# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mediatek HDMI Encoder

maintainers:
  - CK Hu <ck.hu@mediatek.com>
  - Jitao shi <jitao.shi@mediatek.com>

description: |
  The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
  its parallel input.

properties:
  compatible:
    enum:
      - mediatek,mt2701-hdmi
      - mediatek,mt7623-hdmi
      - mediatek,mt8167-hdmi
      - mediatek,mt8173-hdmi

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: Pixel Clock
      - description: HDMI PLL
      - description: Bit Clock
      - description: S/PDIF Clock

  clock-names:
    items:
      - const: pixel
      - const: pll
      - const: bclk
      - const: spdif

  phys:
    maxItems: 1

  phy-names:
    items:
      - const: hdmi

  mediatek,syscon-hdmi:
    $ref: '/schemas/types.yaml#/definitions/phandle-array'
    items:
      - items:
          - description: phandle to system configuration registers
          - description: register offset in the system configuration registers
    description: |
      phandle link and register offset to the system configuration registers.

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description: |
          Input port node. This port should be connected to a DPI output port.

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description: |
          Output port node. This port should be connected to the input port of a connector
          node that contains a ddc-i2c-bus property, or to the  input port of an attached
          bridge chip, such as a SlimPort transmitter.

    required:
      - port@0
      - port@1

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - phys
  - phy-names
  - mediatek,syscon-hdmi
  - ports

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/mt8173-clk.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    hdmi0: hdmi@14025000 {
        compatible = "mediatek,mt8173-hdmi";
        reg = <0x14025000 0x400>;
        interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
        clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
             <&mmsys CLK_MM_HDMI_PLLCK>,
             <&mmsys CLK_MM_HDMI_AUDIO>,
             <&mmsys CLK_MM_HDMI_SPDIF>;
        clock-names = "pixel", "pll", "bclk", "spdif";
        pinctrl-names = "default";
        pinctrl-0 = <&hdmi_pin>;
        phys = <&hdmi_phy>;
        phy-names = "hdmi";
        mediatek,syscon-hdmi = <&mmsys 0x900>;

        ports {
          #address-cells = <1>;
          #size-cells = <0>;

          port@0 {
            reg = <0>;

            hdmi0_in: endpoint {
              remote-endpoint = <&dpi0_out>;
            };
          };

          port@1 {
            reg = <1>;

            hdmi0_out: endpoint {
              remote-endpoint = <&hdmi_con_in>;
            };
          };
        };
    };

...