# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale i.MX6UL Touch Controller

maintainers:
  - Haibo Chen <haibo.chen@nxp.com>
  - Shawn Guo <shawnguo@kernel.org>
  - Sascha Hauer <s.hauer@pengutronix.de>

properties:
  compatible:
    const: fsl,imx6ul-tsc

  reg:
    items:
      - description: touch controller address
      - description: ADC2 address

  interrupts:
    items:
      - description: touch controller address
      - description: ADC2 address

  clocks:
    maxItems: 2

  clock-names:
    items:
      - const: tsc
      - const: adc

  xnur-gpios:
    maxItems: 1
    description:
      The X- gpio this controller connect to. This xnur-gpio returns to
      low once the finger leave the touch screen (The last touch event
      the touch controller capture).

  measure-delay-time:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      The value of measure delay time. Before X-axis or Y-axis measurement,
      the screen need some time before even potential distribution ready.
    default: 0xffff
    minimum: 0
    maximum: 0xffffff

  pre-charge-time:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      The touch screen need some time to precharge.
    default: 0xfff
    minimum: 0
    maximum: 0xffffffff

  touchscreen-average-samples:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: Number of data samples which are averaged for each read.
    enum: [ 1, 4, 8, 16, 32 ]

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - xnur-gpios

allOf:
  - $ref: touchscreen.yaml#

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/imx6ul-clock.h>
    #include <dt-bindings/gpio/gpio.h>
    touchscreen@2040000 {
        compatible = "fsl,imx6ul-tsc";
        reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clks IMX6UL_CLK_IPG>,
                 <&clks IMX6UL_CLK_ADC2>;
        clock-names = "tsc", "adc";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_tsc>;
        xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
        measure-delay-time = <0xfff>;
        pre-charge-time = <0xffff>;
        touchscreen-average-samples = <32>;
    };