Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: dwc3: gadget: Clear wait flag on dequeue
usb: typec: Send uevent for num_altmodes update
usb: typec: Fix copy paste error for NVIDIA alt-mode description
usb: gadget: enable super speed plus
kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
usb: uas: Add PNY USB Portable SSD to unusual_uas
usb: gadget: configfs: Preserve function ordering after bind failure
usb: gadget: select CONFIG_CRC32
usb: gadget: core: change the comment for usb_gadget_connect
usb: gadget: configfs: Fix use-after-free issue with udc_name
usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
usb: usbip: vhci_hcd: protect shift size
USB: usblp: fix DMA to stack
USB: serial: iuu_phoenix: fix DMA from stack
USB: serial: option: add LongSung M5710 module support
USB: serial: option: add Quectel EM160R-GL
USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
usb: gadget: f_uac2: reset wMaxPacketSize
usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
...
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
index 388245b..148b3fb 100644
--- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -11,8 +11,12 @@
properties:
compatible:
- items:
+ oneOf:
- const: ti,j721e-usb
+ - const: ti,am64-usb
+ - items:
+ - const: ti,j721e-usb
+ - const: ti,am64-usb
reg:
description: module registers
diff --git a/MAINTAINERS b/MAINTAINERS
index 9758b33..04f0bb8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3883,7 +3883,7 @@
CADENCE USB3 DRD IP DRIVER
M: Peter Chen <peter.chen@nxp.com>
M: Pawel Laszczak <pawell@cadence.com>
-M: Roger Quadros <rogerq@ti.com>
+R: Roger Quadros <rogerq@kernel.org>
R: Aswath Govindraju <a-govindraju@ti.com>
L: linux-usb@vger.kernel.org
S: Maintained
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 9e12152..8b7bc10b 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -139,9 +139,13 @@
misc_pdev = of_find_device_by_node(args.np);
of_node_put(args.np);
- if (!misc_pdev || !platform_get_drvdata(misc_pdev))
+ if (!misc_pdev)
return ERR_PTR(-EPROBE_DEFER);
+ if (!platform_get_drvdata(misc_pdev)) {
+ put_device(&misc_pdev->dev);
+ return ERR_PTR(-EPROBE_DEFER);
+ }
data->dev = &misc_pdev->dev;
/*
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f52f1bc..7819057 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1895,6 +1895,10 @@
{ USB_DEVICE(0x04d8, 0xfd08),
.driver_info = IGNORE_DEVICE,
},
+
+ { USB_DEVICE(0x04d8, 0xf58b),
+ .driver_info = IGNORE_DEVICE,
+ },
#endif
/*Samsung phone in firmware update mode */
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 02d0cfd..508b1c3 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -465,13 +465,23 @@
if (!desc->resp_count || !--desc->resp_count)
goto out;
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto out;
+ }
+ if (test_bit(WDM_RESETTING, &desc->flags)) {
+ rv = -EIO;
+ goto out;
+ }
+
set_bit(WDM_RESPONDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
rv = usb_submit_urb(desc->response, GFP_KERNEL);
spin_lock_irq(&desc->iuspin);
if (rv) {
- dev_err(&desc->intf->dev,
- "usb_submit_urb failed with result %d\n", rv);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+ dev_err(&desc->intf->dev,
+ "usb_submit_urb failed with result %d\n", rv);
/* make sure the next notification trigger a submit */
clear_bit(WDM_RESPONDING, &desc->flags);
@@ -1027,9 +1037,9 @@
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
- kill_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
+ kill_urbs(desc);
mutex_unlock(&desc->wlock);
mutex_unlock(&desc->rlock);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 67cbd42..134dc20 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -274,8 +274,25 @@
#define usblp_reset(usblp)\
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
-#define usblp_hp_channel_change_request(usblp, channel, buffer) \
- usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
+static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel)
+{
+ u8 *buf;
+ int ret;
+
+ buf = kzalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST,
+ USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE,
+ channel, buf, 1);
+ if (ret == 0)
+ *new_channel = buf[0];
+
+ kfree(buf);
+
+ return ret;
+}
/*
* See the description for usblp_select_alts() below for the usage
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 60886a7..ad5a0f4 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1649,14 +1649,12 @@
urb->status = status;
/*
* This function can be called in task context inside another remote
- * coverage collection section, but KCOV doesn't support that kind of
+ * coverage collection section, but kcov doesn't support that kind of
* recursion yet. Only collect coverage in softirq context for now.
*/
- if (in_serving_softirq())
- kcov_remote_start_usb((u64)urb->dev->bus->busnum);
+ kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
urb->complete(urb);
- if (in_serving_softirq())
- kcov_remote_stop();
+ kcov_remote_stop_softirq();
usb_anchor_resume_wakeups(anchor);
atomic_dec(&urb->use_count);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 2f95f08..1b241f9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -285,6 +285,7 @@
/* Global USB2 PHY Vendor Control Register */
#define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25)
+#define DWC3_GUSB2PHYACC_DONE BIT(24)
#define DWC3_GUSB2PHYACC_BUSY BIT(23)
#define DWC3_GUSB2PHYACC_WRITE BIT(22)
#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 417e053..bdf1f98 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -754,7 +754,7 @@
ret = priv->drvdata->setup_regmaps(priv, base);
if (ret)
- return ret;
+ goto err_disable_clks;
if (priv->vbus) {
ret = regulator_enable(priv->vbus);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 78cb4db..ee44321 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1763,6 +1763,8 @@
list_for_each_entry_safe(r, t, &dep->started_list, list)
dwc3_gadget_move_cancelled_request(r);
+ dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE;
+
goto out;
}
}
@@ -2083,6 +2085,7 @@
static void dwc3_gadget_disable_irq(struct dwc3 *dwc);
static void __dwc3_gadget_stop(struct dwc3 *dwc);
+static int __dwc3_gadget_start(struct dwc3 *dwc);
static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
{
@@ -2145,6 +2148,8 @@
dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
dwc->ev_buf->length;
}
+ } else {
+ __dwc3_gadget_start(dwc);
}
ret = dwc3_gadget_run_stop(dwc, is_on, false);
@@ -2319,10 +2324,6 @@
}
dwc->gadget_driver = driver;
-
- if (pm_runtime_active(dwc->dev))
- __dwc3_gadget_start(dwc);
-
spin_unlock_irqrestore(&dwc->lock, flags);
return 0;
@@ -2348,13 +2349,6 @@
unsigned long flags;
spin_lock_irqsave(&dwc->lock, flags);
-
- if (pm_runtime_suspended(dwc->dev))
- goto out;
-
- __dwc3_gadget_stop(dwc);
-
-out:
dwc->gadget_driver = NULL;
spin_unlock_irqrestore(&dwc->lock, flags);
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index aa213c9..f23f4c9 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -7,6 +7,8 @@
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
*/
+#include <linux/delay.h>
+#include <linux/time64.h>
#include <linux/ulpi/regs.h>
#include "core.h"
@@ -17,14 +19,28 @@
DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
-static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
+#define DWC3_ULPI_BASE_DELAY DIV_ROUND_UP(NSEC_PER_SEC, 60000000L)
+
+static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read)
{
- unsigned int count = 1000;
+ unsigned long ns = 5L * DWC3_ULPI_BASE_DELAY;
+ unsigned int count = 10000;
u32 reg;
+ if (addr >= ULPI_EXT_VENDOR_SPECIFIC)
+ ns += DWC3_ULPI_BASE_DELAY;
+
+ if (read)
+ ns += DWC3_ULPI_BASE_DELAY;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ if (reg & DWC3_GUSB2PHYCFG_SUSPHY)
+ usleep_range(1000, 1200);
+
while (count--) {
+ ndelay(ns);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
- if (!(reg & DWC3_GUSB2PHYACC_BUSY))
+ if (reg & DWC3_GUSB2PHYACC_DONE)
return 0;
cpu_relax();
}
@@ -38,16 +54,10 @@
u32 reg;
int ret;
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (reg & DWC3_GUSB2PHYCFG_SUSPHY) {
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
- }
-
reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
- ret = dwc3_ulpi_busyloop(dwc);
+ ret = dwc3_ulpi_busyloop(dwc, addr, true);
if (ret)
return ret;
@@ -61,17 +71,11 @@
struct dwc3 *dwc = dev_get_drvdata(dev);
u32 reg;
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (reg & DWC3_GUSB2PHYCFG_SUSPHY) {
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
- }
-
reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
reg |= DWC3_GUSB2PHYACC_WRITE | val;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
- return dwc3_ulpi_busyloop(dwc);
+ return dwc3_ulpi_busyloop(dwc, addr, false);
}
static const struct ulpi_ops dwc3_ulpi_ops = {
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7e47e62..2d15257 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -265,6 +265,7 @@
depends on NET
select USB_U_ETHER
select USB_F_NCM
+ select CRC32
help
NCM is an advanced protocol for Ethernet encapsulation, allows
grouping of several ethernet frames into one USB transfer and
@@ -314,6 +315,7 @@
depends on NET
select USB_U_ETHER
select USB_F_EEM
+ select CRC32
help
CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
and therefore can be supported by more hardware. Technically ECM and
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c6d455f..1a556a6 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -392,8 +392,11 @@
spin_lock_irqsave(&cdev->lock, flags);
- if (cdev->deactivations == 0)
+ if (cdev->deactivations == 0) {
+ spin_unlock_irqrestore(&cdev->lock, flags);
status = usb_gadget_deactivate(cdev->gadget);
+ spin_lock_irqsave(&cdev->lock, flags);
+ }
if (status == 0)
cdev->deactivations++;
@@ -424,8 +427,11 @@
status = -EINVAL;
else {
cdev->deactivations--;
- if (cdev->deactivations == 0)
+ if (cdev->deactivations == 0) {
+ spin_unlock_irqrestore(&cdev->lock, flags);
status = usb_gadget_activate(cdev->gadget);
+ spin_lock_irqsave(&cdev->lock, flags);
+ }
}
spin_unlock_irqrestore(&cdev->lock, flags);
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 56051bb..36ffb43 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -221,9 +221,16 @@
static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page)
{
- char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name;
+ struct gadget_info *gi = to_gadget_info(item);
+ char *udc_name;
+ int ret;
- return sprintf(page, "%s\n", udc_name ?: "");
+ mutex_lock(&gi->lock);
+ udc_name = gi->composite.gadget_driver.udc_name;
+ ret = sprintf(page, "%s\n", udc_name ?: "");
+ mutex_unlock(&gi->lock);
+
+ return ret;
}
static int unregister_gadget(struct gadget_info *gi)
@@ -1248,9 +1255,9 @@
cfg = container_of(c, struct config_usb_cfg, c);
- list_for_each_entry_safe(f, tmp, &c->functions, list) {
+ list_for_each_entry_safe_reverse(f, tmp, &c->functions, list) {
- list_move_tail(&f->list, &cfg->func_list);
+ list_move(&f->list, &cfg->func_list);
if (f->unbind) {
dev_dbg(&gi->cdev.gadget->dev,
"unbind function '%s'/%p\n",
@@ -1536,7 +1543,7 @@
.suspend = configfs_composite_suspend,
.resume = configfs_composite_resume,
- .max_speed = USB_SPEED_SUPER,
+ .max_speed = USB_SPEED_SUPER_PLUS,
.driver = {
.owner = THIS_MODULE,
.name = "configfs-gadget",
@@ -1576,7 +1583,7 @@
gi->composite.unbind = configfs_do_nothing;
gi->composite.suspend = NULL;
gi->composite.resume = NULL;
- gi->composite.max_speed = USB_SPEED_SUPER;
+ gi->composite.max_speed = USB_SPEED_SUPER_PLUS;
spin_lock_init(&gi->spinlock);
mutex_init(&gi->lock);
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 64a4112..2f1eb2e 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1162,6 +1162,7 @@
printer_req_free(dev->in_ep, req);
}
+ usb_free_all_descriptors(f);
return ret;
}
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 3633df6..5d960b6 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -271,7 +271,7 @@
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1023),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 1,
};
@@ -280,7 +280,7 @@
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1024),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 4,
};
@@ -348,7 +348,7 @@
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1023),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 1,
};
@@ -357,7 +357,7 @@
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1024),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 4,
};
@@ -444,12 +444,28 @@
__le32 dRES;
} __packed;
-static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
+static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
struct usb_endpoint_descriptor *ep_desc,
- unsigned int factor, bool is_playback)
+ enum usb_device_speed speed, bool is_playback)
{
int chmask, srate, ssize;
- u16 max_packet_size;
+ u16 max_size_bw, max_size_ep;
+ unsigned int factor;
+
+ switch (speed) {
+ case USB_SPEED_FULL:
+ max_size_ep = 1023;
+ factor = 1000;
+ break;
+
+ case USB_SPEED_HIGH:
+ max_size_ep = 1024;
+ factor = 8000;
+ break;
+
+ default:
+ return -EINVAL;
+ }
if (is_playback) {
chmask = uac2_opts->p_chmask;
@@ -461,10 +477,12 @@
ssize = uac2_opts->c_ssize;
}
- max_packet_size = num_channels(chmask) * ssize *
+ max_size_bw = num_channels(chmask) * ssize *
DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
- ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size,
- le16_to_cpu(ep_desc->wMaxPacketSize)));
+ ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
+ max_size_ep));
+
+ return 0;
}
/* Use macro to overcome line length limitation */
@@ -670,10 +688,33 @@
}
/* Calculate wMaxPacketSize according to audio bandwidth */
- set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true);
- set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false);
- set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true);
- set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false);
+ ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL,
+ true);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
+
+ ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL,
+ false);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
+
+ ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH,
+ true);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
+
+ ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH,
+ false);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
if (EPOUT_EN(uac2_opts)) {
agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 31ea76a..c019f2b 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -45,9 +45,10 @@
#define UETH__VERSION "29-May-2008"
/* Experiments show that both Linux and Windows hosts allow up to 16k
- * frame sizes. Set the max size to 15k+52 to prevent allocating 32k
+ * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k
* blocks and still have efficient handling. */
-#define GETHER_MAX_ETH_FRAME_LEN 15412
+#define GETHER_MAX_MTU_SIZE 15412
+#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN)
struct eth_dev {
/* lock is held while accessing port_usb
@@ -786,7 +787,7 @@
/* MTU range: 14 - 15412 */
net->min_mtu = ETH_HLEN;
- net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+ net->max_mtu = GETHER_MAX_MTU_SIZE;
dev->gadget = g;
SET_NETDEV_DEV(net, &g->dev);
@@ -848,7 +849,7 @@
/* MTU range: 14 - 15412 */
net->min_mtu = ETH_HLEN;
- net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+ net->max_mtu = GETHER_MAX_MTU_SIZE;
return net;
}
diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c
index 59be2d8..e8033e5 100644
--- a/drivers/usb/gadget/legacy/acm_ms.c
+++ b/drivers/usb/gadget/legacy/acm_ms.c
@@ -200,8 +200,10 @@
struct usb_descriptor_header *usb_desc;
usb_desc = usb_otg_descriptor_alloc(gadget);
- if (!usb_desc)
+ if (!usb_desc) {
+ status = -ENOMEM;
goto fail_string_ids;
+ }
usb_otg_descriptor_init(gadget, usb_desc);
otg_desc[0] = usb_desc;
otg_desc[1] = NULL;
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 1a12aab..8c614bb 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -90,7 +90,7 @@
config USB_FSL_USB2
tristate "Freescale Highspeed USB DR Peripheral Controller"
- depends on FSL_SOC || ARCH_MXC
+ depends on FSL_SOC
help
Some of Freescale PowerPC and i.MX processors have a High Speed
Dual-Role(DR) USB controller, which supports device mode.
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index f5a7ce2..a21f222 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -23,7 +23,6 @@
obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
fsl_usb2_udc-y := fsl_udc_core.o
-fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o
obj-$(CONFIG_USB_TEGRA_XUDC) += tegra-xudc.o
obj-$(CONFIG_USB_M66592) += m66592-udc.o
obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 5b5cfeb..6a62bbd 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -659,8 +659,7 @@
*
* Enables the D+ (or potentially D-) pullup. The host will start
* enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered). This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
+ * is active (the link is powered).
*
* Returns zero on success, else negative errno.
*/
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index ab5e978..1a953f4 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -2118,9 +2118,21 @@
dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
set_link_state(dum_hcd);
break;
- default:
+ case USB_PORT_FEAT_ENABLE:
+ case USB_PORT_FEAT_C_ENABLE:
+ case USB_PORT_FEAT_C_SUSPEND:
+ /* Not allowed for USB-3 */
+ if (hcd->speed == HCD_USB3)
+ goto error;
+ fallthrough;
+ case USB_PORT_FEAT_C_CONNECTION:
+ case USB_PORT_FEAT_C_RESET:
dum_hcd->port_status &= ~(1 << wValue);
set_link_state(dum_hcd);
+ break;
+ default:
+ /* Disallow INDICATOR and C_OVER_CURRENT */
+ goto error;
}
break;
case GetHubDescriptor:
@@ -2281,18 +2293,17 @@
*/
dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
fallthrough;
+ case USB_PORT_FEAT_C_CONNECTION:
+ case USB_PORT_FEAT_C_RESET:
+ case USB_PORT_FEAT_C_ENABLE:
+ case USB_PORT_FEAT_C_SUSPEND:
+ /* Not allowed for USB-3, and ignored for USB-2 */
+ if (hcd->speed == HCD_USB3)
+ goto error;
+ break;
default:
- if (hcd->speed == HCD_USB3) {
- if ((dum_hcd->port_status &
- USB_SS_PORT_STAT_POWER) != 0) {
- dum_hcd->port_status |= (1 << wValue);
- }
- } else
- if ((dum_hcd->port_status &
- USB_PORT_STAT_POWER) != 0) {
- dum_hcd->port_status |= (1 << wValue);
- }
- set_link_state(dum_hcd);
+ /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */
+ goto error;
}
break;
case GetPortErrorCount:
diff --git a/drivers/usb/gadget/udc/fsl_mxc_udc.c b/drivers/usb/gadget/udc/fsl_mxc_udc.c
deleted file mode 100644
index 5a32199..0000000
--- a/drivers/usb/gadget/udc/fsl_mxc_udc.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * Description:
- * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
- * driver to function correctly on these systems.
- */
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fsl_devices.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "fsl_usb2_udc.h"
-
-static struct clk *mxc_ahb_clk;
-static struct clk *mxc_per_clk;
-static struct clk *mxc_ipg_clk;
-
-/* workaround ENGcm09152 for i.MX35 */
-#define MX35_USBPHYCTRL_OFFSET 0x600
-#define USBPHYCTRL_OTGBASE_OFFSET 0x8
-#define USBPHYCTRL_EVDO (1 << 23)
-
-int fsl_udc_clk_init(struct platform_device *pdev)
-{
- struct fsl_usb2_platform_data *pdata;
- unsigned long freq;
- int ret;
-
- pdata = dev_get_platdata(&pdev->dev);
-
- mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(mxc_ipg_clk)) {
- dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
- return PTR_ERR(mxc_ipg_clk);
- }
-
- mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
- if (IS_ERR(mxc_ahb_clk)) {
- dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
- return PTR_ERR(mxc_ahb_clk);
- }
-
- mxc_per_clk = devm_clk_get(&pdev->dev, "per");
- if (IS_ERR(mxc_per_clk)) {
- dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
- return PTR_ERR(mxc_per_clk);
- }
-
- clk_prepare_enable(mxc_ipg_clk);
- clk_prepare_enable(mxc_ahb_clk);
- clk_prepare_enable(mxc_per_clk);
-
- /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
- if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
- freq = clk_get_rate(mxc_per_clk);
- if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
- (freq < 59999000 || freq > 60001000)) {
- dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
- ret = -EINVAL;
- goto eclkrate;
- }
- }
-
- return 0;
-
-eclkrate:
- clk_disable_unprepare(mxc_ipg_clk);
- clk_disable_unprepare(mxc_ahb_clk);
- clk_disable_unprepare(mxc_per_clk);
- mxc_per_clk = NULL;
- return ret;
-}
-
-int fsl_udc_clk_finalize(struct platform_device *pdev)
-{
- struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
- int ret = 0;
-
- /* workaround ENGcm09152 for i.MX35 */
- if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- unsigned int v;
- struct resource *res = platform_get_resource
- (pdev, IORESOURCE_MEM, 0);
- void __iomem *phy_regs = ioremap(res->start +
- MX35_USBPHYCTRL_OFFSET, 512);
- if (!phy_regs) {
- dev_err(&pdev->dev, "ioremap for phy address fails\n");
- ret = -EINVAL;
- goto ioremap_err;
- }
-
- v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
- writel(v | USBPHYCTRL_EVDO,
- phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
-
- iounmap(phy_regs);
- }
-
-
-ioremap_err:
- /* ULPI transceivers don't need usbpll */
- if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
- clk_disable_unprepare(mxc_per_clk);
- mxc_per_clk = NULL;
- }
-
- return ret;
-}
-
-void fsl_udc_clk_release(void)
-{
- if (mxc_per_clk)
- clk_disable_unprepare(mxc_per_clk);
- clk_disable_unprepare(mxc_ahb_clk);
- clk_disable_unprepare(mxc_ipg_clk);
-}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 91ab81c..e869405 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4770,19 +4770,19 @@
{
unsigned long long timeout_ns;
- /* Prevent U1 if service interval is shorter than U1 exit latency */
- if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
- if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
- dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
- return USB3_LPM_DISABLED;
- }
- }
-
if (xhci->quirks & XHCI_INTEL_HOST)
timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
else
timeout_ns = udev->u1_params.sel;
+ /* Prevent U1 if service interval is shorter than U1 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+ dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
/* The U1 timeout is encoded in 1us intervals.
* Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
*/
@@ -4834,19 +4834,19 @@
{
unsigned long long timeout_ns;
- /* Prevent U2 if service interval is shorter than U2 exit latency */
- if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
- if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
- dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
- return USB3_LPM_DISABLED;
- }
- }
-
if (xhci->quirks & XHCI_INTEL_HOST)
timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
else
timeout_ns = udev->u2_params.sel;
+ /* Prevent U2 if service interval is shorter than U2 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+ dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
/* The U2 timeout is encoded in 256us intervals */
timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
/* If the necessary timeout value is bigger than what we can set in the
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 73ebfa6..c640f98 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -496,6 +496,9 @@
timeout = schedule_timeout(YUREX_WRITE_TIMEOUT);
finish_wait(&dev->waitq, &wait);
+ /* make sure URB is idle after timeout or (spurious) CMD_ACK */
+ usb_kill_urb(dev->cntl_urb);
+
mutex_unlock(&dev->io_mutex);
if (retval < 0) {
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index f1201d4..e8f06b4 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -532,23 +532,29 @@
struct device *dev = &port->dev;
int i;
int status;
- u8 rxcmd = IUU_UART_RX;
+ u8 *rxcmd;
struct iuu_private *priv = usb_get_serial_port_data(port);
if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
return -EIO;
+ rxcmd = kmalloc(1, GFP_KERNEL);
+ if (!rxcmd)
+ return -ENOMEM;
+
+ rxcmd[0] = IUU_UART_RX;
+
for (i = 0; i < 2; i++) {
- status = bulk_immediate(port, &rxcmd, 1);
+ status = bulk_immediate(port, rxcmd, 1);
if (status != IUU_OPERATION_OK) {
dev_dbg(dev, "%s - uart_flush_write error\n", __func__);
- return status;
+ goto out_free;
}
status = read_immediate(port, &priv->len, 1);
if (status != IUU_OPERATION_OK) {
dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
- return status;
+ goto out_free;
}
if (priv->len > 0) {
@@ -556,12 +562,16 @@
status = read_immediate(port, priv->buf, priv->len);
if (status != IUU_OPERATION_OK) {
dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
- return status;
+ goto out_free;
}
}
}
dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__);
iuu_led(port, 0, 0xF000, 0, 0xFF);
+
+out_free:
+ kfree(rxcmd);
+
return status;
}
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2c21e34..3fe9591 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1117,6 +1117,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) }, /* EM160R-GL */
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
@@ -2057,6 +2059,7 @@
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
.driver_info = RSVD(6) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 870e9cf..f9677a5 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -91,6 +91,13 @@
US_FL_BROKEN_FUA),
/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
+UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999,
+ "PNY",
+ "Pro Elite SSD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999,
"PNY",
"Pro Elite SSD",
diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig
index 187690f..60d375e 100644
--- a/drivers/usb/typec/altmodes/Kconfig
+++ b/drivers/usb/typec/altmodes/Kconfig
@@ -20,6 +20,6 @@
to enable support for VirtualLink devices with NVIDIA GPUs.
To compile this driver as a module, choose M here: the
- module will be called typec_displayport.
+ module will be called typec_nvidia.
endmenu
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index ebfd311..8f77669 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -766,6 +766,7 @@
return ret;
sysfs_notify(&partner->dev.kobj, NULL, "number_of_alternate_modes");
+ kobject_uevent(&partner->dev.kobj, KOBJ_CHANGE);
return 0;
}
@@ -923,6 +924,7 @@
return ret;
sysfs_notify(&plug->dev.kobj, NULL, "number_of_alternate_modes");
+ kobject_uevent(&plug->dev.kobj, KOBJ_CHANGE);
return 0;
}
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index cf37a59..46a25b8 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -207,10 +207,21 @@
pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp)
{
u8 msg[2] = { };
+ int ret;
msg[0] = PMC_USB_DP_HPD;
msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
+ /* Configure HPD first if HPD,IRQ comes together */
+ if (!IOM_PORT_HPD_ASSERTED(port->iom_status) &&
+ dp->status & DP_STATUS_IRQ_HPD &&
+ dp->status & DP_STATUS_HPD_STATE) {
+ msg[1] = PMC_USB_DP_HPD_LVL;
+ ret = pmc_usb_command(port, msg, sizeof(msg));
+ if (ret)
+ return ret;
+ }
+
if (dp->status & DP_STATUS_IRQ_HPD)
msg[1] = PMC_USB_DP_HPD_IRQ;
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 66cde5e..3209b5d 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -396,6 +396,8 @@
default:
usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
wValue);
+ if (wValue >= 32)
+ goto error;
vhci_hcd->port_status[rhport] &= ~(1 << wValue);
break;
}
diff --git a/include/linux/kcov.h b/include/linux/kcov.h
index a10e847..4e3037d 100644
--- a/include/linux/kcov.h
+++ b/include/linux/kcov.h
@@ -52,6 +52,25 @@
kcov_remote_start(kcov_remote_handle(KCOV_SUBSYSTEM_USB, id));
}
+/*
+ * The softirq flavor of kcov_remote_*() functions is introduced as a temporary
+ * work around for kcov's lack of nested remote coverage sections support in
+ * task context. Adding suport for nested sections is tracked in:
+ * https://bugzilla.kernel.org/show_bug.cgi?id=210337
+ */
+
+static inline void kcov_remote_start_usb_softirq(u64 id)
+{
+ if (in_serving_softirq())
+ kcov_remote_start_usb(id);
+}
+
+static inline void kcov_remote_stop_softirq(void)
+{
+ if (in_serving_softirq())
+ kcov_remote_stop();
+}
+
#else
static inline void kcov_task_init(struct task_struct *t) {}
@@ -66,6 +85,8 @@
}
static inline void kcov_remote_start_common(u64 id) {}
static inline void kcov_remote_start_usb(u64 id) {}
+static inline void kcov_remote_start_usb_softirq(u64 id) {}
+static inline void kcov_remote_stop_softirq(void) {}
#endif /* CONFIG_KCOV */
#endif /* _LINUX_KCOV_H */
