Merge tag 'md-3.6' of git://neil.brown.name/md
Pull additional md update from NeilBrown:
"This contains a few patches that depend on plugging changes in the
block layer so needed to wait for those.
It also contains a Kconfig fix for the new RAID10 support in dm-raid."
* tag 'md-3.6' of git://neil.brown.name/md:
md/dm-raid: DM_RAID should select MD_RAID10
md/raid1: submit IO from originating thread instead of md thread.
raid5: raid5d handle stripe in batch way
raid5: make_request use batch stripe release
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 1eee45b..d949b78 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -268,13 +268,14 @@
needed for live data migration tools such as 'pvmove'.
config DM_RAID
- tristate "RAID 1/4/5/6 target"
+ tristate "RAID 1/4/5/6/10 target"
depends on BLK_DEV_DM
select MD_RAID1
+ select MD_RAID10
select MD_RAID456
select BLK_DEV_MD
---help---
- A dm target that supports RAID1, RAID4, RAID5 and RAID6 mappings
+ A dm target that supports RAID1, RAID10, RAID4, RAID5 and RAID6 mappings
A RAID-5 set of N drives with a capacity of C MB per drive provides
the capacity of C * (N - 1) MB, and protects against a failure
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 15dbe03..94e7f6b 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1305,7 +1305,7 @@
prepare_to_wait(&bitmap->overflow_wait, &__wait,
TASK_UNINTERRUPTIBLE);
spin_unlock_irq(&bitmap->counts.lock);
- io_schedule();
+ schedule();
finish_wait(&bitmap->overflow_wait, &__wait);
continue;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 9f7f8be..611b5f7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -944,6 +944,44 @@
pr_debug("%dB behind alloc failed, doing sync I/O\n", bio->bi_size);
}
+struct raid1_plug_cb {
+ struct blk_plug_cb cb;
+ struct bio_list pending;
+ int pending_cnt;
+};
+
+static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule)
+{
+ struct raid1_plug_cb *plug = container_of(cb, struct raid1_plug_cb,
+ cb);
+ struct mddev *mddev = plug->cb.data;
+ struct r1conf *conf = mddev->private;
+ struct bio *bio;
+
+ if (from_schedule) {
+ spin_lock_irq(&conf->device_lock);
+ bio_list_merge(&conf->pending_bio_list, &plug->pending);
+ conf->pending_count += plug->pending_cnt;
+ spin_unlock_irq(&conf->device_lock);
+ md_wakeup_thread(mddev->thread);
+ kfree(plug);
+ return;
+ }
+
+ /* we aren't scheduling, so we can do the write-out directly. */
+ bio = bio_list_get(&plug->pending);
+ bitmap_unplug(mddev->bitmap);
+ wake_up(&conf->wait_barrier);
+
+ while (bio) { /* submit pending writes */
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ generic_make_request(bio);
+ bio = next;
+ }
+ kfree(plug);
+}
+
static void make_request(struct mddev *mddev, struct bio * bio)
{
struct r1conf *conf = mddev->private;
@@ -957,6 +995,8 @@
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
struct md_rdev *blocked_rdev;
+ struct blk_plug_cb *cb;
+ struct raid1_plug_cb *plug = NULL;
int first_clone;
int sectors_handled;
int max_sectors;
@@ -1259,11 +1299,22 @@
mbio->bi_private = r1_bio;
atomic_inc(&r1_bio->remaining);
+
+ cb = blk_check_plugged(raid1_unplug, mddev, sizeof(*plug));
+ if (cb)
+ plug = container_of(cb, struct raid1_plug_cb, cb);
+ else
+ plug = NULL;
spin_lock_irqsave(&conf->device_lock, flags);
- bio_list_add(&conf->pending_bio_list, mbio);
- conf->pending_count++;
+ if (plug) {
+ bio_list_add(&plug->pending, mbio);
+ plug->pending_cnt++;
+ } else {
+ bio_list_add(&conf->pending_bio_list, mbio);
+ conf->pending_count++;
+ }
spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!mddev_check_plugged(mddev))
+ if (!plug)
md_wakeup_thread(mddev->thread);
}
/* Mustn't call r1_bio_write_done before this next test,
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 87a2d0b..adda94d 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -484,7 +484,8 @@
} else {
if (atomic_read(&sh->count)) {
BUG_ON(!list_empty(&sh->lru)
- && !test_bit(STRIPE_EXPANDING, &sh->state));
+ && !test_bit(STRIPE_EXPANDING, &sh->state)
+ && !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state));
} else {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
@@ -4010,6 +4011,62 @@
return sh;
}
+struct raid5_plug_cb {
+ struct blk_plug_cb cb;
+ struct list_head list;
+};
+
+static void raid5_unplug(struct blk_plug_cb *blk_cb, bool from_schedule)
+{
+ struct raid5_plug_cb *cb = container_of(
+ blk_cb, struct raid5_plug_cb, cb);
+ struct stripe_head *sh;
+ struct mddev *mddev = cb->cb.data;
+ struct r5conf *conf = mddev->private;
+
+ if (cb->list.next && !list_empty(&cb->list)) {
+ spin_lock_irq(&conf->device_lock);
+ while (!list_empty(&cb->list)) {
+ sh = list_first_entry(&cb->list, struct stripe_head, lru);
+ list_del_init(&sh->lru);
+ /*
+ * avoid race release_stripe_plug() sees
+ * STRIPE_ON_UNPLUG_LIST clear but the stripe
+ * is still in our list
+ */
+ smp_mb__before_clear_bit();
+ clear_bit(STRIPE_ON_UNPLUG_LIST, &sh->state);
+ __release_stripe(conf, sh);
+ }
+ spin_unlock_irq(&conf->device_lock);
+ }
+ kfree(cb);
+}
+
+static void release_stripe_plug(struct mddev *mddev,
+ struct stripe_head *sh)
+{
+ struct blk_plug_cb *blk_cb = blk_check_plugged(
+ raid5_unplug, mddev,
+ sizeof(struct raid5_plug_cb));
+ struct raid5_plug_cb *cb;
+
+ if (!blk_cb) {
+ release_stripe(sh);
+ return;
+ }
+
+ cb = container_of(blk_cb, struct raid5_plug_cb, cb);
+
+ if (cb->list.next == NULL)
+ INIT_LIST_HEAD(&cb->list);
+
+ if (!test_and_set_bit(STRIPE_ON_UNPLUG_LIST, &sh->state))
+ list_add_tail(&sh->lru, &cb->list);
+ else
+ release_stripe(sh);
+}
+
static void make_request(struct mddev *mddev, struct bio * bi)
{
struct r5conf *conf = mddev->private;
@@ -4138,8 +4195,7 @@
if ((bi->bi_rw & REQ_NOIDLE) &&
!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
- mddev_check_plugged(mddev);
- release_stripe(sh);
+ release_stripe_plug(mddev, sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
clear_bit(BIO_UPTODATE, &bi->bi_flags);
@@ -4537,6 +4593,30 @@
return handled;
}
+#define MAX_STRIPE_BATCH 8
+static int handle_active_stripes(struct r5conf *conf)
+{
+ struct stripe_head *batch[MAX_STRIPE_BATCH], *sh;
+ int i, batch_size = 0;
+
+ while (batch_size < MAX_STRIPE_BATCH &&
+ (sh = __get_priority_stripe(conf)) != NULL)
+ batch[batch_size++] = sh;
+
+ if (batch_size == 0)
+ return batch_size;
+ spin_unlock_irq(&conf->device_lock);
+
+ for (i = 0; i < batch_size; i++)
+ handle_stripe(batch[i]);
+
+ cond_resched();
+
+ spin_lock_irq(&conf->device_lock);
+ for (i = 0; i < batch_size; i++)
+ __release_stripe(conf, batch[i]);
+ return batch_size;
+}
/*
* This is our raid5 kernel thread.
@@ -4547,7 +4627,6 @@
*/
static void raid5d(struct mddev *mddev)
{
- struct stripe_head *sh;
struct r5conf *conf = mddev->private;
int handled;
struct blk_plug plug;
@@ -4561,6 +4640,7 @@
spin_lock_irq(&conf->device_lock);
while (1) {
struct bio *bio;
+ int batch_size;
if (
!list_empty(&conf->bitmap_list)) {
@@ -4584,21 +4664,16 @@
handled++;
}
- sh = __get_priority_stripe(conf);
-
- if (!sh)
+ batch_size = handle_active_stripes(conf);
+ if (!batch_size)
break;
- spin_unlock_irq(&conf->device_lock);
-
- handled++;
- handle_stripe(sh);
- release_stripe(sh);
- cond_resched();
+ handled += batch_size;
- if (mddev->flags & ~(1<<MD_CHANGE_PENDING))
+ if (mddev->flags & ~(1<<MD_CHANGE_PENDING)) {
+ spin_unlock_irq(&conf->device_lock);
md_check_recovery(mddev);
-
- spin_lock_irq(&conf->device_lock);
+ spin_lock_irq(&conf->device_lock);
+ }
}
pr_debug("%d stripes handled\n", handled);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 61dbb61..a9fc249 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -321,6 +321,7 @@
STRIPE_BIOFILL_RUN,
STRIPE_COMPUTE_RUN,
STRIPE_OPS_REQ_PENDING,
+ STRIPE_ON_UNPLUG_LIST,
};
/*
