blob: 63bc691cff91b275100a8339f1cc387555e79ae0 [file] [log] [blame]
#include <linux/linkage.h>
#include <asm-generic/export.h>
#include <asm/asm.h>
#include <asm/csr.h>
.macro fixup op reg addr lbl
100:
\op \reg, \addr
.section __ex_table,"a"
.balign RISCV_SZPTR
RISCV_PTR 100b, \lbl
.previous
.endm
ENTRY(__asm_copy_to_user)
ENTRY(__asm_copy_from_user)
/* Enable access to user memory */
li t6, SR_SUM
csrs CSR_STATUS, t6
/* Save for return value */
mv t5, a2
/*
* Register allocation for code below:
* a0 - start of uncopied dst
* a1 - start of uncopied src
* a2 - size
* t0 - end of uncopied dst
*/
add t0, a0, a2
/*
* Use byte copy only if too small.
* SZREG holds 4 for RV32 and 8 for RV64
*/
li a3, 9*SZREG /* size must be larger than size in word_copy */
bltu a2, a3, .Lbyte_copy_tail
/*
* Copy first bytes until dst is aligned to word boundary.
* a0 - start of dst
* t1 - start of aligned dst
*/
addi t1, a0, SZREG-1
andi t1, t1, ~(SZREG-1)
/* dst is already aligned, skip */
beq a0, t1, .Lskip_align_dst
1:
/* a5 - one byte for copying data */
fixup lb a5, 0(a1), 10f
addi a1, a1, 1 /* src */
fixup sb a5, 0(a0), 10f
addi a0, a0, 1 /* dst */
bltu a0, t1, 1b /* t1 - start of aligned dst */
.Lskip_align_dst:
/*
* Now dst is aligned.
* Use shift-copy if src is misaligned.
* Use word-copy if both src and dst are aligned because
* can not use shift-copy which do not require shifting
*/
/* a1 - start of src */
andi a3, a1, SZREG-1
bnez a3, .Lshift_copy
.Lword_copy:
/*
* Both src and dst are aligned, unrolled word copy
*
* a0 - start of aligned dst
* a1 - start of aligned src
* t0 - end of aligned dst
*/
addi t0, t0, -(8*SZREG) /* not to over run */
2:
fixup REG_L a4, 0(a1), 10f
fixup REG_L a5, SZREG(a1), 10f
fixup REG_L a6, 2*SZREG(a1), 10f
fixup REG_L a7, 3*SZREG(a1), 10f
fixup REG_L t1, 4*SZREG(a1), 10f
fixup REG_L t2, 5*SZREG(a1), 10f
fixup REG_L t3, 6*SZREG(a1), 10f
fixup REG_L t4, 7*SZREG(a1), 10f
fixup REG_S a4, 0(a0), 10f
fixup REG_S a5, SZREG(a0), 10f
fixup REG_S a6, 2*SZREG(a0), 10f
fixup REG_S a7, 3*SZREG(a0), 10f
fixup REG_S t1, 4*SZREG(a0), 10f
fixup REG_S t2, 5*SZREG(a0), 10f
fixup REG_S t3, 6*SZREG(a0), 10f
fixup REG_S t4, 7*SZREG(a0), 10f
addi a0, a0, 8*SZREG
addi a1, a1, 8*SZREG
bltu a0, t0, 2b
addi t0, t0, 8*SZREG /* revert to original value */
j .Lbyte_copy_tail
.Lshift_copy:
/*
* Word copy with shifting.
* For misaligned copy we still perform aligned word copy, but
* we need to use the value fetched from the previous iteration and
* do some shifts.
* This is safe because reading is less than a word size.
*
* a0 - start of aligned dst
* a1 - start of src
* a3 - a1 & mask:(SZREG-1)
* t0 - end of uncopied dst
* t1 - end of aligned dst
*/
/* calculating aligned word boundary for dst */
andi t1, t0, ~(SZREG-1)
/* Converting unaligned src to aligned src */
andi a1, a1, ~(SZREG-1)
/*
* Calculate shifts
* t3 - prev shift
* t4 - current shift
*/
slli t3, a3, 3 /* converting bytes in a3 to bits */
li a5, SZREG*8
sub t4, a5, t3
/* Load the first word to combine with second word */
fixup REG_L a5, 0(a1), 10f
3:
/* Main shifting copy
*
* a0 - start of aligned dst
* a1 - start of aligned src
* t1 - end of aligned dst
*/
/* At least one iteration will be executed */
srl a4, a5, t3
fixup REG_L a5, SZREG(a1), 10f
addi a1, a1, SZREG
sll a2, a5, t4
or a2, a2, a4
fixup REG_S a2, 0(a0), 10f
addi a0, a0, SZREG
bltu a0, t1, 3b
/* Revert src to original unaligned value */
add a1, a1, a3
.Lbyte_copy_tail:
/*
* Byte copy anything left.
*
* a0 - start of remaining dst
* a1 - start of remaining src
* t0 - end of remaining dst
*/
bgeu a0, t0, .Lout_copy_user /* check if end of copy */
4:
fixup lb a5, 0(a1), 10f
addi a1, a1, 1 /* src */
fixup sb a5, 0(a0), 10f
addi a0, a0, 1 /* dst */
bltu a0, t0, 4b /* t0 - end of dst */
.Lout_copy_user:
/* Disable access to user memory */
csrc CSR_STATUS, t6
li a0, 0
ret
ENDPROC(__asm_copy_to_user)
ENDPROC(__asm_copy_from_user)
EXPORT_SYMBOL(__asm_copy_to_user)
EXPORT_SYMBOL(__asm_copy_from_user)
ENTRY(__clear_user)
/* Enable access to user memory */
li t6, SR_SUM
csrs CSR_STATUS, t6
add a3, a0, a1
addi t0, a0, SZREG-1
andi t1, a3, ~(SZREG-1)
andi t0, t0, ~(SZREG-1)
/*
* a3: terminal address of target region
* t0: lowest doubleword-aligned address in target region
* t1: highest doubleword-aligned address in target region
*/
bgeu t0, t1, 2f
bltu a0, t0, 4f
1:
fixup REG_S, zero, (a0), 11f
addi a0, a0, SZREG
bltu a0, t1, 1b
2:
bltu a0, a3, 5f
3:
/* Disable access to user memory */
csrc CSR_STATUS, t6
li a0, 0
ret
4: /* Edge case: unalignment */
fixup sb, zero, (a0), 11f
addi a0, a0, 1
bltu a0, t0, 4b
j 1b
5: /* Edge case: remainder */
fixup sb, zero, (a0), 11f
addi a0, a0, 1
bltu a0, a3, 5b
j 3b
ENDPROC(__clear_user)
EXPORT_SYMBOL(__clear_user)
.section .fixup,"ax"
.balign 4
/* Fixup code for __copy_user(10) and __clear_user(11) */
10:
/* Disable access to user memory */
csrs CSR_STATUS, t6
mv a0, t5
ret
11:
csrs CSR_STATUS, t6
mv a0, a1
ret
.previous