# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm IPQ8074 TLMM pin controller

maintainers:
  - Bjorn Andersson <andersson@kernel.org>
  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

description:
  Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC.

properties:
  compatible:
    const: qcom,ipq8074-pinctrl

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true
  "#gpio-cells": true
  gpio-ranges: true
  wakeup-parent: true

  gpio-reserved-ranges:
    minItems: 1
    maxItems: 35

  gpio-line-names:
    maxItems: 70

patternProperties:
  "-state$":
    oneOf:
      - $ref: "#/$defs/qcom-ipq8074-tlmm-state"
      - patternProperties:
          "-pins$":
            $ref: "#/$defs/qcom-ipq8074-tlmm-state"
        additionalProperties: false

$defs:
  qcom-ipq8074-tlmm-state:
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.
    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state

    properties:
      pins:
        description:
          List of gpio pins affected by the properties specified in this
          subnode.
        items:
          pattern: "^gpio([0-9]|[1-6][0-9]|70)$"
        minItems: 1
        maxItems: 36

      function:
        description:
          Specify the alternative function to be configured for the specified
          pins.

        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
                atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
                audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
                audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
                blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
                blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
                blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
                blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
                blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0,
                cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0,
                led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2,
                mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst,
                pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx,
                pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0,
                pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
                qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
                qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
                tsens_max, wci2a, wci2b, wci2c, wci2d ]

      bias-pull-down: true
      bias-pull-up: true
      bias-disable: true
      drive-strength: true
      input-enable: true
      output-high: true
      output-low: true

    required:
      - pins

    additionalProperties: false

allOf:
  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    tlmm: pinctrl@1000000 {
        compatible = "qcom,ipq8074-pinctrl";
        reg = <0x01000000 0x300000>;
        gpio-controller;
        #gpio-cells = <0x2>;
        gpio-ranges = <&tlmm 0 0 70>;
        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-controller;
        #interrupt-cells = <0x2>;

        serial4-state {
            pins = "gpio23", "gpio24";
            function = "blsp4_uart1";
            drive-strength = <8>;
            bias-disable;
        };
    };