blob: 64d1fe6e9b9388b5046ee464a41a90954b085055 [file] [log] [blame]
###############
Timerlat tracer
###############
The timerlat tracer aims to help the preemptive kernel developers to
find sources of wakeup latencies of real-time threads. Like cyclictest,
the tracer sets a periodic timer that wakes up a thread. The thread then
computes a *wakeup latency* value as the difference between the *current
time* and the *absolute time* that the timer was set to expire. The main
goal of timerlat is tracing in such a way to help kernel developers.
Usage
-----
Write the ASCII text "timerlat" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
It is possible to follow the trace by reading the trace trace file::
[root@f32 tracing]# cat trace
# tracer: timerlat
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# || /
# |||| ACTIVATION
# TASK-PID CPU# |||| TIMESTAMP ID CONTEXT LATENCY
# | | | |||| | | | |
<idle>-0 [000] d.h1 54.029328: #1 context irq timer_latency 932 ns
<...>-867 [000] .... 54.029339: #1 context thread timer_latency 11700 ns
<idle>-0 [001] dNh1 54.029346: #1 context irq timer_latency 2833 ns
<...>-868 [001] .... 54.029353: #1 context thread timer_latency 9820 ns
<idle>-0 [000] d.h1 54.030328: #2 context irq timer_latency 769 ns
<...>-867 [000] .... 54.030330: #2 context thread timer_latency 3070 ns
<idle>-0 [001] d.h1 54.030344: #2 context irq timer_latency 935 ns
<...>-868 [001] .... 54.030347: #2 context thread timer_latency 4351 ns
The tracer creates a per-cpu kernel thread with real-time priority that
prints two lines at every activation. The first is the *timer latency*
observed at the *hardirq* context before the activation of the thread.
The second is the *timer latency* observed by the thread. The ACTIVATION
ID field serves to relate the *irq* execution to its respective *thread*
execution.
The *irq*/*thread* splitting is important to clarify in which context
the unexpected high value is coming from. The *irq* context can be
delayed by hardware-related actions, such as SMIs, NMIs, IRQs,
or by thread masking interrupts. Once the timer happens, the delay
can also be influenced by blocking caused by threads. For example, by
postponing the scheduler execution via preempt_disable(), scheduler
execution, or masking interrupts. Threads can also be delayed by the
interference from other threads and IRQs.
Tracer options
---------------------
The timerlat tracer is built on top of osnoise tracer.
So its configuration is also done in the osnoise/ config
directory. The timerlat configs are:
- cpus: CPUs at which a timerlat thread will execute.
- timerlat_period_us: the period of the timerlat thread.
- stop_tracing_us: stop the system tracing if a
timer latency at the *irq* context higher than the configured
value happens. Writing 0 disables this option.
- stop_tracing_total_us: stop the system tracing if a
timer latency at the *thread* context is higher than the configured
value happens. Writing 0 disables this option.
- print_stack: save the stack of the IRQ occurrence, and print
it after the *thread context* event".
timerlat and osnoise
----------------------------
The timerlat can also take advantage of the osnoise: traceevents.
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
[root@f32 tracing]# echo 1 > events/osnoise/enable
[root@f32 tracing]# echo 25 > osnoise/stop_tracing_total_us
[root@f32 tracing]# tail -10 trace
cc1-87882 [005] d..h... 548.771078: #402268 context irq timer_latency 13585 ns
cc1-87882 [005] dNLh1.. 548.771082: irq_noise: local_timer:236 start 548.771077442 duration 7597 ns
cc1-87882 [005] dNLh2.. 548.771099: irq_noise: qxl:21 start 548.771085017 duration 7139 ns
cc1-87882 [005] d...3.. 548.771102: thread_noise: cc1:87882 start 548.771078243 duration 9909 ns
timerlat/5-1035 [005] ....... 548.771104: #402268 context thread timer_latency 39960 ns
In this case, the root cause of the timer latency does not point to a
single cause but to multiple ones. Firstly, the timer IRQ was delayed
for 13 us, which may point to a long IRQ disabled section (see IRQ
stacktrace section). Then the timer interrupt that wakes up the timerlat
thread took 7597 ns, and the qxl:21 device IRQ took 7139 ns. Finally,
the cc1 thread noise took 9909 ns of time before the context switch.
Such pieces of evidence are useful for the developer to use other
tracing methods to figure out how to debug and optimize the system.
It is worth mentioning that the *duration* values reported
by the osnoise: events are *net* values. For example, the
thread_noise does not include the duration of the overhead caused
by the IRQ execution (which indeed accounted for 12736 ns). But
the values reported by the timerlat tracer (timerlat_latency)
are *gross* values.
The art below illustrates a CPU timeline and how the timerlat tracer
observes it at the top and the osnoise: events at the bottom. Each "-"
in the timelines means circa 1 us, and the time moves ==>::
External timer irq thread
clock latency latency
event 13585 ns 39960 ns
| ^ ^
v | |
|-------------| |
|-------------+-------------------------|
^ ^
========================================================================
[tmr irq] [dev irq]
[another thread...^ v..^ v.......][timerlat/ thread] <-- CPU timeline
=========================================================================
|-------| |-------|
|--^ v-------|
| | |
| | + thread_noise: 9909 ns
| +-> irq_noise: 6139 ns
+-> irq_noise: 7597 ns
IRQ stacktrace
---------------------------
The osnoise/print_stack option is helpful for the cases in which a thread
noise causes the major factor for the timer latency, because of preempt or
irq disabled. For example::
[root@f32 tracing]# echo 500 > osnoise/stop_tracing_total_us
[root@f32 tracing]# echo 500 > osnoise/print_stack
[root@f32 tracing]# echo timerlat > current_tracer
[root@f32 tracing]# tail -21 per_cpu/cpu7/trace
insmod-1026 [007] dN.h1.. 200.201948: irq_noise: local_timer:236 start 200.201939376 duration 7872 ns
insmod-1026 [007] d..h1.. 200.202587: #29800 context irq timer_latency 1616 ns
insmod-1026 [007] dN.h2.. 200.202598: irq_noise: local_timer:236 start 200.202586162 duration 11855 ns
insmod-1026 [007] dN.h3.. 200.202947: irq_noise: local_timer:236 start 200.202939174 duration 7318 ns
insmod-1026 [007] d...3.. 200.203444: thread_noise: insmod:1026 start 200.202586933 duration 838681 ns
timerlat/7-1001 [007] ....... 200.203445: #29800 context thread timer_latency 859978 ns
timerlat/7-1001 [007] ....1.. 200.203446: <stack trace>
=> timerlat_irq
=> __hrtimer_run_queues
=> hrtimer_interrupt
=> __sysvec_apic_timer_interrupt
=> asm_call_irq_on_stack
=> sysvec_apic_timer_interrupt
=> asm_sysvec_apic_timer_interrupt
=> delay_tsc
=> dummy_load_1ms_pd_init
=> do_one_initcall
=> do_init_module
=> __do_sys_finit_module
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
In this case, it is possible to see that the thread added the highest
contribution to the *timer latency* and the stack trace, saved during
the timerlat IRQ handler, points to a function named
dummy_load_1ms_pd_init, which had the following code (on purpose)::
static int __init dummy_load_1ms_pd_init(void)
{
preempt_disable();
mdelay(1);
preempt_enable();
return 0;
}