bindings: iio: pressure: Add documentation for dlh driver
Add a device tree binding documentation for DLH series pressure
sensors.
Signed-off-by: Tomislav Denis <tomislav.denis@avl.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
new file mode 100644
index 0000000..9f5ca9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: All Sensors DLH series low voltage digital pressure sensors
+
+maintainers:
+ - Tomislav Denis <tomislav.denis@avl.com>
+
+description: |
+ Bindings for the All Sensors DLH series pressure sensors.
+
+ Specifications about the sensors can be found at:
+ http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+
+properties:
+ compatible:
+ enum:
+ - asc,dlhl60d
+ - asc,dlhl60g
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ interrupts:
+ description: interrupt mapping for EOC(data ready) pin
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@29 {
+ compatible = "asc,dlhl60d";
+ reg = <0x29>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <10 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a47941..ec05a06 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -674,6 +674,7 @@
S: Maintained
L: linux-iio@vger.kernel.org
F: drivers/iio/pressure/dlhl60d.c
+F: Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
ALLEGRO DVT VIDEO IP CORE DRIVER
M: Michael Tretter <m.tretter@pengutronix.de>
