diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
new file mode 100644
index 0000000..b66f53f
--- /dev/null
+++ b/sound/oss/mpu401.c
@@ -0,0 +1,1826 @@
+/*
+ * sound/mpu401.c
+ *
+ * The low level driver for Roland MPU-401 compatible Midi cards.
+ */
+/*
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ *
+ *
+ * Thomas Sailer	ioctl code reworked (vmalloc/vfree removed)
+ * Alan Cox		modularisation, use normal request_irq, use dev_id
+ * Bartlomiej Zolnierkiewicz	removed some __init to allow using many drivers
+ * Chris Rankin		Update the module-usage counter for the coprocessor
+ * Zwane Mwaikambo	Changed attach/unload resource freeing
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#define USE_SEQ_MACROS
+#define USE_SIMPLE_MACROS
+
+#include "sound_config.h"
+
+#include "coproc.h"
+#include "mpu401.h"
+
+static int      timer_mode = TMR_INTERNAL, timer_caps = TMR_INTERNAL;
+
+struct mpu_config
+{
+	int             base;	/*
+				 * I/O base
+				 */
+	int             irq;
+	int             opened;	/*
+				 * Open mode
+				 */
+	int             devno;
+	int             synthno;
+	int             uart_mode;
+	int             initialized;
+	int             mode;
+#define MODE_MIDI	1
+#define MODE_SYNTH	2
+	unsigned char   version, revision;
+	unsigned int    capabilities;
+#define MPU_CAP_INTLG	0x10000000
+#define MPU_CAP_SYNC	0x00000010
+#define MPU_CAP_FSK	0x00000020
+#define MPU_CAP_CLS	0x00000040
+#define MPU_CAP_SMPTE 	0x00000080
+#define MPU_CAP_2PORT	0x00000001
+	int             timer_flag;
+
+#define MBUF_MAX	10
+#define BUFTEST(dc) if (dc->m_ptr >= MBUF_MAX || dc->m_ptr < 0) \
+	{printk( "MPU: Invalid buffer pointer %d/%d, s=%d\n",  dc->m_ptr,  dc->m_left,  dc->m_state);dc->m_ptr--;}
+	  int             m_busy;
+	  unsigned char   m_buf[MBUF_MAX];
+	  int             m_ptr;
+	  int             m_state;
+	  int             m_left;
+	  unsigned char   last_status;
+	  void            (*inputintr) (int dev, unsigned char data);
+	  int             shared_irq;
+	  int            *osp;
+	  spinlock_t	lock;
+  };
+
+#define	DATAPORT(base)   (base)
+#define	COMDPORT(base)   (base+1)
+#define	STATPORT(base)   (base+1)
+
+
+static void mpu401_close(int dev);
+
+static inline int mpu401_status(struct mpu_config *devc)
+{
+	return inb(STATPORT(devc->base));
+}
+
+#define input_avail(devc)		(!(mpu401_status(devc)&INPUT_AVAIL))
+#define output_ready(devc)		(!(mpu401_status(devc)&OUTPUT_READY))
+
+static inline void write_command(struct mpu_config *devc, unsigned char cmd)
+{
+	outb(cmd, COMDPORT(devc->base));
+}
+
+static inline int read_data(struct mpu_config *devc)
+{
+	return inb(DATAPORT(devc->base));
+}
+
+static inline void write_data(struct mpu_config *devc, unsigned char byte)
+{
+	outb(byte, DATAPORT(devc->base));
+}
+
+#define	OUTPUT_READY	0x40
+#define	INPUT_AVAIL	0x80
+#define	MPU_ACK		0xFE
+#define	MPU_RESET	0xFF
+#define	UART_MODE_ON	0x3F
+
+static struct mpu_config dev_conf[MAX_MIDI_DEV];
+
+static int n_mpu_devs;
+
+static int reset_mpu401(struct mpu_config *devc);
+static void set_uart_mode(int dev, struct mpu_config *devc, int arg);
+
+static int mpu_timer_init(int midi_dev);
+static void mpu_timer_interrupt(void);
+static void timer_ext_event(struct mpu_config *devc, int event, int parm);
+
+static struct synth_info mpu_synth_info_proto = {
+	"MPU-401 MIDI interface", 
+	0, 
+	SYNTH_TYPE_MIDI, 
+	MIDI_TYPE_MPU401, 
+	0, 128, 
+	0, 128, 
+	SYNTH_CAP_INPUT
+};
+
+static struct synth_info mpu_synth_info[MAX_MIDI_DEV];
+
+/*
+ * States for the input scanner
+ */
+
+#define ST_INIT			0	/* Ready for timing byte or msg */
+#define ST_TIMED		1	/* Leading timing byte rcvd */
+#define ST_DATABYTE		2	/* Waiting for (nr_left) data bytes */
+
+#define ST_SYSMSG		100	/* System message (sysx etc). */
+#define ST_SYSEX		101	/* System exclusive msg */
+#define ST_MTC			102	/* Midi Time Code (MTC) qframe msg */
+#define ST_SONGSEL		103	/* Song select */
+#define ST_SONGPOS		104	/* Song position pointer */
+
+static unsigned char len_tab[] =	/* # of data bytes following a status
+					 */
+{
+	2,			/* 8x */
+	2,			/* 9x */
+	2,			/* Ax */
+	2,			/* Bx */
+	1,			/* Cx */
+	1,			/* Dx */
+	2,			/* Ex */
+	0			/* Fx */
+};
+
+#define STORE(cmd) \
+{ \
+	int len; \
+	unsigned char obuf[8]; \
+	cmd; \
+	seq_input_event(obuf, len); \
+}
+
+#define _seqbuf obuf
+#define _seqbufptr 0
+#define _SEQ_ADVBUF(x) len=x
+
+static int mpu_input_scanner(struct mpu_config *devc, unsigned char midic)
+{
+
+	switch (devc->m_state)
+	{
+		case ST_INIT:
+			switch (midic)
+			{
+				case 0xf8:
+				/* Timer overflow */
+					break;
+
+				case 0xfc:
+					printk("<all end>");
+			 		break;
+
+				case 0xfd:
+					if (devc->timer_flag)
+						mpu_timer_interrupt();
+					break;
+
+				case 0xfe:
+					return MPU_ACK;
+
+				case 0xf0:
+				case 0xf1:
+				case 0xf2:
+				case 0xf3:
+				case 0xf4:
+				case 0xf5:
+				case 0xf6:
+				case 0xf7:
+					printk("<Trk data rq #%d>", midic & 0x0f);
+					break;
+
+				case 0xf9:
+					printk("<conductor rq>");
+					break;
+
+				case 0xff:
+					devc->m_state = ST_SYSMSG;
+					break;
+
+				default:
+					if (midic <= 0xef)
+					{
+						/* printk( "mpu time: %d ",  midic); */
+						devc->m_state = ST_TIMED;
+					}
+					else
+						printk("<MPU: Unknown event %02x> ", midic);
+			}
+			break;
+
+		case ST_TIMED:
+			{
+				int msg = ((int) (midic & 0xf0) >> 4);
+
+				devc->m_state = ST_DATABYTE;
+
+				if (msg < 8)	/* Data byte */
+				{
+					/* printk( "midi msg (running status) "); */
+					msg = ((int) (devc->last_status & 0xf0) >> 4);
+					msg -= 8;
+					devc->m_left = len_tab[msg] - 1;
+
+					devc->m_ptr = 2;
+					devc->m_buf[0] = devc->last_status;
+					devc->m_buf[1] = midic;
+
+					if (devc->m_left <= 0)
+					{
+						devc->m_state = ST_INIT;
+						do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
+						devc->m_ptr = 0;
+					}
+				}
+				else if (msg == 0xf)	/* MPU MARK */
+				{
+					devc->m_state = ST_INIT;
+
+					switch (midic)
+					{
+						case 0xf8:
+							/* printk( "NOP "); */
+							break;
+
+						case 0xf9:
+							/* printk( "meas end "); */
+							break;
+
+						case 0xfc:
+							/* printk( "data end "); */
+							break;
+
+						default:
+							printk("Unknown MPU mark %02x\n", midic);
+					}
+				}
+				else
+				{
+					devc->last_status = midic;
+					/* printk( "midi msg "); */
+					msg -= 8;
+					devc->m_left = len_tab[msg];
+
+					devc->m_ptr = 1;
+					devc->m_buf[0] = midic;
+
+					if (devc->m_left <= 0)
+					{
+						devc->m_state = ST_INIT;
+						do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
+						devc->m_ptr = 0;
+					}
+				}
+			}
+			break;
+
+		case ST_SYSMSG:
+			switch (midic)
+			{
+				case 0xf0:
+					printk("<SYX>");
+					devc->m_state = ST_SYSEX;
+					break;
+
+				case 0xf1:
+					devc->m_state = ST_MTC;
+					break;
+
+				case 0xf2:
+					devc->m_state = ST_SONGPOS;
+					devc->m_ptr = 0;
+					break;
+
+				case 0xf3:
+					devc->m_state = ST_SONGSEL;
+					break;
+
+				case 0xf6:
+					/* printk( "tune_request\n"); */
+					devc->m_state = ST_INIT;
+
+					/*
+					 *    Real time messages
+					 */
+				case 0xf8:
+					/* midi clock */
+					devc->m_state = ST_INIT;
+					timer_ext_event(devc, TMR_CLOCK, 0);
+					break;
+
+				case 0xfA:
+					devc->m_state = ST_INIT;
+					timer_ext_event(devc, TMR_START, 0);
+					break;
+
+				case 0xFB:
+					devc->m_state = ST_INIT;
+					timer_ext_event(devc, TMR_CONTINUE, 0);
+					break;
+
+				case 0xFC:
+					devc->m_state = ST_INIT;
+					timer_ext_event(devc, TMR_STOP, 0);
+					break;
+
+				case 0xFE:
+					/* active sensing */
+					devc->m_state = ST_INIT;
+					break;
+
+				case 0xff:
+					/* printk( "midi hard reset"); */
+					devc->m_state = ST_INIT;
+					break;
+
+				default:
+					printk("unknown MIDI sysmsg %0x\n", midic);
+					devc->m_state = ST_INIT;
+			}
+			break;
+
+		case ST_MTC:
+			devc->m_state = ST_INIT;
+			printk("MTC frame %x02\n", midic);
+			break;
+
+		case ST_SYSEX:
+			if (midic == 0xf7)
+			{
+				printk("<EOX>");
+				devc->m_state = ST_INIT;
+			}
+			else
+				printk("%02x ", midic);
+			break;
+
+		case ST_SONGPOS:
+			BUFTEST(devc);
+			devc->m_buf[devc->m_ptr++] = midic;
+			if (devc->m_ptr == 2)
+			{
+				devc->m_state = ST_INIT;
+				devc->m_ptr = 0;
+				timer_ext_event(devc, TMR_SPP,
+					((devc->m_buf[1] & 0x7f) << 7) |
+					(devc->m_buf[0] & 0x7f));
+			}
+			break;
+
+		case ST_DATABYTE:
+			BUFTEST(devc);
+			devc->m_buf[devc->m_ptr++] = midic;
+			if ((--devc->m_left) <= 0)
+			{
+				devc->m_state = ST_INIT;
+				do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
+				devc->m_ptr = 0;
+			}
+			break;
+
+		default:
+			printk("Bad state %d ", devc->m_state);
+			devc->m_state = ST_INIT;
+	}
+	return 1;
+}
+
+static void mpu401_input_loop(struct mpu_config *devc)
+{
+	unsigned long flags;
+	int busy;
+	int n;
+
+	spin_lock_irqsave(&devc->lock,flags);
+	busy = devc->m_busy;
+	devc->m_busy = 1;
+	spin_unlock_irqrestore(&devc->lock,flags);
+
+	if (busy)		/* Already inside the scanner */
+		return;
+
+	n = 50;
+
+	while (input_avail(devc) && n-- > 0)
+	{
+		unsigned char c = read_data(devc);
+
+		if (devc->mode == MODE_SYNTH)
+		{
+			mpu_input_scanner(devc, c);
+		}
+		else if (devc->opened & OPEN_READ && devc->inputintr != NULL)
+			devc->inputintr(devc->devno, c);
+	}
+	devc->m_busy = 0;
+}
+
+int intchk_mpu401(void *dev_id)
+{
+	struct mpu_config *devc;
+	int dev = (int) dev_id;
+
+	devc = &dev_conf[dev];
+	return input_avail(devc);
+}
+
+irqreturn_t mpuintr(int irq, void *dev_id, struct pt_regs *dummy)
+{
+	struct mpu_config *devc;
+	int dev = (int) dev_id;
+	int handled = 0;
+
+	devc = &dev_conf[dev];
+
+	if (input_avail(devc))
+	{
+		handled = 1;
+		if (devc->base != 0 && (devc->opened & OPEN_READ || devc->mode == MODE_SYNTH))
+			mpu401_input_loop(devc);
+		else
+		{
+			/* Dummy read (just to acknowledge the interrupt) */
+			read_data(devc);
+		}
+	}
+	return IRQ_RETVAL(handled);
+}
+
+static int mpu401_open(int dev, int mode,
+	    void            (*input) (int dev, unsigned char data),
+	    void            (*output) (int dev)
+)
+{
+	int err;
+	struct mpu_config *devc;
+	struct coproc_operations *coprocessor;
+
+	if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL)
+		return -ENXIO;
+
+	devc = &dev_conf[dev];
+
+	if (devc->opened)
+		  return -EBUSY;
+	/*
+	 *  Verify that the device is really running.
+	 *  Some devices (such as Ensoniq SoundScape don't
+	 *  work before the on board processor (OBP) is initialized
+	 *  by downloading its microcode.
+	 */
+
+	if (!devc->initialized)
+	{
+		if (mpu401_status(devc) == 0xff)	/* Bus float */
+		{
+			printk(KERN_ERR "mpu401: Device not initialized properly\n");
+			return -EIO;
+		}
+		reset_mpu401(devc);
+	}
+
+	if ( (coprocessor = midi_devs[dev]->coproc) != NULL )
+	{
+		if (!try_module_get(coprocessor->owner)) {
+			mpu401_close(dev);
+			return -ENODEV;
+		}
+
+		if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
+		{
+			printk(KERN_WARNING "MPU-401: Can't access coprocessor device\n");
+			mpu401_close(dev);
+			return err;
+		}
+	}
+	
+	set_uart_mode(dev, devc, 1);
+	devc->mode = MODE_MIDI;
+	devc->synthno = 0;
+
+	mpu401_input_loop(devc);
+
+	devc->inputintr = input;
+	devc->opened = mode;
+
+	return 0;
+}
+
+static void mpu401_close(int dev)
+{
+	struct mpu_config *devc;
+	struct coproc_operations *coprocessor;
+
+	devc = &dev_conf[dev];
+	if (devc->uart_mode)
+		reset_mpu401(devc);	/*
+					 * This disables the UART mode
+					 */
+	devc->mode = 0;
+	devc->inputintr = NULL;
+
+	coprocessor = midi_devs[dev]->coproc;
+	if (coprocessor) {
+		coprocessor->close(coprocessor->devc, COPR_MIDI);
+		module_put(coprocessor->owner);
+	}
+	devc->opened = 0;
+}
+
+static int mpu401_out(int dev, unsigned char midi_byte)
+{
+	int timeout;
+	unsigned long flags;
+
+	struct mpu_config *devc;
+
+	devc = &dev_conf[dev];
+
+	/*
+	 * Sometimes it takes about 30000 loops before the output becomes ready
+	 * (After reset). Normally it takes just about 10 loops.
+	 */
+
+	for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
+
+	spin_lock_irqsave(&devc->lock,flags);
+	if (!output_ready(devc))
+	{
+		printk(KERN_WARNING "mpu401: Send data timeout\n");
+		spin_unlock_irqrestore(&devc->lock,flags);
+		return 0;
+	}
+	write_data(devc, midi_byte);
+	spin_unlock_irqrestore(&devc->lock,flags);
+	return 1;
+}
+
+static int mpu401_command(int dev, mpu_command_rec * cmd)
+{
+	int i, timeout, ok;
+	int ret = 0;
+	unsigned long   flags;
+	struct mpu_config *devc;
+
+	devc = &dev_conf[dev];
+
+	if (devc->uart_mode)	/*
+				 * Not possible in UART mode
+				 */
+	{
+		printk(KERN_WARNING "mpu401: commands not possible in the UART mode\n");
+		return -EINVAL;
+	}
+	/*
+	 * Test for input since pending input seems to block the output.
+	 */
+	if (input_avail(devc))
+		mpu401_input_loop(devc);
+
+	/*
+	 * Sometimes it takes about 50000 loops before the output becomes ready
+	 * (After reset). Normally it takes just about 10 loops.
+	 */
+
+	timeout = 50000;
+retry:
+	if (timeout-- <= 0)
+	{
+		printk(KERN_WARNING "mpu401: Command (0x%x) timeout\n", (int) cmd->cmd);
+		return -EIO;
+	}
+	spin_lock_irqsave(&devc->lock,flags);
+
+	if (!output_ready(devc))
+	{
+		spin_unlock_irqrestore(&devc->lock,flags);
+		goto retry;
+	}
+	write_command(devc, cmd->cmd);
+
+	ok = 0;
+	for (timeout = 50000; timeout > 0 && !ok; timeout--)
+	{
+		if (input_avail(devc))
+		{
+			if (devc->opened && devc->mode == MODE_SYNTH)
+			{
+				if (mpu_input_scanner(devc, read_data(devc)) == MPU_ACK)
+					ok = 1;
+			}
+			else
+			{
+				/* Device is not currently open. Use simpler method */
+				if (read_data(devc) == MPU_ACK)
+					ok = 1;
+			}
+		}
+	}
+	if (!ok)
+	{
+		spin_unlock_irqrestore(&devc->lock,flags);
+		return -EIO;
+	}
+	if (cmd->nr_args)
+	{
+		for (i = 0; i < cmd->nr_args; i++)
+		{
+			for (timeout = 3000; timeout > 0 && !output_ready(devc); timeout--);
+
+			if (!mpu401_out(dev, cmd->data[i]))
+			{
+				spin_unlock_irqrestore(&devc->lock,flags);
+				printk(KERN_WARNING "mpu401: Command (0x%x), parm send failed.\n", (int) cmd->cmd);
+				return -EIO;
+			}
+		}
+	}
+	ret = 0;
+	cmd->data[0] = 0;
+
+	if (cmd->nr_returns)
+	{
+		for (i = 0; i < cmd->nr_returns; i++)
+		{
+			ok = 0;
+			for (timeout = 5000; timeout > 0 && !ok; timeout--)
+				if (input_avail(devc))
+				{
+					cmd->data[i] = read_data(devc);
+					ok = 1;
+				}
+			if (!ok)
+			{
+				spin_unlock_irqrestore(&devc->lock,flags);
+				return -EIO;
+			}
+		}
+	}
+	spin_unlock_irqrestore(&devc->lock,flags);
+	return ret;
+}
+
+static int mpu_cmd(int dev, int cmd, int data)
+{
+	int ret;
+
+	static mpu_command_rec rec;
+
+	rec.cmd = cmd & 0xff;
+	rec.nr_args = ((cmd & 0xf0) == 0xE0);
+	rec.nr_returns = ((cmd & 0xf0) == 0xA0);
+	rec.data[0] = data & 0xff;
+
+	if ((ret = mpu401_command(dev, &rec)) < 0)
+		return ret;
+	return (unsigned char) rec.data[0];
+}
+
+static int mpu401_prefix_cmd(int dev, unsigned char status)
+{
+	struct mpu_config *devc = &dev_conf[dev];
+
+	if (devc->uart_mode)
+		return 1;
+
+	if (status < 0xf0)
+	{
+		if (mpu_cmd(dev, 0xD0, 0) < 0)
+			return 0;
+		return 1;
+	}
+	switch (status)
+	{
+		case 0xF0:
+			if (mpu_cmd(dev, 0xDF, 0) < 0)
+				return 0;
+			return 1;
+
+		default:
+			return 0;
+	}
+}
+
+static int mpu401_start_read(int dev)
+{
+	return 0;
+}
+
+static int mpu401_end_read(int dev)
+{
+	return 0;
+}
+
+static int mpu401_ioctl(int dev, unsigned cmd, void __user *arg)
+{
+	struct mpu_config *devc;
+	mpu_command_rec rec;
+	int val, ret;
+
+	devc = &dev_conf[dev];
+	switch (cmd) 
+	{
+		case SNDCTL_MIDI_MPUMODE:
+			if (!(devc->capabilities & MPU_CAP_INTLG)) { /* No intelligent mode */
+				printk(KERN_WARNING "mpu401: Intelligent mode not supported by the HW\n");
+				return -EINVAL;
+			}
+			if (get_user(val, (int __user *)arg))
+				return -EFAULT;
+			set_uart_mode(dev, devc, !val);
+			return 0;
+
+		case SNDCTL_MIDI_MPUCMD:
+			if (copy_from_user(&rec, arg, sizeof(rec)))
+				return -EFAULT;
+			if ((ret = mpu401_command(dev, &rec)) < 0)
+				return ret;
+			if (copy_to_user(arg, &rec, sizeof(rec)))
+				return -EFAULT;
+			return 0;
+
+		default:
+			return -EINVAL;
+	}
+}
+
+static void mpu401_kick(int dev)
+{
+}
+
+static int mpu401_buffer_status(int dev)
+{
+	return 0;		/*
+				 * No data in buffers
+				 */
+}
+
+static int mpu_synth_ioctl(int dev, unsigned int cmd, void __user *arg)
+{
+	int midi_dev;
+	struct mpu_config *devc;
+
+	midi_dev = synth_devs[dev]->midi_dev;
+
+	if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
+		return -ENXIO;
+
+	devc = &dev_conf[midi_dev];
+
+	switch (cmd)
+	{
+
+		case SNDCTL_SYNTH_INFO:
+			if (copy_to_user(arg, &mpu_synth_info[midi_dev],
+					sizeof(struct synth_info)))
+				return -EFAULT;
+			return 0;
+
+		case SNDCTL_SYNTH_MEMAVL:
+			return 0x7fffffff;
+
+		default:
+			return -EINVAL;
+	}
+}
+
+static int mpu_synth_open(int dev, int mode)
+{
+	int midi_dev, err;
+	struct mpu_config *devc;
+	struct coproc_operations *coprocessor;
+
+	midi_dev = synth_devs[dev]->midi_dev;
+
+	if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
+		return -ENXIO;
+
+	devc = &dev_conf[midi_dev];
+
+	/*
+	 *  Verify that the device is really running.
+	 *  Some devices (such as Ensoniq SoundScape don't
+	 *  work before the on board processor (OBP) is initialized
+	 *  by downloading its microcode.
+	 */
+
+	if (!devc->initialized)
+	{
+		if (mpu401_status(devc) == 0xff)	/* Bus float */
+		{
+			printk(KERN_ERR "mpu401: Device not initialized properly\n");
+			return -EIO;
+		}
+		reset_mpu401(devc);
+	}
+	if (devc->opened)
+		return -EBUSY;
+	devc->mode = MODE_SYNTH;
+	devc->synthno = dev;
+
+	devc->inputintr = NULL;
+
+	coprocessor = midi_devs[midi_dev]->coproc;
+	if (coprocessor) {
+		if (!try_module_get(coprocessor->owner))
+			return -ENODEV;
+
+		if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
+		{
+			printk(KERN_WARNING "mpu401: Can't access coprocessor device\n");
+			return err;
+		}
+	}
+	devc->opened = mode;
+	reset_mpu401(devc);
+
+	if (mode & OPEN_READ)
+	{
+		mpu_cmd(midi_dev, 0x8B, 0);	/* Enable data in stop mode */
+		mpu_cmd(midi_dev, 0x34, 0);	/* Return timing bytes in stop mode */
+		mpu_cmd(midi_dev, 0x87, 0);	/* Enable pitch & controller */
+	}
+	return 0;
+}
+
+static void mpu_synth_close(int dev)
+{ 
+	int midi_dev;
+	struct mpu_config *devc;
+	struct coproc_operations *coprocessor;
+
+	midi_dev = synth_devs[dev]->midi_dev;
+
+	devc = &dev_conf[midi_dev];
+	mpu_cmd(midi_dev, 0x15, 0);	/* Stop recording, playback and MIDI */
+	mpu_cmd(midi_dev, 0x8a, 0);	/* Disable data in stopped mode */
+
+	devc->inputintr = NULL;
+
+	coprocessor = midi_devs[midi_dev]->coproc;
+	if (coprocessor) {
+		coprocessor->close(coprocessor->devc, COPR_MIDI);
+		module_put(coprocessor->owner);
+	}
+	devc->opened = 0;
+	devc->mode = 0;
+}
+
+#define MIDI_SYNTH_NAME	"MPU-401 UART Midi"
+#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
+#include "midi_synth.h"
+
+static struct synth_operations mpu401_synth_proto =
+{
+	.owner		= THIS_MODULE,
+	.id		= "MPU401",
+	.info		= NULL,
+	.midi_dev	= 0,
+	.synth_type	= SYNTH_TYPE_MIDI,
+	.synth_subtype	= 0,
+	.open		= mpu_synth_open,
+	.close		= mpu_synth_close,
+	.ioctl		= mpu_synth_ioctl,
+	.kill_note	= midi_synth_kill_note,
+	.start_note	= midi_synth_start_note,
+	.set_instr	= midi_synth_set_instr,
+	.reset		= midi_synth_reset,
+	.hw_control	= midi_synth_hw_control,
+	.load_patch	= midi_synth_load_patch,
+	.aftertouch	= midi_synth_aftertouch,
+	.controller	= midi_synth_controller,
+	.panning	= midi_synth_panning,
+	.bender		= midi_synth_bender,
+	.setup_voice	= midi_synth_setup_voice,
+	.send_sysex	= midi_synth_send_sysex
+};
+
+static struct synth_operations *mpu401_synth_operations[MAX_MIDI_DEV];
+
+static struct midi_operations mpu401_midi_proto =
+{
+	.owner		= THIS_MODULE,
+	.info		= {"MPU-401 Midi", 0, MIDI_CAP_MPU401, SNDCARD_MPU401},
+	.in_info	= {0},
+	.open		= mpu401_open,
+	.close		= mpu401_close,
+	.ioctl		= mpu401_ioctl,
+	.outputc	= mpu401_out,
+	.start_read	= mpu401_start_read,
+	.end_read	= mpu401_end_read,
+	.kick		= mpu401_kick,
+	.buffer_status	= mpu401_buffer_status,
+	.prefix_cmd	= mpu401_prefix_cmd
+};
+
+static struct midi_operations mpu401_midi_operations[MAX_MIDI_DEV];
+
+static void mpu401_chk_version(int n, struct mpu_config *devc)
+{
+	int tmp;
+	unsigned long flags;
+
+	devc->version = devc->revision = 0;
+
+	spin_lock_irqsave(&devc->lock,flags);
+	if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0)
+	{
+		spin_unlock_irqrestore(&devc->lock,flags);
+		return;
+	}
+	if ((tmp & 0xf0) > 0x20)	/* Why it's larger than 2.x ??? */
+	{
+		spin_unlock_irqrestore(&devc->lock,flags);
+		return;
+	}
+	devc->version = tmp;
+
+	if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0)
+	{
+		devc->version = 0;
+		spin_unlock_irqrestore(&devc->lock,flags);
+		return;
+	}
+	devc->revision = tmp;
+	spin_unlock_irqrestore(&devc->lock,flags);
+}
+
+int attach_mpu401(struct address_info *hw_config, struct module *owner)
+{
+	unsigned long flags;
+	char revision_char;
+
+	int m, ret;
+	struct mpu_config *devc;
+
+	hw_config->slots[1] = -1;
+	m = sound_alloc_mididev();
+	if (m == -1)
+	{
+		printk(KERN_WARNING "MPU-401: Too many midi devices detected\n");
+		ret = -ENOMEM;
+		goto out_err;
+	}
+	devc = &dev_conf[m];
+	devc->base = hw_config->io_base;
+	devc->osp = hw_config->osp;
+	devc->irq = hw_config->irq;
+	devc->opened = 0;
+	devc->uart_mode = 0;
+	devc->initialized = 0;
+	devc->version = 0;
+	devc->revision = 0;
+	devc->capabilities = 0;
+	devc->timer_flag = 0;
+	devc->m_busy = 0;
+	devc->m_state = ST_INIT;
+	devc->shared_irq = hw_config->always_detect;
+	devc->irq = hw_config->irq;
+	spin_lock_init(&devc->lock);
+
+	if (devc->irq < 0)
+	{
+		devc->irq *= -1;
+		devc->shared_irq = 1;
+	}
+
+	if (!hw_config->always_detect)
+	{
+		/* Verify the hardware again */
+		if (!reset_mpu401(devc))
+		{
+			printk(KERN_WARNING "mpu401: Device didn't respond\n");
+			ret = -ENODEV;
+			goto out_mididev;
+		}
+		if (!devc->shared_irq)
+		{
+			if (request_irq(devc->irq, mpuintr, 0, "mpu401", (void *)m) < 0)
+			{
+				printk(KERN_WARNING "mpu401: Failed to allocate IRQ%d\n", devc->irq);
+				ret = -ENOMEM;
+				goto out_mididev;
+			}
+		}
+		spin_lock_irqsave(&devc->lock,flags);
+		mpu401_chk_version(m, devc);
+		if (devc->version == 0)
+			mpu401_chk_version(m, devc);
+			spin_unlock_irqrestore(&devc->lock,flags);
+	}
+
+	if (devc->version != 0)
+		if (mpu_cmd(m, 0xC5, 0) >= 0)	/* Set timebase OK */
+			if (mpu_cmd(m, 0xE0, 120) >= 0)		/* Set tempo OK */
+				devc->capabilities |= MPU_CAP_INTLG;	/* Supports intelligent mode */
+
+
+	mpu401_synth_operations[m] = (struct synth_operations *)kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
+
+	if (mpu401_synth_operations[m] == NULL)
+	{
+		printk(KERN_ERR "mpu401: Can't allocate memory\n");
+		ret = -ENOMEM;
+		goto out_irq;
+	}
+	if (!(devc->capabilities & MPU_CAP_INTLG))	/* No intelligent mode */
+	{
+		memcpy((char *) mpu401_synth_operations[m],
+			(char *) &std_midi_synth,
+			 sizeof(struct synth_operations));
+	}
+	else
+	{
+		memcpy((char *) mpu401_synth_operations[m],
+			(char *) &mpu401_synth_proto,
+			 sizeof(struct synth_operations));
+	}
+	if (owner)
+		mpu401_synth_operations[m]->owner = owner;
+
+	memcpy((char *) &mpu401_midi_operations[m],
+	       (char *) &mpu401_midi_proto,
+	       sizeof(struct midi_operations));
+
+	mpu401_midi_operations[m].converter = mpu401_synth_operations[m];
+
+	memcpy((char *) &mpu_synth_info[m],
+	       (char *) &mpu_synth_info_proto,
+	       sizeof(struct synth_info));
+
+	n_mpu_devs++;
+
+	if (devc->version == 0x20 && devc->revision >= 0x07)	/* MusicQuest interface */
+	{
+		int ports = (devc->revision & 0x08) ? 32 : 16;
+
+		devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_SMPTE |
+				MPU_CAP_CLS | MPU_CAP_2PORT;
+
+		revision_char = (devc->revision == 0x7f) ? 'M' : ' ';
+		sprintf(mpu_synth_info[m].name, "MQX-%d%c MIDI Interface #%d",
+				ports,
+				revision_char,
+				n_mpu_devs);
+	}
+	else
+	{
+		revision_char = devc->revision ? devc->revision + '@' : ' ';
+		if ((int) devc->revision > ('Z' - '@'))
+			revision_char = '+';
+
+		devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_FSK;
+
+		if (hw_config->name)
+			sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
+		else
+			sprintf(mpu_synth_info[m].name,
+				"MPU-401 %d.%d%c Midi interface #%d",
+				(int) (devc->version & 0xf0) >> 4,
+				devc->version & 0x0f,
+				revision_char,
+				n_mpu_devs);
+	}
+
+	strcpy(mpu401_midi_operations[m].info.name,
+	       mpu_synth_info[m].name);
+
+	conf_printf(mpu_synth_info[m].name, hw_config);
+
+	mpu401_synth_operations[m]->midi_dev = devc->devno = m;
+	mpu401_synth_operations[devc->devno]->info = &mpu_synth_info[devc->devno];
+
+	if (devc->capabilities & MPU_CAP_INTLG)		/* Intelligent mode */
+		hw_config->slots[2] = mpu_timer_init(m);
+
+	midi_devs[m] = &mpu401_midi_operations[devc->devno];
+	
+	if (owner)
+		midi_devs[m]->owner = owner;
+
+	hw_config->slots[1] = m;
+	sequencer_init();
+	
+	return 0;
+
+out_irq:
+	free_irq(devc->irq, (void *)m);
+out_mididev:
+	sound_unload_mididev(m);
+out_err:
+	release_region(hw_config->io_base, 2);
+	return ret;
+}
+
+static int reset_mpu401(struct mpu_config *devc)
+{
+	unsigned long flags;
+	int ok, timeout, n;
+	int timeout_limit;
+
+	/*
+	 * Send the RESET command. Try again if no success at the first time.
+	 * (If the device is in the UART mode, it will not ack the reset cmd).
+	 */
+
+	ok = 0;
+
+	timeout_limit = devc->initialized ? 30000 : 100000;
+	devc->initialized = 1;
+
+	for (n = 0; n < 2 && !ok; n++)
+	{
+		for (timeout = timeout_limit; timeout > 0 && !ok; timeout--)
+			  ok = output_ready(devc);
+
+		write_command(devc, MPU_RESET);	/*
+							   * Send MPU-401 RESET Command
+							 */
+
+		/*
+		 * Wait at least 25 msec. This method is not accurate so let's make the
+		 * loop bit longer. Cannot sleep since this is called during boot.
+		 */
+
+		for (timeout = timeout_limit * 2; timeout > 0 && !ok; timeout--)
+		{
+			spin_lock_irqsave(&devc->lock,flags);
+			if (input_avail(devc))
+				if (read_data(devc) == MPU_ACK)
+					ok = 1;
+			spin_unlock_irqrestore(&devc->lock,flags);
+		}
+
+	}
+
+	devc->m_state = ST_INIT;
+	devc->m_ptr = 0;
+	devc->m_left = 0;
+	devc->last_status = 0;
+	devc->uart_mode = 0;
+
+	return ok;
+}
+
+static void set_uart_mode(int dev, struct mpu_config *devc, int arg)
+{
+	if (!arg && (devc->capabilities & MPU_CAP_INTLG))
+		return;
+	if ((devc->uart_mode == 0) == (arg == 0))
+		return;		/* Already set */
+	reset_mpu401(devc);	/* This exits the uart mode */
+
+	if (arg)
+	{
+		if (mpu_cmd(dev, UART_MODE_ON, 0) < 0)
+		{
+			printk(KERN_ERR "mpu401: Can't enter UART mode\n");
+			devc->uart_mode = 0;
+			return;
+		}
+	}
+	devc->uart_mode = arg;
+
+}
+
+int probe_mpu401(struct address_info *hw_config, struct resource *ports)
+{
+	int ok = 0;
+	struct mpu_config tmp_devc;
+
+	tmp_devc.base = hw_config->io_base;
+	tmp_devc.irq = hw_config->irq;
+	tmp_devc.initialized = 0;
+	tmp_devc.opened = 0;
+	tmp_devc.osp = hw_config->osp;
+
+	if (hw_config->always_detect)
+		return 1;
+
+	if (inb(hw_config->io_base + 1) == 0xff)
+	{
+		DDB(printk("MPU401: Port %x looks dead.\n", hw_config->io_base));
+		return 0;	/* Just bus float? */
+	}
+	ok = reset_mpu401(&tmp_devc);
+
+	if (!ok)
+	{
+		DDB(printk("MPU401: Reset failed on port %x\n", hw_config->io_base));
+	}
+	return ok;
+}
+
+void unload_mpu401(struct address_info *hw_config)
+{
+	void *p;
+	int n=hw_config->slots[1];
+		
+	if (n != -1) {
+		release_region(hw_config->io_base, 2);
+		if (hw_config->always_detect == 0 && hw_config->irq > 0)
+			free_irq(hw_config->irq, (void *)n);
+		p=mpu401_synth_operations[n];
+		sound_unload_mididev(n);
+		sound_unload_timerdev(hw_config->slots[2]);
+		if(p)
+			kfree(p);
+	}
+}
+
+/*****************************************************
+ *      Timer stuff
+ ****************************************************/
+
+static volatile int timer_initialized = 0, timer_open = 0, tmr_running = 0;
+static volatile int curr_tempo, curr_timebase, hw_timebase;
+static int      max_timebase = 8;	/* 8*24=192 ppqn */
+static volatile unsigned long next_event_time;
+static volatile unsigned long curr_ticks, curr_clocks;
+static unsigned long prev_event_time;
+static int      metronome_mode;
+
+static unsigned long clocks2ticks(unsigned long clocks)
+{
+	/*
+	 * The MPU-401 supports just a limited set of possible timebase values.
+	 * Since the applications require more choices, the driver has to
+	 * program the HW to do its best and to convert between the HW and
+	 * actual timebases.
+	 */
+	return ((clocks * curr_timebase) + (hw_timebase / 2)) / hw_timebase;
+}
+
+static void set_timebase(int midi_dev, int val)
+{
+	int hw_val;
+
+	if (val < 48)
+		val = 48;
+	if (val > 1000)
+		val = 1000;
+
+	hw_val = val;
+	hw_val = (hw_val + 12) / 24;
+	if (hw_val > max_timebase)
+		hw_val = max_timebase;
+
+	if (mpu_cmd(midi_dev, 0xC0 | (hw_val & 0x0f), 0) < 0)
+	{
+		printk(KERN_WARNING "mpu401: Can't set HW timebase to %d\n", hw_val * 24);
+		return;
+	}
+	hw_timebase = hw_val * 24;
+	curr_timebase = val;
+
+}
+
+static void tmr_reset(struct mpu_config *devc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&devc->lock,flags);
+	next_event_time = (unsigned long) -1;
+	prev_event_time = 0;
+	curr_ticks = curr_clocks = 0;
+	spin_unlock_irqrestore(&devc->lock,flags);
+}
+
+static void set_timer_mode(int midi_dev)
+{
+	if (timer_mode & TMR_MODE_CLS)
+		mpu_cmd(midi_dev, 0x3c, 0);	/* Use CLS sync */
+	else if (timer_mode & TMR_MODE_SMPTE)
+		mpu_cmd(midi_dev, 0x3d, 0);	/* Use SMPTE sync */
+
+	if (timer_mode & TMR_INTERNAL)
+	{
+		  mpu_cmd(midi_dev, 0x80, 0);	/* Use MIDI sync */
+	}
+	else
+	{
+		if (timer_mode & (TMR_MODE_MIDI | TMR_MODE_CLS))
+		{
+			mpu_cmd(midi_dev, 0x82, 0);		/* Use MIDI sync */
+			mpu_cmd(midi_dev, 0x91, 0);		/* Enable ext MIDI ctrl */
+		}
+		else if (timer_mode & TMR_MODE_FSK)
+			mpu_cmd(midi_dev, 0x81, 0);	/* Use FSK sync */
+	}
+}
+
+static void stop_metronome(int midi_dev)
+{
+	mpu_cmd(midi_dev, 0x84, 0);	/* Disable metronome */
+}
+
+static void setup_metronome(int midi_dev)
+{
+	int numerator, denominator;
+	int clks_per_click, num_32nds_per_beat;
+	int beats_per_measure;
+
+	numerator = ((unsigned) metronome_mode >> 24) & 0xff;
+	denominator = ((unsigned) metronome_mode >> 16) & 0xff;
+	clks_per_click = ((unsigned) metronome_mode >> 8) & 0xff;
+	num_32nds_per_beat = (unsigned) metronome_mode & 0xff;
+	beats_per_measure = (numerator * 4) >> denominator;
+
+	if (!metronome_mode)
+		mpu_cmd(midi_dev, 0x84, 0);	/* Disable metronome */
+	else
+	{
+		mpu_cmd(midi_dev, 0xE4, clks_per_click);
+		mpu_cmd(midi_dev, 0xE6, beats_per_measure);
+		mpu_cmd(midi_dev, 0x83, 0);	/* Enable metronome without accents */
+	}
+}
+
+static int mpu_start_timer(int midi_dev)
+{
+	struct mpu_config *devc= &dev_conf[midi_dev];
+
+	tmr_reset(devc);
+	set_timer_mode(midi_dev);
+
+	if (tmr_running)
+		return TIMER_NOT_ARMED;		/* Already running */
+
+	if (timer_mode & TMR_INTERNAL)
+	{
+		mpu_cmd(midi_dev, 0x02, 0);	/* Send MIDI start */
+		tmr_running = 1;
+		return TIMER_NOT_ARMED;
+	}
+	else
+	{
+		mpu_cmd(midi_dev, 0x35, 0);	/* Enable mode messages to PC */
+		mpu_cmd(midi_dev, 0x38, 0);	/* Enable sys common messages to PC */
+		mpu_cmd(midi_dev, 0x39, 0);	/* Enable real time messages to PC */
+		mpu_cmd(midi_dev, 0x97, 0);	/* Enable system exclusive messages to PC */
+	}
+	return TIMER_ARMED;
+}
+
+static int mpu_timer_open(int dev, int mode)
+{
+	int midi_dev = sound_timer_devs[dev]->devlink;
+	struct mpu_config *devc= &dev_conf[midi_dev];
+
+	if (timer_open)
+		return -EBUSY;
+
+	tmr_reset(devc);
+	curr_tempo = 50;
+	mpu_cmd(midi_dev, 0xE0, 50);
+	curr_timebase = hw_timebase = 120;
+	set_timebase(midi_dev, 120);
+	timer_open = 1;
+	metronome_mode = 0;
+	set_timer_mode(midi_dev);
+
+	mpu_cmd(midi_dev, 0xe7, 0x04);	/* Send all clocks to host */
+	mpu_cmd(midi_dev, 0x95, 0);	/* Enable clock to host */
+
+	return 0;
+}
+
+static void mpu_timer_close(int dev)
+{
+	int midi_dev = sound_timer_devs[dev]->devlink;
+
+	timer_open = tmr_running = 0;
+	mpu_cmd(midi_dev, 0x15, 0);	/* Stop all */
+	mpu_cmd(midi_dev, 0x94, 0);	/* Disable clock to host */
+	mpu_cmd(midi_dev, 0x8c, 0);	/* Disable measure end messages to host */
+	stop_metronome(midi_dev);
+}
+
+static int mpu_timer_event(int dev, unsigned char *event)
+{
+	unsigned char command = event[1];
+	unsigned long parm = *(unsigned int *) &event[4];
+	int midi_dev = sound_timer_devs[dev]->devlink;
+
+	switch (command)
+	{
+		case TMR_WAIT_REL:
+			parm += prev_event_time;
+		case TMR_WAIT_ABS:
+			if (parm > 0)
+			{
+				long time;
+
+				if (parm <= curr_ticks)	/* It's the time */
+					return TIMER_NOT_ARMED;
+				time = parm;
+				next_event_time = prev_event_time = time;
+
+				return TIMER_ARMED;
+			}
+			break;
+
+		case TMR_START:
+			if (tmr_running)
+				break;
+			return mpu_start_timer(midi_dev);
+
+		case TMR_STOP:
+			mpu_cmd(midi_dev, 0x01, 0);	/* Send MIDI stop */
+			stop_metronome(midi_dev);
+			tmr_running = 0;
+			break;
+
+		case TMR_CONTINUE:
+			if (tmr_running)
+				break;
+			mpu_cmd(midi_dev, 0x03, 0);	/* Send MIDI continue */
+			setup_metronome(midi_dev);
+			tmr_running = 1;
+			break;
+
+		case TMR_TEMPO:
+			if (parm)
+			{
+				if (parm < 8)
+					parm = 8;
+			 	if (parm > 250)
+					parm = 250;
+				if (mpu_cmd(midi_dev, 0xE0, parm) < 0)
+					printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) parm);
+				curr_tempo = parm;
+			}
+			break;
+
+		case TMR_ECHO:
+			seq_copy_to_input(event, 8);
+			break;
+
+		case TMR_TIMESIG:
+			if (metronome_mode)	/* Metronome enabled */
+			{
+				metronome_mode = parm;
+				setup_metronome(midi_dev);
+			}
+			break;
+
+		default:;
+	}
+	return TIMER_NOT_ARMED;
+}
+
+static unsigned long mpu_timer_get_time(int dev)
+{
+	if (!timer_open)
+		return 0;
+
+	return curr_ticks;
+}
+
+static int mpu_timer_ioctl(int dev, unsigned int command, void __user *arg)
+{
+	int midi_dev = sound_timer_devs[dev]->devlink;
+	int __user *p = (int __user *)arg;
+
+	switch (command)
+	{
+		case SNDCTL_TMR_SOURCE:
+			{
+				int parm;
+
+				if (get_user(parm, p))
+					return -EFAULT;
+				parm &= timer_caps;
+
+				if (parm != 0)
+				{
+					timer_mode = parm;
+	
+					if (timer_mode & TMR_MODE_CLS)
+						mpu_cmd(midi_dev, 0x3c, 0);		/* Use CLS sync */
+					else if (timer_mode & TMR_MODE_SMPTE)
+						mpu_cmd(midi_dev, 0x3d, 0);		/* Use SMPTE sync */
+				}
+				if (put_user(timer_mode, p))
+					return -EFAULT;
+				return timer_mode;
+			}
+			break;
+
+		case SNDCTL_TMR_START:
+			mpu_start_timer(midi_dev);
+			return 0;
+
+		case SNDCTL_TMR_STOP:
+			tmr_running = 0;
+			mpu_cmd(midi_dev, 0x01, 0);	/* Send MIDI stop */
+			stop_metronome(midi_dev);
+			return 0;
+
+		case SNDCTL_TMR_CONTINUE:
+			if (tmr_running)
+				return 0;
+			tmr_running = 1;
+			mpu_cmd(midi_dev, 0x03, 0);	/* Send MIDI continue */
+			return 0;
+
+		case SNDCTL_TMR_TIMEBASE:
+			{
+				int val;
+				if (get_user(val, p))
+					return -EFAULT;
+				if (val)
+					set_timebase(midi_dev, val);
+				if (put_user(curr_timebase, p))
+					return -EFAULT;
+				return curr_timebase;
+			}
+			break;
+
+		case SNDCTL_TMR_TEMPO:
+			{
+				int val;
+				int ret;
+
+				if (get_user(val, p))
+					return -EFAULT;
+
+				if (val)
+				{
+					if (val < 8)
+						val = 8;
+					if (val > 250)
+						val = 250;
+					if ((ret = mpu_cmd(midi_dev, 0xE0, val)) < 0)
+					{
+						printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) val);
+						return ret;
+					}
+					curr_tempo = val;
+				}
+				if (put_user(curr_tempo, p))
+					return -EFAULT;
+				return curr_tempo;
+			}
+			break;
+
+		case SNDCTL_SEQ_CTRLRATE:
+			{
+				int val;
+				if (get_user(val, p))
+					return -EFAULT;
+
+				if (val != 0)		/* Can't change */
+					return -EINVAL;
+				val = ((curr_tempo * curr_timebase) + 30)/60;
+				if (put_user(val, p))
+					return -EFAULT;
+				return val;
+			}
+			break;
+
+		case SNDCTL_SEQ_GETTIME:
+			if (put_user(curr_ticks, p))
+				return -EFAULT;
+			return curr_ticks;
+
+		case SNDCTL_TMR_METRONOME:
+			if (get_user(metronome_mode, p))
+				return -EFAULT;
+			setup_metronome(midi_dev);
+			return 0;
+
+		default:;
+	}
+	return -EINVAL;
+}
+
+static void mpu_timer_arm(int dev, long time)
+{
+	if (time < 0)
+		time = curr_ticks + 1;
+	else if (time <= curr_ticks)	/* It's the time */
+		return;
+	next_event_time = prev_event_time = time;
+	return;
+}
+
+static struct sound_timer_operations mpu_timer =
+{
+	.owner		= THIS_MODULE,
+	.info		= {"MPU-401 Timer", 0},
+	.priority	= 10,	/* Priority */
+	.devlink	= 0,	/* Local device link */
+	.open		= mpu_timer_open,
+	.close		= mpu_timer_close,
+	.event		= mpu_timer_event,
+	.get_time	= mpu_timer_get_time,
+	.ioctl		= mpu_timer_ioctl,
+	.arm_timer	= mpu_timer_arm
+};
+
+static void mpu_timer_interrupt(void)
+{
+	if (!timer_open)
+		return;
+
+	if (!tmr_running)
+		return;
+
+	curr_clocks++;
+	curr_ticks = clocks2ticks(curr_clocks);
+
+	if (curr_ticks >= next_event_time)
+	{
+		next_event_time = (unsigned long) -1;
+		sequencer_timer(0);
+	}
+}
+
+static void timer_ext_event(struct mpu_config *devc, int event, int parm)
+{
+	int midi_dev = devc->devno;
+
+	if (!devc->timer_flag)
+		return;
+
+	switch (event)
+	{
+		case TMR_CLOCK:
+			printk("<MIDI clk>");
+			break;
+
+		case TMR_START:
+			printk("Ext MIDI start\n");
+			if (!tmr_running)
+			{
+				if (timer_mode & TMR_EXTERNAL)
+				{
+					tmr_running = 1;
+					setup_metronome(midi_dev);
+					next_event_time = 0;
+					STORE(SEQ_START_TIMER());
+				}
+			}
+			break;
+
+		case TMR_STOP:
+			printk("Ext MIDI stop\n");
+			if (timer_mode & TMR_EXTERNAL)
+			{
+				tmr_running = 0;
+				stop_metronome(midi_dev);
+				STORE(SEQ_STOP_TIMER());
+			}
+			break;
+
+		case TMR_CONTINUE:
+			printk("Ext MIDI continue\n");
+			if (timer_mode & TMR_EXTERNAL)
+			{
+				tmr_running = 1;
+				setup_metronome(midi_dev);
+				STORE(SEQ_CONTINUE_TIMER());
+		  	}
+		  	break;
+
+		case TMR_SPP:
+			printk("Songpos: %d\n", parm);
+			if (timer_mode & TMR_EXTERNAL)
+			{
+				STORE(SEQ_SONGPOS(parm));
+			}
+			break;
+	}
+}
+
+static int mpu_timer_init(int midi_dev)
+{
+	struct mpu_config *devc;
+	int n;
+
+	devc = &dev_conf[midi_dev];
+
+	if (timer_initialized)
+		return -1;	/* There is already a similar timer */
+
+	timer_initialized = 1;
+
+	mpu_timer.devlink = midi_dev;
+	dev_conf[midi_dev].timer_flag = 1;
+
+	n = sound_alloc_timerdev();
+	if (n == -1)
+		n = 0;
+	sound_timer_devs[n] = &mpu_timer;
+
+	if (devc->version < 0x20)	/* Original MPU-401 */
+		timer_caps = TMR_INTERNAL | TMR_EXTERNAL | TMR_MODE_FSK | TMR_MODE_MIDI;
+	else
+	{
+		/*
+		 * The version number 2.0 is used (at least) by the
+		 * MusicQuest cards and the Roland Super-MPU.
+		 *
+		 * MusicQuest has given a special meaning to the bits of the
+		 * revision number. The Super-MPU returns 0.
+		 */
+
+		if (devc->revision)
+			timer_caps |= TMR_EXTERNAL | TMR_MODE_MIDI;
+
+		if (devc->revision & 0x02)
+			timer_caps |= TMR_MODE_CLS;
+
+
+		if (devc->revision & 0x40)
+			max_timebase = 10;	/* Has the 216 and 240 ppqn modes */
+	}
+
+	timer_mode = (TMR_INTERNAL | TMR_MODE_MIDI) & timer_caps;
+	return n;
+
+}
+
+EXPORT_SYMBOL(probe_mpu401);
+EXPORT_SYMBOL(attach_mpu401);
+EXPORT_SYMBOL(unload_mpu401);
+EXPORT_SYMBOL(intchk_mpu401);
+EXPORT_SYMBOL(mpuintr);
+
+static struct address_info cfg;
+
+static int io = -1;
+static int irq = -1;
+
+module_param(irq, int, 0);
+module_param(io, int, 0);
+
+static int __init init_mpu401(void)
+{
+	int ret;
+	/* Can be loaded either for module use or to provide functions
+	   to others */
+	if (io != -1 && irq != -1) {
+		struct resource *ports;
+	        cfg.irq = irq;
+		cfg.io_base = io;
+		ports = request_region(io, 2, "mpu401");
+		if (!ports)
+			return -EBUSY;
+		if (probe_mpu401(&cfg, ports) == 0) {
+			release_region(io, 2);
+			return -ENODEV;
+		}
+		if ((ret = attach_mpu401(&cfg, THIS_MODULE)))
+			return ret;
+	}
+	
+	return 0;
+}
+
+static void __exit cleanup_mpu401(void)
+{
+	if (io != -1 && irq != -1) {
+		/* Check for use by, for example, sscape driver */
+		unload_mpu401(&cfg);
+	}
+}
+
+module_init(init_mpu401);
+module_exit(cleanup_mpu401);
+
+#ifndef MODULE
+static int __init setup_mpu401(char *str)
+{
+        /* io, irq */
+	int ints[3];
+	
+	str = get_options(str, ARRAY_SIZE(ints), ints);
+	
+	io = ints[1];
+	irq = ints[2];
+
+	return 1;
+}
+
+__setup("mpu401=", setup_mpu401);
+#endif
+MODULE_LICENSE("GPL");