nohz: Separate out irq exit and idle loop dyntick logic

The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 5d9d236..266c242 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -275,42 +275,17 @@
 }
 EXPORT_SYMBOL_GPL(get_cpu_iowait_time_us);
 
-/**
- * tick_nohz_stop_sched_tick - stop the idle tick from the idle task
- *
- * When the next event is more than a tick into the future, stop the idle tick
- * Called either from the idle loop or from irq_exit() when an idle period was
- * just interrupted by an interrupt which did not cause a reschedule.
- */
-void tick_nohz_stop_sched_tick(int inidle)
+static void tick_nohz_stop_sched_tick(struct tick_sched *ts)
 {
-	unsigned long seq, last_jiffies, next_jiffies, delta_jiffies, flags;
-	struct tick_sched *ts;
+	unsigned long seq, last_jiffies, next_jiffies, delta_jiffies;
 	ktime_t last_update, expires, now;
 	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
 	u64 time_delta;
 	int cpu;
 
-	local_irq_save(flags);
-
 	cpu = smp_processor_id();
 	ts = &per_cpu(tick_cpu_sched, cpu);
 
-	/*
-	 * Call to tick_nohz_start_idle stops the last_update_time from being
-	 * updated. Thus, it must not be called in the event we are called from
-	 * irq_exit() with the prior state different than idle.
-	 */
-	if (!inidle && !ts->inidle)
-		goto end;
-
-	/*
-	 * Set ts->inidle unconditionally. Even if the system did not
-	 * switch to NOHZ mode the cpu frequency governers rely on the
-	 * update of the idle time accounting in tick_nohz_start_idle().
-	 */
-	ts->inidle = 1;
-
 	now = tick_nohz_start_idle(cpu, ts);
 
 	/*
@@ -326,10 +301,10 @@
 	}
 
 	if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
-		goto end;
+		return;
 
 	if (need_resched())
-		goto end;
+		return;
 
 	if (unlikely(local_softirq_pending() && cpu_online(cpu))) {
 		static int ratelimit;
@@ -339,7 +314,7 @@
 			       (unsigned int) local_softirq_pending());
 			ratelimit++;
 		}
-		goto end;
+		return;
 	}
 
 	ts->idle_calls++;
@@ -471,10 +446,54 @@
 	ts->next_jiffies = next_jiffies;
 	ts->last_jiffies = last_jiffies;
 	ts->sleep_length = ktime_sub(dev->next_event, now);
-end:
-	if (inidle)
-		rcu_idle_enter();
-	local_irq_restore(flags);
+}
+
+/**
+ * tick_nohz_idle_enter - stop the idle tick from the idle task
+ *
+ * When the next event is more than a tick into the future, stop the idle tick
+ * Called when we start the idle loop.
+ * This also enters into RCU extended quiescent state so that this CPU doesn't
+ * need anymore to be part of any global grace period completion. This way
+ * the tick can be stopped safely as we don't need to report quiescent states.
+ */
+void tick_nohz_idle_enter(void)
+{
+	struct tick_sched *ts;
+
+	WARN_ON_ONCE(irqs_disabled());
+
+	local_irq_disable();
+
+	ts = &__get_cpu_var(tick_cpu_sched);
+	/*
+	 * set ts->inidle unconditionally. even if the system did not
+	 * switch to nohz mode the cpu frequency governers rely on the
+	 * update of the idle time accounting in tick_nohz_start_idle().
+	 */
+	ts->inidle = 1;
+	tick_nohz_stop_sched_tick(ts);
+	rcu_idle_enter();
+
+	local_irq_enable();
+}
+
+/**
+ * tick_nohz_irq_exit - update next tick event from interrupt exit
+ *
+ * When an interrupt fires while we are idle and it doesn't cause
+ * a reschedule, it may still add, modify or delete a timer, enqueue
+ * an RCU callback, etc...
+ * So we need to re-calculate and reprogram the next tick event.
+ */
+void tick_nohz_irq_exit(void)
+{
+	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
+
+	if (!ts->inidle)
+		return;
+
+	tick_nohz_stop_sched_tick(ts);
 }
 
 /**
@@ -516,11 +535,13 @@
 }
 
 /**
- * tick_nohz_restart_sched_tick - restart the idle tick from the idle task
+ * tick_nohz_idle_exit - restart the idle tick from the idle task
  *
  * Restart the idle tick when the CPU is woken up from idle
+ * This also exit the RCU extended quiescent state. The CPU
+ * can use RCU again after this function is called.
  */
-void tick_nohz_restart_sched_tick(void)
+void tick_nohz_idle_exit(void)
 {
 	int cpu = smp_processor_id();
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);