| .. SPDX-License-Identifier: GPL-2.0 |
| |
| ==== |
| L2TP |
| ==== |
| |
| Layer 2 Tunneling Protocol (L2TP) allows L2 frames to be tunneled over |
| an IP network. |
| |
| This document covers the kernel's L2TP subsystem. It documents kernel |
| APIs for application developers who want to use the L2TP subsystem and |
| it provides some technical details about the internal implementation |
| which may be useful to kernel developers and maintainers. |
| |
| Overview |
| ======== |
| |
| The kernel's L2TP subsystem implements the datapath for L2TPv2 and |
| L2TPv3. L2TPv2 is carried over UDP. L2TPv3 is carried over UDP or |
| directly over IP (protocol 115). |
| |
| The L2TP RFCs define two basic kinds of L2TP packets: control packets |
| (the "control plane"), and data packets (the "data plane"). The kernel |
| deals only with data packets. The more complex control packets are |
| handled by user space. |
| |
| An L2TP tunnel carries one or more L2TP sessions. Each tunnel is |
| associated with a socket. Each session is associated with a virtual |
| netdevice, e.g. ``pppN``, ``l2tpethN``, through which data frames pass |
| to/from L2TP. Fields in the L2TP header identify the tunnel or session |
| and whether it is a control or data packet. When tunnels and sessions |
| are set up using the Linux kernel API, we're just setting up the L2TP |
| data path. All aspects of the control protocol are to be handled by |
| user space. |
| |
| This split in responsibilities leads to a natural sequence of |
| operations when establishing tunnels and sessions. The procedure looks |
| like this: |
| |
| 1) Create a tunnel socket. Exchange L2TP control protocol messages |
| with the peer over that socket in order to establish a tunnel. |
| |
| 2) Create a tunnel context in the kernel, using information |
| obtained from the peer using the control protocol messages. |
| |
| 3) Exchange L2TP control protocol messages with the peer over the |
| tunnel socket in order to establish a session. |
| |
| 4) Create a session context in the kernel using information |
| obtained from the peer using the control protocol messages. |
| |
| L2TP APIs |
| ========= |
| |
| This section documents each userspace API of the L2TP subsystem. |
| |
| Tunnel Sockets |
| -------------- |
| |
| L2TPv2 always uses UDP. L2TPv3 may use UDP or IP encapsulation. |
| |
| To create a tunnel socket for use by L2TP, the standard POSIX |
| socket API is used. |
| |
| For example, for a tunnel using IPv4 addresses and UDP encapsulation:: |
| |
| int sockfd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); |
| |
| Or for a tunnel using IPv6 addresses and IP encapsulation:: |
| |
| int sockfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); |
| |
| UDP socket programming doesn't need to be covered here. |
| |
| IPPROTO_L2TP is an IP protocol type implemented by the kernel's L2TP |
| subsystem. The L2TPIP socket address is defined in struct |
| sockaddr_l2tpip and struct sockaddr_l2tpip6 at |
| `include/uapi/linux/l2tp.h`_. The address includes the L2TP tunnel |
| (connection) id. To use L2TP IP encapsulation, an L2TPv3 application |
| should bind the L2TPIP socket using the locally assigned |
| tunnel id. When the peer's tunnel id and IP address is known, a |
| connect must be done. |
| |
| If the L2TP application needs to handle L2TPv3 tunnel setup requests |
| from peers using L2TPIP, it must open a dedicated L2TPIP |
| socket to listen for those requests and bind the socket using tunnel |
| id 0 since tunnel setup requests are addressed to tunnel id 0. |
| |
| An L2TP tunnel and all of its sessions are automatically closed when |
| its tunnel socket is closed. |
| |
| Netlink API |
| ----------- |
| |
| L2TP applications use netlink to manage L2TP tunnel and session |
| instances in the kernel. The L2TP netlink API is defined in |
| `include/uapi/linux/l2tp.h`_. |
| |
| L2TP uses `Generic Netlink`_ (GENL). Several commands are defined: |
| Create, Delete, Modify and Get for tunnel and session |
| instances, e.g. ``L2TP_CMD_TUNNEL_CREATE``. The API header lists the |
| netlink attribute types that can be used with each command. |
| |
| Tunnel and session instances are identified by a locally unique |
| 32-bit id. L2TP tunnel ids are given by ``L2TP_ATTR_CONN_ID`` and |
| ``L2TP_ATTR_PEER_CONN_ID`` attributes and L2TP session ids are given |
| by ``L2TP_ATTR_SESSION_ID`` and ``L2TP_ATTR_PEER_SESSION_ID`` |
| attributes. If netlink is used to manage L2TPv2 tunnel and session |
| instances, the L2TPv2 16-bit tunnel/session id is cast to a 32-bit |
| value in these attributes. |
| |
| In the ``L2TP_CMD_TUNNEL_CREATE`` command, ``L2TP_ATTR_FD`` tells the |
| kernel the tunnel socket fd being used. If not specified, the kernel |
| creates a kernel socket for the tunnel, using IP parameters set in |
| ``L2TP_ATTR_IP[6]_SADDR``, ``L2TP_ATTR_IP[6]_DADDR``, |
| ``L2TP_ATTR_UDP_SPORT``, ``L2TP_ATTR_UDP_DPORT`` attributes. Kernel |
| sockets are used to implement unmanaged L2TPv3 tunnels (iproute2's "ip |
| l2tp" commands). If ``L2TP_ATTR_FD`` is given, it must be a socket fd |
| that is already bound and connected. There is more information about |
| unmanaged tunnels later in this document. |
| |
| ``L2TP_CMD_TUNNEL_CREATE`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID Y Sets the tunnel (connection) id. |
| PEER_CONN_ID Y Sets the peer tunnel (connection) id. |
| PROTO_VERSION Y Protocol version. 2 or 3. |
| ENCAP_TYPE Y Encapsulation type: UDP or IP. |
| FD N Tunnel socket file descriptor. |
| UDP_CSUM N Enable IPv4 UDP checksums. Used only if FD is |
| not set. |
| UDP_ZERO_CSUM6_TX N Zero IPv6 UDP checksum on transmit. Used only |
| if FD is not set. |
| UDP_ZERO_CSUM6_RX N Zero IPv6 UDP checksum on receive. Used only if |
| FD is not set. |
| IP_SADDR N IPv4 source address. Used only if FD is not |
| set. |
| IP_DADDR N IPv4 destination address. Used only if FD is |
| not set. |
| UDP_SPORT N UDP source port. Used only if FD is not set. |
| UDP_DPORT N UDP destination port. Used only if FD is not |
| set. |
| IP6_SADDR N IPv6 source address. Used only if FD is not |
| set. |
| IP6_DADDR N IPv6 destination address. Used only if FD is |
| not set. |
| DEBUG N Debug flags. |
| ================== ======== === |
| |
| ``L2TP_CMD_TUNNEL_DESTROY`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID Y Identifies the tunnel id to be destroyed. |
| ================== ======== === |
| |
| ``L2TP_CMD_TUNNEL_MODIFY`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID Y Identifies the tunnel id to be modified. |
| DEBUG N Debug flags. |
| ================== ======== === |
| |
| ``L2TP_CMD_TUNNEL_GET`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID N Identifies the tunnel id to be queried. |
| Ignored in DUMP requests. |
| ================== ======== === |
| |
| ``L2TP_CMD_SESSION_CREATE`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID Y The parent tunnel id. |
| SESSION_ID Y Sets the session id. |
| PEER_SESSION_ID Y Sets the parent session id. |
| PW_TYPE Y Sets the pseudowire type. |
| DEBUG N Debug flags. |
| RECV_SEQ N Enable rx data sequence numbers. |
| SEND_SEQ N Enable tx data sequence numbers. |
| LNS_MODE N Enable LNS mode (auto-enable data sequence |
| numbers). |
| RECV_TIMEOUT N Timeout to wait when reordering received |
| packets. |
| L2SPEC_TYPE N Sets layer2-specific-sublayer type (L2TPv3 |
| only). |
| COOKIE N Sets optional cookie (L2TPv3 only). |
| PEER_COOKIE N Sets optional peer cookie (L2TPv3 only). |
| IFNAME N Sets interface name (L2TPv3 only). |
| ================== ======== === |
| |
| For Ethernet session types, this will create an l2tpeth virtual |
| interface which can then be configured as required. For PPP session |
| types, a PPPoL2TP socket must also be opened and connected, mapping it |
| onto the new session. This is covered in "PPPoL2TP Sockets" later. |
| |
| ``L2TP_CMD_SESSION_DESTROY`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID Y Identifies the parent tunnel id of the session |
| to be destroyed. |
| SESSION_ID Y Identifies the session id to be destroyed. |
| IFNAME N Identifies the session by interface name. If |
| set, this overrides any CONN_ID and SESSION_ID |
| attributes. Currently supported for L2TPv3 |
| Ethernet sessions only. |
| ================== ======== === |
| |
| ``L2TP_CMD_SESSION_MODIFY`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID Y Identifies the parent tunnel id of the session |
| to be modified. |
| SESSION_ID Y Identifies the session id to be modified. |
| IFNAME N Identifies the session by interface name. If |
| set, this overrides any CONN_ID and SESSION_ID |
| attributes. Currently supported for L2TPv3 |
| Ethernet sessions only. |
| DEBUG N Debug flags. |
| RECV_SEQ N Enable rx data sequence numbers. |
| SEND_SEQ N Enable tx data sequence numbers. |
| LNS_MODE N Enable LNS mode (auto-enable data sequence |
| numbers). |
| RECV_TIMEOUT N Timeout to wait when reordering received |
| packets. |
| ================== ======== === |
| |
| ``L2TP_CMD_SESSION_GET`` attributes:- |
| |
| ================== ======== === |
| Attribute Required Use |
| ================== ======== === |
| CONN_ID N Identifies the tunnel id to be queried. |
| Ignored for DUMP requests. |
| SESSION_ID N Identifies the session id to be queried. |
| Ignored for DUMP requests. |
| IFNAME N Identifies the session by interface name. |
| If set, this overrides any CONN_ID and |
| SESSION_ID attributes. Ignored for DUMP |
| requests. Currently supported for L2TPv3 |
| Ethernet sessions only. |
| ================== ======== === |
| |
| Application developers should refer to `include/uapi/linux/l2tp.h`_ for |
| netlink command and attribute definitions. |
| |
| Sample userspace code using libmnl_: |
| |
| - Open L2TP netlink socket:: |
| |
| struct nl_sock *nl_sock; |
| int l2tp_nl_family_id; |
| |
| nl_sock = nl_socket_alloc(); |
| genl_connect(nl_sock); |
| genl_id = genl_ctrl_resolve(nl_sock, L2TP_GENL_NAME); |
| |
| - Create a tunnel:: |
| |
| struct nlmsghdr *nlh; |
| struct genlmsghdr *gnlh; |
| |
| nlh = mnl_nlmsg_put_header(buf); |
| nlh->nlmsg_type = genl_id; /* assigned to genl socket */ |
| nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; |
| nlh->nlmsg_seq = seq; |
| |
| gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); |
| gnlh->cmd = L2TP_CMD_TUNNEL_CREATE; |
| gnlh->version = L2TP_GENL_VERSION; |
| gnlh->reserved = 0; |
| |
| mnl_attr_put_u32(nlh, L2TP_ATTR_FD, tunl_sock_fd); |
| mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); |
| mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_CONN_ID, peer_tid); |
| mnl_attr_put_u8(nlh, L2TP_ATTR_PROTO_VERSION, protocol_version); |
| mnl_attr_put_u16(nlh, L2TP_ATTR_ENCAP_TYPE, encap); |
| |
| - Create a session:: |
| |
| struct nlmsghdr *nlh; |
| struct genlmsghdr *gnlh; |
| |
| nlh = mnl_nlmsg_put_header(buf); |
| nlh->nlmsg_type = genl_id; /* assigned to genl socket */ |
| nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; |
| nlh->nlmsg_seq = seq; |
| |
| gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); |
| gnlh->cmd = L2TP_CMD_SESSION_CREATE; |
| gnlh->version = L2TP_GENL_VERSION; |
| gnlh->reserved = 0; |
| |
| mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); |
| mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_CONN_ID, peer_tid); |
| mnl_attr_put_u32(nlh, L2TP_ATTR_SESSION_ID, sid); |
| mnl_attr_put_u32(nlh, L2TP_ATTR_PEER_SESSION_ID, peer_sid); |
| mnl_attr_put_u16(nlh, L2TP_ATTR_PW_TYPE, pwtype); |
| /* there are other session options which can be set using netlink |
| * attributes during session creation -- see l2tp.h |
| */ |
| |
| - Delete a session:: |
| |
| struct nlmsghdr *nlh; |
| struct genlmsghdr *gnlh; |
| |
| nlh = mnl_nlmsg_put_header(buf); |
| nlh->nlmsg_type = genl_id; /* assigned to genl socket */ |
| nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; |
| nlh->nlmsg_seq = seq; |
| |
| gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); |
| gnlh->cmd = L2TP_CMD_SESSION_DELETE; |
| gnlh->version = L2TP_GENL_VERSION; |
| gnlh->reserved = 0; |
| |
| mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); |
| mnl_attr_put_u32(nlh, L2TP_ATTR_SESSION_ID, sid); |
| |
| - Delete a tunnel and all of its sessions (if any):: |
| |
| struct nlmsghdr *nlh; |
| struct genlmsghdr *gnlh; |
| |
| nlh = mnl_nlmsg_put_header(buf); |
| nlh->nlmsg_type = genl_id; /* assigned to genl socket */ |
| nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; |
| nlh->nlmsg_seq = seq; |
| |
| gnlh = mnl_nlmsg_put_extra_header(nlh, sizeof(*gnlh)); |
| gnlh->cmd = L2TP_CMD_TUNNEL_DELETE; |
| gnlh->version = L2TP_GENL_VERSION; |
| gnlh->reserved = 0; |
| |
| mnl_attr_put_u32(nlh, L2TP_ATTR_CONN_ID, tid); |
| |
| PPPoL2TP Session Socket API |
| --------------------------- |
| |
| For PPP session types, a PPPoL2TP socket must be opened and connected |
| to the L2TP session. |
| |
| When creating PPPoL2TP sockets, the application provides information |
| to the kernel about the tunnel and session in a socket connect() |
| call. Source and destination tunnel and session ids are provided, as |
| well as the file descriptor of a UDP or L2TPIP socket. See struct |
| pppol2tp_addr in `include/linux/if_pppol2tp.h`_. For historical reasons, |
| there are unfortunately slightly different address structures for |
| L2TPv2/L2TPv3 IPv4/IPv6 tunnels and userspace must use the appropriate |
| structure that matches the tunnel socket type. |
| |
| Userspace may control behavior of the tunnel or session using |
| setsockopt and ioctl on the PPPoX socket. The following socket |
| options are supported:- |
| |
| ========= =========================================================== |
| DEBUG bitmask of debug message categories. See below. |
| SENDSEQ - 0 => don't send packets with sequence numbers |
| - 1 => send packets with sequence numbers |
| RECVSEQ - 0 => receive packet sequence numbers are optional |
| - 1 => drop receive packets without sequence numbers |
| LNSMODE - 0 => act as LAC. |
| - 1 => act as LNS. |
| REORDERTO reorder timeout (in millisecs). If 0, don't try to reorder. |
| ========= =========================================================== |
| |
| In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided |
| to retrieve tunnel and session statistics from the kernel using the |
| PPPoX socket of the appropriate tunnel or session. |
| |
| Sample userspace code: |
| |
| - Create session PPPoX data socket:: |
| |
| struct sockaddr_pppol2tp sax; |
| int fd; |
| |
| /* Note, the tunnel socket must be bound already, else it |
| * will not be ready |
| */ |
| sax.sa_family = AF_PPPOX; |
| sax.sa_protocol = PX_PROTO_OL2TP; |
| sax.pppol2tp.fd = tunnel_fd; |
| sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr; |
| sax.pppol2tp.addr.sin_port = addr->sin_port; |
| sax.pppol2tp.addr.sin_family = AF_INET; |
| sax.pppol2tp.s_tunnel = tunnel_id; |
| sax.pppol2tp.s_session = session_id; |
| sax.pppol2tp.d_tunnel = peer_tunnel_id; |
| sax.pppol2tp.d_session = peer_session_id; |
| |
| /* session_fd is the fd of the session's PPPoL2TP socket. |
| * tunnel_fd is the fd of the tunnel UDP / L2TPIP socket. |
| */ |
| fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax)); |
| if (fd < 0 ) { |
| return -errno; |
| } |
| return 0; |
| |
| Old L2TPv2-only API |
| ------------------- |
| |
| When L2TP was first added to the Linux kernel in 2.6.23, it |
| implemented only L2TPv2 and did not include a netlink API. Instead, |
| tunnel and session instances in the kernel were managed directly using |
| only PPPoL2TP sockets. The PPPoL2TP socket is used as described in |
| section "PPPoL2TP Session Socket API" but tunnel and session instances |
| are automatically created on a connect() of the socket instead of |
| being created by a separate netlink request: |
| |
| - Tunnels are managed using a tunnel management socket which is a |
| dedicated PPPoL2TP socket, connected to (invalid) session |
| id 0. The L2TP tunnel instance is created when the PPPoL2TP |
| tunnel management socket is connected and is destroyed when the |
| socket is closed. |
| |
| - Session instances are created in the kernel when a PPPoL2TP |
| socket is connected to a non-zero session id. Session parameters |
| are set using setsockopt. The L2TP session instance is destroyed |
| when the socket is closed. |
| |
| This API is still supported but its use is discouraged. Instead, new |
| L2TPv2 applications should use netlink to first create the tunnel and |
| session, then create a PPPoL2TP socket for the session. |
| |
| Unmanaged L2TPv3 tunnels |
| ------------------------ |
| |
| The kernel L2TP subsystem also supports static (unmanaged) L2TPv3 |
| tunnels. Unmanaged tunnels have no userspace tunnel socket, and |
| exchange no control messages with the peer to set up the tunnel; the |
| tunnel is configured manually at each end of the tunnel. All |
| configuration is done using netlink. There is no need for an L2TP |
| userspace application in this case -- the tunnel socket is created by |
| the kernel and configured using parameters sent in the |
| ``L2TP_CMD_TUNNEL_CREATE`` netlink request. The ``ip`` utility of |
| ``iproute2`` has commands for managing static L2TPv3 tunnels; do ``ip |
| l2tp help`` for more information. |
| |
| Debugging |
| --------- |
| |
| The L2TP subsystem offers a range of debugging interfaces through the |
| debugfs filesystem. |
| |
| To access these interfaces, the debugfs filesystem must first be mounted:: |
| |
| # mount -t debugfs debugfs /debug |
| |
| Files under the l2tp directory can then be accessed, providing a summary |
| of the current population of tunnel and session contexts existing in the |
| kernel:: |
| |
| # cat /debug/l2tp/tunnels |
| |
| The debugfs files should not be used by applications to obtain L2TP |
| state information because the file format is subject to change. It is |
| implemented to provide extra debug information to help diagnose |
| problems. Applications should instead use the netlink API. |
| |
| In addition the L2TP subsystem implements tracepoints using the standard |
| kernel event tracing API. The available L2TP events can be reviewed as |
| follows:: |
| |
| # find /debug/tracing/events/l2tp |
| |
| Finally, /proc/net/pppol2tp is also provided for backwards compatibility |
| with the original pppol2tp code. It lists information about L2TPv2 |
| tunnels and sessions only. Its use is discouraged. |
| |
| Internal Implementation |
| ======================= |
| |
| This section is for kernel developers and maintainers. |
| |
| Sockets |
| ------- |
| |
| UDP sockets are implemented by the networking core. When an L2TP |
| tunnel is created using a UDP socket, the socket is set up as an |
| encapsulated UDP socket by setting encap_rcv and encap_destroy |
| callbacks on the UDP socket. l2tp_udp_encap_recv is called when |
| packets are received on the socket. l2tp_udp_encap_destroy is called |
| when userspace closes the socket. |
| |
| L2TPIP sockets are implemented in `net/l2tp/l2tp_ip.c`_ and |
| `net/l2tp/l2tp_ip6.c`_. |
| |
| Tunnels |
| ------- |
| |
| The kernel keeps a struct l2tp_tunnel context per L2TP tunnel. The |
| l2tp_tunnel is always associated with a UDP or L2TP/IP socket and |
| keeps a list of sessions in the tunnel. When a tunnel is first |
| registered with L2TP core, the reference count on the socket is |
| increased. This ensures that the socket cannot be removed while L2TP's |
| data structures reference it. |
| |
| Tunnels are identified by a unique tunnel id. The id is 16-bit for |
| L2TPv2 and 32-bit for L2TPv3. Internally, the id is stored as a 32-bit |
| value. |
| |
| Tunnels are kept in a per-net list, indexed by tunnel id. The tunnel |
| id namespace is shared by L2TPv2 and L2TPv3. The tunnel context can be |
| derived from the socket's sk_user_data. |
| |
| Handling tunnel socket close is perhaps the most tricky part of the |
| L2TP implementation. If userspace closes a tunnel socket, the L2TP |
| tunnel and all of its sessions must be closed and destroyed. Since the |
| tunnel context holds a ref on the tunnel socket, the socket's |
| sk_destruct won't be called until the tunnel sock_put's its |
| socket. For UDP sockets, when userspace closes the tunnel socket, the |
| socket's encap_destroy handler is invoked, which L2TP uses to initiate |
| its tunnel close actions. For L2TPIP sockets, the socket's close |
| handler initiates the same tunnel close actions. All sessions are |
| first closed. Each session drops its tunnel ref. When the tunnel ref |
| reaches zero, the tunnel puts its socket ref. When the socket is |
| eventually destroyed, it's sk_destruct finally frees the L2TP tunnel |
| context. |
| |
| Sessions |
| -------- |
| |
| The kernel keeps a struct l2tp_session context for each session. Each |
| session has private data which is used for data specific to the |
| session type. With L2TPv2, the session always carries PPP |
| traffic. With L2TPv3, the session can carry Ethernet frames (Ethernet |
| pseudowire) or other data types such as PPP, ATM, HDLC or Frame |
| Relay. Linux currently implements only Ethernet and PPP session types. |
| |
| Some L2TP session types also have a socket (PPP pseudowires) while |
| others do not (Ethernet pseudowires). We can't therefore use the |
| socket reference count as the reference count for session |
| contexts. The L2TP implementation therefore has its own internal |
| reference counts on the session contexts. |
| |
| Like tunnels, L2TP sessions are identified by a unique |
| session id. Just as with tunnel ids, the session id is 16-bit for |
| L2TPv2 and 32-bit for L2TPv3. Internally, the id is stored as a 32-bit |
| value. |
| |
| Sessions hold a ref on their parent tunnel to ensure that the tunnel |
| stays extant while one or more sessions references it. |
| |
| Sessions are kept in a per-tunnel list, indexed by session id. L2TPv3 |
| sessions are also kept in a per-net list indexed by session id, |
| because L2TPv3 session ids are unique across all tunnels and L2TPv3 |
| data packets do not contain a tunnel id in the header. This list is |
| therefore needed to find the session context associated with a |
| received data packet when the tunnel context cannot be derived from |
| the tunnel socket. |
| |
| Although the L2TPv3 RFC specifies that L2TPv3 session ids are not |
| scoped by the tunnel, the kernel does not police this for L2TPv3 UDP |
| tunnels and does not add sessions of L2TPv3 UDP tunnels into the |
| per-net session list. In the UDP receive code, we must trust that the |
| tunnel can be identified using the tunnel socket's sk_user_data and |
| lookup the session in the tunnel's session list instead of the per-net |
| session list. |
| |
| PPP |
| --- |
| |
| `net/l2tp/l2tp_ppp.c`_ implements the PPPoL2TP socket family. Each PPP |
| session has a PPPoL2TP socket. |
| |
| The PPPoL2TP socket's sk_user_data references the l2tp_session. |
| |
| Userspace sends and receives PPP packets over L2TP using a PPPoL2TP |
| socket. Only PPP control frames pass over this socket: PPP data |
| packets are handled entirely by the kernel, passing between the L2TP |
| session and its associated ``pppN`` netdev through the PPP channel |
| interface of the kernel PPP subsystem. |
| |
| The L2TP PPP implementation handles the closing of a PPPoL2TP socket |
| by closing its corresponding L2TP session. This is complicated because |
| it must consider racing with netlink session create/destroy requests |
| and pppol2tp_connect trying to reconnect with a session that is in the |
| process of being closed. Unlike tunnels, PPP sessions do not hold a |
| ref on their associated socket, so code must be careful to sock_hold |
| the socket where necessary. For all the details, see commit |
| 3d609342cc04129ff7568e19316ce3d7451a27e8. |
| |
| Ethernet |
| -------- |
| |
| `net/l2tp/l2tp_eth.c`_ implements L2TPv3 Ethernet pseudowires. It |
| manages a netdev for each session. |
| |
| L2TP Ethernet sessions are created and destroyed by netlink request, |
| or are destroyed when the tunnel is destroyed. Unlike PPP sessions, |
| Ethernet sessions do not have an associated socket. |
| |
| Miscellaneous |
| ============= |
| |
| RFCs |
| ---- |
| |
| The kernel code implements the datapath features specified in the |
| following RFCs: |
| |
| ======= =============== =================================== |
| RFC2661 L2TPv2 https://tools.ietf.org/html/rfc2661 |
| RFC3931 L2TPv3 https://tools.ietf.org/html/rfc3931 |
| RFC4719 L2TPv3 Ethernet https://tools.ietf.org/html/rfc4719 |
| ======= =============== =================================== |
| |
| Implementations |
| --------------- |
| |
| A number of open source applications use the L2TP kernel subsystem: |
| |
| ============ ============================================== |
| iproute2 https://github.com/shemminger/iproute2 |
| go-l2tp https://github.com/katalix/go-l2tp |
| tunneldigger https://github.com/wlanslovenija/tunneldigger |
| xl2tpd https://github.com/xelerance/xl2tpd |
| ============ ============================================== |
| |
| Limitations |
| ----------- |
| |
| The current implementation has a number of limitations: |
| |
| 1) Multiple UDP sockets with the same 5-tuple address cannot be |
| used. The kernel's tunnel context is identified using private |
| data associated with the socket so it is important that each |
| socket is uniquely identified by its address. |
| |
| 2) Interfacing with openvswitch is not yet implemented. It may be |
| useful to map OVS Ethernet and VLAN ports into L2TPv3 tunnels. |
| |
| 3) VLAN pseudowires are implemented using an ``l2tpethN`` interface |
| configured with a VLAN sub-interface. Since L2TPv3 VLAN |
| pseudowires carry one and only one VLAN, it may be better to use |
| a single netdevice rather than an ``l2tpethN`` and ``l2tpethN``:M |
| pair per VLAN session. The netlink attribute |
| ``L2TP_ATTR_VLAN_ID`` was added for this, but it was never |
| implemented. |
| |
| Testing |
| ------- |
| |
| Unmanaged L2TPv3 Ethernet features are tested by the kernel's built-in |
| selftests. See `tools/testing/selftests/net/l2tp.sh`_. |
| |
| Another test suite, l2tp-ktest_, covers all |
| of the L2TP APIs and tunnel/session types. This may be integrated into |
| the kernel's built-in L2TP selftests in the future. |
| |
| .. Links |
| .. _Generic Netlink: generic_netlink.html |
| .. _libmnl: https://www.netfilter.org/projects/libmnl |
| .. _include/uapi/linux/l2tp.h: ../../../include/uapi/linux/l2tp.h |
| .. _include/linux/if_pppol2tp.h: ../../../include/linux/if_pppol2tp.h |
| .. _net/l2tp/l2tp_ip.c: ../../../net/l2tp/l2tp_ip.c |
| .. _net/l2tp/l2tp_ip6.c: ../../../net/l2tp/l2tp_ip6.c |
| .. _net/l2tp/l2tp_ppp.c: ../../../net/l2tp/l2tp_ppp.c |
| .. _net/l2tp/l2tp_eth.c: ../../../net/l2tp/l2tp_eth.c |
| .. _tools/testing/selftests/net/l2tp.sh: ../../../tools/testing/selftests/net/l2tp.sh |
| .. _l2tp-ktest: https://github.com/katalix/l2tp-ktest |
