USB: ohci-nxp: Rename symbols from pnx4008 to nxp
Since this driver is compatible with several NXP devices, the driver was renamed
accordingly. This patch also changes the respective symbol names.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index 9edb75d..abf6361 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -87,11 +87,11 @@
changing its design without notice). In this case, you can call
i2c_new_probed_device() instead of i2c_new_device().
-Example (from the pnx4008 OHCI driver):
+Example (from the nxp OHCI driver):
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
-static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
+static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
(...)
struct i2c_adapter *i2c_adap;
@@ -100,7 +100,7 @@
(...)
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
- strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
+ strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4b011b7c..dba50de 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1052,7 +1052,7 @@
#ifdef CONFIG_ARCH_PNX4008
#include "ohci-nxp.c"
-#define PLATFORM_DRIVER usb_hcd_pnx4008_driver
+#define PLATFORM_DRIVER usb_hcd_nxp_driver
#endif
#ifdef CONFIG_ARCH_DAVINCI_DA8XX
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 0013db7..a12c6b4 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -1,7 +1,8 @@
/*
- * drivers/usb/host/ohci-pnx4008.c
+ * driver for NXP USB Host devices
*
- * driver for Philips PNX4008 USB Host
+ * Currently supported OHCI host devices:
+ * - Philips PNX4008
*
* Authors: Dmitry Chigirev <source@mvista.com>
* Vitaly Wool <vitalywool@gmail.com>
@@ -121,13 +122,13 @@
}
static const struct i2c_device_id isp1301_id[] = {
- { "isp1301_pnx", 0 },
+ { "isp1301_nxp", 0 },
{ }
};
static struct i2c_driver isp1301_driver = {
.driver = {
- .name = "isp1301_pnx",
+ .name = "isp1301_nxp",
},
.probe = isp1301_probe,
.remove = isp1301_remove,
@@ -180,14 +181,14 @@
ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
}
-static void pnx4008_start_hc(void)
+static void nxp_start_hc(void)
{
unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
isp1301_vbus_on();
}
-static void pnx4008_stop_hc(void)
+static void nxp_stop_hc(void)
{
unsigned long tmp;
isp1301_vbus_off();
@@ -195,7 +196,7 @@
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
}
-static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd)
+static int __devinit ohci_nxp_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
@@ -211,9 +212,9 @@
return 0;
}
-static const struct hc_driver ohci_pnx4008_hc_driver = {
+static const struct hc_driver ohci_nxp_hc_driver = {
.description = hcd_name,
- .product_desc = "pnx4008 OHCI",
+ .product_desc = "nxp OHCI",
/*
* generic hardware linkage
@@ -225,7 +226,7 @@
/*
* basic lifecycle operations
*/
- .start = ohci_pnx4008_start,
+ .start = ohci_nxp_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
@@ -255,7 +256,7 @@
#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
-static void pnx4008_set_usb_bits(void)
+static void nxp_set_usb_bits(void)
{
start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
start_int_ack(SE_USB_OTG_ATX_INT_N);
@@ -282,7 +283,7 @@
start_int_umask(SE_USB_AHB_NEED_CLK_INT);
}
-static void pnx4008_unset_usb_bits(void)
+static void nxp_unset_usb_bits(void)
{
start_int_mask(SE_USB_OTG_ATX_INT_N);
start_int_mask(SE_USB_OTG_TIMER_INT);
@@ -292,17 +293,17 @@
start_int_mask(SE_USB_AHB_NEED_CLK_INT);
}
-static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
+static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd = 0;
struct ohci_hcd *ohci;
- const struct hc_driver *driver = &ohci_pnx4008_hc_driver;
+ const struct hc_driver *driver = &ohci_nxp_hc_driver;
struct i2c_adapter *i2c_adap;
struct i2c_board_info i2c_info;
int ret = 0, irq;
- dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (pnx4008)\n", hcd_name);
+ dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
if (usb_disabled()) {
err("USB is disabled");
ret = -ENODEV;
@@ -327,7 +328,7 @@
}
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
- strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
+ strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
@@ -375,7 +376,7 @@
}
/* Set all USB bits in the Start Enable register */
- pnx4008_set_usb_bits();
+ nxp_set_usb_bits();
hcd->rsrc_start = pdev->resource[0].start;
hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
@@ -392,7 +393,7 @@
goto out4;
}
- pnx4008_start_hc();
+ nxp_start_hc();
platform_set_drvdata(pdev, hcd);
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
@@ -402,9 +403,9 @@
if (ret == 0)
return ret;
- pnx4008_stop_hc();
+ nxp_stop_hc();
out4:
- pnx4008_unset_usb_bits();
+ nxp_unset_usb_bits();
usb_put_hcd(hcd);
out3:
clk_disable(usb_clk);
@@ -419,15 +420,15 @@
return ret;
}
-static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
+static int usb_hcd_nxp_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
- pnx4008_stop_hc();
+ nxp_stop_hc();
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- pnx4008_unset_usb_bits();
+ nxp_unset_usb_bits();
clk_disable(usb_clk);
clk_put(usb_clk);
i2c_unregister_device(isp1301_i2c_client);
@@ -442,12 +443,12 @@
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:usb-ohci");
-static struct platform_driver usb_hcd_pnx4008_driver = {
+static struct platform_driver usb_hcd_nxp_driver = {
.driver = {
.name = "usb-ohci",
.owner = THIS_MODULE,
},
- .probe = usb_hcd_pnx4008_probe,
- .remove = usb_hcd_pnx4008_remove,
+ .probe = usb_hcd_nxp_probe,
+ .remove = usb_hcd_nxp_remove,
};
