icside: don't use hwif->hwif_data
* Move ecard_set_drvdata() from icside_probe() to icside_register_v{5,6}(),
then use state->ioc_base instead of hwif->hwif_data in icside_maskproc()
and icside_dma_test_irq().
While at it:
* Add sel field to struct icside_state, then use state->{sel,ioc_base}
instead of ->{select,config}_data in icside_dma_setup().
There should be no functional changes caused by this patch.
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 0614569..7439580 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -68,6 +68,7 @@
unsigned int enabled;
void __iomem *irq_port;
void __iomem *ioc_base;
+ unsigned int sel;
unsigned int type;
ide_hwif_t *hwif[2];
};
@@ -165,7 +166,8 @@
static void icside_maskproc(ide_drive_t *drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
- struct icside_state *state = hwif->hwif_data;
+ struct expansion_card *ec = ECARD_DEV(hwif->dev);
+ struct icside_state *state = ecard_get_drvdata(ec);
unsigned long flags;
local_irq_save(flags);
@@ -308,6 +310,7 @@
{
ide_hwif_t *hwif = HWIF(drive);
struct expansion_card *ec = ECARD_DEV(hwif->dev);
+ struct icside_state *state = ecard_get_drvdata(ec);
struct request *rq = hwif->hwgroup->rq;
unsigned int dma_mode;
@@ -331,7 +334,7 @@
/*
* Route the DMA signals to the correct interface.
*/
- writeb(hwif->select_data, hwif->config_data);
+ writeb(state->sel | hwif->channel, state->ioc_base);
/*
* Select the correct timing for this drive.
@@ -359,7 +362,8 @@
static int icside_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct icside_state *state = hwif->hwif_data;
+ struct expansion_card *ec = ECARD_DEV(hwif->dev);
+ struct icside_state *state = ecard_get_drvdata(ec);
return readb(state->irq_port +
(hwif->channel ?
@@ -472,6 +476,8 @@
state->hwif[0] = hwif;
+ ecard_set_drvdata(ec, state);
+
idx[0] = hwif->index;
ide_device_add(idx, NULL);
@@ -525,6 +531,7 @@
state->irq_port = easi_base;
state->ioc_base = ioc_base;
+ state->sel = sel;
/*
* Be on the safe side - disable interrupts
@@ -545,13 +552,7 @@
state->hwif[0] = hwif;
state->hwif[1] = mate;
- hwif->hwif_data = state;
- hwif->config_data = (unsigned long)ioc_base;
- hwif->select_data = sel;
-
- mate->hwif_data = state;
- mate->config_data = (unsigned long)ioc_base;
- mate->select_data = sel | 1;
+ ecard_set_drvdata(ec, state);
if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
d.init_dma = icside_dma_init;
@@ -627,10 +628,8 @@
break;
}
- if (ret == 0) {
- ecard_set_drvdata(ec, state);
+ if (ret == 0)
goto out;
- }
kfree(state);
release:
