Merge branch 'pci/hotplug'
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state (Keith
Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and re-enumerate
devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets (Keith
Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable from
cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments (Keith
Busch)
* pci/hotplug:
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI/AER: Use threaded IRQ for bottom half
PCI/AER: Use kfifo_in_spinlocked() to insert locked elements
PCI/AER: Use kfifo for tracking events instead of reimplementing it
PCI/AER: Remove error source from AER struct aer_rpc
PCI/AER: Remove unused aer_error_resume()
PCI: Uninline PCI bus accessors for better ftracing
PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls
PCI: pnv_php: Use kmemdup()
PCI: cpqphp: Remove set but not used variable 'physical_slot'
PCI/ERR: Remove duplicated include from err.c
PCI: Equalize hotplug memory and io for occupied and empty slots
PCI / ACPI: Whitelist D3 for more PCIe hotplug ports
ACPI / property: Allow multiple property compatible _DSD entries
PCI/PME: Implement runtime PM callbacks
PCI: pciehp: Implement runtime PM callbacks
PCI/portdrv: Add runtime PM hooks for port service drivers
PCI/portdrv: Resume upon exit from system suspend if left runtime suspended
PCI: pciehp: Do not handle events if interrupts are masked
PCI: pciehp: Disable hotplug interrupt during suspend
PCI / ACPI: Enable wake automatically for power managed bridges
PCI: Do not skip power-managed bridges in pci_enable_wake()
PCI: Make link active reporting detection generic
PCI: Unify device inaccessible
PCI/ERR: Always report current recovery status for udev
PCI/ERR: Simplify broadcast callouts
PCI/ERR: Run error recovery callbacks for all affected devices
PCI/ERR: Handle fatal error recovery
PCI/ERR: Use slot reset if available
PCI/AER: Don't read upstream ports below fatal errors
PCI/AER: Take reference on error devices
PCI/DPC: Save and restore config state
PCI: portdrv: Restore PCI config state on slot reset
PCI: portdrv: Initialize service drivers directly
PCI: hotplug: Document TODOs
PCI: hotplug: Embed hotplug_slot
PCI: hotplug: Drop hotplug_slot_info
PCI: hotplug: Constify hotplug_slot_ops
PCI: pciehp: Reshuffle controller struct for clarity
PCI: pciehp: Rename controller struct members for clarity
PCI: pciehp: Unify controller and slot structs
PCI: pciehp: Tolerate Presence Detect hardwired to zero
PCI: pciehp: Drop hotplug_slot_ops wrappers
PCI: pciehp: Drop unnecessary includes
PCI: pciehp: Differentiate between surprise and safe removal
PCI: Simplify disconnected marking
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 0e2ea1c..bb85e2f 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -165,16 +165,15 @@ static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
/* Interface called from ACPI code to setup PCI host controller */
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
- int node = acpi_get_node(root->device->handle);
struct acpi_pci_generic_root_info *ri;
struct pci_bus *bus, *child;
struct acpi_pci_root_ops *root_ops;
- ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
+ ri = kzalloc(sizeof(*ri), GFP_KERNEL);
if (!ri)
return NULL;
- root_ops = kzalloc_node(sizeof(*root_ops), GFP_KERNEL, node);
+ root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
if (!root_ops) {
kfree(ri);
return NULL;
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 5559dca..9486560 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -356,7 +356,7 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
} else {
struct pci_root_info *info;
- info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
dev_err(&root->device->dev,
"pci_bus %04x:%02x: ignored (out of memory)\n",
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 7433035..707aafc 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -421,7 +421,8 @@ acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
}
EXPORT_SYMBOL(acpi_pci_osc_control_set);
-static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm)
+static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
+ bool is_pcie)
{
u32 support, control, requested;
acpi_status status;
@@ -455,9 +456,15 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm)
decode_osc_support(root, "OS supports", support);
status = acpi_pci_osc_support(root, support);
if (ACPI_FAILURE(status)) {
- dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
- acpi_format_exception(status));
*no_aspm = 1;
+
+ /* _OSC is optional for PCI host bridges */
+ if ((status == AE_NOT_FOUND) && !is_pcie)
+ return;
+
+ dev_info(&device->dev, "_OSC failed (%s)%s\n",
+ acpi_format_exception(status),
+ pcie_aspm_support_enabled() ? "; disabling ASPM" : "");
return;
}
@@ -533,6 +540,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
acpi_handle handle = device->handle;
int no_aspm = 0;
bool hotadd = system_state == SYSTEM_RUNNING;
+ bool is_pcie;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
@@ -590,7 +598,8 @@ static int acpi_pci_root_add(struct acpi_device *device,
root->mcfg_addr = acpi_pci_root_get_mcfg_addr(handle);
- negotiate_os_control(root, &no_aspm);
+ is_pcie = strcmp(acpi_device_hid(device), "PNP0A08") == 0;
+ negotiate_os_control(root, &no_aspm, is_pcie);
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c8d0549..79c8e95 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -792,10 +792,15 @@ static void pci_acpi_setup(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct acpi_device *adev = ACPI_COMPANION(dev);
+ int node;
if (!adev)
return;
+ node = acpi_get_node(adev->handle);
+ if (node != NUMA_NO_NODE)
+ set_dev_node(dev, node);
+
pci_acpi_optimize_delay(pci_dev, adev->handle);
pci_acpi_add_pm_notifier(adev, pci_dev);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e6fcf11..b309ce8 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1006,7 +1006,7 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
* because have already delayed for the bridge.
*/
if (dev->runtime_d3cold) {
- if (dev->d3cold_delay)
+ if (dev->d3cold_delay && !dev->imm_ready)
msleep(dev->d3cold_delay);
/*
* When powering on a bridge from D3cold, the
@@ -2660,6 +2660,7 @@ EXPORT_SYMBOL_GPL(pci_d3cold_disable);
void pci_pm_init(struct pci_dev *dev)
{
int pm;
+ u16 status;
u16 pmc;
pm_runtime_forbid(&dev->dev);
@@ -2722,6 +2723,10 @@ void pci_pm_init(struct pci_dev *dev)
/* Disable the PME# generation functionality */
pci_pme_active(dev, false);
}
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+ if (status & PCI_STATUS_IMM_READY)
+ dev->imm_ready = 1;
}
static unsigned long pci_ea_flags(struct pci_dev *dev, u8 prop)
@@ -4392,6 +4397,9 @@ int pcie_flr(struct pci_dev *dev)
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
+ if (dev->imm_ready)
+ return 0;
+
/*
* Per PCIe r4.0, sec 6.6.2, a device must complete an FLR within
* 100ms, but may silently discard requests while the FLR is in
@@ -4433,6 +4441,9 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
+ if (dev->imm_ready)
+ return 0;
+
/*
* Per Advanced Capabilities for Conventional PCI ECN, 13 April 2006,
* updated 27 July 2006; a device must complete an FLR within
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 53269167..dcb29cb 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -895,7 +895,7 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
struct pcie_link_state *link;
int blacklist = !!pcie_aspm_sanity_check(pdev);
- if (!aspm_support_enabled)
+ if (!aspm_support_enabled || aspm_disabled)
return;
if (pdev->link_state)
@@ -991,7 +991,7 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
* All PCIe functions are in one slot, remove one function will remove
* the whole slot, so just wait until we are the last function left.
*/
- if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices))
+ if (!list_empty(&parent->subordinate->devices))
goto out;
link = parent->link_state;
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 461e7fd2..e9c6b12 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -25,9 +25,6 @@ static void pci_stop_dev(struct pci_dev *dev)
pci_dev_assign_added(dev, false);
}
-
- if (dev->bus->self)
- pcie_aspm_exit_link_state(dev);
}
static void pci_destroy_dev(struct pci_dev *dev)
@@ -41,6 +38,7 @@ static void pci_destroy_dev(struct pci_dev *dev)
list_del(&dev->bus_list);
up_write(&pci_bus_sem);
+ pcie_aspm_exit_link_state(dev);
pci_bridge_d3_update(dev);
pci_free_resources(dev);
put_device(&dev->dev);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 896b420..45f6011 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -325,6 +325,7 @@ struct pci_dev {
pci_power_t current_state; /* Current operating state. In ACPI,
this is D0-D3, D0 being fully
functional, and D3 being off. */
+ unsigned int imm_ready:1; /* Supports Immediate Readiness */
u8 pm_cap; /* PM capability offset */
unsigned int pme_support:5; /* Bitmask of states from which PME#
can be generated */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index ee556cc..e1e9888 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -52,6 +52,7 @@
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
#define PCI_STATUS 0x06 /* 16 bits */
+#define PCI_STATUS_IMM_READY 0x01 /* Immediate Readiness */
#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
