is the hardware inside your computer that PCMCIA cards are
+ plugged into. If unsure, say N.
+
+config TCIC
+ tristate "Databook TCIC host bridge support"
+ depends on PCMCIA
+ select PCCARD_NONSTATIC
+ help
+ Say Y here to include support for the Databook TCIC family of PCMCIA
+ host bridges. These are only found on a handful of old systems.
+ "Bridge" is the name used for the hardware inside your computer that
+ PCMCIA cards are plugged into. If unsure, say N.
+
+config HD64465_PCMCIA
+ tristate "HD64465 host bridge support"
+ depends on HD64465 && PCMCIA
+
+config PCMCIA_AU1X00
+ tristate "Au1x00 pcmcia support"
+ depends on SOC_AU1X00 && PCMCIA
+
+config PCMCIA_SA1100
+ tristate "SA1100 support"
+ depends on ARM && ARCH_SA1100 && PCMCIA
+ help
+ Say Y here to include support for SA11x0-based PCMCIA or CF
+ sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
+ Xscale(R) embedded machines.
+
+ This driver is also available as a module called sa1100_cs.
+
+config PCMCIA_SA1111
+ tristate "SA1111 support"
+ depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
+ help
+ Say Y here to include support for SA1111-based PCMCIA or CF
+ sockets, found on the Jornada 720, Graphicsmaster and other
+ StrongARM(R)/Xscale(R) embedded machines.
+
+ This driver is also available as a module called sa1111_cs.
+
+config PCMCIA_PXA2XX
+ tristate "PXA2xx support"
+ depends on ARM && ARCH_PXA && PCMCIA
+ help
+ Say Y here to include support for the PXA2xx PCMCIA controller
+
+config PCMCIA_PROBE
+ bool
+ default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
+
+config M32R_PCC
+ bool "M32R PCMCIA I/F"
+ depends on M32R && CHIP_M32700 && PCMCIA
+ help
+ Say Y here to use the M32R PCMCIA controller.
+
+config M32R_CFC
+ bool "M32R CF I/F Controller"
+ depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT)
+ help
+ Say Y here to use the M32R CompactFlash controller.
+
+config M32R_CFC_NUM
+ int "M32R CF I/F number"
+ depends on M32R_CFC
+ default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT
+ help
+ Set the number of M32R CF slots.
+
+config PCMCIA_VRC4171
+ tristate "NEC VRC4171 Card Controllers support"
+ depends on VRC4171 && PCMCIA
+
+config PCMCIA_VRC4173
+ tristate "NEC VRC4173 CARDU support"
+ depends on CPU_VR41XX && PCI && PCMCIA
+
+config PCCARD_NONSTATIC
+ tristate
+
+endif # PCCARD
+
+endmenu
