// SPDX-License-Identifier: GPL-2.0
/*
 * dts file for Hisilicon Hi3670 SoC
 *
 * Copyright (C) 2016, Hisilicon Ltd.
 * Copyright (C) 2018, Linaro Ltd.
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi3670-clock.h>

/ {
	compatible = "hisilicon,hi3670";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&cpu0>;
				};
				core1 {
					cpu = <&cpu1>;
				};
				core2 {
					cpu = <&cpu2>;
				};
				core3 {
					cpu = <&cpu3>;
				};
			};
			cluster1 {
				core0 {
					cpu = <&cpu4>;
				};
				core1 {
					cpu = <&cpu5>;
				};
				core2 {
					cpu = <&cpu6>;
				};
				core3 {
					cpu = <&cpu7>;
				};
			};
		};

		cpu0: cpu@0 {
			compatible = "arm,cortex-a53", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x0>;
			enable-method = "psci";
		};

		cpu1: cpu@1 {
			compatible = "arm,cortex-a53", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x1>;
			enable-method = "psci";
		};

		cpu2: cpu@2 {
			compatible = "arm,cortex-a53", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x2>;
			enable-method = "psci";
		};

		cpu3: cpu@3 {
			compatible = "arm,cortex-a53", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x3>;
			enable-method = "psci";
		};

		cpu4: cpu@100 {
			compatible = "arm,cortex-a73", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x100>;
			enable-method = "psci";
		};

		cpu5: cpu@101 {
			compatible = "arm,cortex-a73", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x101>;
			enable-method = "psci";
		};

		cpu6: cpu@102 {
			compatible = "arm,cortex-a73", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x102>;
			enable-method = "psci";
		};

		cpu7: cpu@103 {
			compatible = "arm,cortex-a73", "arm,armv8";
			device_type = "cpu";
			reg = <0x0 0x103>;
			enable-method = "psci";
		};
	};

	gic: interrupt-controller@e82b0000 {
		compatible = "arm,gic-400";
		reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
		      <0x0 0xe82b2000 0 0x2000>, /* GICC */
		      <0x0 0xe82b4000 0 0x2000>, /* GICH */
		      <0x0 0xe82b6000 0 0x2000>; /* GICV */
		#interrupt-cells = <3>;
		#address-cells = <0>;
		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
					 IRQ_TYPE_LEVEL_HIGH)>;
		interrupt-controller;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupt-parent = <&gic>;
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
					  IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
					  IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
					  IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
					  IRQ_TYPE_LEVEL_LOW)>;
		clock-frequency = <1920000>;
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		crg_ctrl: crg_ctrl@fff35000 {
			compatible = "hisilicon,hi3670-crgctrl", "syscon";
			reg = <0x0 0xfff35000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		pctrl: pctrl@e8a09000 {
			compatible = "hisilicon,hi3670-pctrl", "syscon";
			reg = <0x0 0xe8a09000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		pmuctrl: crg_ctrl@fff34000 {
			compatible = "hisilicon,hi3670-pmuctrl", "syscon";
			reg = <0x0 0xfff34000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		sctrl: sctrl@fff0a000 {
			compatible = "hisilicon,hi3670-sctrl", "syscon";
			reg = <0x0 0xfff0a000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		iomcu: iomcu@ffd7e000 {
			compatible = "hisilicon,hi3670-iomcu", "syscon";
			reg = <0x0 0xffd7e000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		media1_crg: media1_crgctrl@e87ff000 {
			compatible = "hisilicon,hi3670-media1-crg", "syscon";
			reg = <0x0 0xe87ff000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		media2_crg: media2_crgctrl@e8900000 {
			compatible = "hisilicon,hi3670-media2-crg","syscon";
			reg = <0x0 0xe8900000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		uart0: serial@fdf02000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x0 0xfdf02000 0x0 0x1000>;
			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
				 <&crg_ctrl HI3670_PCLK>;
			clock-names = "uartclk", "apb_pclk";
			pinctrl-names = "default";
			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
			status = "disabled";
		};

		uart1: serial@fdf00000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x0 0xfdf00000 0x0 0x1000>;
			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>,
				 <&crg_ctrl HI3670_PCLK>;
			clock-names = "uartclk", "apb_pclk";
			pinctrl-names = "default";
			status = "disabled";
		};

		uart2: serial@fdf03000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x0 0xfdf03000 0x0 0x1000>;
			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&crg_ctrl HI3670_CLK_GATE_UART2>,
				 <&crg_ctrl HI3670_PCLK>;
			clock-names = "uartclk", "apb_pclk";
			pinctrl-names = "default";
			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
			status = "disabled";
		};

		uart3: serial@ffd74000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x0 0xffd74000 0x0 0x1000>;
			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&crg_ctrl HI3670_CLK_GATE_UART3>,
				 <&crg_ctrl HI3670_PCLK>;
			clock-names = "uartclk", "apb_pclk";
			pinctrl-names = "default";
			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
			status = "disabled";
		};

		uart4: serial@fdf01000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x0 0xfdf01000 0x0 0x1000>;
			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&crg_ctrl HI3670_CLK_GATE_UART4>,
				 <&crg_ctrl HI3670_PCLK>;
			clock-names = "uartclk", "apb_pclk";
			pinctrl-names = "default";
			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
			status = "disabled";
		};

		uart5: serial@fdf05000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x0 0xfdf05000 0x0 0x1000>;
			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>,
				 <&crg_ctrl HI3670_PCLK>;
			clock-names = "uartclk", "apb_pclk";
			pinctrl-names = "default";
			status = "disabled";
		};

		uart6: serial@fff32000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x0 0xfff32000 0x0 0x1000>;
			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&crg_ctrl HI3670_CLK_UART6>,
				 <&crg_ctrl HI3670_PCLK>;
			clock-names = "uartclk", "apb_pclk";
			pinctrl-names = "default";
			pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
			status = "disabled";
		};

		gpio0: gpio@e8a0b000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a0b000 0x0 0x1000>;
			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO0>;
			clock-names = "apb_pclk";
		};

		gpio1: gpio@e8a0c000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a0c000 0x0 0x1000>;
			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO1>;
			clock-names = "apb_pclk";
		};

		gpio2: gpio@e8a0d000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a0d000 0x0 0x1000>;
			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 1 6 7>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO2>;
			clock-names = "apb_pclk";
		};

		gpio3: gpio@e8a0e000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a0e000 0x0 0x1000>;
			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges =  <&pmx0 0 13 4 &pmx0 7 17 1>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
			clock-names = "apb_pclk";
		};

		gpio4: gpio@e8a0f000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a0f000 0x0 0x1000>;
			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 18 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO4>;
			clock-names = "apb_pclk";
		};

		gpio5: gpio@e8a10000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a10000 0x0 0x1000>;
			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 26 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO5>;
			clock-names = "apb_pclk";
		};

		gpio6: gpio@e8a11000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a11000 0x0 0x1000>;
			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 1 34 7>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO6>;
			clock-names = "apb_pclk";
		};

		gpio7: gpio@e8a12000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a12000 0x0 0x1000>;
			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 41 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO7>;
			clock-names = "apb_pclk";
		};

		gpio8: gpio@e8a13000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a13000 0x0 0x1000>;
			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 49 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO8>;
			clock-names = "apb_pclk";
		};

		gpio9: gpio@e8a14000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a14000 0x0 0x1000>;
			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 57 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO9>;
			clock-names = "apb_pclk";
		};

		gpio10: gpio@e8a15000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a15000 0x0 0x1000>;
			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 65 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO10>;
			clock-names = "apb_pclk";
		};

		gpio11: gpio@e8a16000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a16000 0x0 0x1000>;
			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 73 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO11>;
			clock-names = "apb_pclk";
		};

		gpio12: gpio@e8a17000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a17000 0x0 0x1000>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx0 0 81 1>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO12>;
			clock-names = "apb_pclk";
		};

		gpio13: gpio@e8a18000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a18000 0x0 0x1000>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO13>;
			clock-names = "apb_pclk";
		};

		gpio14: gpio@e8a19000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a19000 0x0 0x1000>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO14>;
			clock-names = "apb_pclk";
		};

		gpio15: gpio@e8a1a000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a1a000 0x0 0x1000>;
			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO15>;
			clock-names = "apb_pclk";
		};

		gpio16: gpio@e8a1b000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a1b000 0x0 0x1000>;
			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx5 0 0 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO16>;
			clock-names = "apb_pclk";
		};

		gpio17: gpio@e8a1c000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a1c000 0x0 0x1000>;
			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx5 0 8 2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO17>;
			clock-names = "apb_pclk";
		};

		gpio18: gpio@fff28000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff28000 0x0 0x1000>;
			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx1 4 42 4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_GPIO18>;
			clock-names = "apb_pclk";
		};

		gpio19: gpio@fff29000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff29000 0x0 0x1000>;
			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx1 0 61 2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_GPIO19>;
			clock-names = "apb_pclk";
		};

		gpio20: gpio@e8a1f000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a1f000 0x0 0x1000>;
			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx7 0 0 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO20>;
			clock-names = "apb_pclk";
		};

		gpio21: gpio@e8a20000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xe8a20000 0x0 0x1000>;
			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx7 0 8 4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&crg_ctrl HI3670_PCLK_GPIO21>;
			clock-names = "apb_pclk";
		};

		gpio22: gpio@fff0b000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff0b000 0x0 0x1000>;
			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			/* GPIO176 */
			gpio-ranges = <&pmx1 2 0 6>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_AO_GPIO0>;
			clock-names = "apb_pclk";
		};

		gpio23: gpio@fff0c000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff0c000 0x0 0x1000>;
			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			/* GPIO184 */
			gpio-ranges = <&pmx1 0 6 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_AO_GPIO1>;
			clock-names = "apb_pclk";
		};

		gpio24: gpio@fff0d000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff0d000 0x0 0x1000>;
			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			/* GPIO192 */
			gpio-ranges = <&pmx1 0 14 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_AO_GPIO2>;
			clock-names = "apb_pclk";
		};

		gpio25: gpio@fff0e000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff0e000 0x0 0x1000>;
			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			/* GPIO200 */
			gpio-ranges = <&pmx1 0 22 8>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_AO_GPIO3>;
			clock-names = "apb_pclk";
		};

		gpio26: gpio@fff0f000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff0f000 0x0 0x1000>;
			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			/* GPIO208 */
			gpio-ranges = <&pmx1 0 30 1>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_AO_GPIO4>;
			clock-names = "apb_pclk";
		};

		gpio27: gpio@fff10000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff10000 0x0 0x1000>;
			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			/* GPIO216 */
			gpio-ranges = <&pmx1 4 31 4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_AO_GPIO5>;
			clock-names = "apb_pclk";
		};

		gpio28: gpio@fff1d000 {
			compatible = "arm,pl061", "arm,primecell";
			reg = <0x0 0xfff1d000 0x0 0x1000>;
			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&pmx1 1 35 7>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
			clock-names = "apb_pclk";
		};
	};
};