| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * I2C multiplexer |
| * |
| * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it> |
| * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it> |
| * |
| * This module supports the PCA954x and PCA984x series of I2C multiplexer/switch |
| * chips made by NXP Semiconductors. |
| * This includes the: |
| * PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547, |
| * PCA9548, PCA9846, PCA9847, PCA9848 and PCA9849. |
| * |
| * These chips are all controlled via the I2C bus itself, and all have a |
| * single 8-bit register. The upstream "parent" bus fans out to two, |
| * four, or eight downstream busses or channels; which of these |
| * are selected is determined by the chip type and register contents. A |
| * mux can select only one sub-bus at a time; a switch can select any |
| * combination simultaneously. |
| * |
| * Based on: |
| * pca954x.c from Kumar Gala <galak@kernel.crashing.org> |
| * Copyright (C) 2006 |
| * |
| * Based on: |
| * pca954x.c from Ken Harrenstien |
| * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) |
| * |
| * Based on: |
| * i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com> |
| * and |
| * pca9540.c from Jean Delvare <jdelvare@suse.de>. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-mux.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <dt-bindings/mux/mux.h> |
| |
| #define PCA954X_MAX_NCHANS 8 |
| |
| #define PCA954X_IRQ_OFFSET 4 |
| |
| enum pca_type { |
| pca_9540, |
| pca_9542, |
| pca_9543, |
| pca_9544, |
| pca_9545, |
| pca_9546, |
| pca_9547, |
| pca_9548, |
| pca_9846, |
| pca_9847, |
| pca_9848, |
| pca_9849, |
| }; |
| |
| struct chip_desc { |
| u8 nchans; |
| u8 enable; /* used for muxes only */ |
| u8 has_irq; |
| enum muxtype { |
| pca954x_ismux = 0, |
| pca954x_isswi |
| } muxtype; |
| struct i2c_device_identity id; |
| }; |
| |
| struct pca954x { |
| const struct chip_desc *chip; |
| |
| u8 last_chan; /* last register value */ |
| /* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */ |
| s32 idle_state; |
| |
| struct i2c_client *client; |
| |
| struct irq_domain *irq; |
| unsigned int irq_mask; |
| raw_spinlock_t lock; |
| }; |
| |
| /* Provide specs for the PCA954x types we know about */ |
| static const struct chip_desc chips[] = { |
| [pca_9540] = { |
| .nchans = 2, |
| .enable = 0x4, |
| .muxtype = pca954x_ismux, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9542] = { |
| .nchans = 2, |
| .enable = 0x4, |
| .has_irq = 1, |
| .muxtype = pca954x_ismux, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9543] = { |
| .nchans = 2, |
| .has_irq = 1, |
| .muxtype = pca954x_isswi, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9544] = { |
| .nchans = 4, |
| .enable = 0x4, |
| .has_irq = 1, |
| .muxtype = pca954x_ismux, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9545] = { |
| .nchans = 4, |
| .has_irq = 1, |
| .muxtype = pca954x_isswi, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9546] = { |
| .nchans = 4, |
| .muxtype = pca954x_isswi, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9547] = { |
| .nchans = 8, |
| .enable = 0x8, |
| .muxtype = pca954x_ismux, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9548] = { |
| .nchans = 8, |
| .muxtype = pca954x_isswi, |
| .id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, |
| }, |
| [pca_9846] = { |
| .nchans = 4, |
| .muxtype = pca954x_isswi, |
| .id = { |
| .manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, |
| .part_id = 0x10b, |
| }, |
| }, |
| [pca_9847] = { |
| .nchans = 8, |
| .enable = 0x8, |
| .muxtype = pca954x_ismux, |
| .id = { |
| .manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, |
| .part_id = 0x108, |
| }, |
| }, |
| [pca_9848] = { |
| .nchans = 8, |
| .muxtype = pca954x_isswi, |
| .id = { |
| .manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, |
| .part_id = 0x10a, |
| }, |
| }, |
| [pca_9849] = { |
| .nchans = 4, |
| .enable = 0x4, |
| .muxtype = pca954x_ismux, |
| .id = { |
| .manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, |
| .part_id = 0x109, |
| }, |
| }, |
| }; |
| |
| static const struct i2c_device_id pca954x_id[] = { |
| { "pca9540", pca_9540 }, |
| { "pca9542", pca_9542 }, |
| { "pca9543", pca_9543 }, |
| { "pca9544", pca_9544 }, |
| { "pca9545", pca_9545 }, |
| { "pca9546", pca_9546 }, |
| { "pca9547", pca_9547 }, |
| { "pca9548", pca_9548 }, |
| { "pca9846", pca_9846 }, |
| { "pca9847", pca_9847 }, |
| { "pca9848", pca_9848 }, |
| { "pca9849", pca_9849 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, pca954x_id); |
| |
| static const struct of_device_id pca954x_of_match[] = { |
| { .compatible = "nxp,pca9540", .data = &chips[pca_9540] }, |
| { .compatible = "nxp,pca9542", .data = &chips[pca_9542] }, |
| { .compatible = "nxp,pca9543", .data = &chips[pca_9543] }, |
| { .compatible = "nxp,pca9544", .data = &chips[pca_9544] }, |
| { .compatible = "nxp,pca9545", .data = &chips[pca_9545] }, |
| { .compatible = "nxp,pca9546", .data = &chips[pca_9546] }, |
| { .compatible = "nxp,pca9547", .data = &chips[pca_9547] }, |
| { .compatible = "nxp,pca9548", .data = &chips[pca_9548] }, |
| { .compatible = "nxp,pca9846", .data = &chips[pca_9846] }, |
| { .compatible = "nxp,pca9847", .data = &chips[pca_9847] }, |
| { .compatible = "nxp,pca9848", .data = &chips[pca_9848] }, |
| { .compatible = "nxp,pca9849", .data = &chips[pca_9849] }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, pca954x_of_match); |
| |
| /* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer() |
| for this as they will try to lock adapter a second time */ |
| static int pca954x_reg_write(struct i2c_adapter *adap, |
| struct i2c_client *client, u8 val) |
| { |
| union i2c_smbus_data dummy; |
| |
| return __i2c_smbus_xfer(adap, client->addr, client->flags, |
| I2C_SMBUS_WRITE, val, |
| I2C_SMBUS_BYTE, &dummy); |
| } |
| |
| static u8 pca954x_regval(struct pca954x *data, u8 chan) |
| { |
| /* We make switches look like muxes, not sure how to be smarter. */ |
| if (data->chip->muxtype == pca954x_ismux) |
| return chan | data->chip->enable; |
| else |
| return 1 << chan; |
| } |
| |
| static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan) |
| { |
| struct pca954x *data = i2c_mux_priv(muxc); |
| struct i2c_client *client = data->client; |
| u8 regval; |
| int ret = 0; |
| |
| regval = pca954x_regval(data, chan); |
| /* Only select the channel if its different from the last channel */ |
| if (data->last_chan != regval) { |
| ret = pca954x_reg_write(muxc->parent, client, regval); |
| data->last_chan = ret < 0 ? 0 : regval; |
| } |
| |
| return ret; |
| } |
| |
| static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan) |
| { |
| struct pca954x *data = i2c_mux_priv(muxc); |
| struct i2c_client *client = data->client; |
| s32 idle_state; |
| |
| idle_state = READ_ONCE(data->idle_state); |
| if (idle_state >= 0) |
| /* Set the mux back to a predetermined channel */ |
| return pca954x_select_chan(muxc, idle_state); |
| |
| if (idle_state == MUX_IDLE_DISCONNECT) { |
| /* Deselect active channel */ |
| data->last_chan = 0; |
| return pca954x_reg_write(muxc->parent, client, |
| data->last_chan); |
| } |
| |
| /* otherwise leave as-is */ |
| |
| return 0; |
| } |
| |
| static ssize_t idle_state_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct i2c_mux_core *muxc = i2c_get_clientdata(client); |
| struct pca954x *data = i2c_mux_priv(muxc); |
| |
| return sprintf(buf, "%d\n", READ_ONCE(data->idle_state)); |
| } |
| |
| static ssize_t idle_state_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct i2c_mux_core *muxc = i2c_get_clientdata(client); |
| struct pca954x *data = i2c_mux_priv(muxc); |
| int val; |
| int ret; |
| |
| ret = kstrtoint(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| |
| if (val != MUX_IDLE_AS_IS && val != MUX_IDLE_DISCONNECT && |
| (val < 0 || val >= data->chip->nchans)) |
| return -EINVAL; |
| |
| i2c_lock_bus(muxc->parent, I2C_LOCK_SEGMENT); |
| |
| WRITE_ONCE(data->idle_state, val); |
| /* |
| * Set the mux into a state consistent with the new |
| * idle_state. |
| */ |
| if (data->last_chan || val != MUX_IDLE_DISCONNECT) |
| ret = pca954x_deselect_mux(muxc, 0); |
| |
| i2c_unlock_bus(muxc->parent, I2C_LOCK_SEGMENT); |
| |
| return ret < 0 ? ret : count; |
| } |
| |
| static DEVICE_ATTR_RW(idle_state); |
| |
| static irqreturn_t pca954x_irq_handler(int irq, void *dev_id) |
| { |
| struct pca954x *data = dev_id; |
| unsigned long pending; |
| int ret, i; |
| |
| ret = i2c_smbus_read_byte(data->client); |
| if (ret < 0) |
| return IRQ_NONE; |
| |
| pending = (ret >> PCA954X_IRQ_OFFSET) & (BIT(data->chip->nchans) - 1); |
| for_each_set_bit(i, &pending, data->chip->nchans) |
| handle_nested_irq(irq_linear_revmap(data->irq, i)); |
| |
| return IRQ_RETVAL(pending); |
| } |
| |
| static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type) |
| { |
| if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static struct irq_chip pca954x_irq_chip = { |
| .name = "i2c-mux-pca954x", |
| .irq_set_type = pca954x_irq_set_type, |
| }; |
| |
| static int pca954x_irq_setup(struct i2c_mux_core *muxc) |
| { |
| struct pca954x *data = i2c_mux_priv(muxc); |
| struct i2c_client *client = data->client; |
| int c, irq; |
| |
| if (!data->chip->has_irq || client->irq <= 0) |
| return 0; |
| |
| raw_spin_lock_init(&data->lock); |
| |
| data->irq = irq_domain_add_linear(client->dev.of_node, |
| data->chip->nchans, |
| &irq_domain_simple_ops, data); |
| if (!data->irq) |
| return -ENODEV; |
| |
| for (c = 0; c < data->chip->nchans; c++) { |
| irq = irq_create_mapping(data->irq, c); |
| if (!irq) { |
| dev_err(&client->dev, "failed irq create map\n"); |
| return -EINVAL; |
| } |
| irq_set_chip_data(irq, data); |
| irq_set_chip_and_handler(irq, &pca954x_irq_chip, |
| handle_simple_irq); |
| } |
| |
| return 0; |
| } |
| |
| static void pca954x_cleanup(struct i2c_mux_core *muxc) |
| { |
| struct pca954x *data = i2c_mux_priv(muxc); |
| int c, irq; |
| |
| if (data->irq) { |
| for (c = 0; c < data->chip->nchans; c++) { |
| irq = irq_find_mapping(data->irq, c); |
| irq_dispose_mapping(irq); |
| } |
| irq_domain_remove(data->irq); |
| } |
| i2c_mux_del_adapters(muxc); |
| } |
| |
| static int pca954x_init(struct i2c_client *client, struct pca954x *data) |
| { |
| int ret; |
| |
| if (data->idle_state >= 0) |
| data->last_chan = pca954x_regval(data, data->idle_state); |
| else |
| data->last_chan = 0; /* Disconnect multiplexer */ |
| |
| ret = i2c_smbus_write_byte(client, data->last_chan); |
| if (ret < 0) |
| data->last_chan = 0; |
| |
| return ret; |
| } |
| |
| /* |
| * I2C init/probing/exit functions |
| */ |
| static int pca954x_probe(struct i2c_client *client) |
| { |
| const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| struct i2c_adapter *adap = client->adapter; |
| struct device *dev = &client->dev; |
| struct gpio_desc *gpio; |
| struct i2c_mux_core *muxc; |
| struct pca954x *data; |
| int num; |
| int ret; |
| |
| if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) |
| return -ENODEV; |
| |
| muxc = i2c_mux_alloc(adap, dev, PCA954X_MAX_NCHANS, sizeof(*data), 0, |
| pca954x_select_chan, pca954x_deselect_mux); |
| if (!muxc) |
| return -ENOMEM; |
| data = i2c_mux_priv(muxc); |
| |
| i2c_set_clientdata(client, muxc); |
| data->client = client; |
| |
| /* Reset the mux if a reset GPIO is specified. */ |
| gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(gpio)) |
| return PTR_ERR(gpio); |
| if (gpio) { |
| udelay(1); |
| gpiod_set_value_cansleep(gpio, 0); |
| /* Give the chip some time to recover. */ |
| udelay(1); |
| } |
| |
| data->chip = device_get_match_data(dev); |
| if (!data->chip) |
| data->chip = &chips[id->driver_data]; |
| |
| if (data->chip->id.manufacturer_id != I2C_DEVICE_ID_NONE) { |
| struct i2c_device_identity id; |
| |
| ret = i2c_get_device_id(client, &id); |
| if (ret && ret != -EOPNOTSUPP) |
| return ret; |
| |
| if (!ret && |
| (id.manufacturer_id != data->chip->id.manufacturer_id || |
| id.part_id != data->chip->id.part_id)) { |
| dev_warn(dev, "unexpected device id %03x-%03x-%x\n", |
| id.manufacturer_id, id.part_id, |
| id.die_revision); |
| return -ENODEV; |
| } |
| } |
| |
| data->idle_state = MUX_IDLE_AS_IS; |
| if (device_property_read_u32(dev, "idle-state", &data->idle_state)) { |
| if (device_property_read_bool(dev, "i2c-mux-idle-disconnect")) |
| data->idle_state = MUX_IDLE_DISCONNECT; |
| } |
| |
| /* |
| * Write the mux register at addr to verify |
| * that the mux is in fact present. This also |
| * initializes the mux to a channel |
| * or disconnected state. |
| */ |
| ret = pca954x_init(client, data); |
| if (ret < 0) { |
| dev_warn(dev, "probe failed\n"); |
| return -ENODEV; |
| } |
| |
| ret = pca954x_irq_setup(muxc); |
| if (ret) |
| goto fail_cleanup; |
| |
| /* Now create an adapter for each channel */ |
| for (num = 0; num < data->chip->nchans; num++) { |
| ret = i2c_mux_add_adapter(muxc, 0, num, 0); |
| if (ret) |
| goto fail_cleanup; |
| } |
| |
| if (data->irq) { |
| ret = devm_request_threaded_irq(dev, data->client->irq, |
| NULL, pca954x_irq_handler, |
| IRQF_ONESHOT | IRQF_SHARED, |
| "pca954x", data); |
| if (ret) |
| goto fail_cleanup; |
| } |
| |
| /* |
| * The attr probably isn't going to be needed in most cases, |
| * so don't fail completely on error. |
| */ |
| device_create_file(dev, &dev_attr_idle_state); |
| |
| dev_info(dev, "registered %d multiplexed busses for I2C %s %s\n", |
| num, data->chip->muxtype == pca954x_ismux |
| ? "mux" : "switch", client->name); |
| |
| return 0; |
| |
| fail_cleanup: |
| pca954x_cleanup(muxc); |
| return ret; |
| } |
| |
| static void pca954x_remove(struct i2c_client *client) |
| { |
| struct i2c_mux_core *muxc = i2c_get_clientdata(client); |
| |
| device_remove_file(&client->dev, &dev_attr_idle_state); |
| |
| pca954x_cleanup(muxc); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int pca954x_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct i2c_mux_core *muxc = i2c_get_clientdata(client); |
| struct pca954x *data = i2c_mux_priv(muxc); |
| int ret; |
| |
| ret = pca954x_init(client, data); |
| if (ret < 0) |
| dev_err(&client->dev, "failed to verify mux presence\n"); |
| |
| return ret; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(pca954x_pm, NULL, pca954x_resume); |
| |
| static struct i2c_driver pca954x_driver = { |
| .driver = { |
| .name = "pca954x", |
| .pm = &pca954x_pm, |
| .of_match_table = pca954x_of_match, |
| }, |
| .probe_new = pca954x_probe, |
| .remove = pca954x_remove, |
| .id_table = pca954x_id, |
| }; |
| |
| module_i2c_driver(pca954x_driver); |
| |
| MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); |
| MODULE_DESCRIPTION("PCA954x I2C mux/switch driver"); |
| MODULE_LICENSE("GPL v2"); |