Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
new file mode 100644
index 0000000..a8993a0
--- /dev/null
+++ b/net/ax25/Kconfig
@@ -0,0 +1,110 @@
+#
+# Amateur Radio protocols and AX.25 device configuration
+#
+# 19971130 Now in an own category to make correct compilation of the
+# AX.25 stuff easier...
+# Joerg Reuter DL1BKE <jreuter@yaina.de>
+# 19980129 Moved to net/ax25/Config.in, sourcing device drivers.
+
+menuconfig HAMRADIO
+ depends on NET
+ bool "Amateur Radio support"
+ help
+ If you want to connect your Linux box to an amateur radio, answer Y
+ here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
+ the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about amateur radio.
+
+comment "Packet Radio protocols"
+ depends on HAMRADIO && NET
+
+config AX25
+ tristate "Amateur Radio AX.25 Level 2 protocol"
+ depends on HAMRADIO && NET
+ ---help---
+ This is the protocol used for computer communication over amateur
+ radio. It is either used by itself for point-to-point links, or to
+ carry other protocols such as tcp/ip. To use it, you need a device
+ that connects your Linux box to your amateur radio. You can either
+ use a low speed TNC (a Terminal Node Controller acts as a kind of
+ modem connecting your computer's serial port to your radio's
+ microphone input and speaker output) supporting the KISS protocol or
+ one of the various SCC cards that are supported by the generic Z8530
+ or the DMA SCC driver. Another option are the Baycom modem serial
+ and parallel port hacks or the sound card modem (supported by their
+ own drivers). If you say Y here, you also have to say Y to one of
+ those drivers.
+
+ Information about where to get supporting software for Linux amateur
+ radio as well as information about how to configure an AX.25 port is
+ contained in the AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You might also want to
+ check out the file <file:Documentation/networking/ax25.txt> in the
+ kernel source. More information about digital amateur radio in
+ general is on the WWW at
+ <http://www.tapr.org/tapr/html/pkthome.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ax25.
+
+config AX25_DAMA_SLAVE
+ bool "AX.25 DAMA Slave support"
+ depends on AX25
+ help
+ DAMA is a mechanism to prevent collisions when doing AX.25
+ networking. A DAMA server (called "master") accepts incoming traffic
+ from clients (called "slaves") and redistributes it to other slaves.
+ If you say Y here, your Linux box will act as a DAMA slave; this is
+ transparent in that you don't have to do any special DAMA
+ configuration. (Linux cannot yet act as a DAMA server.) If unsure,
+ say N.
+
+# bool ' AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
+config NETROM
+ tristate "Amateur Radio NET/ROM protocol"
+ depends on AX25
+ ---help---
+ NET/ROM is a network layer protocol on top of AX.25 useful for
+ routing.
+
+ A comprehensive listing of all the software for Linux amateur radio
+ users as well as information about how to configure an AX.25 port is
+ contained in the AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You also might want to
+ check out the file <file:Documentation/networking/ax25.txt>. More
+ information about digital amateur radio in general is on the WWW at
+ <http://www.tapr.org/tapr/html/pkthome.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called netrom.
+
+config ROSE
+ tristate "Amateur Radio X.25 PLP (Rose)"
+ depends on AX25
+ ---help---
+ The Packet Layer Protocol (PLP) is a way to route packets over X.25
+ connections in general and amateur radio AX.25 connections in
+ particular, essentially an alternative to NET/ROM.
+
+ A comprehensive listing of all the software for Linux amateur radio
+ users as well as information about how to configure an AX.25 port is
+ contained in the AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You also might want to
+ check out the file <file:Documentation/networking/ax25.txt>. More
+ information about digital amateur radio in general is on the WWW at
+ <http://www.tapr.org/tapr/html/pkthome.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rose.
+
+
+menu "AX.25 network device drivers"
+ depends on HAMRADIO && NET && AX25!=n
+
+source "drivers/net/hamradio/Kconfig"
+
+endmenu
+
diff --git a/net/ax25/Makefile b/net/ax25/Makefile
new file mode 100644
index 0000000..43c46d2
--- /dev/null
+++ b/net/ax25/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Linux AX.25 layer.
+#
+
+obj-$(CONFIG_AX25) += ax25.o
+
+ax25-y := ax25_addr.o ax25_dev.o ax25_iface.o ax25_in.o ax25_ip.o ax25_out.o \
+ ax25_route.o ax25_std_in.o ax25_std_subr.o ax25_std_timer.o \
+ ax25_subr.o ax25_timer.o ax25_uid.o af_ax25.o
+ax25-$(CONFIG_AX25_DAMA_SLAVE) += ax25_ds_in.o ax25_ds_subr.o ax25_ds_timer.o
+ax25-$(CONFIG_SYSCTL) += sysctl_net_ax25.o
diff --git a/net/ax25/TODO b/net/ax25/TODO
new file mode 100644
index 0000000..4089c49
--- /dev/null
+++ b/net/ax25/TODO
@@ -0,0 +1,24 @@
+Do the ax25_list_lock, ax25_dev_lock, linkfail_lockreally, ax25_frag_lock and
+listen_lock have to be bh-safe?
+
+Do the netrom and rose locks have to be bh-safe?
+
+A device might be deleted after lookup in the SIOCADDRT ioctl but before it's
+being used.
+
+Routes to a device being taken down might be deleted by ax25_rt_device_down
+but added by somebody else before the device has been deleted fully.
+
+Massive amounts of lock_kernel / unlock_kernel are just a temporary solution to
+get around the removal of SOCKOPS_WRAP. A serious locking strategy has to be
+implemented.
+
+The ax25_rt_find_route synopsys is pervert but I somehow had to deal with
+the race caused by the static variable in it's previous implementation.
+
+Implement proper socket locking in netrom and rose.
+
+Check socket locking when ax25_rcv is sending to raw sockets. In particular
+ax25_send_to_raw() seems fishy. Heck - ax25_rcv is fishy.
+
+Handle XID and TEST frames properly.
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
new file mode 100644
index 0000000..33b1a37
--- /dev/null
+++ b/net/ax25/af_ax25.c
@@ -0,0 +1,2050 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Darryl Miles G7LED (dlm@g7led.demon.co.uk)
+ * Copyright (C) Steven Whitehouse GW7RRM (stevew@acm.org)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Hans-Joachim Hetscher DD8NE (dd8ne@bnv-bamberg.de)
+ * Copyright (C) Hans Alblas PE1AYX (hans@esrac.ele.tue.nl)
+ * Copyright (C) Frederic Rible F1OAT (frible@teaser.fr)
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/smp_lock.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/termios.h> /* For TIOCINQ/OUTQ */
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/netfilter.h>
+#include <linux/sysctl.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <net/tcp.h>
+#include <net/ip.h>
+#include <net/arp.h>
+
+
+
+HLIST_HEAD(ax25_list);
+DEFINE_SPINLOCK(ax25_list_lock);
+
+static struct proto_ops ax25_proto_ops;
+
+static void ax25_free_sock(struct sock *sk)
+{
+ ax25_cb_put(ax25_sk(sk));
+}
+
+/*
+ * Socket removal during an interrupt is now safe.
+ */
+static void ax25_cb_del(ax25_cb *ax25)
+{
+ if (!hlist_unhashed(&ax25->ax25_node)) {
+ spin_lock_bh(&ax25_list_lock);
+ hlist_del_init(&ax25->ax25_node);
+ spin_unlock_bh(&ax25_list_lock);
+ ax25_cb_put(ax25);
+ }
+}
+
+/*
+ * Kill all bound sockets on a dropped device.
+ */
+static void ax25_kill_by_device(struct net_device *dev)
+{
+ ax25_dev *ax25_dev;
+ ax25_cb *s;
+ struct hlist_node *node;
+
+ if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
+ return;
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(s, node, &ax25_list) {
+ if (s->ax25_dev == ax25_dev) {
+ s->ax25_dev = NULL;
+ ax25_disconnect(s, ENETUNREACH);
+ }
+ }
+ spin_unlock_bh(&ax25_list_lock);
+}
+
+/*
+ * Handle device status changes.
+ */
+static int ax25_device_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ struct net_device *dev = (struct net_device *)ptr;
+
+ /* Reject non AX.25 devices */
+ if (dev->type != ARPHRD_AX25)
+ return NOTIFY_DONE;
+
+ switch (event) {
+ case NETDEV_UP:
+ ax25_dev_device_up(dev);
+ break;
+ case NETDEV_DOWN:
+ ax25_kill_by_device(dev);
+ ax25_rt_device_down(dev);
+ ax25_dev_device_down(dev);
+ break;
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+/*
+ * Add a socket to the bound sockets list.
+ */
+void ax25_cb_add(ax25_cb *ax25)
+{
+ spin_lock_bh(&ax25_list_lock);
+ ax25_cb_hold(ax25);
+ hlist_add_head(&ax25->ax25_node, &ax25_list);
+ spin_unlock_bh(&ax25_list_lock);
+}
+
+/*
+ * Find a socket that wants to accept the SABM we have just
+ * received.
+ */
+struct sock *ax25_find_listener(ax25_address *addr, int digi,
+ struct net_device *dev, int type)
+{
+ ax25_cb *s;
+ struct hlist_node *node;
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(s, node, &ax25_list) {
+ if ((s->iamdigi && !digi) || (!s->iamdigi && digi))
+ continue;
+ if (s->sk && !ax25cmp(&s->source_addr, addr) &&
+ s->sk->sk_type == type && s->sk->sk_state == TCP_LISTEN) {
+ /* If device is null we match any device */
+ if (s->ax25_dev == NULL || s->ax25_dev->dev == dev) {
+ sock_hold(s->sk);
+ spin_unlock_bh(&ax25_list_lock);
+ return s->sk;
+ }
+ }
+ }
+ spin_unlock_bh(&ax25_list_lock);
+
+ return NULL;
+}
+
+/*
+ * Find an AX.25 socket given both ends.
+ */
+struct sock *ax25_get_socket(ax25_address *my_addr, ax25_address *dest_addr,
+ int type)
+{
+ struct sock *sk = NULL;
+ ax25_cb *s;
+ struct hlist_node *node;
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(s, node, &ax25_list) {
+ if (s->sk && !ax25cmp(&s->source_addr, my_addr) &&
+ !ax25cmp(&s->dest_addr, dest_addr) &&
+ s->sk->sk_type == type) {
+ sk = s->sk;
+ sock_hold(sk);
+ break;
+ }
+ }
+
+ spin_unlock_bh(&ax25_list_lock);
+
+ return sk;
+}
+
+/*
+ * Find an AX.25 control block given both ends. It will only pick up
+ * floating AX.25 control blocks or non Raw socket bound control blocks.
+ */
+ax25_cb *ax25_find_cb(ax25_address *src_addr, ax25_address *dest_addr,
+ ax25_digi *digi, struct net_device *dev)
+{
+ ax25_cb *s;
+ struct hlist_node *node;
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(s, node, &ax25_list) {
+ if (s->sk && s->sk->sk_type != SOCK_SEQPACKET)
+ continue;
+ if (s->ax25_dev == NULL)
+ continue;
+ if (ax25cmp(&s->source_addr, src_addr) == 0 && ax25cmp(&s->dest_addr, dest_addr) == 0 && s->ax25_dev->dev == dev) {
+ if (digi != NULL && digi->ndigi != 0) {
+ if (s->digipeat == NULL)
+ continue;
+ if (ax25digicmp(s->digipeat, digi) != 0)
+ continue;
+ } else {
+ if (s->digipeat != NULL && s->digipeat->ndigi != 0)
+ continue;
+ }
+ ax25_cb_hold(s);
+ spin_unlock_bh(&ax25_list_lock);
+
+ return s;
+ }
+ }
+ spin_unlock_bh(&ax25_list_lock);
+
+ return NULL;
+}
+
+void ax25_send_to_raw(ax25_address *addr, struct sk_buff *skb, int proto)
+{
+ ax25_cb *s;
+ struct sk_buff *copy;
+ struct hlist_node *node;
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(s, node, &ax25_list) {
+ if (s->sk != NULL && ax25cmp(&s->source_addr, addr) == 0 &&
+ s->sk->sk_type == SOCK_RAW &&
+ s->sk->sk_protocol == proto &&
+ s->ax25_dev->dev == skb->dev &&
+ atomic_read(&s->sk->sk_rmem_alloc) <= s->sk->sk_rcvbuf) {
+ if ((copy = skb_clone(skb, GFP_ATOMIC)) == NULL)
+ continue;
+ if (sock_queue_rcv_skb(s->sk, copy) != 0)
+ kfree_skb(copy);
+ }
+ }
+ spin_unlock_bh(&ax25_list_lock);
+}
+
+/*
+ * Deferred destroy.
+ */
+void ax25_destroy_socket(ax25_cb *);
+
+/*
+ * Handler for deferred kills.
+ */
+static void ax25_destroy_timer(unsigned long data)
+{
+ ax25_cb *ax25=(ax25_cb *)data;
+ struct sock *sk;
+
+ sk=ax25->sk;
+
+ bh_lock_sock(sk);
+ sock_hold(sk);
+ ax25_destroy_socket(ax25);
+ bh_unlock_sock(sk);
+ sock_put(sk);
+}
+
+/*
+ * This is called from user mode and the timers. Thus it protects itself
+ * against interrupt users but doesn't worry about being called during
+ * work. Once it is removed from the queue no interrupt or bottom half
+ * will touch it and we are (fairly 8-) ) safe.
+ */
+void ax25_destroy_socket(ax25_cb *ax25)
+{
+ struct sk_buff *skb;
+
+ ax25_cb_del(ax25);
+
+ ax25_stop_heartbeat(ax25);
+ ax25_stop_t1timer(ax25);
+ ax25_stop_t2timer(ax25);
+ ax25_stop_t3timer(ax25);
+ ax25_stop_idletimer(ax25);
+
+ ax25_clear_queues(ax25); /* Flush the queues */
+
+ if (ax25->sk != NULL) {
+ while ((skb = skb_dequeue(&ax25->sk->sk_receive_queue)) != NULL) {
+ if (skb->sk != ax25->sk) {
+ /* A pending connection */
+ ax25_cb *sax25 = ax25_sk(skb->sk);
+
+ /* Queue the unaccepted socket for death */
+ sock_orphan(skb->sk);
+
+ ax25_start_heartbeat(sax25);
+ sax25->state = AX25_STATE_0;
+ }
+
+ kfree_skb(skb);
+ }
+ skb_queue_purge(&ax25->sk->sk_write_queue);
+ }
+
+ if (ax25->sk != NULL) {
+ if (atomic_read(&ax25->sk->sk_wmem_alloc) ||
+ atomic_read(&ax25->sk->sk_rmem_alloc)) {
+ /* Defer: outstanding buffers */
+ init_timer(&ax25->dtimer);
+ ax25->dtimer.expires = jiffies + 2 * HZ;
+ ax25->dtimer.function = ax25_destroy_timer;
+ ax25->dtimer.data = (unsigned long)ax25;
+ add_timer(&ax25->dtimer);
+ } else {
+ struct sock *sk=ax25->sk;
+ ax25->sk=NULL;
+ sock_put(sk);
+ }
+ } else {
+ ax25_cb_put(ax25);
+ }
+}
+
+/*
+ * dl1bke 960311: set parameters for existing AX.25 connections,
+ * includes a KILL command to abort any connection.
+ * VERY useful for debugging ;-)
+ */
+static int ax25_ctl_ioctl(const unsigned int cmd, void __user *arg)
+{
+ struct ax25_ctl_struct ax25_ctl;
+ ax25_digi digi;
+ ax25_dev *ax25_dev;
+ ax25_cb *ax25;
+ unsigned int k;
+
+ if (copy_from_user(&ax25_ctl, arg, sizeof(ax25_ctl)))
+ return -EFAULT;
+
+ if ((ax25_dev = ax25_addr_ax25dev(&ax25_ctl.port_addr)) == NULL)
+ return -ENODEV;
+
+ if (ax25_ctl.digi_count > AX25_MAX_DIGIS)
+ return -EINVAL;
+
+ digi.ndigi = ax25_ctl.digi_count;
+ for (k = 0; k < digi.ndigi; k++)
+ digi.calls[k] = ax25_ctl.digi_addr[k];
+
+ if ((ax25 = ax25_find_cb(&ax25_ctl.source_addr, &ax25_ctl.dest_addr, &digi, ax25_dev->dev)) == NULL)
+ return -ENOTCONN;
+
+ switch (ax25_ctl.cmd) {
+ case AX25_KILL:
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ if (ax25_dev->dama.slave && ax25->ax25_dev->values[AX25_VALUES_PROTOCOL] == AX25_PROTO_DAMA_SLAVE)
+ ax25_dama_off(ax25);
+#endif
+ ax25_disconnect(ax25, ENETRESET);
+ break;
+
+ case AX25_WINDOW:
+ if (ax25->modulus == AX25_MODULUS) {
+ if (ax25_ctl.arg < 1 || ax25_ctl.arg > 7)
+ return -EINVAL;
+ } else {
+ if (ax25_ctl.arg < 1 || ax25_ctl.arg > 63)
+ return -EINVAL;
+ }
+ ax25->window = ax25_ctl.arg;
+ break;
+
+ case AX25_T1:
+ if (ax25_ctl.arg < 1)
+ return -EINVAL;
+ ax25->rtt = (ax25_ctl.arg * HZ) / 2;
+ ax25->t1 = ax25_ctl.arg * HZ;
+ break;
+
+ case AX25_T2:
+ if (ax25_ctl.arg < 1)
+ return -EINVAL;
+ ax25->t2 = ax25_ctl.arg * HZ;
+ break;
+
+ case AX25_N2:
+ if (ax25_ctl.arg < 1 || ax25_ctl.arg > 31)
+ return -EINVAL;
+ ax25->n2count = 0;
+ ax25->n2 = ax25_ctl.arg;
+ break;
+
+ case AX25_T3:
+ if (ax25_ctl.arg < 0)
+ return -EINVAL;
+ ax25->t3 = ax25_ctl.arg * HZ;
+ break;
+
+ case AX25_IDLE:
+ if (ax25_ctl.arg < 0)
+ return -EINVAL;
+ ax25->idle = ax25_ctl.arg * 60 * HZ;
+ break;
+
+ case AX25_PACLEN:
+ if (ax25_ctl.arg < 16 || ax25_ctl.arg > 65535)
+ return -EINVAL;
+ ax25->paclen = ax25_ctl.arg;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Fill in a created AX.25 created control block with the default
+ * values for a particular device.
+ */
+void ax25_fillin_cb(ax25_cb *ax25, ax25_dev *ax25_dev)
+{
+ ax25->ax25_dev = ax25_dev;
+
+ if (ax25->ax25_dev != NULL) {
+ ax25->rtt = ax25_dev->values[AX25_VALUES_T1] / 2;
+ ax25->t1 = ax25_dev->values[AX25_VALUES_T1];
+ ax25->t2 = ax25_dev->values[AX25_VALUES_T2];
+ ax25->t3 = ax25_dev->values[AX25_VALUES_T3];
+ ax25->n2 = ax25_dev->values[AX25_VALUES_N2];
+ ax25->paclen = ax25_dev->values[AX25_VALUES_PACLEN];
+ ax25->idle = ax25_dev->values[AX25_VALUES_IDLE];
+ ax25->backoff = ax25_dev->values[AX25_VALUES_BACKOFF];
+
+ if (ax25_dev->values[AX25_VALUES_AXDEFMODE]) {
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = ax25_dev->values[AX25_VALUES_EWINDOW];
+ } else {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25_dev->values[AX25_VALUES_WINDOW];
+ }
+ } else {
+ ax25->rtt = AX25_DEF_T1 / 2;
+ ax25->t1 = AX25_DEF_T1;
+ ax25->t2 = AX25_DEF_T2;
+ ax25->t3 = AX25_DEF_T3;
+ ax25->n2 = AX25_DEF_N2;
+ ax25->paclen = AX25_DEF_PACLEN;
+ ax25->idle = AX25_DEF_IDLE;
+ ax25->backoff = AX25_DEF_BACKOFF;
+
+ if (AX25_DEF_AXDEFMODE) {
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = AX25_DEF_EWINDOW;
+ } else {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = AX25_DEF_WINDOW;
+ }
+ }
+}
+
+/*
+ * Create an empty AX.25 control block.
+ */
+ax25_cb *ax25_create_cb(void)
+{
+ ax25_cb *ax25;
+
+ if ((ax25 = kmalloc(sizeof(*ax25), GFP_ATOMIC)) == NULL)
+ return NULL;
+
+ memset(ax25, 0x00, sizeof(*ax25));
+ atomic_set(&ax25->refcount, 1);
+
+ skb_queue_head_init(&ax25->write_queue);
+ skb_queue_head_init(&ax25->frag_queue);
+ skb_queue_head_init(&ax25->ack_queue);
+ skb_queue_head_init(&ax25->reseq_queue);
+
+ init_timer(&ax25->timer);
+ init_timer(&ax25->t1timer);
+ init_timer(&ax25->t2timer);
+ init_timer(&ax25->t3timer);
+ init_timer(&ax25->idletimer);
+
+ ax25_fillin_cb(ax25, NULL);
+
+ ax25->state = AX25_STATE_0;
+
+ return ax25;
+}
+
+/*
+ * Handling for system calls applied via the various interfaces to an
+ * AX25 socket object
+ */
+
+static int ax25_setsockopt(struct socket *sock, int level, int optname,
+ char __user *optval, int optlen)
+{
+ struct sock *sk = sock->sk;
+ ax25_cb *ax25;
+ struct net_device *dev;
+ char devname[IFNAMSIZ];
+ int opt, res = 0;
+
+ if (level != SOL_AX25)
+ return -ENOPROTOOPT;
+
+ if (optlen < sizeof(int))
+ return -EINVAL;
+
+ if (get_user(opt, (int __user *)optval))
+ return -EFAULT;
+
+ lock_sock(sk);
+ ax25 = ax25_sk(sk);
+
+ switch (optname) {
+ case AX25_WINDOW:
+ if (ax25->modulus == AX25_MODULUS) {
+ if (opt < 1 || opt > 7) {
+ res = -EINVAL;
+ break;
+ }
+ } else {
+ if (opt < 1 || opt > 63) {
+ res = -EINVAL;
+ break;
+ }
+ }
+ ax25->window = opt;
+ break;
+
+ case AX25_T1:
+ if (opt < 1) {
+ res = -EINVAL;
+ break;
+ }
+ ax25->rtt = (opt * HZ) / 2;
+ ax25->t1 = opt * HZ;
+ break;
+
+ case AX25_T2:
+ if (opt < 1) {
+ res = -EINVAL;
+ break;
+ }
+ ax25->t2 = opt * HZ;
+ break;
+
+ case AX25_N2:
+ if (opt < 1 || opt > 31) {
+ res = -EINVAL;
+ break;
+ }
+ ax25->n2 = opt;
+ break;
+
+ case AX25_T3:
+ if (opt < 1) {
+ res = -EINVAL;
+ break;
+ }
+ ax25->t3 = opt * HZ;
+ break;
+
+ case AX25_IDLE:
+ if (opt < 0) {
+ res = -EINVAL;
+ break;
+ }
+ ax25->idle = opt * 60 * HZ;
+ break;
+
+ case AX25_BACKOFF:
+ if (opt < 0 || opt > 2) {
+ res = -EINVAL;
+ break;
+ }
+ ax25->backoff = opt;
+ break;
+
+ case AX25_EXTSEQ:
+ ax25->modulus = opt ? AX25_EMODULUS : AX25_MODULUS;
+ break;
+
+ case AX25_PIDINCL:
+ ax25->pidincl = opt ? 1 : 0;
+ break;
+
+ case AX25_IAMDIGI:
+ ax25->iamdigi = opt ? 1 : 0;
+ break;
+
+ case AX25_PACLEN:
+ if (opt < 16 || opt > 65535) {
+ res = -EINVAL;
+ break;
+ }
+ ax25->paclen = opt;
+ break;
+
+ case SO_BINDTODEVICE:
+ if (optlen > IFNAMSIZ)
+ optlen=IFNAMSIZ;
+ if (copy_from_user(devname, optval, optlen)) {
+ res = -EFAULT;
+ break;
+ }
+
+ dev = dev_get_by_name(devname);
+ if (dev == NULL) {
+ res = -ENODEV;
+ break;
+ }
+
+ if (sk->sk_type == SOCK_SEQPACKET &&
+ (sock->state != SS_UNCONNECTED ||
+ sk->sk_state == TCP_LISTEN)) {
+ res = -EADDRNOTAVAIL;
+ dev_put(dev);
+ break;
+ }
+
+ ax25->ax25_dev = ax25_dev_ax25dev(dev);
+ ax25_fillin_cb(ax25, ax25->ax25_dev);
+ break;
+
+ default:
+ res = -ENOPROTOOPT;
+ }
+ release_sock(sk);
+
+ return res;
+}
+
+static int ax25_getsockopt(struct socket *sock, int level, int optname,
+ char __user *optval, int __user *optlen)
+{
+ struct sock *sk = sock->sk;
+ ax25_cb *ax25;
+ struct ax25_dev *ax25_dev;
+ char devname[IFNAMSIZ];
+ void *valptr;
+ int val = 0;
+ int maxlen, length;
+
+ if (level != SOL_AX25)
+ return -ENOPROTOOPT;
+
+ if (get_user(maxlen, optlen))
+ return -EFAULT;
+
+ if (maxlen < 1)
+ return -EFAULT;
+
+ valptr = (void *) &val;
+ length = min_t(unsigned int, maxlen, sizeof(int));
+
+ lock_sock(sk);
+ ax25 = ax25_sk(sk);
+
+ switch (optname) {
+ case AX25_WINDOW:
+ val = ax25->window;
+ break;
+
+ case AX25_T1:
+ val = ax25->t1 / HZ;
+ break;
+
+ case AX25_T2:
+ val = ax25->t2 / HZ;
+ break;
+
+ case AX25_N2:
+ val = ax25->n2;
+ break;
+
+ case AX25_T3:
+ val = ax25->t3 / HZ;
+ break;
+
+ case AX25_IDLE:
+ val = ax25->idle / (60 * HZ);
+ break;
+
+ case AX25_BACKOFF:
+ val = ax25->backoff;
+ break;
+
+ case AX25_EXTSEQ:
+ val = (ax25->modulus == AX25_EMODULUS);
+ break;
+
+ case AX25_PIDINCL:
+ val = ax25->pidincl;
+ break;
+
+ case AX25_IAMDIGI:
+ val = ax25->iamdigi;
+ break;
+
+ case AX25_PACLEN:
+ val = ax25->paclen;
+ break;
+
+ case SO_BINDTODEVICE:
+ ax25_dev = ax25->ax25_dev;
+
+ if (ax25_dev != NULL && ax25_dev->dev != NULL) {
+ strlcpy(devname, ax25_dev->dev->name, sizeof(devname));
+ length = strlen(devname) + 1;
+ } else {
+ *devname = '\0';
+ length = 1;
+ }
+
+ valptr = (void *) devname;
+ break;
+
+ default:
+ release_sock(sk);
+ return -ENOPROTOOPT;
+ }
+ release_sock(sk);
+
+ if (put_user(length, optlen))
+ return -EFAULT;
+
+ return copy_to_user(optval, valptr, length) ? -EFAULT : 0;
+}
+
+static int ax25_listen(struct socket *sock, int backlog)
+{
+ struct sock *sk = sock->sk;
+ int res = 0;
+
+ lock_sock(sk);
+ if (sk->sk_type == SOCK_SEQPACKET && sk->sk_state != TCP_LISTEN) {
+ sk->sk_max_ack_backlog = backlog;
+ sk->sk_state = TCP_LISTEN;
+ goto out;
+ }
+ res = -EOPNOTSUPP;
+
+out:
+ release_sock(sk);
+
+ return res;
+}
+
+/*
+ * XXX: when creating ax25_sock we should update the .obj_size setting
+ * below.
+ */
+static struct proto ax25_proto = {
+ .name = "AX25",
+ .owner = THIS_MODULE,
+ .obj_size = sizeof(struct sock),
+};
+
+static int ax25_create(struct socket *sock, int protocol)
+{
+ struct sock *sk;
+ ax25_cb *ax25;
+
+ switch (sock->type) {
+ case SOCK_DGRAM:
+ if (protocol == 0 || protocol == PF_AX25)
+ protocol = AX25_P_TEXT;
+ break;
+
+ case SOCK_SEQPACKET:
+ switch (protocol) {
+ case 0:
+ case PF_AX25: /* For CLX */
+ protocol = AX25_P_TEXT;
+ break;
+ case AX25_P_SEGMENT:
+#ifdef CONFIG_INET
+ case AX25_P_ARP:
+ case AX25_P_IP:
+#endif
+#ifdef CONFIG_NETROM
+ case AX25_P_NETROM:
+#endif
+#ifdef CONFIG_ROSE
+ case AX25_P_ROSE:
+#endif
+ return -ESOCKTNOSUPPORT;
+#ifdef CONFIG_NETROM_MODULE
+ case AX25_P_NETROM:
+ if (ax25_protocol_is_registered(AX25_P_NETROM))
+ return -ESOCKTNOSUPPORT;
+#endif
+#ifdef CONFIG_ROSE_MODULE
+ case AX25_P_ROSE:
+ if (ax25_protocol_is_registered(AX25_P_ROSE))
+ return -ESOCKTNOSUPPORT;
+#endif
+ default:
+ break;
+ }
+ break;
+
+ case SOCK_RAW:
+ break;
+ default:
+ return -ESOCKTNOSUPPORT;
+ }
+
+ if ((sk = sk_alloc(PF_AX25, GFP_ATOMIC, &ax25_proto, 1)) == NULL)
+ return -ENOMEM;
+
+ ax25 = sk->sk_protinfo = ax25_create_cb();
+ if (!ax25) {
+ sk_free(sk);
+ return -ENOMEM;
+ }
+
+ sock_init_data(sock, sk);
+
+ sk->sk_destruct = ax25_free_sock;
+ sock->ops = &ax25_proto_ops;
+ sk->sk_protocol = protocol;
+
+ ax25->sk = sk;
+
+ return 0;
+}
+
+struct sock *ax25_make_new(struct sock *osk, struct ax25_dev *ax25_dev)
+{
+ struct sock *sk;
+ ax25_cb *ax25, *oax25;
+
+ if ((sk = sk_alloc(PF_AX25, GFP_ATOMIC, osk->sk_prot, 1)) == NULL)
+ return NULL;
+
+ if ((ax25 = ax25_create_cb()) == NULL) {
+ sk_free(sk);
+ return NULL;
+ }
+
+ switch (osk->sk_type) {
+ case SOCK_DGRAM:
+ break;
+ case SOCK_SEQPACKET:
+ break;
+ default:
+ sk_free(sk);
+ ax25_cb_put(ax25);
+ return NULL;
+ }
+
+ sock_init_data(NULL, sk);
+
+ sk->sk_destruct = ax25_free_sock;
+ sk->sk_type = osk->sk_type;
+ sk->sk_socket = osk->sk_socket;
+ sk->sk_priority = osk->sk_priority;
+ sk->sk_protocol = osk->sk_protocol;
+ sk->sk_rcvbuf = osk->sk_rcvbuf;
+ sk->sk_sndbuf = osk->sk_sndbuf;
+ sk->sk_state = TCP_ESTABLISHED;
+ sk->sk_sleep = osk->sk_sleep;
+
+ if (sock_flag(osk, SOCK_DBG))
+ sock_set_flag(sk, SOCK_DBG);
+
+ if (sock_flag(osk, SOCK_ZAPPED))
+ sock_set_flag(sk, SOCK_ZAPPED);
+
+ oax25 = ax25_sk(osk);
+
+ ax25->modulus = oax25->modulus;
+ ax25->backoff = oax25->backoff;
+ ax25->pidincl = oax25->pidincl;
+ ax25->iamdigi = oax25->iamdigi;
+ ax25->rtt = oax25->rtt;
+ ax25->t1 = oax25->t1;
+ ax25->t2 = oax25->t2;
+ ax25->t3 = oax25->t3;
+ ax25->n2 = oax25->n2;
+ ax25->idle = oax25->idle;
+ ax25->paclen = oax25->paclen;
+ ax25->window = oax25->window;
+
+ ax25->ax25_dev = ax25_dev;
+ ax25->source_addr = oax25->source_addr;
+
+ if (oax25->digipeat != NULL) {
+ if ((ax25->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
+ sk_free(sk);
+ ax25_cb_put(ax25);
+ return NULL;
+ }
+
+ memcpy(ax25->digipeat, oax25->digipeat, sizeof(ax25_digi));
+ }
+
+ sk->sk_protinfo = ax25;
+ ax25->sk = sk;
+
+ return sk;
+}
+
+static int ax25_release(struct socket *sock)
+{
+ struct sock *sk = sock->sk;
+ ax25_cb *ax25;
+
+ if (sk == NULL)
+ return 0;
+
+ sock_hold(sk);
+ sock_orphan(sk);
+ lock_sock(sk);
+ ax25 = ax25_sk(sk);
+
+ if (sk->sk_type == SOCK_SEQPACKET) {
+ switch (ax25->state) {
+ case AX25_STATE_0:
+ release_sock(sk);
+ ax25_disconnect(ax25, 0);
+ lock_sock(sk);
+ ax25_destroy_socket(ax25);
+ break;
+
+ case AX25_STATE_1:
+ case AX25_STATE_2:
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ release_sock(sk);
+ ax25_disconnect(ax25, 0);
+ lock_sock(sk);
+ ax25_destroy_socket(ax25);
+ break;
+
+ case AX25_STATE_3:
+ case AX25_STATE_4:
+ ax25_clear_queues(ax25);
+ ax25->n2count = 0;
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_send_control(ax25,
+ AX25_DISC,
+ AX25_POLLON,
+ AX25_COMMAND);
+ ax25_stop_t2timer(ax25);
+ ax25_stop_t3timer(ax25);
+ ax25_stop_idletimer(ax25);
+ break;
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ ax25_stop_t3timer(ax25);
+ ax25_stop_idletimer(ax25);
+ break;
+#endif
+ }
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+ ax25->state = AX25_STATE_2;
+ sk->sk_state = TCP_CLOSE;
+ sk->sk_shutdown |= SEND_SHUTDOWN;
+ sk->sk_state_change(sk);
+ sock_set_flag(sk, SOCK_DESTROY);
+ break;
+
+ default:
+ break;
+ }
+ } else {
+ sk->sk_state = TCP_CLOSE;
+ sk->sk_shutdown |= SEND_SHUTDOWN;
+ sk->sk_state_change(sk);
+ ax25_destroy_socket(ax25);
+ }
+
+ sock->sk = NULL;
+ release_sock(sk);
+ sock_put(sk);
+
+ return 0;
+}
+
+/*
+ * We support a funny extension here so you can (as root) give any callsign
+ * digipeated via a local address as source. This hack is obsolete now
+ * that we've implemented support for SO_BINDTODEVICE. It is however small
+ * and trivially backward compatible.
+ */
+static int ax25_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
+{
+ struct sock *sk = sock->sk;
+ struct full_sockaddr_ax25 *addr = (struct full_sockaddr_ax25 *)uaddr;
+ ax25_dev *ax25_dev = NULL;
+ ax25_address *call;
+ ax25_cb *ax25;
+ int err = 0;
+
+ if (addr_len != sizeof(struct sockaddr_ax25) &&
+ addr_len != sizeof(struct full_sockaddr_ax25)) {
+ /* support for old structure may go away some time */
+ if ((addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * 6) ||
+ (addr_len > sizeof(struct full_sockaddr_ax25))) {
+ return -EINVAL;
+ }
+
+ printk(KERN_WARNING "ax25_bind(): %s uses old (6 digipeater) socket structure.\n",
+ current->comm);
+ }
+
+ if (addr->fsa_ax25.sax25_family != AF_AX25)
+ return -EINVAL;
+
+ call = ax25_findbyuid(current->euid);
+ if (call == NULL && ax25_uid_policy && !capable(CAP_NET_ADMIN)) {
+ return -EACCES;
+ }
+
+ lock_sock(sk);
+
+ ax25 = ax25_sk(sk);
+ if (!sock_flag(sk, SOCK_ZAPPED)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (call == NULL)
+ ax25->source_addr = addr->fsa_ax25.sax25_call;
+ else
+ ax25->source_addr = *call;
+
+ /*
+ * User already set interface with SO_BINDTODEVICE
+ */
+ if (ax25->ax25_dev != NULL)
+ goto done;
+
+ if (addr_len > sizeof(struct sockaddr_ax25) && addr->fsa_ax25.sax25_ndigis == 1) {
+ if (ax25cmp(&addr->fsa_digipeater[0], &null_ax25_address) != 0 &&
+ (ax25_dev = ax25_addr_ax25dev(&addr->fsa_digipeater[0])) == NULL) {
+ err = -EADDRNOTAVAIL;
+ goto out;
+ }
+ } else {
+ if ((ax25_dev = ax25_addr_ax25dev(&addr->fsa_ax25.sax25_call)) == NULL) {
+ err = -EADDRNOTAVAIL;
+ goto out;
+ }
+ }
+
+ if (ax25_dev != NULL)
+ ax25_fillin_cb(ax25, ax25_dev);
+
+done:
+ ax25_cb_add(ax25);
+ sock_reset_flag(sk, SOCK_ZAPPED);
+
+out:
+ release_sock(sk);
+
+ return 0;
+}
+
+/*
+ * FIXME: nonblock behaviour looks like it may have a bug.
+ */
+static int ax25_connect(struct socket *sock, struct sockaddr *uaddr,
+ int addr_len, int flags)
+{
+ struct sock *sk = sock->sk;
+ ax25_cb *ax25 = ax25_sk(sk), *ax25t;
+ struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)uaddr;
+ ax25_digi *digi = NULL;
+ int ct = 0, err = 0;
+
+ /*
+ * some sanity checks. code further down depends on this
+ */
+
+ if (addr_len == sizeof(struct sockaddr_ax25)) {
+ /* support for this will go away in early 2.5.x */
+ printk(KERN_WARNING "ax25_connect(): %s uses obsolete socket structure\n",
+ current->comm);
+ }
+ else if (addr_len != sizeof(struct full_sockaddr_ax25)) {
+ /* support for old structure may go away some time */
+ if ((addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * 6) ||
+ (addr_len > sizeof(struct full_sockaddr_ax25))) {
+ return -EINVAL;
+ }
+
+ printk(KERN_WARNING "ax25_connect(): %s uses old (6 digipeater) socket structure.\n",
+ current->comm);
+ }
+
+ if (fsa->fsa_ax25.sax25_family != AF_AX25)
+ return -EINVAL;
+
+ lock_sock(sk);
+
+ /* deal with restarts */
+ if (sock->state == SS_CONNECTING) {
+ switch (sk->sk_state) {
+ case TCP_SYN_SENT: /* still trying */
+ err = -EINPROGRESS;
+ goto out;
+
+ case TCP_ESTABLISHED: /* connection established */
+ sock->state = SS_CONNECTED;
+ goto out;
+
+ case TCP_CLOSE: /* connection refused */
+ sock->state = SS_UNCONNECTED;
+ err = -ECONNREFUSED;
+ goto out;
+ }
+ }
+
+ if (sk->sk_state == TCP_ESTABLISHED && sk->sk_type == SOCK_SEQPACKET) {
+ err = -EISCONN; /* No reconnect on a seqpacket socket */
+ goto out;
+ }
+
+ sk->sk_state = TCP_CLOSE;
+ sock->state = SS_UNCONNECTED;
+
+ if (ax25->digipeat != NULL) {
+ kfree(ax25->digipeat);
+ ax25->digipeat = NULL;
+ }
+
+ /*
+ * Handle digi-peaters to be used.
+ */
+ if (addr_len > sizeof(struct sockaddr_ax25) &&
+ fsa->fsa_ax25.sax25_ndigis != 0) {
+ /* Valid number of digipeaters ? */
+ if (fsa->fsa_ax25.sax25_ndigis < 1 || fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if ((digi = kmalloc(sizeof(ax25_digi), GFP_KERNEL)) == NULL) {
+ err = -ENOBUFS;
+ goto out;
+ }
+
+ digi->ndigi = fsa->fsa_ax25.sax25_ndigis;
+ digi->lastrepeat = -1;
+
+ while (ct < fsa->fsa_ax25.sax25_ndigis) {
+ if ((fsa->fsa_digipeater[ct].ax25_call[6] &
+ AX25_HBIT) && ax25->iamdigi) {
+ digi->repeated[ct] = 1;
+ digi->lastrepeat = ct;
+ } else {
+ digi->repeated[ct] = 0;
+ }
+ digi->calls[ct] = fsa->fsa_digipeater[ct];
+ ct++;
+ }
+ }
+
+ /*
+ * Must bind first - autobinding in this may or may not work. If
+ * the socket is already bound, check to see if the device has
+ * been filled in, error if it hasn't.
+ */
+ if (sock_flag(sk, SOCK_ZAPPED)) {
+ /* check if we can remove this feature. It is broken. */
+ printk(KERN_WARNING "ax25_connect(): %s uses autobind, please contact jreuter@yaina.de\n",
+ current->comm);
+ if ((err = ax25_rt_autobind(ax25, &fsa->fsa_ax25.sax25_call)) < 0) {
+ kfree(digi);
+ goto out;
+ }
+
+ ax25_fillin_cb(ax25, ax25->ax25_dev);
+ ax25_cb_add(ax25);
+ } else {
+ if (ax25->ax25_dev == NULL) {
+ kfree(digi);
+ err = -EHOSTUNREACH;
+ goto out;
+ }
+ }
+
+ if (sk->sk_type == SOCK_SEQPACKET &&
+ (ax25t=ax25_find_cb(&ax25->source_addr, &fsa->fsa_ax25.sax25_call, digi,
+ ax25->ax25_dev->dev))) {
+ kfree(digi);
+ err = -EADDRINUSE; /* Already such a connection */
+ ax25_cb_put(ax25t);
+ goto out;
+ }
+
+ ax25->dest_addr = fsa->fsa_ax25.sax25_call;
+ ax25->digipeat = digi;
+
+ /* First the easy one */
+ if (sk->sk_type != SOCK_SEQPACKET) {
+ sock->state = SS_CONNECTED;
+ sk->sk_state = TCP_ESTABLISHED;
+ goto out;
+ }
+
+ /* Move to connecting socket, ax.25 lapb WAIT_UA.. */
+ sock->state = SS_CONNECTING;
+ sk->sk_state = TCP_SYN_SENT;
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_std_establish_data_link(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ if (ax25->ax25_dev->dama.slave)
+ ax25_ds_establish_data_link(ax25);
+ else
+ ax25_std_establish_data_link(ax25);
+ break;
+#endif
+ }
+
+ ax25->state = AX25_STATE_1;
+
+ ax25_start_heartbeat(ax25);
+
+ /* Now the loop */
+ if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK)) {
+ err = -EINPROGRESS;
+ goto out;
+ }
+
+ if (sk->sk_state == TCP_SYN_SENT) {
+ struct task_struct *tsk = current;
+ DECLARE_WAITQUEUE(wait, tsk);
+
+ add_wait_queue(sk->sk_sleep, &wait);
+ for (;;) {
+ if (sk->sk_state != TCP_SYN_SENT)
+ break;
+ set_current_state(TASK_INTERRUPTIBLE);
+ release_sock(sk);
+ if (!signal_pending(tsk)) {
+ schedule();
+ lock_sock(sk);
+ continue;
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(sk->sk_sleep, &wait);
+ return -ERESTARTSYS;
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(sk->sk_sleep, &wait);
+ }
+
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ /* Not in ABM, not in WAIT_UA -> failed */
+ sock->state = SS_UNCONNECTED;
+ err = sock_error(sk); /* Always set at this point */
+ goto out;
+ }
+
+ sock->state = SS_CONNECTED;
+
+ err=0;
+out:
+ release_sock(sk);
+
+ return err;
+}
+
+
+static int ax25_accept(struct socket *sock, struct socket *newsock, int flags)
+{
+ struct task_struct *tsk = current;
+ DECLARE_WAITQUEUE(wait, tsk);
+ struct sk_buff *skb;
+ struct sock *newsk;
+ struct sock *sk;
+ int err = 0;
+
+ if (sock->state != SS_UNCONNECTED)
+ return -EINVAL;
+
+ if ((sk = sock->sk) == NULL)
+ return -EINVAL;
+
+ lock_sock(sk);
+ if (sk->sk_type != SOCK_SEQPACKET) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (sk->sk_state != TCP_LISTEN) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * The read queue this time is holding sockets ready to use
+ * hooked into the SABM we saved
+ */
+ add_wait_queue(sk->sk_sleep, &wait);
+ for (;;) {
+ skb = skb_dequeue(&sk->sk_receive_queue);
+ if (skb)
+ break;
+
+ release_sock(sk);
+ current->state = TASK_INTERRUPTIBLE;
+ if (flags & O_NONBLOCK) {
+ current->state = TASK_RUNNING;
+ remove_wait_queue(sk->sk_sleep, &wait);
+ return -EWOULDBLOCK;
+ }
+ if (!signal_pending(tsk)) {
+ schedule();
+ lock_sock(sk);
+ continue;
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(sk->sk_sleep, &wait);
+ return -ERESTARTSYS;
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(sk->sk_sleep, &wait);
+
+ newsk = skb->sk;
+ newsk->sk_socket = newsock;
+ newsk->sk_sleep = &newsock->wait;
+
+ /* Now attach up the new socket */
+ kfree_skb(skb);
+ sk->sk_ack_backlog--;
+ newsock->sk = newsk;
+ newsock->state = SS_CONNECTED;
+
+out:
+ release_sock(sk);
+
+ return err;
+}
+
+static int ax25_getname(struct socket *sock, struct sockaddr *uaddr,
+ int *uaddr_len, int peer)
+{
+ struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)uaddr;
+ struct sock *sk = sock->sk;
+ unsigned char ndigi, i;
+ ax25_cb *ax25;
+ int err = 0;
+
+ lock_sock(sk);
+ ax25 = ax25_sk(sk);
+
+ if (peer != 0) {
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ err = -ENOTCONN;
+ goto out;
+ }
+
+ fsa->fsa_ax25.sax25_family = AF_AX25;
+ fsa->fsa_ax25.sax25_call = ax25->dest_addr;
+ fsa->fsa_ax25.sax25_ndigis = 0;
+
+ if (ax25->digipeat != NULL) {
+ ndigi = ax25->digipeat->ndigi;
+ fsa->fsa_ax25.sax25_ndigis = ndigi;
+ for (i = 0; i < ndigi; i++)
+ fsa->fsa_digipeater[i] =
+ ax25->digipeat->calls[i];
+ }
+ } else {
+ fsa->fsa_ax25.sax25_family = AF_AX25;
+ fsa->fsa_ax25.sax25_call = ax25->source_addr;
+ fsa->fsa_ax25.sax25_ndigis = 1;
+ if (ax25->ax25_dev != NULL) {
+ memcpy(&fsa->fsa_digipeater[0],
+ ax25->ax25_dev->dev->dev_addr, AX25_ADDR_LEN);
+ } else {
+ fsa->fsa_digipeater[0] = null_ax25_address;
+ }
+ }
+ *uaddr_len = sizeof (struct full_sockaddr_ax25);
+
+out:
+ release_sock(sk);
+
+ return err;
+}
+
+static int ax25_sendmsg(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t len)
+{
+ struct sockaddr_ax25 *usax = (struct sockaddr_ax25 *)msg->msg_name;
+ struct sock *sk = sock->sk;
+ struct sockaddr_ax25 sax;
+ struct sk_buff *skb;
+ ax25_digi dtmp, *dp;
+ unsigned char *asmptr;
+ ax25_cb *ax25;
+ size_t size;
+ int lv, err, addr_len = msg->msg_namelen;
+
+ if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT))
+ return -EINVAL;
+
+ lock_sock(sk);
+ ax25 = ax25_sk(sk);
+
+ if (sock_flag(sk, SOCK_ZAPPED)) {
+ err = -EADDRNOTAVAIL;
+ goto out;
+ }
+
+ if (sk->sk_shutdown & SEND_SHUTDOWN) {
+ send_sig(SIGPIPE, current, 0);
+ err = -EPIPE;
+ goto out;
+ }
+
+ if (ax25->ax25_dev == NULL) {
+ err = -ENETUNREACH;
+ goto out;
+ }
+
+ if (len > ax25->ax25_dev->dev->mtu) {
+ err = -EMSGSIZE;
+ goto out;
+ }
+
+ if (usax != NULL) {
+ if (usax->sax25_family != AF_AX25) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (addr_len == sizeof(struct sockaddr_ax25)) {
+ printk(KERN_WARNING "ax25_sendmsg(): %s uses obsolete socket structure\n",
+ current->comm);
+ }
+ else if (addr_len != sizeof(struct full_sockaddr_ax25)) {
+ /* support for old structure may go away some time */
+ if ((addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * 6) ||
+ (addr_len > sizeof(struct full_sockaddr_ax25))) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ printk(KERN_WARNING "ax25_sendmsg(): %s uses old (6 digipeater) socket structure.\n",
+ current->comm);
+ }
+
+ if (addr_len > sizeof(struct sockaddr_ax25) && usax->sax25_ndigis != 0) {
+ int ct = 0;
+ struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax;
+
+ /* Valid number of digipeaters ? */
+ if (usax->sax25_ndigis < 1 || usax->sax25_ndigis > AX25_MAX_DIGIS) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ dtmp.ndigi = usax->sax25_ndigis;
+
+ while (ct < usax->sax25_ndigis) {
+ dtmp.repeated[ct] = 0;
+ dtmp.calls[ct] = fsa->fsa_digipeater[ct];
+ ct++;
+ }
+
+ dtmp.lastrepeat = 0;
+ }
+
+ sax = *usax;
+ if (sk->sk_type == SOCK_SEQPACKET &&
+ ax25cmp(&ax25->dest_addr, &sax.sax25_call)) {
+ err = -EISCONN;
+ goto out;
+ }
+ if (usax->sax25_ndigis == 0)
+ dp = NULL;
+ else
+ dp = &dtmp;
+ } else {
+ /*
+ * FIXME: 1003.1g - if the socket is like this because
+ * it has become closed (not started closed) and is VC
+ * we ought to SIGPIPE, EPIPE
+ */
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ err = -ENOTCONN;
+ goto out;
+ }
+ sax.sax25_family = AF_AX25;
+ sax.sax25_call = ax25->dest_addr;
+ dp = ax25->digipeat;
+ }
+
+ SOCK_DEBUG(sk, "AX.25: sendto: Addresses built.\n");
+
+ /* Build a packet */
+ SOCK_DEBUG(sk, "AX.25: sendto: building packet.\n");
+
+ /* Assume the worst case */
+ size = len + ax25->ax25_dev->dev->hard_header_len;
+
+ skb = sock_alloc_send_skb(sk, size, msg->msg_flags&MSG_DONTWAIT, &err);
+ if (skb == NULL)
+ goto out;
+
+ skb_reserve(skb, size - len);
+
+ SOCK_DEBUG(sk, "AX.25: Appending user data\n");
+
+ /* User data follows immediately after the AX.25 data */
+ if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
+ err = -EFAULT;
+ kfree_skb(skb);
+ goto out;
+ }
+
+ skb->nh.raw = skb->data;
+
+ /* Add the PID if one is not supplied by the user in the skb */
+ if (!ax25->pidincl) {
+ asmptr = skb_push(skb, 1);
+ *asmptr = sk->sk_protocol;
+ }
+
+ SOCK_DEBUG(sk, "AX.25: Transmitting buffer\n");
+
+ if (sk->sk_type == SOCK_SEQPACKET) {
+ /* Connected mode sockets go via the LAPB machine */
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ kfree_skb(skb);
+ err = -ENOTCONN;
+ goto out;
+ }
+
+ /* Shove it onto the queue and kick */
+ ax25_output(ax25, ax25->paclen, skb);
+
+ err = len;
+ goto out;
+ }
+
+ asmptr = skb_push(skb, 1 + ax25_addr_size(dp));
+
+ SOCK_DEBUG(sk, "Building AX.25 Header (dp=%p).\n", dp);
+
+ if (dp != NULL)
+ SOCK_DEBUG(sk, "Num digipeaters=%d\n", dp->ndigi);
+
+ /* Build an AX.25 header */
+ asmptr += (lv = ax25_addr_build(asmptr, &ax25->source_addr,
+ &sax.sax25_call, dp,
+ AX25_COMMAND, AX25_MODULUS));
+
+ SOCK_DEBUG(sk, "Built header (%d bytes)\n",lv);
+
+ skb->h.raw = asmptr;
+
+ SOCK_DEBUG(sk, "base=%p pos=%p\n", skb->data, asmptr);
+
+ *asmptr = AX25_UI;
+
+ /* Datagram frames go straight out of the door as UI */
+ skb->dev = ax25->ax25_dev->dev;
+
+ ax25_queue_xmit(skb);
+
+ err = len;
+
+out:
+ release_sock(sk);
+
+ return err;
+}
+
+static int ax25_recvmsg(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t size, int flags)
+{
+ struct sock *sk = sock->sk;
+ struct sk_buff *skb;
+ int copied;
+ int err = 0;
+
+ lock_sock(sk);
+ /*
+ * This works for seqpacket too. The receiver has ordered the
+ * queue for us! We do one quick check first though
+ */
+ if (sk->sk_type == SOCK_SEQPACKET && sk->sk_state != TCP_ESTABLISHED) {
+ err = -ENOTCONN;
+ goto out;
+ }
+
+ /* Now we can treat all alike */
+ skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
+ flags & MSG_DONTWAIT, &err);
+ if (skb == NULL)
+ goto out;
+
+ if (!ax25_sk(sk)->pidincl)
+ skb_pull(skb, 1); /* Remove PID */
+
+ skb->h.raw = skb->data;
+ copied = skb->len;
+
+ if (copied > size) {
+ copied = size;
+ msg->msg_flags |= MSG_TRUNC;
+ }
+
+ skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+
+ if (msg->msg_namelen != 0) {
+ struct sockaddr_ax25 *sax = (struct sockaddr_ax25 *)msg->msg_name;
+ ax25_digi digi;
+ ax25_address src;
+
+ ax25_addr_parse(skb->mac.raw+1, skb->data-skb->mac.raw-1, &src, NULL, &digi, NULL, NULL);
+
+ sax->sax25_family = AF_AX25;
+ /* We set this correctly, even though we may not let the
+ application know the digi calls further down (because it
+ did NOT ask to know them). This could get political... **/
+ sax->sax25_ndigis = digi.ndigi;
+ sax->sax25_call = src;
+
+ if (sax->sax25_ndigis != 0) {
+ int ct;
+ struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)sax;
+
+ for (ct = 0; ct < digi.ndigi; ct++)
+ fsa->fsa_digipeater[ct] = digi.calls[ct];
+ }
+ msg->msg_namelen = sizeof(struct full_sockaddr_ax25);
+ }
+
+ skb_free_datagram(sk, skb);
+ err = copied;
+
+out:
+ release_sock(sk);
+
+ return err;
+}
+
+static int ax25_shutdown(struct socket *sk, int how)
+{
+ /* FIXME - generate DM and RNR states */
+ return -EOPNOTSUPP;
+}
+
+static int ax25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+ struct sock *sk = sock->sk;
+ void __user *argp = (void __user *)arg;
+ int res = 0;
+
+ lock_sock(sk);
+ switch (cmd) {
+ case TIOCOUTQ: {
+ long amount;
+ amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+ if (amount < 0)
+ amount = 0;
+ res = put_user(amount, (int __user *)argp);
+ break;
+ }
+
+ case TIOCINQ: {
+ struct sk_buff *skb;
+ long amount = 0L;
+ /* These two are safe on a single CPU system as only user tasks fiddle here */
+ if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
+ amount = skb->len;
+ res = put_user(amount, (int __user *)argp);
+ break;
+ }
+
+ case SIOCGSTAMP:
+ if (sk != NULL) {
+ res = sock_get_timestamp(sk, argp);
+ break;
+ }
+ res = -EINVAL;
+ break;
+
+ case SIOCAX25ADDUID: /* Add a uid to the uid/call map table */
+ case SIOCAX25DELUID: /* Delete a uid from the uid/call map table */
+ case SIOCAX25GETUID: {
+ struct sockaddr_ax25 sax25;
+ if (copy_from_user(&sax25, argp, sizeof(sax25))) {
+ res = -EFAULT;
+ break;
+ }
+ res = ax25_uid_ioctl(cmd, &sax25);
+ break;
+ }
+
+ case SIOCAX25NOUID: { /* Set the default policy (default/bar) */
+ long amount;
+ if (!capable(CAP_NET_ADMIN)) {
+ res = -EPERM;
+ break;
+ }
+ if (get_user(amount, (long __user *)argp)) {
+ res = -EFAULT;
+ break;
+ }
+ if (amount > AX25_NOUID_BLOCK) {
+ res = -EINVAL;
+ break;
+ }
+ ax25_uid_policy = amount;
+ res = 0;
+ break;
+ }
+
+ case SIOCADDRT:
+ case SIOCDELRT:
+ case SIOCAX25OPTRT:
+ if (!capable(CAP_NET_ADMIN)) {
+ res = -EPERM;
+ break;
+ }
+ res = ax25_rt_ioctl(cmd, argp);
+ break;
+
+ case SIOCAX25CTLCON:
+ if (!capable(CAP_NET_ADMIN)) {
+ res = -EPERM;
+ break;
+ }
+ res = ax25_ctl_ioctl(cmd, argp);
+ break;
+
+ case SIOCAX25GETINFO:
+ case SIOCAX25GETINFOOLD: {
+ ax25_cb *ax25 = ax25_sk(sk);
+ struct ax25_info_struct ax25_info;
+
+ ax25_info.t1 = ax25->t1 / HZ;
+ ax25_info.t2 = ax25->t2 / HZ;
+ ax25_info.t3 = ax25->t3 / HZ;
+ ax25_info.idle = ax25->idle / (60 * HZ);
+ ax25_info.n2 = ax25->n2;
+ ax25_info.t1timer = ax25_display_timer(&ax25->t1timer) / HZ;
+ ax25_info.t2timer = ax25_display_timer(&ax25->t2timer) / HZ;
+ ax25_info.t3timer = ax25_display_timer(&ax25->t3timer) / HZ;
+ ax25_info.idletimer = ax25_display_timer(&ax25->idletimer) / (60 * HZ);
+ ax25_info.n2count = ax25->n2count;
+ ax25_info.state = ax25->state;
+ ax25_info.rcv_q = atomic_read(&sk->sk_rmem_alloc);
+ ax25_info.snd_q = atomic_read(&sk->sk_wmem_alloc);
+ ax25_info.vs = ax25->vs;
+ ax25_info.vr = ax25->vr;
+ ax25_info.va = ax25->va;
+ ax25_info.vs_max = ax25->vs; /* reserved */
+ ax25_info.paclen = ax25->paclen;
+ ax25_info.window = ax25->window;
+
+ /* old structure? */
+ if (cmd == SIOCAX25GETINFOOLD) {
+ static int warned = 0;
+ if (!warned) {
+ printk(KERN_INFO "%s uses old SIOCAX25GETINFO\n",
+ current->comm);
+ warned=1;
+ }
+
+ if (copy_to_user(argp, &ax25_info, sizeof(struct ax25_info_struct_deprecated))) {
+ res = -EFAULT;
+ break;
+ }
+ } else {
+ if (copy_to_user(argp, &ax25_info, sizeof(struct ax25_info_struct))) {
+ res = -EINVAL;
+ break;
+ }
+ }
+ res = 0;
+ break;
+ }
+
+ case SIOCAX25ADDFWD:
+ case SIOCAX25DELFWD: {
+ struct ax25_fwd_struct ax25_fwd;
+ if (!capable(CAP_NET_ADMIN)) {
+ res = -EPERM;
+ break;
+ }
+ if (copy_from_user(&ax25_fwd, argp, sizeof(ax25_fwd))) {
+ res = -EFAULT;
+ break;
+ }
+ res = ax25_fwd_ioctl(cmd, &ax25_fwd);
+ break;
+ }
+
+ case SIOCGIFADDR:
+ case SIOCSIFADDR:
+ case SIOCGIFDSTADDR:
+ case SIOCSIFDSTADDR:
+ case SIOCGIFBRDADDR:
+ case SIOCSIFBRDADDR:
+ case SIOCGIFNETMASK:
+ case SIOCSIFNETMASK:
+ case SIOCGIFMETRIC:
+ case SIOCSIFMETRIC:
+ res = -EINVAL;
+ break;
+
+ default:
+ res = dev_ioctl(cmd, argp);
+ break;
+ }
+ release_sock(sk);
+
+ return res;
+}
+
+#ifdef CONFIG_PROC_FS
+
+static void *ax25_info_start(struct seq_file *seq, loff_t *pos)
+{
+ struct ax25_cb *ax25;
+ struct hlist_node *node;
+ int i = 0;
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(ax25, node, &ax25_list) {
+ if (i == *pos)
+ return ax25;
+ ++i;
+ }
+ return NULL;
+}
+
+static void *ax25_info_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+
+ return hlist_entry( ((struct ax25_cb *)v)->ax25_node.next,
+ struct ax25_cb, ax25_node);
+}
+
+static void ax25_info_stop(struct seq_file *seq, void *v)
+{
+ spin_unlock_bh(&ax25_list_lock);
+}
+
+static int ax25_info_show(struct seq_file *seq, void *v)
+{
+ ax25_cb *ax25 = v;
+ int k;
+
+
+ /*
+ * New format:
+ * magic dev src_addr dest_addr,digi1,digi2,.. st vs vr va t1 t1 t2 t2 t3 t3 idle idle n2 n2 rtt window paclen Snd-Q Rcv-Q inode
+ */
+
+ seq_printf(seq, "%8.8lx %s %s%s ",
+ (long) ax25,
+ ax25->ax25_dev == NULL? "???" : ax25->ax25_dev->dev->name,
+ ax2asc(&ax25->source_addr),
+ ax25->iamdigi? "*":"");
+ seq_printf(seq, "%s", ax2asc(&ax25->dest_addr));
+
+ for (k=0; (ax25->digipeat != NULL) && (k < ax25->digipeat->ndigi); k++) {
+ seq_printf(seq, ",%s%s",
+ ax2asc(&ax25->digipeat->calls[k]),
+ ax25->digipeat->repeated[k]? "*":"");
+ }
+
+ seq_printf(seq, " %d %d %d %d %lu %lu %lu %lu %lu %lu %lu %lu %d %d %lu %d %d",
+ ax25->state,
+ ax25->vs, ax25->vr, ax25->va,
+ ax25_display_timer(&ax25->t1timer) / HZ, ax25->t1 / HZ,
+ ax25_display_timer(&ax25->t2timer) / HZ, ax25->t2 / HZ,
+ ax25_display_timer(&ax25->t3timer) / HZ, ax25->t3 / HZ,
+ ax25_display_timer(&ax25->idletimer) / (60 * HZ),
+ ax25->idle / (60 * HZ),
+ ax25->n2count, ax25->n2,
+ ax25->rtt / HZ,
+ ax25->window,
+ ax25->paclen);
+
+ if (ax25->sk != NULL) {
+ bh_lock_sock(ax25->sk);
+ seq_printf(seq," %d %d %ld\n",
+ atomic_read(&ax25->sk->sk_wmem_alloc),
+ atomic_read(&ax25->sk->sk_rmem_alloc),
+ ax25->sk->sk_socket != NULL ? SOCK_INODE(ax25->sk->sk_socket)->i_ino : 0L);
+ bh_unlock_sock(ax25->sk);
+ } else {
+ seq_puts(seq, " * * *\n");
+ }
+ return 0;
+}
+
+static struct seq_operations ax25_info_seqops = {
+ .start = ax25_info_start,
+ .next = ax25_info_next,
+ .stop = ax25_info_stop,
+ .show = ax25_info_show,
+};
+
+static int ax25_info_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &ax25_info_seqops);
+}
+
+static struct file_operations ax25_info_fops = {
+ .owner = THIS_MODULE,
+ .open = ax25_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+#endif
+
+static struct net_proto_family ax25_family_ops = {
+ .family = PF_AX25,
+ .create = ax25_create,
+ .owner = THIS_MODULE,
+};
+
+static struct proto_ops ax25_proto_ops = {
+ .family = PF_AX25,
+ .owner = THIS_MODULE,
+ .release = ax25_release,
+ .bind = ax25_bind,
+ .connect = ax25_connect,
+ .socketpair = sock_no_socketpair,
+ .accept = ax25_accept,
+ .getname = ax25_getname,
+ .poll = datagram_poll,
+ .ioctl = ax25_ioctl,
+ .listen = ax25_listen,
+ .shutdown = ax25_shutdown,
+ .setsockopt = ax25_setsockopt,
+ .getsockopt = ax25_getsockopt,
+ .sendmsg = ax25_sendmsg,
+ .recvmsg = ax25_recvmsg,
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage,
+};
+
+/*
+ * Called by socket.c on kernel start up
+ */
+static struct packet_type ax25_packet_type = {
+ .type = __constant_htons(ETH_P_AX25),
+ .dev = NULL, /* All devices */
+ .func = ax25_kiss_rcv,
+};
+
+static struct notifier_block ax25_dev_notifier = {
+ .notifier_call =ax25_device_event,
+};
+
+EXPORT_SYMBOL(ax25_encapsulate);
+EXPORT_SYMBOL(ax25_rebuild_header);
+EXPORT_SYMBOL(ax25_findbyuid);
+EXPORT_SYMBOL(ax25_find_cb);
+EXPORT_SYMBOL(ax25_linkfail_register);
+EXPORT_SYMBOL(ax25_linkfail_release);
+EXPORT_SYMBOL(ax25_listen_register);
+EXPORT_SYMBOL(ax25_listen_release);
+EXPORT_SYMBOL(ax25_protocol_register);
+EXPORT_SYMBOL(ax25_protocol_release);
+EXPORT_SYMBOL(ax25_send_frame);
+EXPORT_SYMBOL(ax25_uid_policy);
+EXPORT_SYMBOL(ax25cmp);
+EXPORT_SYMBOL(ax2asc);
+EXPORT_SYMBOL(asc2ax);
+EXPORT_SYMBOL(null_ax25_address);
+EXPORT_SYMBOL(ax25_display_timer);
+
+static int __init ax25_init(void)
+{
+ int rc = proto_register(&ax25_proto, 0);
+
+ if (rc != 0)
+ goto out;
+
+ sock_register(&ax25_family_ops);
+ dev_add_pack(&ax25_packet_type);
+ register_netdevice_notifier(&ax25_dev_notifier);
+ ax25_register_sysctl();
+
+ proc_net_fops_create("ax25_route", S_IRUGO, &ax25_route_fops);
+ proc_net_fops_create("ax25", S_IRUGO, &ax25_info_fops);
+ proc_net_fops_create("ax25_calls", S_IRUGO, &ax25_uid_fops);
+out:
+ return rc;
+}
+module_init(ax25_init);
+
+
+MODULE_AUTHOR("Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk>");
+MODULE_DESCRIPTION("The amateur radio AX.25 link layer protocol");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_NETPROTO(PF_AX25);
+
+static void __exit ax25_exit(void)
+{
+ proc_net_remove("ax25_route");
+ proc_net_remove("ax25");
+ proc_net_remove("ax25_calls");
+ ax25_rt_free();
+ ax25_uid_free();
+ ax25_dev_free();
+
+ ax25_unregister_sysctl();
+ unregister_netdevice_notifier(&ax25_dev_notifier);
+
+ dev_remove_pack(&ax25_packet_type);
+
+ sock_unregister(PF_AX25);
+ proto_unregister(&ax25_proto);
+}
+module_exit(ax25_exit);
diff --git a/net/ax25/ax25_addr.c b/net/ax25/ax25_addr.c
new file mode 100644
index 0000000..f4fa6df
--- /dev/null
+++ b/net/ax25/ax25_addr.c
@@ -0,0 +1,290 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+/*
+ * The null address is defined as a callsign of all spaces with an
+ * SSID of zero.
+ */
+ax25_address null_ax25_address = {{0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00}};
+
+/*
+ * ax25 -> ascii conversion
+ */
+char *ax2asc(ax25_address *a)
+{
+ static char buf[11];
+ char c, *s;
+ int n;
+
+ for (n = 0, s = buf; n < 6; n++) {
+ c = (a->ax25_call[n] >> 1) & 0x7F;
+
+ if (c != ' ') *s++ = c;
+ }
+
+ *s++ = '-';
+
+ if ((n = ((a->ax25_call[6] >> 1) & 0x0F)) > 9) {
+ *s++ = '1';
+ n -= 10;
+ }
+
+ *s++ = n + '0';
+ *s++ = '\0';
+
+ if (*buf == '\0' || *buf == '-')
+ return "*";
+
+ return buf;
+
+}
+
+/*
+ * ascii -> ax25 conversion
+ */
+ax25_address *asc2ax(char *callsign)
+{
+ static ax25_address addr;
+ char *s;
+ int n;
+
+ for (s = callsign, n = 0; n < 6; n++) {
+ if (*s != '\0' && *s != '-')
+ addr.ax25_call[n] = *s++;
+ else
+ addr.ax25_call[n] = ' ';
+ addr.ax25_call[n] <<= 1;
+ addr.ax25_call[n] &= 0xFE;
+ }
+
+ if (*s++ == '\0') {
+ addr.ax25_call[6] = 0x00;
+ return &addr;
+ }
+
+ addr.ax25_call[6] = *s++ - '0';
+
+ if (*s != '\0') {
+ addr.ax25_call[6] *= 10;
+ addr.ax25_call[6] += *s++ - '0';
+ }
+
+ addr.ax25_call[6] <<= 1;
+ addr.ax25_call[6] &= 0x1E;
+
+ return &addr;
+}
+
+/*
+ * Compare two ax.25 addresses
+ */
+int ax25cmp(ax25_address *a, ax25_address *b)
+{
+ int ct = 0;
+
+ while (ct < 6) {
+ if ((a->ax25_call[ct] & 0xFE) != (b->ax25_call[ct] & 0xFE)) /* Clean off repeater bits */
+ return 1;
+ ct++;
+ }
+
+ if ((a->ax25_call[ct] & 0x1E) == (b->ax25_call[ct] & 0x1E)) /* SSID without control bit */
+ return 0;
+
+ return 2; /* Partial match */
+}
+
+/*
+ * Compare two AX.25 digipeater paths.
+ */
+int ax25digicmp(ax25_digi *digi1, ax25_digi *digi2)
+{
+ int i;
+
+ if (digi1->ndigi != digi2->ndigi)
+ return 1;
+
+ if (digi1->lastrepeat != digi2->lastrepeat)
+ return 1;
+
+ for (i = 0; i < digi1->ndigi; i++)
+ if (ax25cmp(&digi1->calls[i], &digi2->calls[i]) != 0)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * Given an AX.25 address pull of to, from, digi list, command/response and the start of data
+ *
+ */
+unsigned char *ax25_addr_parse(unsigned char *buf, int len, ax25_address *src, ax25_address *dest, ax25_digi *digi, int *flags, int *dama)
+{
+ int d = 0;
+
+ if (len < 14) return NULL;
+
+ if (flags != NULL) {
+ *flags = 0;
+
+ if (buf[6] & AX25_CBIT)
+ *flags = AX25_COMMAND;
+ if (buf[13] & AX25_CBIT)
+ *flags = AX25_RESPONSE;
+ }
+
+ if (dama != NULL)
+ *dama = ~buf[13] & AX25_DAMA_FLAG;
+
+ /* Copy to, from */
+ if (dest != NULL)
+ memcpy(dest, buf + 0, AX25_ADDR_LEN);
+ if (src != NULL)
+ memcpy(src, buf + 7, AX25_ADDR_LEN);
+
+ buf += 2 * AX25_ADDR_LEN;
+ len -= 2 * AX25_ADDR_LEN;
+
+ digi->lastrepeat = -1;
+ digi->ndigi = 0;
+
+ while (!(buf[-1] & AX25_EBIT)) {
+ if (d >= AX25_MAX_DIGIS) return NULL; /* Max of 6 digis */
+ if (len < 7) return NULL; /* Short packet */
+
+ memcpy(&digi->calls[d], buf, AX25_ADDR_LEN);
+ digi->ndigi = d + 1;
+
+ if (buf[6] & AX25_HBIT) {
+ digi->repeated[d] = 1;
+ digi->lastrepeat = d;
+ } else {
+ digi->repeated[d] = 0;
+ }
+
+ buf += AX25_ADDR_LEN;
+ len -= AX25_ADDR_LEN;
+ d++;
+ }
+
+ return buf;
+}
+
+/*
+ * Assemble an AX.25 header from the bits
+ */
+int ax25_addr_build(unsigned char *buf, ax25_address *src, ax25_address *dest, ax25_digi *d, int flag, int modulus)
+{
+ int len = 0;
+ int ct = 0;
+
+ memcpy(buf, dest, AX25_ADDR_LEN);
+ buf[6] &= ~(AX25_EBIT | AX25_CBIT);
+ buf[6] |= AX25_SSSID_SPARE;
+
+ if (flag == AX25_COMMAND) buf[6] |= AX25_CBIT;
+
+ buf += AX25_ADDR_LEN;
+ len += AX25_ADDR_LEN;
+
+ memcpy(buf, src, AX25_ADDR_LEN);
+ buf[6] &= ~(AX25_EBIT | AX25_CBIT);
+ buf[6] &= ~AX25_SSSID_SPARE;
+
+ if (modulus == AX25_MODULUS)
+ buf[6] |= AX25_SSSID_SPARE;
+ else
+ buf[6] |= AX25_ESSID_SPARE;
+
+ if (flag == AX25_RESPONSE) buf[6] |= AX25_CBIT;
+
+ /*
+ * Fast path the normal digiless path
+ */
+ if (d == NULL || d->ndigi == 0) {
+ buf[6] |= AX25_EBIT;
+ return 2 * AX25_ADDR_LEN;
+ }
+
+ buf += AX25_ADDR_LEN;
+ len += AX25_ADDR_LEN;
+
+ while (ct < d->ndigi) {
+ memcpy(buf, &d->calls[ct], AX25_ADDR_LEN);
+
+ if (d->repeated[ct])
+ buf[6] |= AX25_HBIT;
+ else
+ buf[6] &= ~AX25_HBIT;
+
+ buf[6] &= ~AX25_EBIT;
+ buf[6] |= AX25_SSSID_SPARE;
+
+ buf += AX25_ADDR_LEN;
+ len += AX25_ADDR_LEN;
+ ct++;
+ }
+
+ buf[-1] |= AX25_EBIT;
+
+ return len;
+}
+
+int ax25_addr_size(ax25_digi *dp)
+{
+ if (dp == NULL)
+ return 2 * AX25_ADDR_LEN;
+
+ return AX25_ADDR_LEN * (2 + dp->ndigi);
+}
+
+/*
+ * Reverse Digipeat List. May not pass both parameters as same struct
+ */
+void ax25_digi_invert(ax25_digi *in, ax25_digi *out)
+{
+ int ct;
+
+ out->ndigi = in->ndigi;
+ out->lastrepeat = in->ndigi - in->lastrepeat - 2;
+
+ /* Invert the digipeaters */
+ for (ct = 0; ct < in->ndigi; ct++) {
+ out->calls[ct] = in->calls[in->ndigi - ct - 1];
+
+ if (ct <= out->lastrepeat) {
+ out->calls[ct].ax25_call[6] |= AX25_HBIT;
+ out->repeated[ct] = 1;
+ } else {
+ out->calls[ct].ax25_call[6] &= ~AX25_HBIT;
+ out->repeated[ct] = 0;
+ }
+ }
+}
+
diff --git a/net/ax25/ax25_dev.c b/net/ax25/ax25_dev.c
new file mode 100644
index 0000000..dab77ef
--- /dev/null
+++ b/net/ax25/ax25_dev.c
@@ -0,0 +1,208 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <linux/spinlock.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+ax25_dev *ax25_dev_list;
+DEFINE_SPINLOCK(ax25_dev_lock);
+
+ax25_dev *ax25_addr_ax25dev(ax25_address *addr)
+{
+ ax25_dev *ax25_dev, *res = NULL;
+
+ spin_lock_bh(&ax25_dev_lock);
+ for (ax25_dev = ax25_dev_list; ax25_dev != NULL; ax25_dev = ax25_dev->next)
+ if (ax25cmp(addr, (ax25_address *)ax25_dev->dev->dev_addr) == 0) {
+ res = ax25_dev;
+ }
+ spin_unlock_bh(&ax25_dev_lock);
+
+ return res;
+}
+
+/*
+ * This is called when an interface is brought up. These are
+ * reasonable defaults.
+ */
+void ax25_dev_device_up(struct net_device *dev)
+{
+ ax25_dev *ax25_dev;
+
+ if ((ax25_dev = kmalloc(sizeof(*ax25_dev), GFP_ATOMIC)) == NULL) {
+ printk(KERN_ERR "AX.25: ax25_dev_device_up - out of memory\n");
+ return;
+ }
+
+ ax25_unregister_sysctl();
+
+ memset(ax25_dev, 0x00, sizeof(*ax25_dev));
+
+ dev->ax25_ptr = ax25_dev;
+ ax25_dev->dev = dev;
+ dev_hold(dev);
+ ax25_dev->forward = NULL;
+
+ ax25_dev->values[AX25_VALUES_IPDEFMODE] = AX25_DEF_IPDEFMODE;
+ ax25_dev->values[AX25_VALUES_AXDEFMODE] = AX25_DEF_AXDEFMODE;
+ ax25_dev->values[AX25_VALUES_BACKOFF] = AX25_DEF_BACKOFF;
+ ax25_dev->values[AX25_VALUES_CONMODE] = AX25_DEF_CONMODE;
+ ax25_dev->values[AX25_VALUES_WINDOW] = AX25_DEF_WINDOW;
+ ax25_dev->values[AX25_VALUES_EWINDOW] = AX25_DEF_EWINDOW;
+ ax25_dev->values[AX25_VALUES_T1] = AX25_DEF_T1;
+ ax25_dev->values[AX25_VALUES_T2] = AX25_DEF_T2;
+ ax25_dev->values[AX25_VALUES_T3] = AX25_DEF_T3;
+ ax25_dev->values[AX25_VALUES_IDLE] = AX25_DEF_IDLE;
+ ax25_dev->values[AX25_VALUES_N2] = AX25_DEF_N2;
+ ax25_dev->values[AX25_VALUES_PACLEN] = AX25_DEF_PACLEN;
+ ax25_dev->values[AX25_VALUES_PROTOCOL] = AX25_DEF_PROTOCOL;
+ ax25_dev->values[AX25_VALUES_DS_TIMEOUT]= AX25_DEF_DS_TIMEOUT;
+
+#if defined(CONFIG_AX25_DAMA_SLAVE) || defined(CONFIG_AX25_DAMA_MASTER)
+ init_timer(&ax25_dev->dama.slave_timer);
+#endif
+
+ spin_lock_bh(&ax25_dev_lock);
+ ax25_dev->next = ax25_dev_list;
+ ax25_dev_list = ax25_dev;
+ spin_unlock_bh(&ax25_dev_lock);
+
+ ax25_register_sysctl();
+}
+
+void ax25_dev_device_down(struct net_device *dev)
+{
+ ax25_dev *s, *ax25_dev;
+
+ if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
+ return;
+
+ ax25_unregister_sysctl();
+
+ spin_lock_bh(&ax25_dev_lock);
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ ax25_ds_del_timer(ax25_dev);
+#endif
+
+ /*
+ * Remove any packet forwarding that points to this device.
+ */
+ for (s = ax25_dev_list; s != NULL; s = s->next)
+ if (s->forward == dev)
+ s->forward = NULL;
+
+ if ((s = ax25_dev_list) == ax25_dev) {
+ ax25_dev_list = s->next;
+ spin_unlock_bh(&ax25_dev_lock);
+ dev_put(dev);
+ kfree(ax25_dev);
+ ax25_register_sysctl();
+ return;
+ }
+
+ while (s != NULL && s->next != NULL) {
+ if (s->next == ax25_dev) {
+ s->next = ax25_dev->next;
+ spin_unlock_bh(&ax25_dev_lock);
+ dev_put(dev);
+ kfree(ax25_dev);
+ ax25_register_sysctl();
+ return;
+ }
+
+ s = s->next;
+ }
+ spin_unlock_bh(&ax25_dev_lock);
+ dev->ax25_ptr = NULL;
+
+ ax25_register_sysctl();
+}
+
+int ax25_fwd_ioctl(unsigned int cmd, struct ax25_fwd_struct *fwd)
+{
+ ax25_dev *ax25_dev, *fwd_dev;
+
+ if ((ax25_dev = ax25_addr_ax25dev(&fwd->port_from)) == NULL)
+ return -EINVAL;
+
+ switch (cmd) {
+ case SIOCAX25ADDFWD:
+ if ((fwd_dev = ax25_addr_ax25dev(&fwd->port_to)) == NULL)
+ return -EINVAL;
+ if (ax25_dev->forward != NULL)
+ return -EINVAL;
+ ax25_dev->forward = fwd_dev->dev;
+ break;
+
+ case SIOCAX25DELFWD:
+ if (ax25_dev->forward == NULL)
+ return -EINVAL;
+ ax25_dev->forward = NULL;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+struct net_device *ax25_fwd_dev(struct net_device *dev)
+{
+ ax25_dev *ax25_dev;
+
+ if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
+ return dev;
+
+ if (ax25_dev->forward == NULL)
+ return dev;
+
+ return ax25_dev->forward;
+}
+
+/*
+ * Free all memory associated with device structures.
+ */
+void __exit ax25_dev_free(void)
+{
+ ax25_dev *s, *ax25_dev;
+
+ spin_lock_bh(&ax25_dev_lock);
+ ax25_dev = ax25_dev_list;
+ while (ax25_dev != NULL) {
+ s = ax25_dev;
+ dev_put(ax25_dev->dev);
+ ax25_dev = ax25_dev->next;
+ kfree(s);
+ }
+ ax25_dev_list = NULL;
+ spin_unlock_bh(&ax25_dev_lock);
+}
diff --git a/net/ax25/ax25_ds_in.c b/net/ax25/ax25_ds_in.c
new file mode 100644
index 0000000..8adc002
--- /dev/null
+++ b/net/ax25/ax25_ds_in.c
@@ -0,0 +1,305 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <net/ip.h> /* For ip_rcv */
+#include <net/tcp.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+/*
+ * State machine for state 1, Awaiting Connection State.
+ * The handling of the timer(s) is in file ax25_ds_timer.c.
+ * Handling of state 0 and connection release is in ax25.c.
+ */
+static int ax25_ds_state1_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int pf, int type)
+{
+ switch (frametype) {
+ case AX25_SABM:
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ break;
+
+ case AX25_SABME:
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ break;
+
+ case AX25_DISC:
+ ax25_send_control(ax25, AX25_DM, pf, AX25_RESPONSE);
+ break;
+
+ case AX25_UA:
+ ax25_calculate_rtt(ax25);
+ ax25_stop_t1timer(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_start_idletimer(ax25);
+ ax25->vs = 0;
+ ax25->va = 0;
+ ax25->vr = 0;
+ ax25->state = AX25_STATE_3;
+ ax25->n2count = 0;
+ if (ax25->sk != NULL) {
+ bh_lock_sock(ax25->sk);
+ ax25->sk->sk_state = TCP_ESTABLISHED;
+ /*
+ * For WAIT_SABM connections we will produce an accept
+ * ready socket here
+ */
+ if (!sock_flag(ax25->sk, SOCK_DEAD))
+ ax25->sk->sk_state_change(ax25->sk);
+ bh_unlock_sock(ax25->sk);
+ }
+ ax25_dama_on(ax25);
+
+ /* according to DK4EG´s spec we are required to
+ * send a RR RESPONSE FINAL NR=0.
+ */
+
+ ax25_std_enquiry_response(ax25);
+ break;
+
+ case AX25_DM:
+ if (pf)
+ ax25_disconnect(ax25, ECONNREFUSED);
+ break;
+
+ default:
+ if (pf)
+ ax25_send_control(ax25, AX25_SABM, AX25_POLLON, AX25_COMMAND);
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * State machine for state 2, Awaiting Release State.
+ * The handling of the timer(s) is in file ax25_ds_timer.c
+ * Handling of state 0 and connection release is in ax25.c.
+ */
+static int ax25_ds_state2_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int pf, int type)
+{
+ switch (frametype) {
+ case AX25_SABM:
+ case AX25_SABME:
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ ax25_dama_off(ax25);
+ break;
+
+ case AX25_DISC:
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_dama_off(ax25);
+ ax25_disconnect(ax25, 0);
+ break;
+
+ case AX25_DM:
+ case AX25_UA:
+ if (pf) {
+ ax25_dama_off(ax25);
+ ax25_disconnect(ax25, 0);
+ }
+ break;
+
+ case AX25_I:
+ case AX25_REJ:
+ case AX25_RNR:
+ case AX25_RR:
+ if (pf) {
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ ax25_dama_off(ax25);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * State machine for state 3, Connected State.
+ * The handling of the timer(s) is in file ax25_timer.c
+ * Handling of state 0 and connection release is in ax25.c.
+ */
+static int ax25_ds_state3_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int ns, int nr, int pf, int type)
+{
+ int queued = 0;
+
+ switch (frametype) {
+ case AX25_SABM:
+ case AX25_SABME:
+ if (frametype == AX25_SABM) {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ } else {
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
+ }
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_stop_t1timer(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_start_idletimer(ax25);
+ ax25->condition = 0x00;
+ ax25->vs = 0;
+ ax25->va = 0;
+ ax25->vr = 0;
+ ax25_requeue_frames(ax25);
+ ax25_dama_on(ax25);
+ break;
+
+ case AX25_DISC:
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_dama_off(ax25);
+ ax25_disconnect(ax25, 0);
+ break;
+
+ case AX25_DM:
+ ax25_dama_off(ax25);
+ ax25_disconnect(ax25, ECONNRESET);
+ break;
+
+ case AX25_RR:
+ case AX25_RNR:
+ if (frametype == AX25_RR)
+ ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
+ else
+ ax25->condition |= AX25_COND_PEER_RX_BUSY;
+
+ if (ax25_validate_nr(ax25, nr)) {
+ if (ax25_check_iframes_acked(ax25, nr))
+ ax25->n2count=0;
+ if (type == AX25_COMMAND && pf)
+ ax25_ds_enquiry_response(ax25);
+ } else {
+ ax25_ds_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+
+ case AX25_REJ:
+ ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
+
+ if (ax25_validate_nr(ax25, nr)) {
+ if (ax25->va != nr)
+ ax25->n2count=0;
+
+ ax25_frames_acked(ax25, nr);
+ ax25_calculate_rtt(ax25);
+ ax25_stop_t1timer(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_requeue_frames(ax25);
+
+ if (type == AX25_COMMAND && pf)
+ ax25_ds_enquiry_response(ax25);
+ } else {
+ ax25_ds_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+
+ case AX25_I:
+ if (!ax25_validate_nr(ax25, nr)) {
+ ax25_ds_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ break;
+ }
+ if (ax25->condition & AX25_COND_PEER_RX_BUSY) {
+ ax25_frames_acked(ax25, nr);
+ ax25->n2count = 0;
+ } else {
+ if (ax25_check_iframes_acked(ax25, nr))
+ ax25->n2count = 0;
+ }
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY) {
+ if (pf) ax25_ds_enquiry_response(ax25);
+ break;
+ }
+ if (ns == ax25->vr) {
+ ax25->vr = (ax25->vr + 1) % ax25->modulus;
+ queued = ax25_rx_iframe(ax25, skb);
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY)
+ ax25->vr = ns; /* ax25->vr - 1 */
+ ax25->condition &= ~AX25_COND_REJECT;
+ if (pf) {
+ ax25_ds_enquiry_response(ax25);
+ } else {
+ if (!(ax25->condition & AX25_COND_ACK_PENDING)) {
+ ax25->condition |= AX25_COND_ACK_PENDING;
+ ax25_start_t2timer(ax25);
+ }
+ }
+ } else {
+ if (ax25->condition & AX25_COND_REJECT) {
+ if (pf) ax25_ds_enquiry_response(ax25);
+ } else {
+ ax25->condition |= AX25_COND_REJECT;
+ ax25_ds_enquiry_response(ax25);
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+ }
+ }
+ break;
+
+ case AX25_FRMR:
+ case AX25_ILLEGAL:
+ ax25_ds_establish_data_link(ax25);
+ ax25->state = AX25_STATE_1;
+ break;
+
+ default:
+ break;
+ }
+
+ return queued;
+}
+
+/*
+ * Higher level upcall for a LAPB frame
+ */
+int ax25_ds_frame_in(ax25_cb *ax25, struct sk_buff *skb, int type)
+{
+ int queued = 0, frametype, ns, nr, pf;
+
+ frametype = ax25_decode(ax25, skb, &ns, &nr, &pf);
+
+ switch (ax25->state) {
+ case AX25_STATE_1:
+ queued = ax25_ds_state1_machine(ax25, skb, frametype, pf, type);
+ break;
+ case AX25_STATE_2:
+ queued = ax25_ds_state2_machine(ax25, skb, frametype, pf, type);
+ break;
+ case AX25_STATE_3:
+ queued = ax25_ds_state3_machine(ax25, skb, frametype, ns, nr, pf, type);
+ break;
+ }
+
+ return queued;
+}
+
diff --git a/net/ax25/ax25_ds_subr.c b/net/ax25/ax25_ds_subr.c
new file mode 100644
index 0000000..10ffd2b
--- /dev/null
+++ b/net/ax25/ax25_ds_subr.c
@@ -0,0 +1,212 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/spinlock.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+void ax25_ds_nr_error_recovery(ax25_cb *ax25)
+{
+ ax25_ds_establish_data_link(ax25);
+}
+
+/*
+ * dl1bke 960114: transmit I frames on DAMA poll
+ */
+void ax25_ds_enquiry_response(ax25_cb *ax25)
+{
+ ax25_cb *ax25o;
+ struct hlist_node *node;
+
+ /* Please note that neither DK4EG´s nor DG2FEF´s
+ * DAMA spec mention the following behaviour as seen
+ * with TheFirmware:
+ *
+ * DB0ACH->DL1BKE <RR C P R0> [DAMA]
+ * DL1BKE->DB0ACH <I NR=0 NS=0>
+ * DL1BKE-7->DB0PRA-6 DB0ACH <I C S3 R5>
+ * DL1BKE->DB0ACH <RR R F R0>
+ *
+ * The Flexnet DAMA Master implementation apparently
+ * insists on the "proper" AX.25 behaviour:
+ *
+ * DB0ACH->DL1BKE <RR C P R0> [DAMA]
+ * DL1BKE->DB0ACH <RR R F R0>
+ * DL1BKE->DB0ACH <I NR=0 NS=0>
+ * DL1BKE-7->DB0PRA-6 DB0ACH <I C S3 R5>
+ *
+ * Flexnet refuses to send us *any* I frame if we send
+ * a REJ in case AX25_COND_REJECT is set. It is superfluous in
+ * this mode anyway (a RR or RNR invokes the retransmission).
+ * Is this a Flexnet bug?
+ */
+
+ ax25_std_enquiry_response(ax25);
+
+ if (!(ax25->condition & AX25_COND_PEER_RX_BUSY)) {
+ ax25_requeue_frames(ax25);
+ ax25_kick(ax25);
+ }
+
+ if (ax25->state == AX25_STATE_1 || ax25->state == AX25_STATE_2 || skb_peek(&ax25->ack_queue) != NULL)
+ ax25_ds_t1_timeout(ax25);
+ else
+ ax25->n2count = 0;
+
+ ax25_start_t3timer(ax25);
+ ax25_ds_set_timer(ax25->ax25_dev);
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(ax25o, node, &ax25_list) {
+ if (ax25o == ax25)
+ continue;
+
+ if (ax25o->ax25_dev != ax25->ax25_dev)
+ continue;
+
+ if (ax25o->state == AX25_STATE_1 || ax25o->state == AX25_STATE_2) {
+ ax25_ds_t1_timeout(ax25o);
+ continue;
+ }
+
+ if (!(ax25o->condition & AX25_COND_PEER_RX_BUSY) && ax25o->state == AX25_STATE_3) {
+ ax25_requeue_frames(ax25o);
+ ax25_kick(ax25o);
+ }
+
+ if (ax25o->state == AX25_STATE_1 || ax25o->state == AX25_STATE_2 || skb_peek(&ax25o->ack_queue) != NULL)
+ ax25_ds_t1_timeout(ax25o);
+
+ /* do not start T3 for listening sockets (tnx DD8NE) */
+
+ if (ax25o->state != AX25_STATE_0)
+ ax25_start_t3timer(ax25o);
+ }
+ spin_unlock_bh(&ax25_list_lock);
+}
+
+void ax25_ds_establish_data_link(ax25_cb *ax25)
+{
+ ax25->condition &= AX25_COND_DAMA_MODE;
+ ax25->n2count = 0;
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+ ax25_stop_t2timer(ax25);
+ ax25_start_t3timer(ax25);
+}
+
+/*
+ * :::FIXME:::
+ * This is a kludge. Not all drivers recognize kiss commands.
+ * We need a driver level request to switch duplex mode, that does
+ * either SCC changing, PI config or KISS as required. Currently
+ * this request isn't reliable.
+ */
+static void ax25_kiss_cmd(ax25_dev *ax25_dev, unsigned char cmd, unsigned char param)
+{
+ struct sk_buff *skb;
+ unsigned char *p;
+
+ if (ax25_dev->dev == NULL)
+ return;
+
+ if ((skb = alloc_skb(2, GFP_ATOMIC)) == NULL)
+ return;
+
+ skb->nh.raw = skb->data;
+ p = skb_put(skb, 2);
+
+ *p++ = cmd;
+ *p++ = param;
+
+ skb->dev = ax25_dev->dev;
+ skb->protocol = htons(ETH_P_AX25);
+
+ dev_queue_xmit(skb);
+}
+
+/*
+ * A nasty problem arises if we count the number of DAMA connections
+ * wrong, especially when connections on the device already existed
+ * and our network node (or the sysop) decides to turn on DAMA Master
+ * mode. We thus flag the 'real' slave connections with
+ * ax25->dama_slave=1 and look on every disconnect if still slave
+ * connections exist.
+ */
+static int ax25_check_dama_slave(ax25_dev *ax25_dev)
+{
+ ax25_cb *ax25;
+ int res = 0;
+ struct hlist_node *node;
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(ax25, node, &ax25_list)
+ if (ax25->ax25_dev == ax25_dev && (ax25->condition & AX25_COND_DAMA_MODE) && ax25->state > AX25_STATE_1) {
+ res = 1;
+ break;
+ }
+ spin_unlock_bh(&ax25_list_lock);
+
+ return res;
+}
+
+static void ax25_dev_dama_on(ax25_dev *ax25_dev)
+{
+ if (ax25_dev == NULL)
+ return;
+
+ if (ax25_dev->dama.slave == 0)
+ ax25_kiss_cmd(ax25_dev, 5, 1);
+
+ ax25_dev->dama.slave = 1;
+ ax25_ds_set_timer(ax25_dev);
+}
+
+void ax25_dev_dama_off(ax25_dev *ax25_dev)
+{
+ if (ax25_dev == NULL)
+ return;
+
+ if (ax25_dev->dama.slave && !ax25_check_dama_slave(ax25_dev)) {
+ ax25_kiss_cmd(ax25_dev, 5, 0);
+ ax25_dev->dama.slave = 0;
+ ax25_ds_del_timer(ax25_dev);
+ }
+}
+
+void ax25_dama_on(ax25_cb *ax25)
+{
+ ax25_dev_dama_on(ax25->ax25_dev);
+ ax25->condition |= AX25_COND_DAMA_MODE;
+}
+
+void ax25_dama_off(ax25_cb *ax25)
+{
+ ax25->condition &= ~AX25_COND_DAMA_MODE;
+ ax25_dev_dama_off(ax25->ax25_dev);
+}
+
diff --git a/net/ax25/ax25_ds_timer.c b/net/ax25/ax25_ds_timer.c
new file mode 100644
index 0000000..3a8b673
--- /dev/null
+++ b/net/ax25/ax25_ds_timer.c
@@ -0,0 +1,241 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/spinlock.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/tcp.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+static void ax25_ds_timeout(unsigned long);
+
+/*
+ * Add DAMA slave timeout timer to timer list.
+ * Unlike the connection based timers the timeout function gets
+ * triggered every second. Please note that NET_AX25_DAMA_SLAVE_TIMEOUT
+ * (aka /proc/sys/net/ax25/{dev}/dama_slave_timeout) is still in
+ * 1/10th of a second.
+ */
+
+static void ax25_ds_add_timer(ax25_dev *ax25_dev)
+{
+ struct timer_list *t = &ax25_dev->dama.slave_timer;
+ t->data = (unsigned long) ax25_dev;
+ t->function = &ax25_ds_timeout;
+ t->expires = jiffies + HZ;
+ add_timer(t);
+}
+
+void ax25_ds_del_timer(ax25_dev *ax25_dev)
+{
+ if (ax25_dev)
+ del_timer(&ax25_dev->dama.slave_timer);
+}
+
+void ax25_ds_set_timer(ax25_dev *ax25_dev)
+{
+ if (ax25_dev == NULL) /* paranoia */
+ return;
+
+ del_timer(&ax25_dev->dama.slave_timer);
+ ax25_dev->dama.slave_timeout = ax25_dev->values[AX25_VALUES_DS_TIMEOUT] / 10;
+ ax25_ds_add_timer(ax25_dev);
+}
+
+/*
+ * DAMA Slave Timeout
+ * Silently discard all (slave) connections in case our master forgot us...
+ */
+
+static void ax25_ds_timeout(unsigned long arg)
+{
+ ax25_dev *ax25_dev = (struct ax25_dev *) arg;
+ ax25_cb *ax25;
+ struct hlist_node *node;
+
+ if (ax25_dev == NULL || !ax25_dev->dama.slave)
+ return; /* Yikes! */
+
+ if (!ax25_dev->dama.slave_timeout || --ax25_dev->dama.slave_timeout) {
+ ax25_ds_set_timer(ax25_dev);
+ return;
+ }
+
+ spin_lock_bh(&ax25_list_lock);
+ ax25_for_each(ax25, node, &ax25_list) {
+ if (ax25->ax25_dev != ax25_dev || !(ax25->condition & AX25_COND_DAMA_MODE))
+ continue;
+
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ ax25_disconnect(ax25, ETIMEDOUT);
+ }
+ spin_unlock_bh(&ax25_list_lock);
+
+ ax25_dev_dama_off(ax25_dev);
+}
+
+void ax25_ds_heartbeat_expiry(ax25_cb *ax25)
+{
+ struct sock *sk=ax25->sk;
+
+ if (sk)
+ bh_lock_sock(sk);
+
+ switch (ax25->state) {
+
+ case AX25_STATE_0:
+ /* Magic here: If we listen() and a new link dies before it
+ is accepted() it isn't 'dead' so doesn't get removed. */
+ if (!sk || sock_flag(sk, SOCK_DESTROY) ||
+ (sk->sk_state == TCP_LISTEN &&
+ sock_flag(sk, SOCK_DEAD))) {
+ if (sk) {
+ sock_hold(sk);
+ ax25_destroy_socket(ax25);
+ sock_put(sk);
+ bh_unlock_sock(sk);
+ } else
+ ax25_destroy_socket(ax25);
+ return;
+ }
+ break;
+
+ case AX25_STATE_3:
+ /*
+ * Check the state of the receive buffer.
+ */
+ if (sk != NULL) {
+ if (atomic_read(&sk->sk_rmem_alloc) <
+ (sk->sk_rcvbuf / 2) &&
+ (ax25->condition & AX25_COND_OWN_RX_BUSY)) {
+ ax25->condition &= ~AX25_COND_OWN_RX_BUSY;
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+ break;
+ }
+ }
+ break;
+ }
+
+ if (sk)
+ bh_unlock_sock(sk);
+
+ ax25_start_heartbeat(ax25);
+}
+
+/* dl1bke 960114: T3 works much like the IDLE timeout, but
+ * gets reloaded with every frame for this
+ * connection.
+ */
+void ax25_ds_t3timer_expiry(ax25_cb *ax25)
+{
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ ax25_dama_off(ax25);
+ ax25_disconnect(ax25, ETIMEDOUT);
+}
+
+/* dl1bke 960228: close the connection when IDLE expires.
+ * unlike T3 this timer gets reloaded only on
+ * I frames.
+ */
+void ax25_ds_idletimer_expiry(ax25_cb *ax25)
+{
+ ax25_clear_queues(ax25);
+
+ ax25->n2count = 0;
+ ax25->state = AX25_STATE_2;
+
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+ ax25_stop_t3timer(ax25);
+
+ if (ax25->sk != NULL) {
+ bh_lock_sock(ax25->sk);
+ ax25->sk->sk_state = TCP_CLOSE;
+ ax25->sk->sk_err = 0;
+ ax25->sk->sk_shutdown |= SEND_SHUTDOWN;
+ if (!sock_flag(ax25->sk, SOCK_DEAD)) {
+ ax25->sk->sk_state_change(ax25->sk);
+ sock_set_flag(ax25->sk, SOCK_DEAD);
+ }
+ bh_unlock_sock(ax25->sk);
+ }
+}
+
+/* dl1bke 960114: The DAMA protocol requires to send data and SABM/DISC
+ * within the poll of any connected channel. Remember
+ * that we are not allowed to send anything unless we
+ * get polled by the Master.
+ *
+ * Thus we'll have to do parts of our T1 handling in
+ * ax25_enquiry_response().
+ */
+void ax25_ds_t1_timeout(ax25_cb *ax25)
+{
+ switch (ax25->state) {
+ case AX25_STATE_1:
+ if (ax25->n2count == ax25->n2) {
+ if (ax25->modulus == AX25_MODULUS) {
+ ax25_disconnect(ax25, ETIMEDOUT);
+ return;
+ } else {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ ax25->n2count = 0;
+ ax25_send_control(ax25, AX25_SABM, AX25_POLLOFF, AX25_COMMAND);
+ }
+ } else {
+ ax25->n2count++;
+ if (ax25->modulus == AX25_MODULUS)
+ ax25_send_control(ax25, AX25_SABM, AX25_POLLOFF, AX25_COMMAND);
+ else
+ ax25_send_control(ax25, AX25_SABME, AX25_POLLOFF, AX25_COMMAND);
+ }
+ break;
+
+ case AX25_STATE_2:
+ if (ax25->n2count == ax25->n2) {
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ ax25_disconnect(ax25, ETIMEDOUT);
+ return;
+ } else {
+ ax25->n2count++;
+ }
+ break;
+
+ case AX25_STATE_3:
+ if (ax25->n2count == ax25->n2) {
+ ax25_send_control(ax25, AX25_DM, AX25_POLLON, AX25_RESPONSE);
+ ax25_disconnect(ax25, ETIMEDOUT);
+ return;
+ } else {
+ ax25->n2count++;
+ }
+ break;
+ }
+
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+}
diff --git a/net/ax25/ax25_iface.c b/net/ax25/ax25_iface.c
new file mode 100644
index 0000000..d68aff1
--- /dev/null
+++ b/net/ax25/ax25_iface.c
@@ -0,0 +1,266 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+static struct protocol_struct {
+ struct protocol_struct *next;
+ unsigned int pid;
+ int (*func)(struct sk_buff *, ax25_cb *);
+} *protocol_list = NULL;
+static DEFINE_RWLOCK(protocol_list_lock);
+
+static struct linkfail_struct {
+ struct linkfail_struct *next;
+ void (*func)(ax25_cb *, int);
+} *linkfail_list = NULL;
+static DEFINE_SPINLOCK(linkfail_lock);
+
+static struct listen_struct {
+ struct listen_struct *next;
+ ax25_address callsign;
+ struct net_device *dev;
+} *listen_list = NULL;
+static DEFINE_SPINLOCK(listen_lock);
+
+int ax25_protocol_register(unsigned int pid,
+ int (*func)(struct sk_buff *, ax25_cb *))
+{
+ struct protocol_struct *protocol;
+
+ if (pid == AX25_P_TEXT || pid == AX25_P_SEGMENT)
+ return 0;
+#ifdef CONFIG_INET
+ if (pid == AX25_P_IP || pid == AX25_P_ARP)
+ return 0;
+#endif
+ if ((protocol = kmalloc(sizeof(*protocol), GFP_ATOMIC)) == NULL)
+ return 0;
+
+ protocol->pid = pid;
+ protocol->func = func;
+
+ write_lock(&protocol_list_lock);
+ protocol->next = protocol_list;
+ protocol_list = protocol;
+ write_unlock(&protocol_list_lock);
+
+ return 1;
+}
+
+void ax25_protocol_release(unsigned int pid)
+{
+ struct protocol_struct *s, *protocol;
+
+ write_lock(&protocol_list_lock);
+ protocol = protocol_list;
+ if (protocol == NULL) {
+ write_unlock(&protocol_list_lock);
+ return;
+ }
+
+ if (protocol->pid == pid) {
+ protocol_list = protocol->next;
+ write_unlock(&protocol_list_lock);
+ kfree(protocol);
+ return;
+ }
+
+ while (protocol != NULL && protocol->next != NULL) {
+ if (protocol->next->pid == pid) {
+ s = protocol->next;
+ protocol->next = protocol->next->next;
+ write_unlock(&protocol_list_lock);
+ kfree(s);
+ return;
+ }
+
+ protocol = protocol->next;
+ }
+ write_unlock(&protocol_list_lock);
+}
+
+int ax25_linkfail_register(void (*func)(ax25_cb *, int))
+{
+ struct linkfail_struct *linkfail;
+
+ if ((linkfail = kmalloc(sizeof(*linkfail), GFP_ATOMIC)) == NULL)
+ return 0;
+
+ linkfail->func = func;
+
+ spin_lock_bh(&linkfail_lock);
+ linkfail->next = linkfail_list;
+ linkfail_list = linkfail;
+ spin_unlock_bh(&linkfail_lock);
+
+ return 1;
+}
+
+void ax25_linkfail_release(void (*func)(ax25_cb *, int))
+{
+ struct linkfail_struct *s, *linkfail;
+
+ spin_lock_bh(&linkfail_lock);
+ linkfail = linkfail_list;
+ if (linkfail == NULL) {
+ spin_unlock_bh(&linkfail_lock);
+ return;
+ }
+
+ if (linkfail->func == func) {
+ linkfail_list = linkfail->next;
+ spin_unlock_bh(&linkfail_lock);
+ kfree(linkfail);
+ return;
+ }
+
+ while (linkfail != NULL && linkfail->next != NULL) {
+ if (linkfail->next->func == func) {
+ s = linkfail->next;
+ linkfail->next = linkfail->next->next;
+ spin_unlock_bh(&linkfail_lock);
+ kfree(s);
+ return;
+ }
+
+ linkfail = linkfail->next;
+ }
+ spin_unlock_bh(&linkfail_lock);
+}
+
+int ax25_listen_register(ax25_address *callsign, struct net_device *dev)
+{
+ struct listen_struct *listen;
+
+ if (ax25_listen_mine(callsign, dev))
+ return 0;
+
+ if ((listen = kmalloc(sizeof(*listen), GFP_ATOMIC)) == NULL)
+ return 0;
+
+ listen->callsign = *callsign;
+ listen->dev = dev;
+
+ spin_lock_bh(&listen_lock);
+ listen->next = listen_list;
+ listen_list = listen;
+ spin_unlock_bh(&listen_lock);
+
+ return 1;
+}
+
+void ax25_listen_release(ax25_address *callsign, struct net_device *dev)
+{
+ struct listen_struct *s, *listen;
+
+ spin_lock_bh(&listen_lock);
+ listen = listen_list;
+ if (listen == NULL) {
+ spin_unlock_bh(&listen_lock);
+ return;
+ }
+
+ if (ax25cmp(&listen->callsign, callsign) == 0 && listen->dev == dev) {
+ listen_list = listen->next;
+ spin_unlock_bh(&listen_lock);
+ kfree(listen);
+ return;
+ }
+
+ while (listen != NULL && listen->next != NULL) {
+ if (ax25cmp(&listen->next->callsign, callsign) == 0 && listen->next->dev == dev) {
+ s = listen->next;
+ listen->next = listen->next->next;
+ spin_unlock_bh(&listen_lock);
+ kfree(s);
+ return;
+ }
+
+ listen = listen->next;
+ }
+ spin_unlock_bh(&listen_lock);
+}
+
+int (*ax25_protocol_function(unsigned int pid))(struct sk_buff *, ax25_cb *)
+{
+ int (*res)(struct sk_buff *, ax25_cb *) = NULL;
+ struct protocol_struct *protocol;
+
+ read_lock(&protocol_list_lock);
+ for (protocol = protocol_list; protocol != NULL; protocol = protocol->next)
+ if (protocol->pid == pid) {
+ res = protocol->func;
+ break;
+ }
+ read_unlock(&protocol_list_lock);
+
+ return res;
+}
+
+int ax25_listen_mine(ax25_address *callsign, struct net_device *dev)
+{
+ struct listen_struct *listen;
+
+ spin_lock_bh(&listen_lock);
+ for (listen = listen_list; listen != NULL; listen = listen->next)
+ if (ax25cmp(&listen->callsign, callsign) == 0 && (listen->dev == dev || listen->dev == NULL)) {
+ spin_unlock_bh(&listen_lock);
+ return 1;
+ }
+ spin_unlock_bh(&listen_lock);
+
+ return 0;
+}
+
+void ax25_link_failed(ax25_cb *ax25, int reason)
+{
+ struct linkfail_struct *linkfail;
+
+ spin_lock_bh(&linkfail_lock);
+ for (linkfail = linkfail_list; linkfail != NULL; linkfail = linkfail->next)
+ (linkfail->func)(ax25, reason);
+ spin_unlock_bh(&linkfail_lock);
+}
+
+int ax25_protocol_is_registered(unsigned int pid)
+{
+ struct protocol_struct *protocol;
+ int res = 0;
+
+ read_lock(&protocol_list_lock);
+ for (protocol = protocol_list; protocol != NULL; protocol = protocol->next)
+ if (protocol->pid == pid) {
+ res = 1;
+ break;
+ }
+ read_unlock(&protocol_list_lock);
+
+ return res;
+}
diff --git a/net/ax25/ax25_in.c b/net/ax25/ax25_in.c
new file mode 100644
index 0000000..3dc808f
--- /dev/null
+++ b/net/ax25/ax25_in.c
@@ -0,0 +1,470 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Hans-Joachim Hetscher DD8NE (dd8ne@bnv-bamberg.de)
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/netfilter.h>
+#include <net/sock.h>
+#include <net/ip.h> /* For ip_rcv */
+#include <net/tcp.h>
+#include <net/arp.h> /* For arp_rcv */
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+/*
+ * Given a fragment, queue it on the fragment queue and if the fragment
+ * is complete, send it back to ax25_rx_iframe.
+ */
+static int ax25_rx_fragment(ax25_cb *ax25, struct sk_buff *skb)
+{
+ struct sk_buff *skbn, *skbo;
+
+ if (ax25->fragno != 0) {
+ if (!(*skb->data & AX25_SEG_FIRST)) {
+ if ((ax25->fragno - 1) == (*skb->data & AX25_SEG_REM)) {
+ /* Enqueue fragment */
+ ax25->fragno = *skb->data & AX25_SEG_REM;
+ skb_pull(skb, 1); /* skip fragno */
+ ax25->fraglen += skb->len;
+ skb_queue_tail(&ax25->frag_queue, skb);
+
+ /* Last fragment received ? */
+ if (ax25->fragno == 0) {
+ skbn = alloc_skb(AX25_MAX_HEADER_LEN +
+ ax25->fraglen,
+ GFP_ATOMIC);
+ if (!skbn) {
+ skb_queue_purge(&ax25->frag_queue);
+ return 1;
+ }
+
+ skb_reserve(skbn, AX25_MAX_HEADER_LEN);
+
+ skbn->dev = ax25->ax25_dev->dev;
+ skbn->h.raw = skbn->data;
+ skbn->nh.raw = skbn->data;
+
+ /* Copy data from the fragments */
+ while ((skbo = skb_dequeue(&ax25->frag_queue)) != NULL) {
+ memcpy(skb_put(skbn, skbo->len), skbo->data, skbo->len);
+ kfree_skb(skbo);
+ }
+
+ ax25->fraglen = 0;
+
+ if (ax25_rx_iframe(ax25, skbn) == 0)
+ kfree_skb(skbn);
+ }
+
+ return 1;
+ }
+ }
+ } else {
+ /* First fragment received */
+ if (*skb->data & AX25_SEG_FIRST) {
+ skb_queue_purge(&ax25->frag_queue);
+ ax25->fragno = *skb->data & AX25_SEG_REM;
+ skb_pull(skb, 1); /* skip fragno */
+ ax25->fraglen = skb->len;
+ skb_queue_tail(&ax25->frag_queue, skb);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This is where all valid I frames are sent to, to be dispatched to
+ * whichever protocol requires them.
+ */
+int ax25_rx_iframe(ax25_cb *ax25, struct sk_buff *skb)
+{
+ int (*func)(struct sk_buff *, ax25_cb *);
+ volatile int queued = 0;
+ unsigned char pid;
+
+ if (skb == NULL) return 0;
+
+ ax25_start_idletimer(ax25);
+
+ pid = *skb->data;
+
+#ifdef CONFIG_INET
+ if (pid == AX25_P_IP) {
+ /* working around a TCP bug to keep additional listeners
+ * happy. TCP re-uses the buffer and destroys the original
+ * content.
+ */
+ struct sk_buff *skbn = skb_copy(skb, GFP_ATOMIC);
+ if (skbn != NULL) {
+ kfree_skb(skb);
+ skb = skbn;
+ }
+
+ skb_pull(skb, 1); /* Remove PID */
+ skb->h.raw = skb->data;
+ skb->nh.raw = skb->data;
+ skb->dev = ax25->ax25_dev->dev;
+ skb->pkt_type = PACKET_HOST;
+ skb->protocol = htons(ETH_P_IP);
+ ip_rcv(skb, skb->dev, NULL); /* Wrong ptype */
+ return 1;
+ }
+#endif
+ if (pid == AX25_P_SEGMENT) {
+ skb_pull(skb, 1); /* Remove PID */
+ return ax25_rx_fragment(ax25, skb);
+ }
+
+ if ((func = ax25_protocol_function(pid)) != NULL) {
+ skb_pull(skb, 1); /* Remove PID */
+ return (*func)(skb, ax25);
+ }
+
+ if (ax25->sk != NULL && ax25->ax25_dev->values[AX25_VALUES_CONMODE] == 2) {
+ if ((!ax25->pidincl && ax25->sk->sk_protocol == pid) ||
+ ax25->pidincl) {
+ if (sock_queue_rcv_skb(ax25->sk, skb) == 0)
+ queued = 1;
+ else
+ ax25->condition |= AX25_COND_OWN_RX_BUSY;
+ }
+ }
+
+ return queued;
+}
+
+/*
+ * Higher level upcall for a LAPB frame
+ */
+static int ax25_process_rx_frame(ax25_cb *ax25, struct sk_buff *skb, int type, int dama)
+{
+ int queued = 0;
+
+ if (ax25->state == AX25_STATE_0)
+ return 0;
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ queued = ax25_std_frame_in(ax25, skb, type);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ if (dama || ax25->ax25_dev->dama.slave)
+ queued = ax25_ds_frame_in(ax25, skb, type);
+ else
+ queued = ax25_std_frame_in(ax25, skb, type);
+ break;
+#endif
+ }
+
+ return queued;
+}
+
+static int ax25_rcv(struct sk_buff *skb, struct net_device *dev,
+ ax25_address *dev_addr, struct packet_type *ptype)
+{
+ ax25_address src, dest, *next_digi = NULL;
+ int type = 0, mine = 0, dama;
+ struct sock *make, *sk;
+ ax25_digi dp, reverse_dp;
+ ax25_cb *ax25;
+ ax25_dev *ax25_dev;
+
+ /*
+ * Process the AX.25/LAPB frame.
+ */
+
+ skb->h.raw = skb->data;
+
+ if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ /*
+ * Parse the address header.
+ */
+
+ if (ax25_addr_parse(skb->data, skb->len, &src, &dest, &dp, &type, &dama) == NULL) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ /*
+ * Ours perhaps ?
+ */
+ if (dp.lastrepeat + 1 < dp.ndigi) /* Not yet digipeated completely */
+ next_digi = &dp.calls[dp.lastrepeat + 1];
+
+ /*
+ * Pull of the AX.25 headers leaving the CTRL/PID bytes
+ */
+ skb_pull(skb, ax25_addr_size(&dp));
+
+ /* For our port addresses ? */
+ if (ax25cmp(&dest, dev_addr) == 0 && dp.lastrepeat + 1 == dp.ndigi)
+ mine = 1;
+
+ /* Also match on any registered callsign from L3/4 */
+ if (!mine && ax25_listen_mine(&dest, dev) && dp.lastrepeat + 1 == dp.ndigi)
+ mine = 1;
+
+ /* UI frame - bypass LAPB processing */
+ if ((*skb->data & ~0x10) == AX25_UI && dp.lastrepeat + 1 == dp.ndigi) {
+ skb->h.raw = skb->data + 2; /* skip control and pid */
+
+ ax25_send_to_raw(&dest, skb, skb->data[1]);
+
+ if (!mine && ax25cmp(&dest, (ax25_address *)dev->broadcast) != 0) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ /* Now we are pointing at the pid byte */
+ switch (skb->data[1]) {
+#ifdef CONFIG_INET
+ case AX25_P_IP:
+ skb_pull(skb,2); /* drop PID/CTRL */
+ skb->h.raw = skb->data;
+ skb->nh.raw = skb->data;
+ skb->dev = dev;
+ skb->pkt_type = PACKET_HOST;
+ skb->protocol = htons(ETH_P_IP);
+ ip_rcv(skb, dev, ptype); /* Note ptype here is the wrong one, fix me later */
+ break;
+
+ case AX25_P_ARP:
+ skb_pull(skb,2);
+ skb->h.raw = skb->data;
+ skb->nh.raw = skb->data;
+ skb->dev = dev;
+ skb->pkt_type = PACKET_HOST;
+ skb->protocol = htons(ETH_P_ARP);
+ arp_rcv(skb, dev, ptype); /* Note ptype here is wrong... */
+ break;
+#endif
+ case AX25_P_TEXT:
+ /* Now find a suitable dgram socket */
+ sk = ax25_get_socket(&dest, &src, SOCK_DGRAM);
+ if (sk != NULL) {
+ bh_lock_sock(sk);
+ if (atomic_read(&sk->sk_rmem_alloc) >=
+ sk->sk_rcvbuf) {
+ kfree_skb(skb);
+ } else {
+ /*
+ * Remove the control and PID.
+ */
+ skb_pull(skb, 2);
+ if (sock_queue_rcv_skb(sk, skb) != 0)
+ kfree_skb(skb);
+ }
+ bh_unlock_sock(sk);
+ sock_put(sk);
+ } else {
+ kfree_skb(skb);
+ }
+ break;
+
+ default:
+ kfree_skb(skb); /* Will scan SOCK_AX25 RAW sockets */
+ break;
+ }
+
+ return 0;
+ }
+
+ /*
+ * Is connected mode supported on this device ?
+ * If not, should we DM the incoming frame (except DMs) or
+ * silently ignore them. For now we stay quiet.
+ */
+ if (ax25_dev->values[AX25_VALUES_CONMODE] == 0) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ /* LAPB */
+
+ /* AX.25 state 1-4 */
+
+ ax25_digi_invert(&dp, &reverse_dp);
+
+ if ((ax25 = ax25_find_cb(&dest, &src, &reverse_dp, dev)) != NULL) {
+ /*
+ * Process the frame. If it is queued up internally it
+ * returns one otherwise we free it immediately. This
+ * routine itself wakes the user context layers so we do
+ * no further work
+ */
+ if (ax25_process_rx_frame(ax25, skb, type, dama) == 0)
+ kfree_skb(skb);
+
+ ax25_cb_put(ax25);
+ return 0;
+ }
+
+ /* AX.25 state 0 (disconnected) */
+
+ /* a) received not a SABM(E) */
+
+ if ((*skb->data & ~AX25_PF) != AX25_SABM &&
+ (*skb->data & ~AX25_PF) != AX25_SABME) {
+ /*
+ * Never reply to a DM. Also ignore any connects for
+ * addresses that are not our interfaces and not a socket.
+ */
+ if ((*skb->data & ~AX25_PF) != AX25_DM && mine)
+ ax25_return_dm(dev, &src, &dest, &dp);
+
+ kfree_skb(skb);
+ return 0;
+ }
+
+ /* b) received SABM(E) */
+
+ if (dp.lastrepeat + 1 == dp.ndigi)
+ sk = ax25_find_listener(&dest, 0, dev, SOCK_SEQPACKET);
+ else
+ sk = ax25_find_listener(next_digi, 1, dev, SOCK_SEQPACKET);
+
+ if (sk != NULL) {
+ bh_lock_sock(sk);
+ if (sk_acceptq_is_full(sk) ||
+ (make = ax25_make_new(sk, ax25_dev)) == NULL) {
+ if (mine)
+ ax25_return_dm(dev, &src, &dest, &dp);
+ kfree_skb(skb);
+ bh_unlock_sock(sk);
+ sock_put(sk);
+
+ return 0;
+ }
+
+ ax25 = ax25_sk(make);
+ skb_set_owner_r(skb, make);
+ skb_queue_head(&sk->sk_receive_queue, skb);
+
+ make->sk_state = TCP_ESTABLISHED;
+
+ sk->sk_ack_backlog++;
+ bh_unlock_sock(sk);
+ } else {
+ if (!mine) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ if ((ax25 = ax25_create_cb()) == NULL) {
+ ax25_return_dm(dev, &src, &dest, &dp);
+ kfree_skb(skb);
+ return 0;
+ }
+
+ ax25_fillin_cb(ax25, ax25_dev);
+ }
+
+ ax25->source_addr = dest;
+ ax25->dest_addr = src;
+
+ /*
+ * Sort out any digipeated paths.
+ */
+ if (dp.ndigi && !ax25->digipeat &&
+ (ax25->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
+ kfree_skb(skb);
+ ax25_destroy_socket(ax25);
+ if (sk)
+ sock_put(sk);
+ return 0;
+ }
+
+ if (dp.ndigi == 0) {
+ if (ax25->digipeat != NULL) {
+ kfree(ax25->digipeat);
+ ax25->digipeat = NULL;
+ }
+ } else {
+ /* Reverse the source SABM's path */
+ memcpy(ax25->digipeat, &reverse_dp, sizeof(ax25_digi));
+ }
+
+ if ((*skb->data & ~AX25_PF) == AX25_SABME) {
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = ax25_dev->values[AX25_VALUES_EWINDOW];
+ } else {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25_dev->values[AX25_VALUES_WINDOW];
+ }
+
+ ax25_send_control(ax25, AX25_UA, AX25_POLLON, AX25_RESPONSE);
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ if (dama && ax25->ax25_dev->values[AX25_VALUES_PROTOCOL] == AX25_PROTO_DAMA_SLAVE)
+ ax25_dama_on(ax25);
+#endif
+
+ ax25->state = AX25_STATE_3;
+
+ ax25_cb_add(ax25);
+
+ ax25_start_heartbeat(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_start_idletimer(ax25);
+
+ if (sk) {
+ if (!sock_flag(sk, SOCK_DEAD))
+ sk->sk_data_ready(sk, skb->len);
+ sock_put(sk);
+ } else
+ kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Receive an AX.25 frame via a SLIP interface.
+ */
+int ax25_kiss_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *ptype)
+{
+ skb->sk = NULL; /* Initially we don't know who it's for */
+ skb->destructor = NULL; /* Who initializes this, dammit?! */
+
+ if ((*skb->data & 0x0F) != 0) {
+ kfree_skb(skb); /* Not a KISS data frame */
+ return 0;
+ }
+
+ skb_pull(skb, AX25_KISS_HEADER_LEN); /* Remove the KISS byte */
+
+ return ax25_rcv(skb, dev, (ax25_address *)dev->dev_addr, ptype);
+}
diff --git a/net/ax25/ax25_ip.c b/net/ax25/ax25_ip.c
new file mode 100644
index 0000000..04d7113
--- /dev/null
+++ b/net/ax25/ax25_ip.c
@@ -0,0 +1,225 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/termios.h> /* For TIOCINQ/OUTQ */
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/netfilter.h>
+#include <linux/sysctl.h>
+#include <net/ip.h>
+#include <net/arp.h>
+
+/*
+ * IP over AX.25 encapsulation.
+ */
+
+/*
+ * Shove an AX.25 UI header on an IP packet and handle ARP
+ */
+
+#ifdef CONFIG_INET
+
+int ax25_encapsulate(struct sk_buff *skb, struct net_device *dev, unsigned short type, void *daddr, void *saddr, unsigned len)
+{
+ unsigned char *buff;
+
+ /* they sometimes come back to us... */
+ if (type == ETH_P_AX25)
+ return 0;
+
+ /* header is an AX.25 UI frame from us to them */
+ buff = skb_push(skb, AX25_HEADER_LEN);
+ *buff++ = 0x00; /* KISS DATA */
+
+ if (daddr != NULL)
+ memcpy(buff, daddr, dev->addr_len); /* Address specified */
+
+ buff[6] &= ~AX25_CBIT;
+ buff[6] &= ~AX25_EBIT;
+ buff[6] |= AX25_SSSID_SPARE;
+ buff += AX25_ADDR_LEN;
+
+ if (saddr != NULL)
+ memcpy(buff, saddr, dev->addr_len);
+ else
+ memcpy(buff, dev->dev_addr, dev->addr_len);
+
+ buff[6] &= ~AX25_CBIT;
+ buff[6] |= AX25_EBIT;
+ buff[6] |= AX25_SSSID_SPARE;
+ buff += AX25_ADDR_LEN;
+
+ *buff++ = AX25_UI; /* UI */
+
+ /* Append a suitable AX.25 PID */
+ switch (type) {
+ case ETH_P_IP:
+ *buff++ = AX25_P_IP;
+ break;
+ case ETH_P_ARP:
+ *buff++ = AX25_P_ARP;
+ break;
+ default:
+ printk(KERN_ERR "AX.25: ax25_encapsulate - wrong protocol type 0x%2.2x\n", type);
+ *buff++ = 0;
+ break;
+ }
+
+ if (daddr != NULL)
+ return AX25_HEADER_LEN;
+
+ return -AX25_HEADER_LEN; /* Unfinished header */
+}
+
+int ax25_rebuild_header(struct sk_buff *skb)
+{
+ struct sk_buff *ourskb;
+ unsigned char *bp = skb->data;
+ struct net_device *dev;
+ ax25_address *src, *dst;
+ ax25_dev *ax25_dev;
+ ax25_route _route, *route = &_route;
+ ax25_cb *ax25;
+
+ dst = (ax25_address *)(bp + 1);
+ src = (ax25_address *)(bp + 8);
+
+ if (arp_find(bp + 1, skb))
+ return 1;
+
+ route = ax25_rt_find_route(route, dst, NULL);
+ dev = route->dev;
+
+ if (dev == NULL)
+ dev = skb->dev;
+
+ if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL) {
+ goto put;
+ }
+
+ if (bp[16] == AX25_P_IP) {
+ if (route->ip_mode == 'V' || (route->ip_mode == ' ' && ax25_dev->values[AX25_VALUES_IPDEFMODE])) {
+ /*
+ * We copy the buffer and release the original thereby
+ * keeping it straight
+ *
+ * Note: we report 1 back so the caller will
+ * not feed the frame direct to the physical device
+ * We don't want that to happen. (It won't be upset
+ * as we have pulled the frame from the queue by
+ * freeing it).
+ *
+ * NB: TCP modifies buffers that are still
+ * on a device queue, thus we use skb_copy()
+ * instead of using skb_clone() unless this
+ * gets fixed.
+ */
+
+ ax25_address src_c;
+ ax25_address dst_c;
+
+ if ((ourskb = skb_copy(skb, GFP_ATOMIC)) == NULL) {
+ kfree_skb(skb);
+ goto put;
+ }
+
+ if (skb->sk != NULL)
+ skb_set_owner_w(ourskb, skb->sk);
+
+ kfree_skb(skb);
+ /* dl9sau: bugfix
+ * after kfree_skb(), dst and src which were pointer
+ * to bp which is part of skb->data would not be valid
+ * anymore hope that after skb_pull(ourskb, ..) our
+ * dsc_c and src_c will not become invalid
+ */
+ bp = ourskb->data;
+ dst_c = *(ax25_address *)(bp + 1);
+ src_c = *(ax25_address *)(bp + 8);
+
+ skb_pull(ourskb, AX25_HEADER_LEN - 1); /* Keep PID */
+ ourskb->nh.raw = ourskb->data;
+
+ ax25=ax25_send_frame(
+ ourskb,
+ ax25_dev->values[AX25_VALUES_PACLEN],
+ &src_c,
+ &dst_c, route->digipeat, dev);
+ if (ax25) {
+ ax25_cb_put(ax25);
+ }
+ goto put;
+ }
+ }
+
+ bp[7] &= ~AX25_CBIT;
+ bp[7] &= ~AX25_EBIT;
+ bp[7] |= AX25_SSSID_SPARE;
+
+ bp[14] &= ~AX25_CBIT;
+ bp[14] |= AX25_EBIT;
+ bp[14] |= AX25_SSSID_SPARE;
+
+ skb_pull(skb, AX25_KISS_HEADER_LEN);
+
+ if (route->digipeat != NULL) {
+ if ((ourskb = ax25_rt_build_path(skb, src, dst, route->digipeat)) == NULL) {
+ kfree_skb(skb);
+ goto put;
+ }
+
+ skb = ourskb;
+ }
+
+ skb->dev = dev;
+
+ ax25_queue_xmit(skb);
+
+put:
+ ax25_put_route(route);
+
+ return 1;
+}
+
+#else /* INET */
+
+int ax25_encapsulate(struct sk_buff *skb, struct net_device *dev, unsigned short type, void *daddr, void *saddr, unsigned len)
+{
+ return -AX25_HEADER_LEN;
+}
+
+int ax25_rebuild_header(struct sk_buff *skb)
+{
+ return 1;
+}
+
+#endif
+
diff --git a/net/ax25/ax25_out.c b/net/ax25/ax25_out.c
new file mode 100644
index 0000000..3475a3a
--- /dev/null
+++ b/net/ax25/ax25_out.c
@@ -0,0 +1,383 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/spinlock.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/netfilter.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+static DEFINE_SPINLOCK(ax25_frag_lock);
+
+ax25_cb *ax25_send_frame(struct sk_buff *skb, int paclen, ax25_address *src, ax25_address *dest, ax25_digi *digi, struct net_device *dev)
+{
+ ax25_dev *ax25_dev;
+ ax25_cb *ax25;
+
+ /*
+ * Take the default packet length for the device if zero is
+ * specified.
+ */
+ if (paclen == 0) {
+ if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
+ return NULL;
+
+ paclen = ax25_dev->values[AX25_VALUES_PACLEN];
+ }
+
+ /*
+ * Look for an existing connection.
+ */
+ if ((ax25 = ax25_find_cb(src, dest, digi, dev)) != NULL) {
+ ax25_output(ax25, paclen, skb);
+ return ax25; /* It already existed */
+ }
+
+ if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
+ return NULL;
+
+ if ((ax25 = ax25_create_cb()) == NULL)
+ return NULL;
+
+ ax25_fillin_cb(ax25, ax25_dev);
+
+ ax25->source_addr = *src;
+ ax25->dest_addr = *dest;
+
+ if (digi != NULL) {
+ if ((ax25->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
+ ax25_cb_put(ax25);
+ return NULL;
+ }
+ memcpy(ax25->digipeat, digi, sizeof(ax25_digi));
+ }
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_std_establish_data_link(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ if (ax25_dev->dama.slave)
+ ax25_ds_establish_data_link(ax25);
+ else
+ ax25_std_establish_data_link(ax25);
+ break;
+#endif
+ }
+
+ ax25_cb_add(ax25);
+
+ ax25->state = AX25_STATE_1;
+
+ ax25_start_heartbeat(ax25);
+
+ ax25_output(ax25, paclen, skb);
+
+ return ax25; /* We had to create it */
+}
+
+/*
+ * All outgoing AX.25 I frames pass via this routine. Therefore this is
+ * where the fragmentation of frames takes place. If fragment is set to
+ * zero then we are not allowed to do fragmentation, even if the frame
+ * is too large.
+ */
+void ax25_output(ax25_cb *ax25, int paclen, struct sk_buff *skb)
+{
+ struct sk_buff *skbn;
+ unsigned char *p;
+ int frontlen, len, fragno, ka9qfrag, first = 1;
+
+ if ((skb->len - 1) > paclen) {
+ if (*skb->data == AX25_P_TEXT) {
+ skb_pull(skb, 1); /* skip PID */
+ ka9qfrag = 0;
+ } else {
+ paclen -= 2; /* Allow for fragment control info */
+ ka9qfrag = 1;
+ }
+
+ fragno = skb->len / paclen;
+ if (skb->len % paclen == 0) fragno--;
+
+ frontlen = skb_headroom(skb); /* Address space + CTRL */
+
+ while (skb->len > 0) {
+ spin_lock_bh(&ax25_frag_lock);
+ if ((skbn = alloc_skb(paclen + 2 + frontlen, GFP_ATOMIC)) == NULL) {
+ spin_unlock_bh(&ax25_frag_lock);
+ printk(KERN_CRIT "AX.25: ax25_output - out of memory\n");
+ return;
+ }
+
+ if (skb->sk != NULL)
+ skb_set_owner_w(skbn, skb->sk);
+
+ spin_unlock_bh(&ax25_frag_lock);
+
+ len = (paclen > skb->len) ? skb->len : paclen;
+
+ if (ka9qfrag == 1) {
+ skb_reserve(skbn, frontlen + 2);
+ skbn->nh.raw = skbn->data + (skb->nh.raw - skb->data);
+ memcpy(skb_put(skbn, len), skb->data, len);
+ p = skb_push(skbn, 2);
+
+ *p++ = AX25_P_SEGMENT;
+
+ *p = fragno--;
+ if (first) {
+ *p |= AX25_SEG_FIRST;
+ first = 0;
+ }
+ } else {
+ skb_reserve(skbn, frontlen + 1);
+ skbn->nh.raw = skbn->data + (skb->nh.raw - skb->data);
+ memcpy(skb_put(skbn, len), skb->data, len);
+ p = skb_push(skbn, 1);
+ *p = AX25_P_TEXT;
+ }
+
+ skb_pull(skb, len);
+ skb_queue_tail(&ax25->write_queue, skbn); /* Throw it on the queue */
+ }
+
+ kfree_skb(skb);
+ } else {
+ skb_queue_tail(&ax25->write_queue, skb); /* Throw it on the queue */
+ }
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_kick(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ /*
+ * A DAMA slave is _required_ to work as normal AX.25L2V2
+ * if no DAMA master is available.
+ */
+ case AX25_PROTO_DAMA_SLAVE:
+ if (!ax25->ax25_dev->dama.slave) ax25_kick(ax25);
+ break;
+#endif
+ }
+}
+
+/*
+ * This procedure is passed a buffer descriptor for an iframe. It builds
+ * the rest of the control part of the frame and then writes it out.
+ */
+static void ax25_send_iframe(ax25_cb *ax25, struct sk_buff *skb, int poll_bit)
+{
+ unsigned char *frame;
+
+ if (skb == NULL)
+ return;
+
+ skb->nh.raw = skb->data;
+
+ if (ax25->modulus == AX25_MODULUS) {
+ frame = skb_push(skb, 1);
+
+ *frame = AX25_I;
+ *frame |= (poll_bit) ? AX25_PF : 0;
+ *frame |= (ax25->vr << 5);
+ *frame |= (ax25->vs << 1);
+ } else {
+ frame = skb_push(skb, 2);
+
+ frame[0] = AX25_I;
+ frame[0] |= (ax25->vs << 1);
+ frame[1] = (poll_bit) ? AX25_EPF : 0;
+ frame[1] |= (ax25->vr << 1);
+ }
+
+ ax25_start_idletimer(ax25);
+
+ ax25_transmit_buffer(ax25, skb, AX25_COMMAND);
+}
+
+void ax25_kick(ax25_cb *ax25)
+{
+ struct sk_buff *skb, *skbn;
+ int last = 1;
+ unsigned short start, end, next;
+
+ if (ax25->state != AX25_STATE_3 && ax25->state != AX25_STATE_4)
+ return;
+
+ if (ax25->condition & AX25_COND_PEER_RX_BUSY)
+ return;
+
+ if (skb_peek(&ax25->write_queue) == NULL)
+ return;
+
+ start = (skb_peek(&ax25->ack_queue) == NULL) ? ax25->va : ax25->vs;
+ end = (ax25->va + ax25->window) % ax25->modulus;
+
+ if (start == end)
+ return;
+
+ ax25->vs = start;
+
+ /*
+ * Transmit data until either we're out of data to send or
+ * the window is full. Send a poll on the final I frame if
+ * the window is filled.
+ */
+
+ /*
+ * Dequeue the frame and copy it.
+ */
+ skb = skb_dequeue(&ax25->write_queue);
+
+ do {
+ if ((skbn = skb_clone(skb, GFP_ATOMIC)) == NULL) {
+ skb_queue_head(&ax25->write_queue, skb);
+ break;
+ }
+
+ if (skb->sk != NULL)
+ skb_set_owner_w(skbn, skb->sk);
+
+ next = (ax25->vs + 1) % ax25->modulus;
+ last = (next == end);
+
+ /*
+ * Transmit the frame copy.
+ * bke 960114: do not set the Poll bit on the last frame
+ * in DAMA mode.
+ */
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_send_iframe(ax25, skbn, (last) ? AX25_POLLON : AX25_POLLOFF);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ ax25_send_iframe(ax25, skbn, AX25_POLLOFF);
+ break;
+#endif
+ }
+
+ ax25->vs = next;
+
+ /*
+ * Requeue the original data frame.
+ */
+ skb_queue_tail(&ax25->ack_queue, skb);
+
+ } while (!last && (skb = skb_dequeue(&ax25->write_queue)) != NULL);
+
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+
+ if (!ax25_t1timer_running(ax25)) {
+ ax25_stop_t3timer(ax25);
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+ }
+}
+
+void ax25_transmit_buffer(ax25_cb *ax25, struct sk_buff *skb, int type)
+{
+ struct sk_buff *skbn;
+ unsigned char *ptr;
+ int headroom;
+
+ if (ax25->ax25_dev == NULL) {
+ ax25_disconnect(ax25, ENETUNREACH);
+ return;
+ }
+
+ headroom = ax25_addr_size(ax25->digipeat);
+
+ if (skb_headroom(skb) < headroom) {
+ if ((skbn = skb_realloc_headroom(skb, headroom)) == NULL) {
+ printk(KERN_CRIT "AX.25: ax25_transmit_buffer - out of memory\n");
+ kfree_skb(skb);
+ return;
+ }
+
+ if (skb->sk != NULL)
+ skb_set_owner_w(skbn, skb->sk);
+
+ kfree_skb(skb);
+ skb = skbn;
+ }
+
+ ptr = skb_push(skb, headroom);
+
+ ax25_addr_build(ptr, &ax25->source_addr, &ax25->dest_addr, ax25->digipeat, type, ax25->modulus);
+
+ skb->dev = ax25->ax25_dev->dev;
+
+ ax25_queue_xmit(skb);
+}
+
+/*
+ * A small shim to dev_queue_xmit to add the KISS control byte, and do
+ * any packet forwarding in operation.
+ */
+void ax25_queue_xmit(struct sk_buff *skb)
+{
+ unsigned char *ptr;
+
+ skb->protocol = htons(ETH_P_AX25);
+ skb->dev = ax25_fwd_dev(skb->dev);
+
+ ptr = skb_push(skb, 1);
+ *ptr = 0x00; /* KISS */
+
+ dev_queue_xmit(skb);
+}
+
+int ax25_check_iframes_acked(ax25_cb *ax25, unsigned short nr)
+{
+ if (ax25->vs == nr) {
+ ax25_frames_acked(ax25, nr);
+ ax25_calculate_rtt(ax25);
+ ax25_stop_t1timer(ax25);
+ ax25_start_t3timer(ax25);
+ return 1;
+ } else {
+ if (ax25->va != nr) {
+ ax25_frames_acked(ax25, nr);
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+ return 1;
+ }
+ }
+ return 0;
+}
+
diff --git a/net/ax25/ax25_route.c b/net/ax25/ax25_route.c
new file mode 100644
index 0000000..44b99b1f
--- /dev/null
+++ b/net/ax25/ax25_route.c
@@ -0,0 +1,534 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Steven Whitehouse GW7RRM (stevew@acm.org)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Hans-Joachim Hetscher DD8NE (dd8ne@bnv-bamberg.de)
+ * Copyright (C) Frederic Rible F1OAT (frible@teaser.fr)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/timer.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+
+static ax25_route *ax25_route_list;
+static DEFINE_RWLOCK(ax25_route_lock);
+
+static ax25_route *ax25_get_route(ax25_address *, struct net_device *);
+
+void ax25_rt_device_down(struct net_device *dev)
+{
+ ax25_route *s, *t, *ax25_rt;
+
+ write_lock(&ax25_route_lock);
+ ax25_rt = ax25_route_list;
+ while (ax25_rt != NULL) {
+ s = ax25_rt;
+ ax25_rt = ax25_rt->next;
+
+ if (s->dev == dev) {
+ if (ax25_route_list == s) {
+ ax25_route_list = s->next;
+ if (s->digipeat != NULL)
+ kfree(s->digipeat);
+ kfree(s);
+ } else {
+ for (t = ax25_route_list; t != NULL; t = t->next) {
+ if (t->next == s) {
+ t->next = s->next;
+ if (s->digipeat != NULL)
+ kfree(s->digipeat);
+ kfree(s);
+ break;
+ }
+ }
+ }
+ }
+ }
+ write_unlock(&ax25_route_lock);
+}
+
+static int ax25_rt_add(struct ax25_routes_struct *route)
+{
+ ax25_route *ax25_rt;
+ ax25_dev *ax25_dev;
+ int i;
+
+ if ((ax25_dev = ax25_addr_ax25dev(&route->port_addr)) == NULL)
+ return -EINVAL;
+ if (route->digi_count > AX25_MAX_DIGIS)
+ return -EINVAL;
+
+ write_lock(&ax25_route_lock);
+
+ ax25_rt = ax25_route_list;
+ while (ax25_rt != NULL) {
+ if (ax25cmp(&ax25_rt->callsign, &route->dest_addr) == 0 &&
+ ax25_rt->dev == ax25_dev->dev) {
+ if (ax25_rt->digipeat != NULL) {
+ kfree(ax25_rt->digipeat);
+ ax25_rt->digipeat = NULL;
+ }
+ if (route->digi_count != 0) {
+ if ((ax25_rt->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
+ write_unlock(&ax25_route_lock);
+ return -ENOMEM;
+ }
+ ax25_rt->digipeat->lastrepeat = -1;
+ ax25_rt->digipeat->ndigi = route->digi_count;
+ for (i = 0; i < route->digi_count; i++) {
+ ax25_rt->digipeat->repeated[i] = 0;
+ ax25_rt->digipeat->calls[i] = route->digi_addr[i];
+ }
+ }
+ write_unlock(&ax25_route_lock);
+ return 0;
+ }
+ ax25_rt = ax25_rt->next;
+ }
+
+ if ((ax25_rt = kmalloc(sizeof(ax25_route), GFP_ATOMIC)) == NULL) {
+ write_unlock(&ax25_route_lock);
+ return -ENOMEM;
+ }
+
+ atomic_set(&ax25_rt->ref, 0);
+ ax25_rt->callsign = route->dest_addr;
+ ax25_rt->dev = ax25_dev->dev;
+ ax25_rt->digipeat = NULL;
+ ax25_rt->ip_mode = ' ';
+ if (route->digi_count != 0) {
+ if ((ax25_rt->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
+ write_unlock(&ax25_route_lock);
+ kfree(ax25_rt);
+ return -ENOMEM;
+ }
+ ax25_rt->digipeat->lastrepeat = -1;
+ ax25_rt->digipeat->ndigi = route->digi_count;
+ for (i = 0; i < route->digi_count; i++) {
+ ax25_rt->digipeat->repeated[i] = 0;
+ ax25_rt->digipeat->calls[i] = route->digi_addr[i];
+ }
+ }
+ ax25_rt->next = ax25_route_list;
+ ax25_route_list = ax25_rt;
+ write_unlock(&ax25_route_lock);
+
+ return 0;
+}
+
+static void ax25_rt_destroy(ax25_route *ax25_rt)
+{
+ if (atomic_read(&ax25_rt->ref) == 0) {
+ if (ax25_rt->digipeat != NULL)
+ kfree(ax25_rt->digipeat);
+ kfree(ax25_rt);
+ return;
+ }
+
+ /*
+ * Uh... Route is still in use; we can't yet destroy it. Retry later.
+ */
+ init_timer(&ax25_rt->timer);
+ ax25_rt->timer.data = (unsigned long) ax25_rt;
+ ax25_rt->timer.function = (void *) ax25_rt_destroy;
+ ax25_rt->timer.expires = jiffies + 5 * HZ;
+
+ add_timer(&ax25_rt->timer);
+}
+
+static int ax25_rt_del(struct ax25_routes_struct *route)
+{
+ ax25_route *s, *t, *ax25_rt;
+ ax25_dev *ax25_dev;
+
+ if ((ax25_dev = ax25_addr_ax25dev(&route->port_addr)) == NULL)
+ return -EINVAL;
+
+ write_lock(&ax25_route_lock);
+
+ ax25_rt = ax25_route_list;
+ while (ax25_rt != NULL) {
+ s = ax25_rt;
+ ax25_rt = ax25_rt->next;
+ if (s->dev == ax25_dev->dev &&
+ ax25cmp(&route->dest_addr, &s->callsign) == 0) {
+ if (ax25_route_list == s) {
+ ax25_route_list = s->next;
+ ax25_rt_destroy(s);
+ } else {
+ for (t = ax25_route_list; t != NULL; t = t->next) {
+ if (t->next == s) {
+ t->next = s->next;
+ ax25_rt_destroy(s);
+ break;
+ }
+ }
+ }
+ }
+ }
+ write_unlock(&ax25_route_lock);
+
+ return 0;
+}
+
+static int ax25_rt_opt(struct ax25_route_opt_struct *rt_option)
+{
+ ax25_route *ax25_rt;
+ ax25_dev *ax25_dev;
+ int err = 0;
+
+ if ((ax25_dev = ax25_addr_ax25dev(&rt_option->port_addr)) == NULL)
+ return -EINVAL;
+
+ write_lock(&ax25_route_lock);
+
+ ax25_rt = ax25_route_list;
+ while (ax25_rt != NULL) {
+ if (ax25_rt->dev == ax25_dev->dev &&
+ ax25cmp(&rt_option->dest_addr, &ax25_rt->callsign) == 0) {
+ switch (rt_option->cmd) {
+ case AX25_SET_RT_IPMODE:
+ switch (rt_option->arg) {
+ case ' ':
+ case 'D':
+ case 'V':
+ ax25_rt->ip_mode = rt_option->arg;
+ break;
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ break;
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ }
+ ax25_rt = ax25_rt->next;
+ }
+
+out:
+ write_unlock(&ax25_route_lock);
+ return err;
+}
+
+int ax25_rt_ioctl(unsigned int cmd, void __user *arg)
+{
+ struct ax25_route_opt_struct rt_option;
+ struct ax25_routes_struct route;
+
+ switch (cmd) {
+ case SIOCADDRT:
+ if (copy_from_user(&route, arg, sizeof(route)))
+ return -EFAULT;
+ return ax25_rt_add(&route);
+
+ case SIOCDELRT:
+ if (copy_from_user(&route, arg, sizeof(route)))
+ return -EFAULT;
+ return ax25_rt_del(&route);
+
+ case SIOCAX25OPTRT:
+ if (copy_from_user(&rt_option, arg, sizeof(rt_option)))
+ return -EFAULT;
+ return ax25_rt_opt(&rt_option);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+#ifdef CONFIG_PROC_FS
+
+static void *ax25_rt_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct ax25_route *ax25_rt;
+ int i = 1;
+
+ read_lock(&ax25_route_lock);
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
+ for (ax25_rt = ax25_route_list; ax25_rt != NULL; ax25_rt = ax25_rt->next) {
+ if (i == *pos)
+ return ax25_rt;
+ ++i;
+ }
+
+ return NULL;
+}
+
+static void *ax25_rt_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+ return (v == SEQ_START_TOKEN) ? ax25_route_list :
+ ((struct ax25_route *) v)->next;
+}
+
+static void ax25_rt_seq_stop(struct seq_file *seq, void *v)
+{
+ read_unlock(&ax25_route_lock);
+}
+
+static int ax25_rt_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_puts(seq, "callsign dev mode digipeaters\n");
+ else {
+ struct ax25_route *ax25_rt = v;
+ const char *callsign;
+ int i;
+
+ if (ax25cmp(&ax25_rt->callsign, &null_ax25_address) == 0)
+ callsign = "default";
+ else
+ callsign = ax2asc(&ax25_rt->callsign);
+
+ seq_printf(seq, "%-9s %-4s",
+ callsign,
+ ax25_rt->dev ? ax25_rt->dev->name : "???");
+
+ switch (ax25_rt->ip_mode) {
+ case 'V':
+ seq_puts(seq, " vc");
+ break;
+ case 'D':
+ seq_puts(seq, " dg");
+ break;
+ default:
+ seq_puts(seq, " *");
+ break;
+ }
+
+ if (ax25_rt->digipeat != NULL)
+ for (i = 0; i < ax25_rt->digipeat->ndigi; i++)
+ seq_printf(seq, " %s", ax2asc(&ax25_rt->digipeat->calls[i]));
+
+ seq_puts(seq, "\n");
+ }
+ return 0;
+}
+
+static struct seq_operations ax25_rt_seqops = {
+ .start = ax25_rt_seq_start,
+ .next = ax25_rt_seq_next,
+ .stop = ax25_rt_seq_stop,
+ .show = ax25_rt_seq_show,
+};
+
+static int ax25_rt_info_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &ax25_rt_seqops);
+}
+
+struct file_operations ax25_route_fops = {
+ .owner = THIS_MODULE,
+ .open = ax25_rt_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+#endif
+
+/*
+ * Find AX.25 route
+ *
+ * Only routes with a refernce rout of zero can be destroyed.
+ */
+static ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
+{
+ ax25_route *ax25_spe_rt = NULL;
+ ax25_route *ax25_def_rt = NULL;
+ ax25_route *ax25_rt;
+
+ read_lock(&ax25_route_lock);
+ /*
+ * Bind to the physical interface we heard them on, or the default
+ * route if none is found;
+ */
+ for (ax25_rt = ax25_route_list; ax25_rt != NULL; ax25_rt = ax25_rt->next) {
+ if (dev == NULL) {
+ if (ax25cmp(&ax25_rt->callsign, addr) == 0 && ax25_rt->dev != NULL)
+ ax25_spe_rt = ax25_rt;
+ if (ax25cmp(&ax25_rt->callsign, &null_ax25_address) == 0 && ax25_rt->dev != NULL)
+ ax25_def_rt = ax25_rt;
+ } else {
+ if (ax25cmp(&ax25_rt->callsign, addr) == 0 && ax25_rt->dev == dev)
+ ax25_spe_rt = ax25_rt;
+ if (ax25cmp(&ax25_rt->callsign, &null_ax25_address) == 0 && ax25_rt->dev == dev)
+ ax25_def_rt = ax25_rt;
+ }
+ }
+
+ ax25_rt = ax25_def_rt;
+ if (ax25_spe_rt != NULL)
+ ax25_rt = ax25_spe_rt;
+
+ if (ax25_rt != NULL)
+ atomic_inc(&ax25_rt->ref);
+
+ read_unlock(&ax25_route_lock);
+
+ return ax25_rt;
+}
+
+/*
+ * Adjust path: If you specify a default route and want to connect
+ * a target on the digipeater path but w/o having a special route
+ * set before, the path has to be truncated from your target on.
+ */
+static inline void ax25_adjust_path(ax25_address *addr, ax25_digi *digipeat)
+{
+ int k;
+
+ for (k = 0; k < digipeat->ndigi; k++) {
+ if (ax25cmp(addr, &digipeat->calls[k]) == 0)
+ break;
+ }
+
+ digipeat->ndigi = k;
+}
+
+
+/*
+ * Find which interface to use.
+ */
+int ax25_rt_autobind(ax25_cb *ax25, ax25_address *addr)
+{
+ ax25_route *ax25_rt;
+ ax25_address *call;
+ int err;
+
+ if ((ax25_rt = ax25_get_route(addr, NULL)) == NULL)
+ return -EHOSTUNREACH;
+
+ if ((ax25->ax25_dev = ax25_dev_ax25dev(ax25_rt->dev)) == NULL) {
+ err = -EHOSTUNREACH;
+ goto put;
+ }
+
+ if ((call = ax25_findbyuid(current->euid)) == NULL) {
+ if (ax25_uid_policy && !capable(CAP_NET_BIND_SERVICE)) {
+ err = -EPERM;
+ goto put;
+ }
+ call = (ax25_address *)ax25->ax25_dev->dev->dev_addr;
+ }
+
+ ax25->source_addr = *call;
+
+ if (ax25_rt->digipeat != NULL) {
+ if ((ax25->digipeat = kmalloc(sizeof(ax25_digi), GFP_ATOMIC)) == NULL) {
+ err = -ENOMEM;
+ goto put;
+ }
+ memcpy(ax25->digipeat, ax25_rt->digipeat, sizeof(ax25_digi));
+ ax25_adjust_path(addr, ax25->digipeat);
+ }
+
+ if (ax25->sk != NULL) {
+ bh_lock_sock(ax25->sk);
+ sock_reset_flag(ax25->sk, SOCK_ZAPPED);
+ bh_unlock_sock(ax25->sk);
+ }
+
+put:
+ ax25_put_route(ax25_rt);
+
+ return 0;
+}
+
+ax25_route *ax25_rt_find_route(ax25_route * route, ax25_address *addr,
+ struct net_device *dev)
+{
+ ax25_route *ax25_rt;
+
+ if ((ax25_rt = ax25_get_route(addr, dev)))
+ return ax25_rt;
+
+ route->next = NULL;
+ atomic_set(&route->ref, 1);
+ route->callsign = *addr;
+ route->dev = dev;
+ route->digipeat = NULL;
+ route->ip_mode = ' ';
+
+ return route;
+}
+
+struct sk_buff *ax25_rt_build_path(struct sk_buff *skb, ax25_address *src,
+ ax25_address *dest, ax25_digi *digi)
+{
+ struct sk_buff *skbn;
+ unsigned char *bp;
+ int len;
+
+ len = digi->ndigi * AX25_ADDR_LEN;
+
+ if (skb_headroom(skb) < len) {
+ if ((skbn = skb_realloc_headroom(skb, len)) == NULL) {
+ printk(KERN_CRIT "AX.25: ax25_dg_build_path - out of memory\n");
+ return NULL;
+ }
+
+ if (skb->sk != NULL)
+ skb_set_owner_w(skbn, skb->sk);
+
+ kfree_skb(skb);
+
+ skb = skbn;
+ }
+
+ bp = skb_push(skb, len);
+
+ ax25_addr_build(bp, src, dest, digi, AX25_COMMAND, AX25_MODULUS);
+
+ return skb;
+}
+
+/*
+ * Free all memory associated with routing structures.
+ */
+void __exit ax25_rt_free(void)
+{
+ ax25_route *s, *ax25_rt = ax25_route_list;
+
+ write_lock(&ax25_route_lock);
+ while (ax25_rt != NULL) {
+ s = ax25_rt;
+ ax25_rt = ax25_rt->next;
+
+ if (s->digipeat != NULL)
+ kfree(s->digipeat);
+
+ kfree(s);
+ }
+ write_unlock(&ax25_route_lock);
+}
diff --git a/net/ax25/ax25_std_in.c b/net/ax25/ax25_std_in.c
new file mode 100644
index 0000000..7131873
--- /dev/null
+++ b/net/ax25/ax25_std_in.c
@@ -0,0 +1,449 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Hans-Joachim Hetscher DD8NE (dd8ne@bnv-bamberg.de)
+ *
+ * Most of this code is based on the SDL diagrams published in the 7th ARRL
+ * Computer Networking Conference papers. The diagrams have mistakes in them,
+ * but are mostly correct. Before you modify the code could you read the SDL
+ * diagrams as the code is not obvious and probably very easy to break.
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <net/ip.h> /* For ip_rcv */
+#include <net/tcp.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+/*
+ * State machine for state 1, Awaiting Connection State.
+ * The handling of the timer(s) is in file ax25_std_timer.c.
+ * Handling of state 0 and connection release is in ax25.c.
+ */
+static int ax25_std_state1_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int pf, int type)
+{
+ switch (frametype) {
+ case AX25_SABM:
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ break;
+
+ case AX25_SABME:
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ break;
+
+ case AX25_DISC:
+ ax25_send_control(ax25, AX25_DM, pf, AX25_RESPONSE);
+ break;
+
+ case AX25_UA:
+ if (pf) {
+ ax25_calculate_rtt(ax25);
+ ax25_stop_t1timer(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_start_idletimer(ax25);
+ ax25->vs = 0;
+ ax25->va = 0;
+ ax25->vr = 0;
+ ax25->state = AX25_STATE_3;
+ ax25->n2count = 0;
+ if (ax25->sk != NULL) {
+ bh_lock_sock(ax25->sk);
+ ax25->sk->sk_state = TCP_ESTABLISHED;
+ /* For WAIT_SABM connections we will produce an accept ready socket here */
+ if (!sock_flag(ax25->sk, SOCK_DEAD))
+ ax25->sk->sk_state_change(ax25->sk);
+ bh_unlock_sock(ax25->sk);
+ }
+ }
+ break;
+
+ case AX25_DM:
+ if (pf) {
+ if (ax25->modulus == AX25_MODULUS) {
+ ax25_disconnect(ax25, ECONNREFUSED);
+ } else {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * State machine for state 2, Awaiting Release State.
+ * The handling of the timer(s) is in file ax25_std_timer.c
+ * Handling of state 0 and connection release is in ax25.c.
+ */
+static int ax25_std_state2_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int pf, int type)
+{
+ switch (frametype) {
+ case AX25_SABM:
+ case AX25_SABME:
+ ax25_send_control(ax25, AX25_DM, pf, AX25_RESPONSE);
+ break;
+
+ case AX25_DISC:
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_disconnect(ax25, 0);
+ break;
+
+ case AX25_DM:
+ case AX25_UA:
+ if (pf)
+ ax25_disconnect(ax25, 0);
+ break;
+
+ case AX25_I:
+ case AX25_REJ:
+ case AX25_RNR:
+ case AX25_RR:
+ if (pf) ax25_send_control(ax25, AX25_DM, AX25_POLLON, AX25_RESPONSE);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * State machine for state 3, Connected State.
+ * The handling of the timer(s) is in file ax25_std_timer.c
+ * Handling of state 0 and connection release is in ax25.c.
+ */
+static int ax25_std_state3_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int ns, int nr, int pf, int type)
+{
+ int queued = 0;
+
+ switch (frametype) {
+ case AX25_SABM:
+ case AX25_SABME:
+ if (frametype == AX25_SABM) {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ } else {
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
+ }
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_stop_t1timer(ax25);
+ ax25_stop_t2timer(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_start_idletimer(ax25);
+ ax25->condition = 0x00;
+ ax25->vs = 0;
+ ax25->va = 0;
+ ax25->vr = 0;
+ ax25_requeue_frames(ax25);
+ break;
+
+ case AX25_DISC:
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_disconnect(ax25, 0);
+ break;
+
+ case AX25_DM:
+ ax25_disconnect(ax25, ECONNRESET);
+ break;
+
+ case AX25_RR:
+ case AX25_RNR:
+ if (frametype == AX25_RR)
+ ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
+ else
+ ax25->condition |= AX25_COND_PEER_RX_BUSY;
+ if (type == AX25_COMMAND && pf)
+ ax25_std_enquiry_response(ax25);
+ if (ax25_validate_nr(ax25, nr)) {
+ ax25_check_iframes_acked(ax25, nr);
+ } else {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+
+ case AX25_REJ:
+ ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
+ if (type == AX25_COMMAND && pf)
+ ax25_std_enquiry_response(ax25);
+ if (ax25_validate_nr(ax25, nr)) {
+ ax25_frames_acked(ax25, nr);
+ ax25_calculate_rtt(ax25);
+ ax25_stop_t1timer(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_requeue_frames(ax25);
+ } else {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+
+ case AX25_I:
+ if (!ax25_validate_nr(ax25, nr)) {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ break;
+ }
+ if (ax25->condition & AX25_COND_PEER_RX_BUSY) {
+ ax25_frames_acked(ax25, nr);
+ } else {
+ ax25_check_iframes_acked(ax25, nr);
+ }
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY) {
+ if (pf) ax25_std_enquiry_response(ax25);
+ break;
+ }
+ if (ns == ax25->vr) {
+ ax25->vr = (ax25->vr + 1) % ax25->modulus;
+ queued = ax25_rx_iframe(ax25, skb);
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY)
+ ax25->vr = ns; /* ax25->vr - 1 */
+ ax25->condition &= ~AX25_COND_REJECT;
+ if (pf) {
+ ax25_std_enquiry_response(ax25);
+ } else {
+ if (!(ax25->condition & AX25_COND_ACK_PENDING)) {
+ ax25->condition |= AX25_COND_ACK_PENDING;
+ ax25_start_t2timer(ax25);
+ }
+ }
+ } else {
+ if (ax25->condition & AX25_COND_REJECT) {
+ if (pf) ax25_std_enquiry_response(ax25);
+ } else {
+ ax25->condition |= AX25_COND_REJECT;
+ ax25_send_control(ax25, AX25_REJ, pf, AX25_RESPONSE);
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+ }
+ }
+ break;
+
+ case AX25_FRMR:
+ case AX25_ILLEGAL:
+ ax25_std_establish_data_link(ax25);
+ ax25->state = AX25_STATE_1;
+ break;
+
+ default:
+ break;
+ }
+
+ return queued;
+}
+
+/*
+ * State machine for state 4, Timer Recovery State.
+ * The handling of the timer(s) is in file ax25_std_timer.c
+ * Handling of state 0 and connection release is in ax25.c.
+ */
+static int ax25_std_state4_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int ns, int nr, int pf, int type)
+{
+ int queued = 0;
+
+ switch (frametype) {
+ case AX25_SABM:
+ case AX25_SABME:
+ if (frametype == AX25_SABM) {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ } else {
+ ax25->modulus = AX25_EMODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
+ }
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_stop_t1timer(ax25);
+ ax25_stop_t2timer(ax25);
+ ax25_start_t3timer(ax25);
+ ax25_start_idletimer(ax25);
+ ax25->condition = 0x00;
+ ax25->vs = 0;
+ ax25->va = 0;
+ ax25->vr = 0;
+ ax25->state = AX25_STATE_3;
+ ax25->n2count = 0;
+ ax25_requeue_frames(ax25);
+ break;
+
+ case AX25_DISC:
+ ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
+ ax25_disconnect(ax25, 0);
+ break;
+
+ case AX25_DM:
+ ax25_disconnect(ax25, ECONNRESET);
+ break;
+
+ case AX25_RR:
+ case AX25_RNR:
+ if (frametype == AX25_RR)
+ ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
+ else
+ ax25->condition |= AX25_COND_PEER_RX_BUSY;
+ if (type == AX25_RESPONSE && pf) {
+ ax25_stop_t1timer(ax25);
+ ax25->n2count = 0;
+ if (ax25_validate_nr(ax25, nr)) {
+ ax25_frames_acked(ax25, nr);
+ if (ax25->vs == ax25->va) {
+ ax25_start_t3timer(ax25);
+ ax25->state = AX25_STATE_3;
+ } else {
+ ax25_requeue_frames(ax25);
+ }
+ } else {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+ }
+ if (type == AX25_COMMAND && pf)
+ ax25_std_enquiry_response(ax25);
+ if (ax25_validate_nr(ax25, nr)) {
+ ax25_frames_acked(ax25, nr);
+ } else {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+
+ case AX25_REJ:
+ ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
+ if (pf && type == AX25_RESPONSE) {
+ ax25_stop_t1timer(ax25);
+ ax25->n2count = 0;
+ if (ax25_validate_nr(ax25, nr)) {
+ ax25_frames_acked(ax25, nr);
+ if (ax25->vs == ax25->va) {
+ ax25_start_t3timer(ax25);
+ ax25->state = AX25_STATE_3;
+ } else {
+ ax25_requeue_frames(ax25);
+ }
+ } else {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+ }
+ if (type == AX25_COMMAND && pf)
+ ax25_std_enquiry_response(ax25);
+ if (ax25_validate_nr(ax25, nr)) {
+ ax25_frames_acked(ax25, nr);
+ ax25_requeue_frames(ax25);
+ } else {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ }
+ break;
+
+ case AX25_I:
+ if (!ax25_validate_nr(ax25, nr)) {
+ ax25_std_nr_error_recovery(ax25);
+ ax25->state = AX25_STATE_1;
+ break;
+ }
+ ax25_frames_acked(ax25, nr);
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY) {
+ if (pf)
+ ax25_std_enquiry_response(ax25);
+ break;
+ }
+ if (ns == ax25->vr) {
+ ax25->vr = (ax25->vr + 1) % ax25->modulus;
+ queued = ax25_rx_iframe(ax25, skb);
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY)
+ ax25->vr = ns; /* ax25->vr - 1 */
+ ax25->condition &= ~AX25_COND_REJECT;
+ if (pf) {
+ ax25_std_enquiry_response(ax25);
+ } else {
+ if (!(ax25->condition & AX25_COND_ACK_PENDING)) {
+ ax25->condition |= AX25_COND_ACK_PENDING;
+ ax25_start_t2timer(ax25);
+ }
+ }
+ } else {
+ if (ax25->condition & AX25_COND_REJECT) {
+ if (pf) ax25_std_enquiry_response(ax25);
+ } else {
+ ax25->condition |= AX25_COND_REJECT;
+ ax25_send_control(ax25, AX25_REJ, pf, AX25_RESPONSE);
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+ }
+ }
+ break;
+
+ case AX25_FRMR:
+ case AX25_ILLEGAL:
+ ax25_std_establish_data_link(ax25);
+ ax25->state = AX25_STATE_1;
+ break;
+
+ default:
+ break;
+ }
+
+ return queued;
+}
+
+/*
+ * Higher level upcall for a LAPB frame
+ */
+int ax25_std_frame_in(ax25_cb *ax25, struct sk_buff *skb, int type)
+{
+ int queued = 0, frametype, ns, nr, pf;
+
+ frametype = ax25_decode(ax25, skb, &ns, &nr, &pf);
+
+ switch (ax25->state) {
+ case AX25_STATE_1:
+ queued = ax25_std_state1_machine(ax25, skb, frametype, pf, type);
+ break;
+ case AX25_STATE_2:
+ queued = ax25_std_state2_machine(ax25, skb, frametype, pf, type);
+ break;
+ case AX25_STATE_3:
+ queued = ax25_std_state3_machine(ax25, skb, frametype, ns, nr, pf, type);
+ break;
+ case AX25_STATE_4:
+ queued = ax25_std_state4_machine(ax25, skb, frametype, ns, nr, pf, type);
+ break;
+ }
+
+ ax25_kick(ax25);
+
+ return queued;
+}
diff --git a/net/ax25/ax25_std_subr.c b/net/ax25/ax25_std_subr.c
new file mode 100644
index 0000000..2b3c801
--- /dev/null
+++ b/net/ax25/ax25_std_subr.c
@@ -0,0 +1,88 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+/*
+ * The following routines are taken from page 170 of the 7th ARRL Computer
+ * Networking Conference paper, as is the whole state machine.
+ */
+
+void ax25_std_nr_error_recovery(ax25_cb *ax25)
+{
+ ax25_std_establish_data_link(ax25);
+}
+
+void ax25_std_establish_data_link(ax25_cb *ax25)
+{
+ ax25->condition = 0x00;
+ ax25->n2count = 0;
+
+ if (ax25->modulus == AX25_MODULUS)
+ ax25_send_control(ax25, AX25_SABM, AX25_POLLON, AX25_COMMAND);
+ else
+ ax25_send_control(ax25, AX25_SABME, AX25_POLLON, AX25_COMMAND);
+
+ ax25_calculate_t1(ax25);
+ ax25_stop_idletimer(ax25);
+ ax25_stop_t3timer(ax25);
+ ax25_stop_t2timer(ax25);
+ ax25_start_t1timer(ax25);
+}
+
+void ax25_std_transmit_enquiry(ax25_cb *ax25)
+{
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY)
+ ax25_send_control(ax25, AX25_RNR, AX25_POLLON, AX25_COMMAND);
+ else
+ ax25_send_control(ax25, AX25_RR, AX25_POLLON, AX25_COMMAND);
+
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+}
+
+void ax25_std_enquiry_response(ax25_cb *ax25)
+{
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY)
+ ax25_send_control(ax25, AX25_RNR, AX25_POLLON, AX25_RESPONSE);
+ else
+ ax25_send_control(ax25, AX25_RR, AX25_POLLON, AX25_RESPONSE);
+
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+}
+
+void ax25_std_timeout_response(ax25_cb *ax25)
+{
+ if (ax25->condition & AX25_COND_OWN_RX_BUSY)
+ ax25_send_control(ax25, AX25_RNR, AX25_POLLOFF, AX25_RESPONSE);
+ else
+ ax25_send_control(ax25, AX25_RR, AX25_POLLOFF, AX25_RESPONSE);
+
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+}
diff --git a/net/ax25/ax25_std_timer.c b/net/ax25/ax25_std_timer.c
new file mode 100644
index 0000000..066897b
--- /dev/null
+++ b/net/ax25/ax25_std_timer.c
@@ -0,0 +1,177 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Frederic Rible F1OAT (frible@teaser.fr)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <net/tcp.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+void ax25_std_heartbeat_expiry(ax25_cb *ax25)
+{
+ struct sock *sk=ax25->sk;
+
+ if (sk)
+ bh_lock_sock(sk);
+
+ switch (ax25->state) {
+ case AX25_STATE_0:
+ /* Magic here: If we listen() and a new link dies before it
+ is accepted() it isn't 'dead' so doesn't get removed. */
+ if (!sk || sock_flag(sk, SOCK_DESTROY) ||
+ (sk->sk_state == TCP_LISTEN &&
+ sock_flag(sk, SOCK_DEAD))) {
+ if (sk) {
+ sock_hold(sk);
+ ax25_destroy_socket(ax25);
+ bh_unlock_sock(sk);
+ sock_put(sk);
+ } else
+ ax25_destroy_socket(ax25);
+ return;
+ }
+ break;
+
+ case AX25_STATE_3:
+ case AX25_STATE_4:
+ /*
+ * Check the state of the receive buffer.
+ */
+ if (sk != NULL) {
+ if (atomic_read(&sk->sk_rmem_alloc) <
+ (sk->sk_rcvbuf / 2) &&
+ (ax25->condition & AX25_COND_OWN_RX_BUSY)) {
+ ax25->condition &= ~AX25_COND_OWN_RX_BUSY;
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+ ax25_send_control(ax25, AX25_RR, AX25_POLLOFF, AX25_RESPONSE);
+ break;
+ }
+ }
+ }
+
+ if (sk)
+ bh_unlock_sock(sk);
+
+ ax25_start_heartbeat(ax25);
+}
+
+void ax25_std_t2timer_expiry(ax25_cb *ax25)
+{
+ if (ax25->condition & AX25_COND_ACK_PENDING) {
+ ax25->condition &= ~AX25_COND_ACK_PENDING;
+ ax25_std_timeout_response(ax25);
+ }
+}
+
+void ax25_std_t3timer_expiry(ax25_cb *ax25)
+{
+ ax25->n2count = 0;
+ ax25_std_transmit_enquiry(ax25);
+ ax25->state = AX25_STATE_4;
+}
+
+void ax25_std_idletimer_expiry(ax25_cb *ax25)
+{
+ ax25_clear_queues(ax25);
+
+ ax25->n2count = 0;
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ ax25->state = AX25_STATE_2;
+
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+ ax25_stop_t2timer(ax25);
+ ax25_stop_t3timer(ax25);
+
+ if (ax25->sk != NULL) {
+ bh_lock_sock(ax25->sk);
+ ax25->sk->sk_state = TCP_CLOSE;
+ ax25->sk->sk_err = 0;
+ ax25->sk->sk_shutdown |= SEND_SHUTDOWN;
+ if (!sock_flag(ax25->sk, SOCK_DEAD)) {
+ ax25->sk->sk_state_change(ax25->sk);
+ sock_set_flag(ax25->sk, SOCK_DEAD);
+ }
+ bh_unlock_sock(ax25->sk);
+ }
+}
+
+void ax25_std_t1timer_expiry(ax25_cb *ax25)
+{
+ switch (ax25->state) {
+ case AX25_STATE_1:
+ if (ax25->n2count == ax25->n2) {
+ if (ax25->modulus == AX25_MODULUS) {
+ ax25_disconnect(ax25, ETIMEDOUT);
+ return;
+ } else {
+ ax25->modulus = AX25_MODULUS;
+ ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
+ ax25->n2count = 0;
+ ax25_send_control(ax25, AX25_SABM, AX25_POLLON, AX25_COMMAND);
+ }
+ } else {
+ ax25->n2count++;
+ if (ax25->modulus == AX25_MODULUS)
+ ax25_send_control(ax25, AX25_SABM, AX25_POLLON, AX25_COMMAND);
+ else
+ ax25_send_control(ax25, AX25_SABME, AX25_POLLON, AX25_COMMAND);
+ }
+ break;
+
+ case AX25_STATE_2:
+ if (ax25->n2count == ax25->n2) {
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ ax25_disconnect(ax25, ETIMEDOUT);
+ return;
+ } else {
+ ax25->n2count++;
+ ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+ }
+ break;
+
+ case AX25_STATE_3:
+ ax25->n2count = 1;
+ ax25_std_transmit_enquiry(ax25);
+ ax25->state = AX25_STATE_4;
+ break;
+
+ case AX25_STATE_4:
+ if (ax25->n2count == ax25->n2) {
+ ax25_send_control(ax25, AX25_DM, AX25_POLLON, AX25_RESPONSE);
+ ax25_disconnect(ax25, ETIMEDOUT);
+ return;
+ } else {
+ ax25->n2count++;
+ ax25_std_transmit_enquiry(ax25);
+ }
+ break;
+ }
+
+ ax25_calculate_t1(ax25);
+ ax25_start_t1timer(ax25);
+}
diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c
new file mode 100644
index 0000000..8cf7270
--- /dev/null
+++ b/net/ax25/ax25_subr.c
@@ -0,0 +1,295 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Frederic Rible F1OAT (frible@teaser.fr)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <net/tcp.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+/*
+ * This routine purges all the queues of frames.
+ */
+void ax25_clear_queues(ax25_cb *ax25)
+{
+ skb_queue_purge(&ax25->write_queue);
+ skb_queue_purge(&ax25->ack_queue);
+ skb_queue_purge(&ax25->reseq_queue);
+ skb_queue_purge(&ax25->frag_queue);
+}
+
+/*
+ * This routine purges the input queue of those frames that have been
+ * acknowledged. This replaces the boxes labelled "V(a) <- N(r)" on the
+ * SDL diagram.
+ */
+void ax25_frames_acked(ax25_cb *ax25, unsigned short nr)
+{
+ struct sk_buff *skb;
+
+ /*
+ * Remove all the ack-ed frames from the ack queue.
+ */
+ if (ax25->va != nr) {
+ while (skb_peek(&ax25->ack_queue) != NULL && ax25->va != nr) {
+ skb = skb_dequeue(&ax25->ack_queue);
+ kfree_skb(skb);
+ ax25->va = (ax25->va + 1) % ax25->modulus;
+ }
+ }
+}
+
+void ax25_requeue_frames(ax25_cb *ax25)
+{
+ struct sk_buff *skb, *skb_prev = NULL;
+
+ /*
+ * Requeue all the un-ack-ed frames on the output queue to be picked
+ * up by ax25_kick called from the timer. This arrangement handles the
+ * possibility of an empty output queue.
+ */
+ while ((skb = skb_dequeue(&ax25->ack_queue)) != NULL) {
+ if (skb_prev == NULL)
+ skb_queue_head(&ax25->write_queue, skb);
+ else
+ skb_append(skb_prev, skb);
+ skb_prev = skb;
+ }
+}
+
+/*
+ * Validate that the value of nr is between va and vs. Return true or
+ * false for testing.
+ */
+int ax25_validate_nr(ax25_cb *ax25, unsigned short nr)
+{
+ unsigned short vc = ax25->va;
+
+ while (vc != ax25->vs) {
+ if (nr == vc) return 1;
+ vc = (vc + 1) % ax25->modulus;
+ }
+
+ if (nr == ax25->vs) return 1;
+
+ return 0;
+}
+
+/*
+ * This routine is the centralised routine for parsing the control
+ * information for the different frame formats.
+ */
+int ax25_decode(ax25_cb *ax25, struct sk_buff *skb, int *ns, int *nr, int *pf)
+{
+ unsigned char *frame;
+ int frametype = AX25_ILLEGAL;
+
+ frame = skb->data;
+ *ns = *nr = *pf = 0;
+
+ if (ax25->modulus == AX25_MODULUS) {
+ if ((frame[0] & AX25_S) == 0) {
+ frametype = AX25_I; /* I frame - carries NR/NS/PF */
+ *ns = (frame[0] >> 1) & 0x07;
+ *nr = (frame[0] >> 5) & 0x07;
+ *pf = frame[0] & AX25_PF;
+ } else if ((frame[0] & AX25_U) == 1) { /* S frame - take out PF/NR */
+ frametype = frame[0] & 0x0F;
+ *nr = (frame[0] >> 5) & 0x07;
+ *pf = frame[0] & AX25_PF;
+ } else if ((frame[0] & AX25_U) == 3) { /* U frame - take out PF */
+ frametype = frame[0] & ~AX25_PF;
+ *pf = frame[0] & AX25_PF;
+ }
+ skb_pull(skb, 1);
+ } else {
+ if ((frame[0] & AX25_S) == 0) {
+ frametype = AX25_I; /* I frame - carries NR/NS/PF */
+ *ns = (frame[0] >> 1) & 0x7F;
+ *nr = (frame[1] >> 1) & 0x7F;
+ *pf = frame[1] & AX25_EPF;
+ skb_pull(skb, 2);
+ } else if ((frame[0] & AX25_U) == 1) { /* S frame - take out PF/NR */
+ frametype = frame[0] & 0x0F;
+ *nr = (frame[1] >> 1) & 0x7F;
+ *pf = frame[1] & AX25_EPF;
+ skb_pull(skb, 2);
+ } else if ((frame[0] & AX25_U) == 3) { /* U frame - take out PF */
+ frametype = frame[0] & ~AX25_PF;
+ *pf = frame[0] & AX25_PF;
+ skb_pull(skb, 1);
+ }
+ }
+
+ return frametype;
+}
+
+/*
+ * This routine is called when the HDLC layer internally generates a
+ * command or response for the remote machine ( eg. RR, UA etc. ).
+ * Only supervisory or unnumbered frames are processed.
+ */
+void ax25_send_control(ax25_cb *ax25, int frametype, int poll_bit, int type)
+{
+ struct sk_buff *skb;
+ unsigned char *dptr;
+
+ if ((skb = alloc_skb(ax25->ax25_dev->dev->hard_header_len + 2, GFP_ATOMIC)) == NULL)
+ return;
+
+ skb_reserve(skb, ax25->ax25_dev->dev->hard_header_len);
+
+ skb->nh.raw = skb->data;
+
+ /* Assume a response - address structure for DTE */
+ if (ax25->modulus == AX25_MODULUS) {
+ dptr = skb_put(skb, 1);
+ *dptr = frametype;
+ *dptr |= (poll_bit) ? AX25_PF : 0;
+ if ((frametype & AX25_U) == AX25_S) /* S frames carry NR */
+ *dptr |= (ax25->vr << 5);
+ } else {
+ if ((frametype & AX25_U) == AX25_U) {
+ dptr = skb_put(skb, 1);
+ *dptr = frametype;
+ *dptr |= (poll_bit) ? AX25_PF : 0;
+ } else {
+ dptr = skb_put(skb, 2);
+ dptr[0] = frametype;
+ dptr[1] = (ax25->vr << 1);
+ dptr[1] |= (poll_bit) ? AX25_EPF : 0;
+ }
+ }
+
+ ax25_transmit_buffer(ax25, skb, type);
+}
+
+/*
+ * Send a 'DM' to an unknown connection attempt, or an invalid caller.
+ *
+ * Note: src here is the sender, thus it's the target of the DM
+ */
+void ax25_return_dm(struct net_device *dev, ax25_address *src, ax25_address *dest, ax25_digi *digi)
+{
+ struct sk_buff *skb;
+ char *dptr;
+ ax25_digi retdigi;
+
+ if (dev == NULL)
+ return;
+
+ if ((skb = alloc_skb(dev->hard_header_len + 1, GFP_ATOMIC)) == NULL)
+ return; /* Next SABM will get DM'd */
+
+ skb_reserve(skb, dev->hard_header_len);
+ skb->nh.raw = skb->data;
+
+ ax25_digi_invert(digi, &retdigi);
+
+ dptr = skb_put(skb, 1);
+
+ *dptr = AX25_DM | AX25_PF;
+
+ /*
+ * Do the address ourselves
+ */
+ dptr = skb_push(skb, ax25_addr_size(digi));
+ dptr += ax25_addr_build(dptr, dest, src, &retdigi, AX25_RESPONSE, AX25_MODULUS);
+
+ skb->dev = dev;
+
+ ax25_queue_xmit(skb);
+}
+
+/*
+ * Exponential backoff for AX.25
+ */
+void ax25_calculate_t1(ax25_cb *ax25)
+{
+ int n, t = 2;
+
+ switch (ax25->backoff) {
+ case 0:
+ break;
+
+ case 1:
+ t += 2 * ax25->n2count;
+ break;
+
+ case 2:
+ for (n = 0; n < ax25->n2count; n++)
+ t *= 2;
+ if (t > 8) t = 8;
+ break;
+ }
+
+ ax25->t1 = t * ax25->rtt;
+}
+
+/*
+ * Calculate the Round Trip Time
+ */
+void ax25_calculate_rtt(ax25_cb *ax25)
+{
+ if (ax25->backoff == 0)
+ return;
+
+ if (ax25_t1timer_running(ax25) && ax25->n2count == 0)
+ ax25->rtt = (9 * ax25->rtt + ax25->t1 - ax25_display_timer(&ax25->t1timer)) / 10;
+
+ if (ax25->rtt < AX25_T1CLAMPLO)
+ ax25->rtt = AX25_T1CLAMPLO;
+
+ if (ax25->rtt > AX25_T1CLAMPHI)
+ ax25->rtt = AX25_T1CLAMPHI;
+}
+
+void ax25_disconnect(ax25_cb *ax25, int reason)
+{
+ ax25_clear_queues(ax25);
+
+ ax25_stop_t1timer(ax25);
+ ax25_stop_t2timer(ax25);
+ ax25_stop_t3timer(ax25);
+ ax25_stop_idletimer(ax25);
+
+ ax25->state = AX25_STATE_0;
+
+ ax25_link_failed(ax25, reason);
+
+ if (ax25->sk != NULL) {
+ bh_lock_sock(ax25->sk);
+ ax25->sk->sk_state = TCP_CLOSE;
+ ax25->sk->sk_err = reason;
+ ax25->sk->sk_shutdown |= SEND_SHUTDOWN;
+ if (!sock_flag(ax25->sk, SOCK_DEAD)) {
+ ax25->sk->sk_state_change(ax25->sk);
+ sock_set_flag(ax25->sk, SOCK_DEAD);
+ }
+ bh_unlock_sock(ax25->sk);
+ }
+}
diff --git a/net/ax25/ax25_timer.c b/net/ax25/ax25_timer.c
new file mode 100644
index 0000000..7a6b50a
--- /dev/null
+++ b/net/ax25/ax25_timer.c
@@ -0,0 +1,243 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Tomi Manninen OH2BNS (oh2bns@sral.fi)
+ * Copyright (C) Darryl Miles G7LED (dlm@g7led.demon.co.uk)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Frederic Rible F1OAT (frible@teaser.fr)
+ * Copyright (C) 2002 Ralf Baechle DO1GRB (ralf@gnu.org)
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+static void ax25_heartbeat_expiry(unsigned long);
+static void ax25_t1timer_expiry(unsigned long);
+static void ax25_t2timer_expiry(unsigned long);
+static void ax25_t3timer_expiry(unsigned long);
+static void ax25_idletimer_expiry(unsigned long);
+
+void ax25_start_heartbeat(ax25_cb *ax25)
+{
+ del_timer(&ax25->timer);
+
+ ax25->timer.data = (unsigned long)ax25;
+ ax25->timer.function = &ax25_heartbeat_expiry;
+ ax25->timer.expires = jiffies + 5 * HZ;
+
+ add_timer(&ax25->timer);
+}
+
+void ax25_start_t1timer(ax25_cb *ax25)
+{
+ del_timer(&ax25->t1timer);
+
+ ax25->t1timer.data = (unsigned long)ax25;
+ ax25->t1timer.function = &ax25_t1timer_expiry;
+ ax25->t1timer.expires = jiffies + ax25->t1;
+
+ add_timer(&ax25->t1timer);
+}
+
+void ax25_start_t2timer(ax25_cb *ax25)
+{
+ del_timer(&ax25->t2timer);
+
+ ax25->t2timer.data = (unsigned long)ax25;
+ ax25->t2timer.function = &ax25_t2timer_expiry;
+ ax25->t2timer.expires = jiffies + ax25->t2;
+
+ add_timer(&ax25->t2timer);
+}
+
+void ax25_start_t3timer(ax25_cb *ax25)
+{
+ del_timer(&ax25->t3timer);
+
+ if (ax25->t3 > 0) {
+ ax25->t3timer.data = (unsigned long)ax25;
+ ax25->t3timer.function = &ax25_t3timer_expiry;
+ ax25->t3timer.expires = jiffies + ax25->t3;
+
+ add_timer(&ax25->t3timer);
+ }
+}
+
+void ax25_start_idletimer(ax25_cb *ax25)
+{
+ del_timer(&ax25->idletimer);
+
+ if (ax25->idle > 0) {
+ ax25->idletimer.data = (unsigned long)ax25;
+ ax25->idletimer.function = &ax25_idletimer_expiry;
+ ax25->idletimer.expires = jiffies + ax25->idle;
+
+ add_timer(&ax25->idletimer);
+ }
+}
+
+void ax25_stop_heartbeat(ax25_cb *ax25)
+{
+ del_timer(&ax25->timer);
+}
+
+void ax25_stop_t1timer(ax25_cb *ax25)
+{
+ del_timer(&ax25->t1timer);
+}
+
+void ax25_stop_t2timer(ax25_cb *ax25)
+{
+ del_timer(&ax25->t2timer);
+}
+
+void ax25_stop_t3timer(ax25_cb *ax25)
+{
+ del_timer(&ax25->t3timer);
+}
+
+void ax25_stop_idletimer(ax25_cb *ax25)
+{
+ del_timer(&ax25->idletimer);
+}
+
+int ax25_t1timer_running(ax25_cb *ax25)
+{
+ return timer_pending(&ax25->t1timer);
+}
+
+unsigned long ax25_display_timer(struct timer_list *timer)
+{
+ if (!timer_pending(timer))
+ return 0;
+
+ return timer->expires - jiffies;
+}
+
+static void ax25_heartbeat_expiry(unsigned long param)
+{
+ int proto = AX25_PROTO_STD_SIMPLEX;
+ ax25_cb *ax25 = (ax25_cb *)param;
+
+ if (ax25->ax25_dev)
+ proto = ax25->ax25_dev->values[AX25_VALUES_PROTOCOL];
+
+ switch (proto) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_std_heartbeat_expiry(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ if (ax25->ax25_dev->dama.slave)
+ ax25_ds_heartbeat_expiry(ax25);
+ else
+ ax25_std_heartbeat_expiry(ax25);
+ break;
+#endif
+ }
+}
+
+static void ax25_t1timer_expiry(unsigned long param)
+{
+ ax25_cb *ax25 = (ax25_cb *)param;
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_std_t1timer_expiry(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ if (!ax25->ax25_dev->dama.slave)
+ ax25_std_t1timer_expiry(ax25);
+ break;
+#endif
+ }
+}
+
+static void ax25_t2timer_expiry(unsigned long param)
+{
+ ax25_cb *ax25 = (ax25_cb *)param;
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_std_t2timer_expiry(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ if (!ax25->ax25_dev->dama.slave)
+ ax25_std_t2timer_expiry(ax25);
+ break;
+#endif
+ }
+}
+
+static void ax25_t3timer_expiry(unsigned long param)
+{
+ ax25_cb *ax25 = (ax25_cb *)param;
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_std_t3timer_expiry(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ if (ax25->ax25_dev->dama.slave)
+ ax25_ds_t3timer_expiry(ax25);
+ else
+ ax25_std_t3timer_expiry(ax25);
+ break;
+#endif
+ }
+}
+
+static void ax25_idletimer_expiry(unsigned long param)
+{
+ ax25_cb *ax25 = (ax25_cb *)param;
+
+ switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
+ case AX25_PROTO_STD_SIMPLEX:
+ case AX25_PROTO_STD_DUPLEX:
+ ax25_std_idletimer_expiry(ax25);
+ break;
+
+#ifdef CONFIG_AX25_DAMA_SLAVE
+ case AX25_PROTO_DAMA_SLAVE:
+ if (ax25->ax25_dev->dama.slave)
+ ax25_ds_idletimer_expiry(ax25);
+ else
+ ax25_std_idletimer_expiry(ax25);
+ break;
+#endif
+ }
+}
diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c
new file mode 100644
index 0000000..cea6b7d
--- /dev/null
+++ b/net/ax25/ax25_uid.c
@@ -0,0 +1,228 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <linux/spinlock.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/stat.h>
+#include <linux/netfilter.h>
+#include <linux/sysctl.h>
+#include <net/ip.h>
+#include <net/arp.h>
+
+/*
+ * Callsign/UID mapper. This is in kernel space for security on multi-amateur machines.
+ */
+
+static ax25_uid_assoc *ax25_uid_list;
+static DEFINE_RWLOCK(ax25_uid_lock);
+
+int ax25_uid_policy = 0;
+
+ax25_address *ax25_findbyuid(uid_t uid)
+{
+ ax25_uid_assoc *ax25_uid;
+ ax25_address *res = NULL;
+
+ read_lock(&ax25_uid_lock);
+ for (ax25_uid = ax25_uid_list; ax25_uid != NULL; ax25_uid = ax25_uid->next) {
+ if (ax25_uid->uid == uid) {
+ res = &ax25_uid->call;
+ break;
+ }
+ }
+ read_unlock(&ax25_uid_lock);
+
+ return NULL;
+}
+
+int ax25_uid_ioctl(int cmd, struct sockaddr_ax25 *sax)
+{
+ ax25_uid_assoc *s, *ax25_uid;
+ unsigned long res;
+
+ switch (cmd) {
+ case SIOCAX25GETUID:
+ res = -ENOENT;
+ read_lock(&ax25_uid_lock);
+ for (ax25_uid = ax25_uid_list; ax25_uid != NULL; ax25_uid = ax25_uid->next) {
+ if (ax25cmp(&sax->sax25_call, &ax25_uid->call) == 0) {
+ res = ax25_uid->uid;
+ break;
+ }
+ }
+ read_unlock(&ax25_uid_lock);
+
+ return res;
+
+ case SIOCAX25ADDUID:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (ax25_findbyuid(sax->sax25_uid))
+ return -EEXIST;
+ if (sax->sax25_uid == 0)
+ return -EINVAL;
+ if ((ax25_uid = kmalloc(sizeof(*ax25_uid), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ ax25_uid->uid = sax->sax25_uid;
+ ax25_uid->call = sax->sax25_call;
+
+ write_lock(&ax25_uid_lock);
+ ax25_uid->next = ax25_uid_list;
+ ax25_uid_list = ax25_uid;
+ write_unlock(&ax25_uid_lock);
+
+ return 0;
+
+ case SIOCAX25DELUID:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ write_lock(&ax25_uid_lock);
+ for (ax25_uid = ax25_uid_list; ax25_uid != NULL; ax25_uid = ax25_uid->next) {
+ if (ax25cmp(&sax->sax25_call, &ax25_uid->call) == 0) {
+ break;
+ }
+ }
+ if (ax25_uid == NULL) {
+ write_unlock(&ax25_uid_lock);
+ return -ENOENT;
+ }
+ if ((s = ax25_uid_list) == ax25_uid) {
+ ax25_uid_list = s->next;
+ write_unlock(&ax25_uid_lock);
+ kfree(ax25_uid);
+ return 0;
+ }
+ while (s != NULL && s->next != NULL) {
+ if (s->next == ax25_uid) {
+ s->next = ax25_uid->next;
+ write_unlock(&ax25_uid_lock);
+ kfree(ax25_uid);
+ return 0;
+ }
+ s = s->next;
+ }
+ write_unlock(&ax25_uid_lock);
+
+ return -ENOENT;
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL; /*NOTREACHED */
+}
+
+#ifdef CONFIG_PROC_FS
+
+static void *ax25_uid_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct ax25_uid_assoc *pt;
+ int i = 1;
+
+ read_lock(&ax25_uid_lock);
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
+ for (pt = ax25_uid_list; pt != NULL; pt = pt->next) {
+ if (i == *pos)
+ return pt;
+ ++i;
+ }
+ return NULL;
+}
+
+static void *ax25_uid_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+ return (v == SEQ_START_TOKEN) ? ax25_uid_list :
+ ((struct ax25_uid_assoc *) v)->next;
+}
+
+static void ax25_uid_seq_stop(struct seq_file *seq, void *v)
+{
+ read_unlock(&ax25_uid_lock);
+}
+
+static int ax25_uid_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_printf(seq, "Policy: %d\n", ax25_uid_policy);
+ else {
+ struct ax25_uid_assoc *pt = v;
+
+
+ seq_printf(seq, "%6d %s\n", pt->uid, ax2asc(&pt->call));
+ }
+ return 0;
+}
+
+static struct seq_operations ax25_uid_seqops = {
+ .start = ax25_uid_seq_start,
+ .next = ax25_uid_seq_next,
+ .stop = ax25_uid_seq_stop,
+ .show = ax25_uid_seq_show,
+};
+
+static int ax25_uid_info_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &ax25_uid_seqops);
+}
+
+struct file_operations ax25_uid_fops = {
+ .owner = THIS_MODULE,
+ .open = ax25_uid_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+#endif
+
+/*
+ * Free all memory associated with UID/Callsign structures.
+ */
+void __exit ax25_uid_free(void)
+{
+ ax25_uid_assoc *s, *ax25_uid;
+
+ write_lock(&ax25_uid_lock);
+ ax25_uid = ax25_uid_list;
+ while (ax25_uid != NULL) {
+ s = ax25_uid;
+ ax25_uid = ax25_uid->next;
+
+ kfree(s);
+ }
+ ax25_uid_list = NULL;
+ write_unlock(&ax25_uid_lock);
+}
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
new file mode 100644
index 0000000..f67711f
--- /dev/null
+++ b/net/ax25/sysctl_net_ax25.c
@@ -0,0 +1,262 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) 1996 Mike Shaver (shaver@zeroknowledge.com)
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/sysctl.h>
+#include <linux/spinlock.h>
+#include <net/ax25.h>
+
+static int min_ipdefmode[1], max_ipdefmode[] = {1};
+static int min_axdefmode[1], max_axdefmode[] = {1};
+static int min_backoff[1], max_backoff[] = {2};
+static int min_conmode[1], max_conmode[] = {2};
+static int min_window[] = {1}, max_window[] = {7};
+static int min_ewindow[] = {1}, max_ewindow[] = {63};
+static int min_t1[] = {1}, max_t1[] = {30 * HZ};
+static int min_t2[] = {1}, max_t2[] = {20 * HZ};
+static int min_t3[1], max_t3[] = {3600 * HZ};
+static int min_idle[1], max_idle[] = {65535 * HZ};
+static int min_n2[] = {1}, max_n2[] = {31};
+static int min_paclen[] = {1}, max_paclen[] = {512};
+static int min_proto[1], max_proto[] = {3};
+static int min_ds_timeout[1], max_ds_timeout[] = {65535 * HZ};
+
+static struct ctl_table_header *ax25_table_header;
+
+static ctl_table *ax25_table;
+static int ax25_table_size;
+
+static ctl_table ax25_dir_table[] = {
+ {
+ .ctl_name = NET_AX25,
+ .procname = "ax25",
+ .mode = 0555,
+ },
+ { .ctl_name = 0 }
+};
+
+static ctl_table ax25_root_table[] = {
+ {
+ .ctl_name = CTL_NET,
+ .procname = "net",
+ .mode = 0555,
+ .child = ax25_dir_table
+ },
+ { .ctl_name = 0 }
+};
+
+static const ctl_table ax25_param_table[] = {
+ {
+ .ctl_name = NET_AX25_IP_DEFAULT_MODE,
+ .procname = "ip_default_mode",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_ipdefmode,
+ .extra2 = &max_ipdefmode
+ },
+ {
+ .ctl_name = NET_AX25_DEFAULT_MODE,
+ .procname = "ax25_default_mode",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_axdefmode,
+ .extra2 = &max_axdefmode
+ },
+ {
+ .ctl_name = NET_AX25_BACKOFF_TYPE,
+ .procname = "backoff_type",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_backoff,
+ .extra2 = &max_backoff
+ },
+ {
+ .ctl_name = NET_AX25_CONNECT_MODE,
+ .procname = "connect_mode",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_conmode,
+ .extra2 = &max_conmode
+ },
+ {
+ .ctl_name = NET_AX25_STANDARD_WINDOW,
+ .procname = "standard_window_size",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_window,
+ .extra2 = &max_window
+ },
+ {
+ .ctl_name = NET_AX25_EXTENDED_WINDOW,
+ .procname = "extended_window_size",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_ewindow,
+ .extra2 = &max_ewindow
+ },
+ {
+ .ctl_name = NET_AX25_T1_TIMEOUT,
+ .procname = "t1_timeout",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_t1,
+ .extra2 = &max_t1
+ },
+ {
+ .ctl_name = NET_AX25_T2_TIMEOUT,
+ .procname = "t2_timeout",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_t2,
+ .extra2 = &max_t2
+ },
+ {
+ .ctl_name = NET_AX25_T3_TIMEOUT,
+ .procname = "t3_timeout",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_t3,
+ .extra2 = &max_t3
+ },
+ {
+ .ctl_name = NET_AX25_IDLE_TIMEOUT,
+ .procname = "idle_timeout",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_idle,
+ .extra2 = &max_idle
+ },
+ {
+ .ctl_name = NET_AX25_N2,
+ .procname = "maximum_retry_count",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_n2,
+ .extra2 = &max_n2
+ },
+ {
+ .ctl_name = NET_AX25_PACLEN,
+ .procname = "maximum_packet_length",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_paclen,
+ .extra2 = &max_paclen
+ },
+ {
+ .ctl_name = NET_AX25_PROTOCOL,
+ .procname = "protocol",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_proto,
+ .extra2 = &max_proto
+ },
+ {
+ .ctl_name = NET_AX25_DAMA_SLAVE_TIMEOUT,
+ .procname = "dama_slave_timeout",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &min_ds_timeout,
+ .extra2 = &max_ds_timeout
+ },
+ { .ctl_name = 0 } /* that's all, folks! */
+};
+
+void ax25_register_sysctl(void)
+{
+ ax25_dev *ax25_dev;
+ int n, k;
+
+ spin_lock_bh(&ax25_dev_lock);
+ for (ax25_table_size = sizeof(ctl_table), ax25_dev = ax25_dev_list; ax25_dev != NULL; ax25_dev = ax25_dev->next)
+ ax25_table_size += sizeof(ctl_table);
+
+ if ((ax25_table = kmalloc(ax25_table_size, GFP_ATOMIC)) == NULL) {
+ spin_unlock_bh(&ax25_dev_lock);
+ return;
+ }
+
+ memset(ax25_table, 0x00, ax25_table_size);
+
+ for (n = 0, ax25_dev = ax25_dev_list; ax25_dev != NULL; ax25_dev = ax25_dev->next) {
+ ctl_table *child = kmalloc(sizeof(ax25_param_table), GFP_ATOMIC);
+ if (!child) {
+ while (n--)
+ kfree(ax25_table[n].child);
+ kfree(ax25_table);
+ spin_unlock_bh(&ax25_dev_lock);
+ return;
+ }
+ memcpy(child, ax25_param_table, sizeof(ax25_param_table));
+ ax25_table[n].child = ax25_dev->systable = child;
+ ax25_table[n].ctl_name = n + 1;
+ ax25_table[n].procname = ax25_dev->dev->name;
+ ax25_table[n].mode = 0555;
+
+#ifndef CONFIG_AX25_DAMA_SLAVE
+ /*
+ * We do not wish to have a representation of this parameter
+ * in /proc/sys/ when configured *not* to include the
+ * AX.25 DAMA slave code, do we?
+ */
+
+ child[AX25_VALUES_DS_TIMEOUT].procname = NULL;
+#endif
+
+ child[AX25_MAX_VALUES].ctl_name = 0; /* just in case... */
+
+ for (k = 0; k < AX25_MAX_VALUES; k++)
+ child[k].data = &ax25_dev->values[k];
+
+ n++;
+ }
+ spin_unlock_bh(&ax25_dev_lock);
+
+ ax25_dir_table[0].child = ax25_table;
+
+ ax25_table_header = register_sysctl_table(ax25_root_table, 1);
+}
+
+void ax25_unregister_sysctl(void)
+{
+ ctl_table *p;
+ unregister_sysctl_table(ax25_table_header);
+
+ ax25_dir_table[0].child = NULL;
+ for (p = ax25_table; p->ctl_name; p++)
+ kfree(p->child);
+ kfree(ax25_table);
+}
