sysctl: parport remove binary paths
The sysctl binary paths don't look as if they even code work, .data is not
filled in, and all of the proc_handlers look at extra1 and there is not
strategy routine.
So just kill the binary paths.
In addition this patch removes the setting of extra1 on directories. It
doesn't look like the parport code ever examines it, and it's bad sysctl form.
[bunk@kernel.org: remove parport_device_num()]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/Documentation/parport-lowlevel.txt b/Documentation/parport-lowlevel.txt
index 8f23024..265fcdc 100644
--- a/Documentation/parport-lowlevel.txt
+++ b/Documentation/parport-lowlevel.txt
@@ -25,7 +25,6 @@
parport_open
parport_close
parport_device_id
- parport_device_num
parport_device_coords
parport_find_class
parport_find_device
@@ -735,7 +734,7 @@
SEE ALSO
-parport_register_device, parport_device_num
+parport_register_device
parport_close - unregister device for particular device number
-------------
@@ -787,29 +786,7 @@
SEE ALSO
-parport_find_class, parport_find_device, parport_device_num
-
-parport_device_num - convert device coordinates to device number
-------------------
-
-SYNOPSIS
-
-#include <linux/parport.h>
-
-int parport_device_num (int parport, int mux, int daisy);
-
-DESCRIPTION
-
-Convert between device coordinates (port, multiplexor, daisy chain
-address) and device number (zero-based).
-
-RETURN VALUE
-
-Device number, or -1 if no device at given coordinates.
-
-SEE ALSO
-
-parport_device_coords, parport_open, parport_device_id
+parport_find_class, parport_find_device
parport_device_coords - convert device number to device coordinates
------------------
@@ -833,7 +810,7 @@
SEE ALSO
-parport_device_num, parport_open, parport_device_id
+parport_open, parport_device_id
parport_find_class - find a device by its class
------------------
diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c
index ff9f344..5bbff20 100644
--- a/drivers/parport/daisy.c
+++ b/drivers/parport/daisy.c
@@ -275,35 +275,6 @@
parport_unregister_device(dev);
}
-/**
- * parport_device_num - convert device coordinates
- * @parport: parallel port number
- * @mux: multiplexor port number (-1 for no multiplexor)
- * @daisy: daisy chain address (-1 for no daisy chain address)
- *
- * This tries to locate a device on the given parallel port,
- * multiplexor port and daisy chain address, and returns its
- * device number or %-ENXIO if no device with those coordinates
- * exists.
- **/
-
-int parport_device_num(int parport, int mux, int daisy)
-{
- int res = -ENXIO;
- struct daisydev *dev;
-
- spin_lock(&topology_lock);
- dev = topology;
- while (dev && dev->port->portnum != parport &&
- dev->port->muxport != mux && dev->daisy != daisy)
- dev = dev->next;
- if (dev)
- res = dev->devnum;
- spin_unlock(&topology_lock);
-
- return res;
-}
-
/* Send a daisy-chain-style CPP command packet. */
static int cpp_daisy(struct parport *port, int cmd)
{
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index bdbdab9..ed82e41 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -237,7 +237,7 @@
#define PARPORT_PARPORT_DIR(CHILD) { .ctl_name = DEV_PARPORT, .procname = "parport", \
.mode = 0555, .child = CHILD }
#define PARPORT_DEV_DIR(CHILD) { .ctl_name = CTL_DEV, .procname = "dev", .mode = 0555, .child = CHILD }
-#define PARPORT_DEVICES_ROOT_DIR { .ctl_name = DEV_PARPORT_DEVICES, .procname = "devices", \
+#define PARPORT_DEVICES_ROOT_DIR { .procname = "devices", \
.mode = 0555, .child = NULL }
static const unsigned long parport_min_timeslice_value =
@@ -266,7 +266,6 @@
.sysctl_header = NULL,
{
{
- .ctl_name = DEV_PARPORT_SPINTIME,
.procname = "spintime",
.data = NULL,
.maxlen = sizeof(int),
@@ -276,7 +275,6 @@
.extra2 = (void*) &parport_max_spintime_value
},
{
- .ctl_name = DEV_PARPORT_BASE_ADDR,
.procname = "base-addr",
.data = NULL,
.maxlen = 0,
@@ -284,7 +282,6 @@
.proc_handler = &do_hardware_base_addr
},
{
- .ctl_name = DEV_PARPORT_IRQ,
.procname = "irq",
.data = NULL,
.maxlen = 0,
@@ -292,7 +289,6 @@
.proc_handler = &do_hardware_irq
},
{
- .ctl_name = DEV_PARPORT_DMA,
.procname = "dma",
.data = NULL,
.maxlen = 0,
@@ -300,7 +296,6 @@
.proc_handler = &do_hardware_dma
},
{
- .ctl_name = DEV_PARPORT_MODES,
.procname = "modes",
.data = NULL,
.maxlen = 0,
@@ -310,7 +305,6 @@
PARPORT_DEVICES_ROOT_DIR,
#ifdef CONFIG_PARPORT_1284
{
- .ctl_name = DEV_PARPORT_AUTOPROBE,
.procname = "autoprobe",
.data = NULL,
.maxlen = 0,
@@ -318,7 +312,6 @@
.proc_handler = &do_autoprobe
},
{
- .ctl_name = DEV_PARPORT_AUTOPROBE + 1,
.procname = "autoprobe0",
.data = NULL,
.maxlen = 0,
@@ -326,7 +319,6 @@
.proc_handler = &do_autoprobe
},
{
- .ctl_name = DEV_PARPORT_AUTOPROBE + 2,
.procname = "autoprobe1",
.data = NULL,
.maxlen = 0,
@@ -334,7 +326,6 @@
.proc_handler = &do_autoprobe
},
{
- .ctl_name = DEV_PARPORT_AUTOPROBE + 3,
.procname = "autoprobe2",
.data = NULL,
.maxlen = 0,
@@ -342,7 +333,6 @@
.proc_handler = &do_autoprobe
},
{
- .ctl_name = DEV_PARPORT_AUTOPROBE + 4,
.procname = "autoprobe3",
.data = NULL,
.maxlen = 0,
@@ -354,7 +344,6 @@
},
{
{
- .ctl_name = DEV_PARPORT_DEVICES_ACTIVE,
.procname = "active",
.data = NULL,
.maxlen = 0,
@@ -393,7 +382,6 @@
.sysctl_header = NULL,
{
{
- .ctl_name = DEV_PARPORT_DEVICE_TIMESLICE,
.procname = "timeslice",
.data = NULL,
.maxlen = sizeof(int),
@@ -449,7 +437,6 @@
.sysctl_header = NULL,
{
{
- .ctl_name = DEV_PARPORT_DEFAULT_TIMESLICE,
.procname = "timeslice",
.data = &parport_default_timeslice,
.maxlen = sizeof(parport_default_timeslice),
@@ -459,7 +446,6 @@
.extra2 = (void*) &parport_max_timeslice_value
},
{
- .ctl_name = DEV_PARPORT_DEFAULT_SPINTIME,
.procname = "spintime",
.data = &parport_default_spintime,
.maxlen = sizeof(parport_default_spintime),
@@ -502,7 +488,7 @@
t->device_dir[0].extra1 = port;
- for (i = 0; i < 8; i++)
+ for (i = 0; i < 5; i++)
t->vars[i].extra1 = port;
t->vars[0].data = &port->spintime;
@@ -512,7 +498,7 @@
t->vars[6 + i].extra2 = &port->probe_info[i];
t->port_dir[0].procname = port->name;
- t->port_dir[0].ctl_name = port->number + 1; /* nb 0 isn't legal here */
+ t->port_dir[0].ctl_name = 0;
t->port_dir[0].child = t->vars;
t->parport_dir[0].child = t->port_dir;
@@ -551,26 +537,12 @@
t->dev_dir[0].child = t->parport_dir;
t->parport_dir[0].child = t->port_dir;
t->port_dir[0].procname = port->name;
- t->port_dir[0].ctl_name = port->number + 1; /* nb 0 isn't legal here */
+ t->port_dir[0].ctl_name = 0;
t->port_dir[0].child = t->devices_root_dir;
t->devices_root_dir[0].child = t->device_dir;
-#ifdef CONFIG_PARPORT_1284
-
- t->device_dir[0].ctl_name =
- parport_device_num(port->number, port->muxport,
- device->daisy)
- + 1; /* nb 0 isn't legal here */
-
-#else /* No IEEE 1284 support */
-
- /* parport_device_num isn't available. */
- t->device_dir[0].ctl_name = 1;
-
-#endif /* IEEE 1284 support or not */
-
+ t->device_dir[0].ctl_name = 0;
t->device_dir[0].procname = device->name;
- t->device_dir[0].extra1 = device;
t->device_dir[0].child = t->vars;
t->vars[0].data = &device->timeslice;
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 9cdd694..ec3f765 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -510,7 +510,6 @@
int flags, void *handle);
extern void parport_close (struct pardevice *dev);
extern ssize_t parport_device_id (int devnum, char *buffer, size_t len);
-extern int parport_device_num (int parport, int mux, int daisy);
extern void parport_daisy_deselect_all (struct parport *port);
extern int parport_daisy_select (struct parport *port, int daisy, int mode);
