powerpc/32: Remove _ENTRY() macro
_ENTRY() is now redundant with _GLOBAL(). Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62a35f8dde2bb74c8d0d7a5430cce07a5a3a6fb6.1638273868.git.christophe.leroy@csgroup.eu
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index b6c6d1d..088f500 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -53,8 +53,8 @@
* This is all going to change RSN when we add bi_recs....... -- Dan
*/
__HEAD
-_ENTRY(_stext);
-_ENTRY(_start);
+_GLOBAL(_stext);
+_GLOBAL(_start);
mr r31,r3 /* save device tree ptr */
@@ -82,19 +82,19 @@
*/
. = 0xc0
crit_save:
-_ENTRY(crit_r10)
+_GLOBAL(crit_r10)
.space 4
-_ENTRY(crit_r11)
+_GLOBAL(crit_r11)
.space 4
-_ENTRY(crit_srr0)
+_GLOBAL(crit_srr0)
.space 4
-_ENTRY(crit_srr1)
+_GLOBAL(crit_srr1)
.space 4
-_ENTRY(crit_r1)
+_GLOBAL(crit_r1)
.space 4
-_ENTRY(crit_dear)
+_GLOBAL(crit_dear)
.space 4
-_ENTRY(crit_esr)
+_GLOBAL(crit_esr)
.space 4
/*
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b73a564..f15cb9f 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -52,8 +52,8 @@
*
*/
__HEAD
-_ENTRY(_stext);
-_ENTRY(_start);
+_GLOBAL(_stext);
+_GLOBAL(_start);
/*
* Reserve a word at a fixed location to store the address
* of abatron_pteptrs
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 0d073b9..0b05f2b 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -53,8 +53,8 @@
#define PAGE_SHIFT_8M 23
__HEAD
-_ENTRY(_stext);
-_ENTRY(_start);
+_GLOBAL(_stext);
+_GLOBAL(_start);
/* MPC8xx
* This port was done on an MBX board with an 860. Right now I only
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 94f88dc8..519b606 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -50,13 +50,13 @@
mtspr SPRN_DBAT##n##L,RB
__HEAD
-_ENTRY(_stext);
+_GLOBAL(_stext);
/*
* _start is defined this way because the XCOFF loader in the OpenFirmware
* on the powermac expects the entry point to be a procedure descriptor.
*/
-_ENTRY(_start);
+_GLOBAL(_start);
/*
* These are here for legacy reasons, the kernel used to
* need to look like a coff function entry for the pmac
@@ -775,7 +775,7 @@
* r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
* on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
*/
-_ENTRY(copy_and_flush)
+_GLOBAL(copy_and_flush)
addi r5,r5,-4
addi r6,r6,-4
4: li r0,L1_CACHE_BYTES/4
@@ -1073,7 +1073,7 @@
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
-_ENTRY(update_bats)
+_GLOBAL(update_bats)
lis r4, 1f@h
ori r4, r4, 1f@l
tophys(r4, r4)
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index ac2b4dc..f0db4f5 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -54,8 +54,8 @@
*
*/
__HEAD
-_ENTRY(_stext);
-_ENTRY(_start);
+_GLOBAL(_stext);
+_GLOBAL(_start);
/*
* Reserve a word at a fixed location to store the address
* of abatron_pteptrs
@@ -154,7 +154,7 @@
* if needed
*/
-_ENTRY(__early_start)
+_GLOBAL(__early_start)
LOAD_REG_ADDR_PIC(r20, kernstart_virt_addr)
lwz r20,0(r20)
