[PATCH] sata_sil24: separate out sil24_init_controller()
Separate out controller initialization from sil24_init_one() into
sil24_init_controller(). This will be used by resume.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 04ae1ef..1850c2e 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -988,6 +988,64 @@
kfree(hpriv);
}
+static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
+ unsigned long host_flags,
+ void __iomem *host_base,
+ void __iomem *port_base)
+{
+ u32 tmp;
+ int i;
+
+ /* GPIO off */
+ writel(0, host_base + HOST_FLASH_CMD);
+
+ /* clear global reset & mask interrupts during initialization */
+ writel(0, host_base + HOST_CTRL);
+
+ /* init ports */
+ for (i = 0; i < n_ports; i++) {
+ void __iomem *port = port_base + i * PORT_REGS_SIZE;
+
+ /* Initial PHY setting */
+ writel(0x20c, port + PORT_PHY_CFG);
+
+ /* Clear port RST */
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_PORT_RST) {
+ writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_PORT_RST,
+ PORT_CS_PORT_RST, 10, 100);
+ if (tmp & PORT_CS_PORT_RST)
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to clear port RST\n");
+ }
+
+ /* Configure IRQ WoC */
+ if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
+ else
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+ /* Zero error counters. */
+ writel(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writel(0x8000, port + PORT_CRC_ERR_THRESH);
+ writel(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writel(0x0000, port + PORT_DECODE_ERR_CNT);
+ writel(0x0000, port + PORT_CRC_ERR_CNT);
+ writel(0x0000, port + PORT_HSHK_ERR_CNT);
+
+ /* Always use 64bit activation */
+ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
+
+ /* Clear port multiplier enable and resume bits */
+ writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
+ }
+
+ /* Turn on interrupts */
+ writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
+}
+
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -1076,9 +1134,6 @@
}
}
- /* GPIO off */
- writel(0, host_base + HOST_FLASH_CMD);
-
/* Apply workaround for completion IRQ loss on PCI-X errata */
if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
tmp = readl(host_base + HOST_CTRL);
@@ -1090,56 +1145,18 @@
probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
}
- /* clear global reset & mask interrupts during initialization */
- writel(0, host_base + HOST_CTRL);
-
for (i = 0; i < probe_ent->n_ports; i++) {
- void __iomem *port = port_base + i * PORT_REGS_SIZE;
- unsigned long portu = (unsigned long)port;
+ unsigned long portu =
+ (unsigned long)port_base + i * PORT_REGS_SIZE;
probe_ent->port[i].cmd_addr = portu;
probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
ata_std_ports(&probe_ent->port[i]);
-
- /* Initial PHY setting */
- writel(0x20c, port + PORT_PHY_CFG);
-
- /* Clear port RST */
- tmp = readl(port + PORT_CTRL_STAT);
- if (tmp & PORT_CS_PORT_RST) {
- writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
- tmp = ata_wait_register(port + PORT_CTRL_STAT,
- PORT_CS_PORT_RST,
- PORT_CS_PORT_RST, 10, 100);
- if (tmp & PORT_CS_PORT_RST)
- dev_printk(KERN_ERR, &pdev->dev,
- "failed to clear port RST\n");
- }
-
- /* Configure IRQ WoC */
- if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
- writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
- else
- writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
-
- /* Zero error counters. */
- writel(0x8000, port + PORT_DECODE_ERR_THRESH);
- writel(0x8000, port + PORT_CRC_ERR_THRESH);
- writel(0x8000, port + PORT_HSHK_ERR_THRESH);
- writel(0x0000, port + PORT_DECODE_ERR_CNT);
- writel(0x0000, port + PORT_CRC_ERR_CNT);
- writel(0x0000, port + PORT_HSHK_ERR_CNT);
-
- /* Always use 64bit activation */
- writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
-
- /* Clear port multiplier enable and resume bits */
- writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
}
- /* Turn on interrupts */
- writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
+ sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
+ host_base, port_base);
pci_set_master(pdev);
