| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * HMC425A and similar Gain Amplifiers |
| * |
| * Copyright 2020 Analog Devices Inc. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/slab.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/sysfs.h> |
| |
| enum hmc425a_type { |
| ID_HMC425A, |
| }; |
| |
| struct hmc425a_chip_info { |
| const char *name; |
| const struct iio_chan_spec *channels; |
| unsigned int num_channels; |
| unsigned int num_gpios; |
| int gain_min; |
| int gain_max; |
| int default_gain; |
| }; |
| |
| struct hmc425a_state { |
| struct mutex lock; /* protect sensor state */ |
| struct hmc425a_chip_info *chip_info; |
| struct gpio_descs *gpios; |
| enum hmc425a_type type; |
| u32 gain; |
| }; |
| |
| static int hmc425a_write(struct iio_dev *indio_dev, u32 value) |
| { |
| struct hmc425a_state *st = iio_priv(indio_dev); |
| DECLARE_BITMAP(values, BITS_PER_TYPE(value)); |
| |
| values[0] = value; |
| |
| gpiod_set_array_value_cansleep(st->gpios->ndescs, st->gpios->desc, |
| NULL, values); |
| return 0; |
| } |
| |
| static int hmc425a_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long m) |
| { |
| struct hmc425a_state *st = iio_priv(indio_dev); |
| int code, gain = 0; |
| int ret; |
| |
| mutex_lock(&st->lock); |
| switch (m) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| code = st->gain; |
| |
| switch (st->type) { |
| case ID_HMC425A: |
| gain = ~code * -500; |
| break; |
| } |
| |
| *val = gain / 1000; |
| *val2 = (gain % 1000) * 1000; |
| |
| ret = IIO_VAL_INT_PLUS_MICRO_DB; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| mutex_unlock(&st->lock); |
| |
| return ret; |
| }; |
| |
| static int hmc425a_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, |
| int val2, long mask) |
| { |
| struct hmc425a_state *st = iio_priv(indio_dev); |
| struct hmc425a_chip_info *inf = st->chip_info; |
| int code = 0, gain; |
| int ret; |
| |
| if (val < 0) |
| gain = (val * 1000) - (val2 / 1000); |
| else |
| gain = (val * 1000) + (val2 / 1000); |
| |
| if (gain > inf->gain_max || gain < inf->gain_min) |
| return -EINVAL; |
| |
| switch (st->type) { |
| case ID_HMC425A: |
| code = ~((abs(gain) / 500) & 0x3F); |
| break; |
| } |
| |
| mutex_lock(&st->lock); |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| st->gain = code; |
| |
| ret = hmc425a_write(indio_dev, st->gain); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| mutex_unlock(&st->lock); |
| |
| return ret; |
| } |
| |
| static int hmc425a_write_raw_get_fmt(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| return IIO_VAL_INT_PLUS_MICRO_DB; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info hmc425a_info = { |
| .read_raw = &hmc425a_read_raw, |
| .write_raw = &hmc425a_write_raw, |
| .write_raw_get_fmt = &hmc425a_write_raw_get_fmt, |
| }; |
| |
| #define HMC425A_CHAN(_channel) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .output = 1, \ |
| .indexed = 1, \ |
| .channel = _channel, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| } |
| |
| static const struct iio_chan_spec hmc425a_channels[] = { |
| HMC425A_CHAN(0), |
| }; |
| |
| /* Match table for of_platform binding */ |
| static const struct of_device_id hmc425a_of_match[] = { |
| { .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, hmc425a_of_match); |
| |
| static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { |
| [ID_HMC425A] = { |
| .name = "hmc425a", |
| .channels = hmc425a_channels, |
| .num_channels = ARRAY_SIZE(hmc425a_channels), |
| .num_gpios = 6, |
| .gain_min = -31500, |
| .gain_max = 0, |
| .default_gain = -0x40, /* set default gain -31.5db*/ |
| }, |
| }; |
| |
| static int hmc425a_probe(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev; |
| struct hmc425a_state *st; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| st->type = (uintptr_t)device_get_match_data(&pdev->dev); |
| |
| st->chip_info = &hmc425a_chip_info_tbl[st->type]; |
| indio_dev->num_channels = st->chip_info->num_channels; |
| indio_dev->channels = st->chip_info->channels; |
| indio_dev->name = st->chip_info->name; |
| st->gain = st->chip_info->default_gain; |
| |
| st->gpios = devm_gpiod_get_array(&pdev->dev, "ctrl", GPIOD_OUT_LOW); |
| if (IS_ERR(st->gpios)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(st->gpios), |
| "failed to get gpios\n"); |
| |
| if (st->gpios->ndescs != st->chip_info->num_gpios) { |
| dev_err(&pdev->dev, "%d GPIOs needed to operate\n", |
| st->chip_info->num_gpios); |
| return -ENODEV; |
| } |
| |
| ret = devm_regulator_get_enable(&pdev->dev, "vcc-supply"); |
| if (ret) |
| return ret; |
| |
| mutex_init(&st->lock); |
| |
| indio_dev->info = &hmc425a_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| return devm_iio_device_register(&pdev->dev, indio_dev); |
| } |
| |
| static struct platform_driver hmc425a_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = hmc425a_of_match, |
| }, |
| .probe = hmc425a_probe, |
| }; |
| module_platform_driver(hmc425a_driver); |
| |
| MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); |
| MODULE_DESCRIPTION("Analog Devices HMC425A and similar GPIO control Gain Amplifiers"); |
| MODULE_LICENSE("GPL v2"); |