ARM: 6311/2: mmci: work with only one irq
The DBx500 variants have only one IRQ line hooked up. Allow these (and
any other implementations which choose to use only one irq) to work by
directing the PIO interrupts also to the first IRQ line.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 87b4fc6..ed700a5 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -129,10 +129,26 @@
spin_lock(&host->lock);
}
+static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
+{
+ void __iomem *base = host->base;
+
+ if (host->singleirq) {
+ unsigned int mask0 = readl(base + MMCIMASK0);
+
+ mask0 &= ~MCI_IRQ1MASK;
+ mask0 |= mask;
+
+ writel(mask0, base + MMCIMASK0);
+ }
+
+ writel(mask, base + MMCIMASK1);
+}
+
static void mmci_stop_data(struct mmci_host *host)
{
writel(0, host->base + MMCIDATACTRL);
- writel(0, host->base + MMCIMASK1);
+ mmci_set_mask1(host, 0);
host->data = NULL;
}
@@ -198,7 +214,7 @@
writel(datactrl, base + MMCIDATACTRL);
writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
- writel(irqmask, base + MMCIMASK1);
+ mmci_set_mask1(host, irqmask);
}
static void
@@ -437,7 +453,7 @@
* "any data available" mode.
*/
if (status & MCI_RXACTIVE && host->size < variant->fifosize)
- writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);
+ mmci_set_mask1(host, MCI_RXDATAAVLBLMASK);
/*
* If we run out of data, disable the data IRQs; this
@@ -446,7 +462,7 @@
* stops us racing with our data end IRQ.
*/
if (host->size == 0) {
- writel(0, base + MMCIMASK1);
+ mmci_set_mask1(host, 0);
writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0);
}
@@ -469,6 +485,14 @@
struct mmc_data *data;
status = readl(host->base + MMCISTATUS);
+
+ if (host->singleirq) {
+ if (status & readl(host->base + MMCIMASK1))
+ mmci_pio_irq(irq, dev_id);
+
+ status &= ~MCI_IRQ1MASK;
+ }
+
status &= readl(host->base + MMCIMASK0);
writel(status, host->base + MMCICLEAR);
@@ -635,6 +659,7 @@
struct variant_data *variant = id->data;
struct mmci_host *host;
struct mmc_host *mmc;
+ unsigned int mask;
int ret;
/* must have platform data */
@@ -806,11 +831,17 @@
if (ret)
goto unmap;
- ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host);
- if (ret)
- goto irq0_free;
+ if (dev->irq[1] == NO_IRQ)
+ host->singleirq = true;
+ else {
+ ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
+ DRIVER_NAME " (pio)", host);
+ if (ret)
+ goto irq0_free;
+ }
- writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+ mask = MCI_IRQENABLE;
+ writel(mask, host->base + MMCIMASK0);
amba_set_drvdata(dev, mmc);
@@ -864,7 +895,8 @@
writel(0, host->base + MMCIDATACTRL);
free_irq(dev->irq[0], host);
- free_irq(dev->irq[1], host);
+ if (!host->singleirq)
+ free_irq(dev->irq[1], host);
if (host->gpio_wp != -ENOSYS)
gpio_free(host->gpio_wp);
