| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #define SWSMU_CODE_LAYER_L1 |
| |
| #include <linux/firmware.h> |
| #include <linux/pci.h> |
| #include <linux/power_supply.h> |
| #include <linux/reboot.h> |
| |
| #include "amdgpu.h" |
| #include "amdgpu_smu.h" |
| #include "smu_internal.h" |
| #include "atom.h" |
| #include "arcturus_ppt.h" |
| #include "navi10_ppt.h" |
| #include "sienna_cichlid_ppt.h" |
| #include "renoir_ppt.h" |
| #include "vangogh_ppt.h" |
| #include "aldebaran_ppt.h" |
| #include "yellow_carp_ppt.h" |
| #include "cyan_skillfish_ppt.h" |
| #include "smu_v13_0_0_ppt.h" |
| #include "smu_v13_0_4_ppt.h" |
| #include "smu_v13_0_5_ppt.h" |
| #include "smu_v13_0_6_ppt.h" |
| #include "smu_v13_0_7_ppt.h" |
| #include "smu_v14_0_0_ppt.h" |
| #include "smu_v14_0_2_ppt.h" |
| #include "amd_pcie.h" |
| |
| /* |
| * DO NOT use these for err/warn/info/debug messages. |
| * Use dev_err, dev_warn, dev_info and dev_dbg instead. |
| * They are more MGPU friendly. |
| */ |
| #undef pr_err |
| #undef pr_warn |
| #undef pr_info |
| #undef pr_debug |
| |
| static const struct amd_pm_funcs swsmu_pm_funcs; |
| static int smu_force_smuclk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t mask); |
| static int smu_handle_task(struct smu_context *smu, |
| enum amd_dpm_forced_level level, |
| enum amd_pp_task task_id); |
| static int smu_reset(struct smu_context *smu); |
| static int smu_set_fan_speed_pwm(void *handle, u32 speed); |
| static int smu_set_fan_control_mode(void *handle, u32 value); |
| static int smu_set_power_limit(void *handle, uint32_t limit); |
| static int smu_set_fan_speed_rpm(void *handle, uint32_t speed); |
| static int smu_set_gfx_cgpg(struct smu_context *smu, bool enabled); |
| static int smu_set_mp1_state(void *handle, enum pp_mp1_state mp1_state); |
| |
| static int smu_sys_get_pp_feature_mask(void *handle, |
| char *buf) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| return smu_get_pp_feature_mask(smu, buf); |
| } |
| |
| static int smu_sys_set_pp_feature_mask(void *handle, |
| uint64_t new_mask) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| return smu_set_pp_feature_mask(smu, new_mask); |
| } |
| |
| int smu_set_residency_gfxoff(struct smu_context *smu, bool value) |
| { |
| if (!smu->ppt_funcs->set_gfx_off_residency) |
| return -EINVAL; |
| |
| return smu_set_gfx_off_residency(smu, value); |
| } |
| |
| int smu_get_residency_gfxoff(struct smu_context *smu, u32 *value) |
| { |
| if (!smu->ppt_funcs->get_gfx_off_residency) |
| return -EINVAL; |
| |
| return smu_get_gfx_off_residency(smu, value); |
| } |
| |
| int smu_get_entrycount_gfxoff(struct smu_context *smu, u64 *value) |
| { |
| if (!smu->ppt_funcs->get_gfx_off_entrycount) |
| return -EINVAL; |
| |
| return smu_get_gfx_off_entrycount(smu, value); |
| } |
| |
| int smu_get_status_gfxoff(struct smu_context *smu, uint32_t *value) |
| { |
| if (!smu->ppt_funcs->get_gfx_off_status) |
| return -EINVAL; |
| |
| *value = smu_get_gfx_off_status(smu); |
| |
| return 0; |
| } |
| |
| int smu_set_soft_freq_range(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t min, |
| uint32_t max) |
| { |
| int ret = 0; |
| |
| if (smu->ppt_funcs->set_soft_freq_limited_range) |
| ret = smu->ppt_funcs->set_soft_freq_limited_range(smu, |
| clk_type, |
| min, |
| max); |
| |
| return ret; |
| } |
| |
| int smu_get_dpm_freq_range(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t *min, |
| uint32_t *max) |
| { |
| int ret = -ENOTSUPP; |
| |
| if (!min && !max) |
| return -EINVAL; |
| |
| if (smu->ppt_funcs->get_dpm_ultimate_freq) |
| ret = smu->ppt_funcs->get_dpm_ultimate_freq(smu, |
| clk_type, |
| min, |
| max); |
| |
| return ret; |
| } |
| |
| int smu_set_gfx_power_up_by_imu(struct smu_context *smu) |
| { |
| int ret = 0; |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (smu->ppt_funcs->set_gfx_power_up_by_imu) { |
| ret = smu->ppt_funcs->set_gfx_power_up_by_imu(smu); |
| if (ret) |
| dev_err(adev->dev, "Failed to enable gfx imu!\n"); |
| } |
| return ret; |
| } |
| |
| static u32 smu_get_mclk(void *handle, bool low) |
| { |
| struct smu_context *smu = handle; |
| uint32_t clk_freq; |
| int ret = 0; |
| |
| ret = smu_get_dpm_freq_range(smu, SMU_UCLK, |
| low ? &clk_freq : NULL, |
| !low ? &clk_freq : NULL); |
| if (ret) |
| return 0; |
| return clk_freq * 100; |
| } |
| |
| static u32 smu_get_sclk(void *handle, bool low) |
| { |
| struct smu_context *smu = handle; |
| uint32_t clk_freq; |
| int ret = 0; |
| |
| ret = smu_get_dpm_freq_range(smu, SMU_GFXCLK, |
| low ? &clk_freq : NULL, |
| !low ? &clk_freq : NULL); |
| if (ret) |
| return 0; |
| return clk_freq * 100; |
| } |
| |
| static int smu_set_gfx_imu_enable(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) |
| return 0; |
| |
| if (amdgpu_in_reset(smu->adev) || adev->in_s0ix) |
| return 0; |
| |
| return smu_set_gfx_power_up_by_imu(smu); |
| } |
| |
| static bool is_vcn_enabled(struct amdgpu_device *adev) |
| { |
| int i; |
| |
| for (i = 0; i < adev->num_ip_blocks; i++) { |
| if ((adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_VCN || |
| adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_JPEG) && |
| !adev->ip_blocks[i].status.valid) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int smu_dpm_set_vcn_enable(struct smu_context *smu, |
| bool enable) |
| { |
| struct smu_power_context *smu_power = &smu->smu_power; |
| struct smu_power_gate *power_gate = &smu_power->power_gate; |
| int ret = 0; |
| |
| /* |
| * don't poweron vcn/jpeg when they are skipped. |
| */ |
| if (!is_vcn_enabled(smu->adev)) |
| return 0; |
| |
| if (!smu->ppt_funcs->dpm_set_vcn_enable) |
| return 0; |
| |
| if (atomic_read(&power_gate->vcn_gated) ^ enable) |
| return 0; |
| |
| ret = smu->ppt_funcs->dpm_set_vcn_enable(smu, enable); |
| if (!ret) |
| atomic_set(&power_gate->vcn_gated, !enable); |
| |
| return ret; |
| } |
| |
| static int smu_dpm_set_jpeg_enable(struct smu_context *smu, |
| bool enable) |
| { |
| struct smu_power_context *smu_power = &smu->smu_power; |
| struct smu_power_gate *power_gate = &smu_power->power_gate; |
| int ret = 0; |
| |
| if (!is_vcn_enabled(smu->adev)) |
| return 0; |
| |
| if (!smu->ppt_funcs->dpm_set_jpeg_enable) |
| return 0; |
| |
| if (atomic_read(&power_gate->jpeg_gated) ^ enable) |
| return 0; |
| |
| ret = smu->ppt_funcs->dpm_set_jpeg_enable(smu, enable); |
| if (!ret) |
| atomic_set(&power_gate->jpeg_gated, !enable); |
| |
| return ret; |
| } |
| |
| static int smu_dpm_set_vpe_enable(struct smu_context *smu, |
| bool enable) |
| { |
| struct smu_power_context *smu_power = &smu->smu_power; |
| struct smu_power_gate *power_gate = &smu_power->power_gate; |
| int ret = 0; |
| |
| if (!smu->ppt_funcs->dpm_set_vpe_enable) |
| return 0; |
| |
| if (atomic_read(&power_gate->vpe_gated) ^ enable) |
| return 0; |
| |
| ret = smu->ppt_funcs->dpm_set_vpe_enable(smu, enable); |
| if (!ret) |
| atomic_set(&power_gate->vpe_gated, !enable); |
| |
| return ret; |
| } |
| |
| static int smu_dpm_set_umsch_mm_enable(struct smu_context *smu, |
| bool enable) |
| { |
| struct smu_power_context *smu_power = &smu->smu_power; |
| struct smu_power_gate *power_gate = &smu_power->power_gate; |
| int ret = 0; |
| |
| if (!smu->adev->enable_umsch_mm) |
| return 0; |
| |
| if (!smu->ppt_funcs->dpm_set_umsch_mm_enable) |
| return 0; |
| |
| if (atomic_read(&power_gate->umsch_mm_gated) ^ enable) |
| return 0; |
| |
| ret = smu->ppt_funcs->dpm_set_umsch_mm_enable(smu, enable); |
| if (!ret) |
| atomic_set(&power_gate->umsch_mm_gated, !enable); |
| |
| return ret; |
| } |
| |
| static int smu_set_mall_enable(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| if (!smu->ppt_funcs->set_mall_enable) |
| return 0; |
| |
| ret = smu->ppt_funcs->set_mall_enable(smu); |
| |
| return ret; |
| } |
| |
| /** |
| * smu_dpm_set_power_gate - power gate/ungate the specific IP block |
| * |
| * @handle: smu_context pointer |
| * @block_type: the IP block to power gate/ungate |
| * @gate: to power gate if true, ungate otherwise |
| * |
| * This API uses no smu->mutex lock protection due to: |
| * 1. It is either called by other IP block(gfx/sdma/vcn/uvd/vce). |
| * This is guarded to be race condition free by the caller. |
| * 2. Or get called on user setting request of power_dpm_force_performance_level. |
| * Under this case, the smu->mutex lock protection is already enforced on |
| * the parent API smu_force_performance_level of the call path. |
| */ |
| static int smu_dpm_set_power_gate(void *handle, |
| uint32_t block_type, |
| bool gate) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) { |
| dev_WARN(smu->adev->dev, |
| "SMU uninitialized but power %s requested for %u!\n", |
| gate ? "gate" : "ungate", block_type); |
| return -EOPNOTSUPP; |
| } |
| |
| switch (block_type) { |
| /* |
| * Some legacy code of amdgpu_vcn.c and vcn_v2*.c still uses |
| * AMD_IP_BLOCK_TYPE_UVD for VCN. So, here both of them are kept. |
| */ |
| case AMD_IP_BLOCK_TYPE_UVD: |
| case AMD_IP_BLOCK_TYPE_VCN: |
| ret = smu_dpm_set_vcn_enable(smu, !gate); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to power %s VCN!\n", |
| gate ? "gate" : "ungate"); |
| break; |
| case AMD_IP_BLOCK_TYPE_GFX: |
| ret = smu_gfx_off_control(smu, gate); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to %s gfxoff!\n", |
| gate ? "enable" : "disable"); |
| break; |
| case AMD_IP_BLOCK_TYPE_SDMA: |
| ret = smu_powergate_sdma(smu, gate); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to power %s SDMA!\n", |
| gate ? "gate" : "ungate"); |
| break; |
| case AMD_IP_BLOCK_TYPE_JPEG: |
| ret = smu_dpm_set_jpeg_enable(smu, !gate); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to power %s JPEG!\n", |
| gate ? "gate" : "ungate"); |
| break; |
| case AMD_IP_BLOCK_TYPE_VPE: |
| ret = smu_dpm_set_vpe_enable(smu, !gate); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to power %s VPE!\n", |
| gate ? "gate" : "ungate"); |
| break; |
| default: |
| dev_err(smu->adev->dev, "Unsupported block type!\n"); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * smu_set_user_clk_dependencies - set user profile clock dependencies |
| * |
| * @smu: smu_context pointer |
| * @clk: enum smu_clk_type type |
| * |
| * Enable/Disable the clock dependency for the @clk type. |
| */ |
| static void smu_set_user_clk_dependencies(struct smu_context *smu, enum smu_clk_type clk) |
| { |
| if (smu->adev->in_suspend) |
| return; |
| |
| if (clk == SMU_MCLK) { |
| smu->user_dpm_profile.clk_dependency = 0; |
| smu->user_dpm_profile.clk_dependency = BIT(SMU_FCLK) | BIT(SMU_SOCCLK); |
| } else if (clk == SMU_FCLK) { |
| /* MCLK takes precedence over FCLK */ |
| if (smu->user_dpm_profile.clk_dependency == (BIT(SMU_FCLK) | BIT(SMU_SOCCLK))) |
| return; |
| |
| smu->user_dpm_profile.clk_dependency = 0; |
| smu->user_dpm_profile.clk_dependency = BIT(SMU_MCLK) | BIT(SMU_SOCCLK); |
| } else if (clk == SMU_SOCCLK) { |
| /* MCLK takes precedence over SOCCLK */ |
| if (smu->user_dpm_profile.clk_dependency == (BIT(SMU_FCLK) | BIT(SMU_SOCCLK))) |
| return; |
| |
| smu->user_dpm_profile.clk_dependency = 0; |
| smu->user_dpm_profile.clk_dependency = BIT(SMU_MCLK) | BIT(SMU_FCLK); |
| } else |
| /* Add clk dependencies here, if any */ |
| return; |
| } |
| |
| /** |
| * smu_restore_dpm_user_profile - reinstate user dpm profile |
| * |
| * @smu: smu_context pointer |
| * |
| * Restore the saved user power configurations include power limit, |
| * clock frequencies, fan control mode and fan speed. |
| */ |
| static void smu_restore_dpm_user_profile(struct smu_context *smu) |
| { |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); |
| int ret = 0; |
| |
| if (!smu->adev->in_suspend) |
| return; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return; |
| |
| /* Enable restore flag */ |
| smu->user_dpm_profile.flags |= SMU_DPM_USER_PROFILE_RESTORE; |
| |
| /* set the user dpm power limit */ |
| if (smu->user_dpm_profile.power_limit) { |
| ret = smu_set_power_limit(smu, smu->user_dpm_profile.power_limit); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to set power limit value\n"); |
| } |
| |
| /* set the user dpm clock configurations */ |
| if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) { |
| enum smu_clk_type clk_type; |
| |
| for (clk_type = 0; clk_type < SMU_CLK_COUNT; clk_type++) { |
| /* |
| * Iterate over smu clk type and force the saved user clk |
| * configs, skip if clock dependency is enabled |
| */ |
| if (!(smu->user_dpm_profile.clk_dependency & BIT(clk_type)) && |
| smu->user_dpm_profile.clk_mask[clk_type]) { |
| ret = smu_force_smuclk_levels(smu, clk_type, |
| smu->user_dpm_profile.clk_mask[clk_type]); |
| if (ret) |
| dev_err(smu->adev->dev, |
| "Failed to set clock type = %d\n", clk_type); |
| } |
| } |
| } |
| |
| /* set the user dpm fan configurations */ |
| if (smu->user_dpm_profile.fan_mode == AMD_FAN_CTRL_MANUAL || |
| smu->user_dpm_profile.fan_mode == AMD_FAN_CTRL_NONE) { |
| ret = smu_set_fan_control_mode(smu, smu->user_dpm_profile.fan_mode); |
| if (ret != -EOPNOTSUPP) { |
| smu->user_dpm_profile.fan_speed_pwm = 0; |
| smu->user_dpm_profile.fan_speed_rpm = 0; |
| smu->user_dpm_profile.fan_mode = AMD_FAN_CTRL_AUTO; |
| dev_err(smu->adev->dev, "Failed to set manual fan control mode\n"); |
| } |
| |
| if (smu->user_dpm_profile.fan_speed_pwm) { |
| ret = smu_set_fan_speed_pwm(smu, smu->user_dpm_profile.fan_speed_pwm); |
| if (ret != -EOPNOTSUPP) |
| dev_err(smu->adev->dev, "Failed to set manual fan speed in pwm\n"); |
| } |
| |
| if (smu->user_dpm_profile.fan_speed_rpm) { |
| ret = smu_set_fan_speed_rpm(smu, smu->user_dpm_profile.fan_speed_rpm); |
| if (ret != -EOPNOTSUPP) |
| dev_err(smu->adev->dev, "Failed to set manual fan speed in rpm\n"); |
| } |
| } |
| |
| /* Restore user customized OD settings */ |
| if (smu->user_dpm_profile.user_od) { |
| if (smu->ppt_funcs->restore_user_od_settings) { |
| ret = smu->ppt_funcs->restore_user_od_settings(smu); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to upload customized OD settings\n"); |
| } |
| } |
| |
| /* Disable restore flag */ |
| smu->user_dpm_profile.flags &= ~SMU_DPM_USER_PROFILE_RESTORE; |
| } |
| |
| static int smu_get_power_num_states(void *handle, |
| struct pp_states_info *state_info) |
| { |
| if (!state_info) |
| return -EINVAL; |
| |
| /* not support power state */ |
| memset(state_info, 0, sizeof(struct pp_states_info)); |
| state_info->nums = 1; |
| state_info->states[0] = POWER_STATE_TYPE_DEFAULT; |
| |
| return 0; |
| } |
| |
| bool is_support_sw_smu(struct amdgpu_device *adev) |
| { |
| /* vega20 is 11.0.2, but it's supported via the powerplay code */ |
| if (adev->asic_type == CHIP_VEGA20) |
| return false; |
| |
| if (amdgpu_ip_version(adev, MP1_HWIP, 0) >= IP_VERSION(11, 0, 0)) |
| return true; |
| |
| return false; |
| } |
| |
| bool is_support_cclk_dpm(struct amdgpu_device *adev) |
| { |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| |
| if (!smu_feature_is_enabled(smu, SMU_FEATURE_CCLK_DPM_BIT)) |
| return false; |
| |
| return true; |
| } |
| |
| |
| static int smu_sys_get_pp_table(void *handle, |
| char **table) |
| { |
| struct smu_context *smu = handle; |
| struct smu_table_context *smu_table = &smu->smu_table; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu_table->power_play_table && !smu_table->hardcode_pptable) |
| return -EINVAL; |
| |
| if (smu_table->hardcode_pptable) |
| *table = smu_table->hardcode_pptable; |
| else |
| *table = smu_table->power_play_table; |
| |
| return smu_table->power_play_table_size; |
| } |
| |
| static int smu_sys_set_pp_table(void *handle, |
| const char *buf, |
| size_t size) |
| { |
| struct smu_context *smu = handle; |
| struct smu_table_context *smu_table = &smu->smu_table; |
| ATOM_COMMON_TABLE_HEADER *header = (ATOM_COMMON_TABLE_HEADER *)buf; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (header->usStructureSize != size) { |
| dev_err(smu->adev->dev, "pp table size not matched !\n"); |
| return -EIO; |
| } |
| |
| if (!smu_table->hardcode_pptable) { |
| smu_table->hardcode_pptable = kzalloc(size, GFP_KERNEL); |
| if (!smu_table->hardcode_pptable) |
| return -ENOMEM; |
| } |
| |
| memcpy(smu_table->hardcode_pptable, buf, size); |
| smu_table->power_play_table = smu_table->hardcode_pptable; |
| smu_table->power_play_table_size = size; |
| |
| /* |
| * Special hw_fini action(for Navi1x, the DPMs disablement will be |
| * skipped) may be needed for custom pptable uploading. |
| */ |
| smu->uploading_custom_pp_table = true; |
| |
| ret = smu_reset(smu); |
| if (ret) |
| dev_info(smu->adev->dev, "smu reset failed, ret = %d\n", ret); |
| |
| smu->uploading_custom_pp_table = false; |
| |
| return ret; |
| } |
| |
| static int smu_get_driver_allowed_feature_mask(struct smu_context *smu) |
| { |
| struct smu_feature *feature = &smu->smu_feature; |
| uint32_t allowed_feature_mask[SMU_FEATURE_MAX/32]; |
| int ret = 0; |
| |
| /* |
| * With SCPM enabled, the allowed featuremasks setting(via |
| * PPSMC_MSG_SetAllowedFeaturesMaskLow/High) is not permitted. |
| * That means there is no way to let PMFW knows the settings below. |
| * Thus, we just assume all the features are allowed under |
| * such scenario. |
| */ |
| if (smu->adev->scpm_enabled) { |
| bitmap_fill(feature->allowed, SMU_FEATURE_MAX); |
| return 0; |
| } |
| |
| bitmap_zero(feature->allowed, SMU_FEATURE_MAX); |
| |
| ret = smu_get_allowed_feature_mask(smu, allowed_feature_mask, |
| SMU_FEATURE_MAX/32); |
| if (ret) |
| return ret; |
| |
| bitmap_or(feature->allowed, feature->allowed, |
| (unsigned long *)allowed_feature_mask, |
| feature->feature_num); |
| |
| return ret; |
| } |
| |
| static int smu_set_funcs(struct amdgpu_device *adev) |
| { |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| |
| if (adev->pm.pp_feature & PP_OVERDRIVE_MASK) |
| smu->od_enabled = true; |
| |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(11, 0, 0): |
| case IP_VERSION(11, 0, 5): |
| case IP_VERSION(11, 0, 9): |
| navi10_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(11, 0, 7): |
| case IP_VERSION(11, 0, 11): |
| case IP_VERSION(11, 0, 12): |
| case IP_VERSION(11, 0, 13): |
| sienna_cichlid_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(12, 0, 0): |
| case IP_VERSION(12, 0, 1): |
| renoir_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(11, 5, 0): |
| vangogh_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(13, 0, 1): |
| case IP_VERSION(13, 0, 3): |
| case IP_VERSION(13, 0, 8): |
| yellow_carp_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(13, 0, 4): |
| case IP_VERSION(13, 0, 11): |
| smu_v13_0_4_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(13, 0, 5): |
| smu_v13_0_5_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(11, 0, 8): |
| cyan_skillfish_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(11, 0, 2): |
| adev->pm.pp_feature &= ~PP_GFXOFF_MASK; |
| arcturus_set_ppt_funcs(smu); |
| /* OD is not supported on Arcturus */ |
| smu->od_enabled = false; |
| break; |
| case IP_VERSION(13, 0, 2): |
| aldebaran_set_ppt_funcs(smu); |
| /* Enable pp_od_clk_voltage node */ |
| smu->od_enabled = true; |
| break; |
| case IP_VERSION(13, 0, 0): |
| case IP_VERSION(13, 0, 10): |
| smu_v13_0_0_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(13, 0, 6): |
| case IP_VERSION(13, 0, 14): |
| smu_v13_0_6_set_ppt_funcs(smu); |
| /* Enable pp_od_clk_voltage node */ |
| smu->od_enabled = true; |
| break; |
| case IP_VERSION(13, 0, 7): |
| smu_v13_0_7_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(14, 0, 0): |
| case IP_VERSION(14, 0, 1): |
| case IP_VERSION(14, 0, 4): |
| smu_v14_0_0_set_ppt_funcs(smu); |
| break; |
| case IP_VERSION(14, 0, 2): |
| case IP_VERSION(14, 0, 3): |
| smu_v14_0_2_set_ppt_funcs(smu); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int smu_early_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu; |
| int r; |
| |
| smu = kzalloc(sizeof(struct smu_context), GFP_KERNEL); |
| if (!smu) |
| return -ENOMEM; |
| |
| smu->adev = adev; |
| smu->pm_enabled = !!amdgpu_dpm; |
| smu->is_apu = false; |
| smu->smu_baco.state = SMU_BACO_STATE_NONE; |
| smu->smu_baco.platform_support = false; |
| smu->smu_baco.maco_support = false; |
| smu->user_dpm_profile.fan_mode = -1; |
| |
| mutex_init(&smu->message_lock); |
| |
| adev->powerplay.pp_handle = smu; |
| adev->powerplay.pp_funcs = &swsmu_pm_funcs; |
| |
| r = smu_set_funcs(adev); |
| if (r) |
| return r; |
| return smu_init_microcode(smu); |
| } |
| |
| static int smu_set_default_dpm_table(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| struct smu_power_context *smu_power = &smu->smu_power; |
| struct smu_power_gate *power_gate = &smu_power->power_gate; |
| int vcn_gate, jpeg_gate; |
| int ret = 0; |
| |
| if (!smu->ppt_funcs->set_default_dpm_table) |
| return 0; |
| |
| if (adev->pg_flags & AMD_PG_SUPPORT_VCN) |
| vcn_gate = atomic_read(&power_gate->vcn_gated); |
| if (adev->pg_flags & AMD_PG_SUPPORT_JPEG) |
| jpeg_gate = atomic_read(&power_gate->jpeg_gated); |
| |
| if (adev->pg_flags & AMD_PG_SUPPORT_VCN) { |
| ret = smu_dpm_set_vcn_enable(smu, true); |
| if (ret) |
| return ret; |
| } |
| |
| if (adev->pg_flags & AMD_PG_SUPPORT_JPEG) { |
| ret = smu_dpm_set_jpeg_enable(smu, true); |
| if (ret) |
| goto err_out; |
| } |
| |
| ret = smu->ppt_funcs->set_default_dpm_table(smu); |
| if (ret) |
| dev_err(smu->adev->dev, |
| "Failed to setup default dpm clock tables!\n"); |
| |
| if (adev->pg_flags & AMD_PG_SUPPORT_JPEG) |
| smu_dpm_set_jpeg_enable(smu, !jpeg_gate); |
| err_out: |
| if (adev->pg_flags & AMD_PG_SUPPORT_VCN) |
| smu_dpm_set_vcn_enable(smu, !vcn_gate); |
| |
| return ret; |
| } |
| |
| static int smu_apply_default_config_table_settings(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| ret = smu_get_default_config_table_settings(smu, |
| &adev->pm.config_table); |
| if (ret) |
| return ret; |
| |
| return smu_set_config_table(smu, &adev->pm.config_table); |
| } |
| |
| static int smu_late_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| int ret = 0; |
| |
| smu_set_fine_grain_gfx_freq_parameters(smu); |
| |
| if (!smu->pm_enabled) |
| return 0; |
| |
| ret = smu_post_init(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to post smu init!\n"); |
| return ret; |
| } |
| |
| /* |
| * Explicitly notify PMFW the power mode the system in. Since |
| * the PMFW may boot the ASIC with a different mode. |
| * For those supporting ACDC switch via gpio, PMFW will |
| * handle the switch automatically. Driver involvement |
| * is unnecessary. |
| */ |
| adev->pm.ac_power = power_supply_is_system_supplied() > 0; |
| smu_set_ac_dc(smu); |
| |
| if ((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(13, 0, 1)) || |
| (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(13, 0, 3))) |
| return 0; |
| |
| if (!amdgpu_sriov_vf(adev) || smu->od_enabled) { |
| ret = smu_set_default_od_settings(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to setup default OD settings!\n"); |
| return ret; |
| } |
| } |
| |
| ret = smu_populate_umd_state_clk(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to populate UMD state clocks!\n"); |
| return ret; |
| } |
| |
| ret = smu_get_asic_power_limits(smu, |
| &smu->current_power_limit, |
| &smu->default_power_limit, |
| &smu->max_power_limit, |
| &smu->min_power_limit); |
| if (ret) { |
| dev_err(adev->dev, "Failed to get asic power limits!\n"); |
| return ret; |
| } |
| |
| if (!amdgpu_sriov_vf(adev)) |
| smu_get_unique_id(smu); |
| |
| smu_get_fan_parameters(smu); |
| |
| smu_handle_task(smu, |
| smu->smu_dpm.dpm_level, |
| AMD_PP_TASK_COMPLETE_INIT); |
| |
| ret = smu_apply_default_config_table_settings(smu); |
| if (ret && (ret != -EOPNOTSUPP)) { |
| dev_err(adev->dev, "Failed to apply default DriverSmuConfig settings!\n"); |
| return ret; |
| } |
| |
| smu_restore_dpm_user_profile(smu); |
| |
| return 0; |
| } |
| |
| static int smu_init_fb_allocations(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *tables = smu_table->tables; |
| struct smu_table *driver_table = &(smu_table->driver_table); |
| uint32_t max_table_size = 0; |
| int ret, i; |
| |
| /* VRAM allocation for tool table */ |
| if (tables[SMU_TABLE_PMSTATUSLOG].size) { |
| ret = amdgpu_bo_create_kernel(adev, |
| tables[SMU_TABLE_PMSTATUSLOG].size, |
| tables[SMU_TABLE_PMSTATUSLOG].align, |
| tables[SMU_TABLE_PMSTATUSLOG].domain, |
| &tables[SMU_TABLE_PMSTATUSLOG].bo, |
| &tables[SMU_TABLE_PMSTATUSLOG].mc_address, |
| &tables[SMU_TABLE_PMSTATUSLOG].cpu_addr); |
| if (ret) { |
| dev_err(adev->dev, "VRAM allocation for tool table failed!\n"); |
| return ret; |
| } |
| } |
| |
| driver_table->domain = AMDGPU_GEM_DOMAIN_VRAM | AMDGPU_GEM_DOMAIN_GTT; |
| /* VRAM allocation for driver table */ |
| for (i = 0; i < SMU_TABLE_COUNT; i++) { |
| if (tables[i].size == 0) |
| continue; |
| |
| /* If one of the tables has VRAM domain restriction, keep it in |
| * VRAM |
| */ |
| if ((tables[i].domain & |
| (AMDGPU_GEM_DOMAIN_VRAM | AMDGPU_GEM_DOMAIN_GTT)) == |
| AMDGPU_GEM_DOMAIN_VRAM) |
| driver_table->domain = AMDGPU_GEM_DOMAIN_VRAM; |
| |
| if (i == SMU_TABLE_PMSTATUSLOG) |
| continue; |
| |
| if (max_table_size < tables[i].size) |
| max_table_size = tables[i].size; |
| } |
| |
| driver_table->size = max_table_size; |
| driver_table->align = PAGE_SIZE; |
| |
| ret = amdgpu_bo_create_kernel(adev, |
| driver_table->size, |
| driver_table->align, |
| driver_table->domain, |
| &driver_table->bo, |
| &driver_table->mc_address, |
| &driver_table->cpu_addr); |
| if (ret) { |
| dev_err(adev->dev, "VRAM allocation for driver table failed!\n"); |
| if (tables[SMU_TABLE_PMSTATUSLOG].mc_address) |
| amdgpu_bo_free_kernel(&tables[SMU_TABLE_PMSTATUSLOG].bo, |
| &tables[SMU_TABLE_PMSTATUSLOG].mc_address, |
| &tables[SMU_TABLE_PMSTATUSLOG].cpu_addr); |
| } |
| |
| return ret; |
| } |
| |
| static int smu_fini_fb_allocations(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *tables = smu_table->tables; |
| struct smu_table *driver_table = &(smu_table->driver_table); |
| |
| if (tables[SMU_TABLE_PMSTATUSLOG].mc_address) |
| amdgpu_bo_free_kernel(&tables[SMU_TABLE_PMSTATUSLOG].bo, |
| &tables[SMU_TABLE_PMSTATUSLOG].mc_address, |
| &tables[SMU_TABLE_PMSTATUSLOG].cpu_addr); |
| |
| amdgpu_bo_free_kernel(&driver_table->bo, |
| &driver_table->mc_address, |
| &driver_table->cpu_addr); |
| |
| return 0; |
| } |
| |
| /** |
| * smu_alloc_memory_pool - allocate memory pool in the system memory |
| * |
| * @smu: amdgpu_device pointer |
| * |
| * This memory pool will be used for SMC use and msg SetSystemVirtualDramAddr |
| * and DramLogSetDramAddr can notify it changed. |
| * |
| * Returns 0 on success, error on failure. |
| */ |
| static int smu_alloc_memory_pool(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *memory_pool = &smu_table->memory_pool; |
| uint64_t pool_size = smu->pool_size; |
| int ret = 0; |
| |
| if (pool_size == SMU_MEMORY_POOL_SIZE_ZERO) |
| return ret; |
| |
| memory_pool->size = pool_size; |
| memory_pool->align = PAGE_SIZE; |
| memory_pool->domain = AMDGPU_GEM_DOMAIN_GTT; |
| |
| switch (pool_size) { |
| case SMU_MEMORY_POOL_SIZE_256_MB: |
| case SMU_MEMORY_POOL_SIZE_512_MB: |
| case SMU_MEMORY_POOL_SIZE_1_GB: |
| case SMU_MEMORY_POOL_SIZE_2_GB: |
| ret = amdgpu_bo_create_kernel(adev, |
| memory_pool->size, |
| memory_pool->align, |
| memory_pool->domain, |
| &memory_pool->bo, |
| &memory_pool->mc_address, |
| &memory_pool->cpu_addr); |
| if (ret) |
| dev_err(adev->dev, "VRAM allocation for dramlog failed!\n"); |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int smu_free_memory_pool(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *memory_pool = &smu_table->memory_pool; |
| |
| if (memory_pool->size == SMU_MEMORY_POOL_SIZE_ZERO) |
| return 0; |
| |
| amdgpu_bo_free_kernel(&memory_pool->bo, |
| &memory_pool->mc_address, |
| &memory_pool->cpu_addr); |
| |
| memset(memory_pool, 0, sizeof(struct smu_table)); |
| |
| return 0; |
| } |
| |
| static int smu_alloc_dummy_read_table(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *dummy_read_1_table = |
| &smu_table->dummy_read_1_table; |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| if (!dummy_read_1_table->size) |
| return 0; |
| |
| ret = amdgpu_bo_create_kernel(adev, |
| dummy_read_1_table->size, |
| dummy_read_1_table->align, |
| dummy_read_1_table->domain, |
| &dummy_read_1_table->bo, |
| &dummy_read_1_table->mc_address, |
| &dummy_read_1_table->cpu_addr); |
| if (ret) |
| dev_err(adev->dev, "VRAM allocation for dummy read table failed!\n"); |
| |
| return ret; |
| } |
| |
| static void smu_free_dummy_read_table(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *dummy_read_1_table = |
| &smu_table->dummy_read_1_table; |
| |
| |
| amdgpu_bo_free_kernel(&dummy_read_1_table->bo, |
| &dummy_read_1_table->mc_address, |
| &dummy_read_1_table->cpu_addr); |
| |
| memset(dummy_read_1_table, 0, sizeof(struct smu_table)); |
| } |
| |
| static int smu_smc_table_sw_init(struct smu_context *smu) |
| { |
| int ret; |
| |
| /** |
| * Create smu_table structure, and init smc tables such as |
| * TABLE_PPTABLE, TABLE_WATERMARKS, TABLE_SMU_METRICS, and etc. |
| */ |
| ret = smu_init_smc_tables(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to init smc tables!\n"); |
| return ret; |
| } |
| |
| /** |
| * Create smu_power_context structure, and allocate smu_dpm_context and |
| * context size to fill the smu_power_context data. |
| */ |
| ret = smu_init_power(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to init smu_init_power!\n"); |
| return ret; |
| } |
| |
| /* |
| * allocate vram bos to store smc table contents. |
| */ |
| ret = smu_init_fb_allocations(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_alloc_memory_pool(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_alloc_dummy_read_table(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_i2c_init(smu); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int smu_smc_table_sw_fini(struct smu_context *smu) |
| { |
| int ret; |
| |
| smu_i2c_fini(smu); |
| |
| smu_free_dummy_read_table(smu); |
| |
| ret = smu_free_memory_pool(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_fini_fb_allocations(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_fini_power(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to init smu_fini_power!\n"); |
| return ret; |
| } |
| |
| ret = smu_fini_smc_tables(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to smu_fini_smc_tables!\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void smu_throttling_logging_work_fn(struct work_struct *work) |
| { |
| struct smu_context *smu = container_of(work, struct smu_context, |
| throttling_logging_work); |
| |
| smu_log_thermal_throttling(smu); |
| } |
| |
| static void smu_interrupt_work_fn(struct work_struct *work) |
| { |
| struct smu_context *smu = container_of(work, struct smu_context, |
| interrupt_work); |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->interrupt_work) |
| smu->ppt_funcs->interrupt_work(smu); |
| } |
| |
| static void smu_swctf_delayed_work_handler(struct work_struct *work) |
| { |
| struct smu_context *smu = |
| container_of(work, struct smu_context, swctf_delayed_work.work); |
| struct smu_temperature_range *range = |
| &smu->thermal_range; |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t hotspot_tmp, size; |
| |
| /* |
| * If the hotspot temperature is confirmed as below SW CTF setting point |
| * after the delay enforced, nothing will be done. |
| * Otherwise, a graceful shutdown will be performed to prevent further damage. |
| */ |
| if (range->software_shutdown_temp && |
| smu->ppt_funcs->read_sensor && |
| !smu->ppt_funcs->read_sensor(smu, |
| AMDGPU_PP_SENSOR_HOTSPOT_TEMP, |
| &hotspot_tmp, |
| &size) && |
| hotspot_tmp / 1000 < range->software_shutdown_temp) |
| return; |
| |
| dev_emerg(adev->dev, "ERROR: GPU over temperature range(SW CTF) detected!\n"); |
| dev_emerg(adev->dev, "ERROR: System is going to shutdown due to GPU SW CTF!\n"); |
| orderly_poweroff(true); |
| } |
| |
| static void smu_init_xgmi_plpd_mode(struct smu_context *smu) |
| { |
| struct smu_dpm_context *dpm_ctxt = &(smu->smu_dpm); |
| struct smu_dpm_policy_ctxt *policy_ctxt; |
| struct smu_dpm_policy *policy; |
| |
| policy = smu_get_pm_policy(smu, PP_PM_POLICY_XGMI_PLPD); |
| if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 2)) { |
| if (policy) |
| policy->current_level = XGMI_PLPD_DEFAULT; |
| return; |
| } |
| |
| /* PMFW put PLPD into default policy after enabling the feature */ |
| if (smu_feature_is_enabled(smu, |
| SMU_FEATURE_XGMI_PER_LINK_PWR_DWN_BIT)) { |
| if (policy) |
| policy->current_level = XGMI_PLPD_DEFAULT; |
| } else { |
| policy_ctxt = dpm_ctxt->dpm_policies; |
| if (policy_ctxt) |
| policy_ctxt->policy_mask &= |
| ~BIT(PP_PM_POLICY_XGMI_PLPD); |
| } |
| } |
| |
| static bool smu_is_workload_profile_available(struct smu_context *smu, |
| u32 profile) |
| { |
| if (profile >= PP_SMC_POWER_PROFILE_COUNT) |
| return false; |
| return smu->workload_map && smu->workload_map[profile].valid_mapping; |
| } |
| |
| static int smu_sw_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| int ret; |
| |
| smu->pool_size = adev->pm.smu_prv_buffer_size; |
| smu->smu_feature.feature_num = SMU_FEATURE_MAX; |
| bitmap_zero(smu->smu_feature.supported, SMU_FEATURE_MAX); |
| bitmap_zero(smu->smu_feature.allowed, SMU_FEATURE_MAX); |
| |
| INIT_WORK(&smu->throttling_logging_work, smu_throttling_logging_work_fn); |
| INIT_WORK(&smu->interrupt_work, smu_interrupt_work_fn); |
| atomic64_set(&smu->throttle_int_counter, 0); |
| smu->watermarks_bitmap = 0; |
| smu->power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; |
| smu->default_power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; |
| |
| atomic_set(&smu->smu_power.power_gate.vcn_gated, 1); |
| atomic_set(&smu->smu_power.power_gate.jpeg_gated, 1); |
| atomic_set(&smu->smu_power.power_gate.vpe_gated, 1); |
| atomic_set(&smu->smu_power.power_gate.umsch_mm_gated, 1); |
| |
| smu->workload_prority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT] = 0; |
| smu->workload_prority[PP_SMC_POWER_PROFILE_FULLSCREEN3D] = 1; |
| smu->workload_prority[PP_SMC_POWER_PROFILE_POWERSAVING] = 2; |
| smu->workload_prority[PP_SMC_POWER_PROFILE_VIDEO] = 3; |
| smu->workload_prority[PP_SMC_POWER_PROFILE_VR] = 4; |
| smu->workload_prority[PP_SMC_POWER_PROFILE_COMPUTE] = 5; |
| smu->workload_prority[PP_SMC_POWER_PROFILE_CUSTOM] = 6; |
| |
| if (smu->is_apu || |
| !smu_is_workload_profile_available(smu, PP_SMC_POWER_PROFILE_FULLSCREEN3D)) |
| smu->workload_mask = 1 << smu->workload_prority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT]; |
| else |
| smu->workload_mask = 1 << smu->workload_prority[PP_SMC_POWER_PROFILE_FULLSCREEN3D]; |
| |
| smu->workload_setting[0] = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; |
| smu->workload_setting[1] = PP_SMC_POWER_PROFILE_FULLSCREEN3D; |
| smu->workload_setting[2] = PP_SMC_POWER_PROFILE_POWERSAVING; |
| smu->workload_setting[3] = PP_SMC_POWER_PROFILE_VIDEO; |
| smu->workload_setting[4] = PP_SMC_POWER_PROFILE_VR; |
| smu->workload_setting[5] = PP_SMC_POWER_PROFILE_COMPUTE; |
| smu->workload_setting[6] = PP_SMC_POWER_PROFILE_CUSTOM; |
| smu->display_config = &adev->pm.pm_display_cfg; |
| |
| smu->smu_dpm.dpm_level = AMD_DPM_FORCED_LEVEL_AUTO; |
| smu->smu_dpm.requested_dpm_level = AMD_DPM_FORCED_LEVEL_AUTO; |
| |
| INIT_DELAYED_WORK(&smu->swctf_delayed_work, |
| smu_swctf_delayed_work_handler); |
| |
| ret = smu_smc_table_sw_init(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to sw init smc table!\n"); |
| return ret; |
| } |
| |
| /* get boot_values from vbios to set revision, gfxclk, and etc. */ |
| ret = smu_get_vbios_bootup_values(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to get VBIOS boot clock values!\n"); |
| return ret; |
| } |
| |
| ret = smu_init_pptable_microcode(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to setup pptable firmware!\n"); |
| return ret; |
| } |
| |
| ret = smu_register_irq_handler(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to register smc irq handler!\n"); |
| return ret; |
| } |
| |
| /* If there is no way to query fan control mode, fan control is not supported */ |
| if (!smu->ppt_funcs->get_fan_control_mode) |
| smu->adev->pm.no_fan = true; |
| |
| return 0; |
| } |
| |
| static int smu_sw_fini(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| int ret; |
| |
| ret = smu_smc_table_sw_fini(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to sw fini smc table!\n"); |
| return ret; |
| } |
| |
| smu_fini_microcode(smu); |
| |
| return 0; |
| } |
| |
| static int smu_get_thermal_temperature_range(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| struct smu_temperature_range *range = |
| &smu->thermal_range; |
| int ret = 0; |
| |
| if (!smu->ppt_funcs->get_thermal_temperature_range) |
| return 0; |
| |
| ret = smu->ppt_funcs->get_thermal_temperature_range(smu, range); |
| if (ret) |
| return ret; |
| |
| adev->pm.dpm.thermal.min_temp = range->min; |
| adev->pm.dpm.thermal.max_temp = range->max; |
| adev->pm.dpm.thermal.max_edge_emergency_temp = range->edge_emergency_max; |
| adev->pm.dpm.thermal.min_hotspot_temp = range->hotspot_min; |
| adev->pm.dpm.thermal.max_hotspot_crit_temp = range->hotspot_crit_max; |
| adev->pm.dpm.thermal.max_hotspot_emergency_temp = range->hotspot_emergency_max; |
| adev->pm.dpm.thermal.min_mem_temp = range->mem_min; |
| adev->pm.dpm.thermal.max_mem_crit_temp = range->mem_crit_max; |
| adev->pm.dpm.thermal.max_mem_emergency_temp = range->mem_emergency_max; |
| |
| return ret; |
| } |
| |
| /** |
| * smu_wbrf_handle_exclusion_ranges - consume the wbrf exclusion ranges |
| * |
| * @smu: smu_context pointer |
| * |
| * Retrieve the wbrf exclusion ranges and send them to PMFW for proper handling. |
| * Returns 0 on success, error on failure. |
| */ |
| static int smu_wbrf_handle_exclusion_ranges(struct smu_context *smu) |
| { |
| struct wbrf_ranges_in_out wbrf_exclusion = {0}; |
| struct freq_band_range *wifi_bands = wbrf_exclusion.band_list; |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t num_of_wbrf_ranges = MAX_NUM_OF_WBRF_RANGES; |
| uint64_t start, end; |
| int ret, i, j; |
| |
| ret = amd_wbrf_retrieve_freq_band(adev->dev, &wbrf_exclusion); |
| if (ret) { |
| dev_err(adev->dev, "Failed to retrieve exclusion ranges!\n"); |
| return ret; |
| } |
| |
| /* |
| * The exclusion ranges array we got might be filled with holes and duplicate |
| * entries. For example: |
| * {(2400, 2500), (0, 0), (6882, 6962), (2400, 2500), (0, 0), (6117, 6189), (0, 0)...} |
| * We need to do some sortups to eliminate those holes and duplicate entries. |
| * Expected output: {(2400, 2500), (6117, 6189), (6882, 6962), (0, 0)...} |
| */ |
| for (i = 0; i < num_of_wbrf_ranges; i++) { |
| start = wifi_bands[i].start; |
| end = wifi_bands[i].end; |
| |
| /* get the last valid entry to fill the intermediate hole */ |
| if (!start && !end) { |
| for (j = num_of_wbrf_ranges - 1; j > i; j--) |
| if (wifi_bands[j].start && wifi_bands[j].end) |
| break; |
| |
| /* no valid entry left */ |
| if (j <= i) |
| break; |
| |
| start = wifi_bands[i].start = wifi_bands[j].start; |
| end = wifi_bands[i].end = wifi_bands[j].end; |
| wifi_bands[j].start = 0; |
| wifi_bands[j].end = 0; |
| num_of_wbrf_ranges = j; |
| } |
| |
| /* eliminate duplicate entries */ |
| for (j = i + 1; j < num_of_wbrf_ranges; j++) { |
| if ((wifi_bands[j].start == start) && (wifi_bands[j].end == end)) { |
| wifi_bands[j].start = 0; |
| wifi_bands[j].end = 0; |
| } |
| } |
| } |
| |
| /* Send the sorted wifi_bands to PMFW */ |
| ret = smu_set_wbrf_exclusion_ranges(smu, wifi_bands); |
| /* Try to set the wifi_bands again */ |
| if (unlikely(ret == -EBUSY)) { |
| mdelay(5); |
| ret = smu_set_wbrf_exclusion_ranges(smu, wifi_bands); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * smu_wbrf_event_handler - handle notify events |
| * |
| * @nb: notifier block |
| * @action: event type |
| * @_arg: event data |
| * |
| * Calls relevant amdgpu function in response to wbrf event |
| * notification from kernel. |
| */ |
| static int smu_wbrf_event_handler(struct notifier_block *nb, |
| unsigned long action, void *_arg) |
| { |
| struct smu_context *smu = container_of(nb, struct smu_context, wbrf_notifier); |
| |
| switch (action) { |
| case WBRF_CHANGED: |
| schedule_delayed_work(&smu->wbrf_delayed_work, |
| msecs_to_jiffies(SMU_WBRF_EVENT_HANDLING_PACE)); |
| break; |
| default: |
| return NOTIFY_DONE; |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| /** |
| * smu_wbrf_delayed_work_handler - callback on delayed work timer expired |
| * |
| * @work: struct work_struct pointer |
| * |
| * Flood is over and driver will consume the latest exclusion ranges. |
| */ |
| static void smu_wbrf_delayed_work_handler(struct work_struct *work) |
| { |
| struct smu_context *smu = container_of(work, struct smu_context, wbrf_delayed_work.work); |
| |
| smu_wbrf_handle_exclusion_ranges(smu); |
| } |
| |
| /** |
| * smu_wbrf_support_check - check wbrf support |
| * |
| * @smu: smu_context pointer |
| * |
| * Verifies the ACPI interface whether wbrf is supported. |
| */ |
| static void smu_wbrf_support_check(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| smu->wbrf_supported = smu_is_asic_wbrf_supported(smu) && amdgpu_wbrf && |
| acpi_amd_wbrf_supported_consumer(adev->dev); |
| |
| if (smu->wbrf_supported) |
| dev_info(adev->dev, "RF interference mitigation is supported\n"); |
| } |
| |
| /** |
| * smu_wbrf_init - init driver wbrf support |
| * |
| * @smu: smu_context pointer |
| * |
| * Verifies the AMD ACPI interfaces and registers with the wbrf |
| * notifier chain if wbrf feature is supported. |
| * Returns 0 on success, error on failure. |
| */ |
| static int smu_wbrf_init(struct smu_context *smu) |
| { |
| int ret; |
| |
| if (!smu->wbrf_supported) |
| return 0; |
| |
| INIT_DELAYED_WORK(&smu->wbrf_delayed_work, smu_wbrf_delayed_work_handler); |
| |
| smu->wbrf_notifier.notifier_call = smu_wbrf_event_handler; |
| ret = amd_wbrf_register_notifier(&smu->wbrf_notifier); |
| if (ret) |
| return ret; |
| |
| /* |
| * Some wifiband exclusion ranges may be already there |
| * before our driver loaded. To make sure our driver |
| * is awared of those exclusion ranges. |
| */ |
| schedule_delayed_work(&smu->wbrf_delayed_work, |
| msecs_to_jiffies(SMU_WBRF_EVENT_HANDLING_PACE)); |
| |
| return 0; |
| } |
| |
| /** |
| * smu_wbrf_fini - tear down driver wbrf support |
| * |
| * @smu: smu_context pointer |
| * |
| * Unregisters with the wbrf notifier chain. |
| */ |
| static void smu_wbrf_fini(struct smu_context *smu) |
| { |
| if (!smu->wbrf_supported) |
| return; |
| |
| amd_wbrf_unregister_notifier(&smu->wbrf_notifier); |
| |
| cancel_delayed_work_sync(&smu->wbrf_delayed_work); |
| } |
| |
| static int smu_smc_hw_setup(struct smu_context *smu) |
| { |
| struct smu_feature *feature = &smu->smu_feature; |
| struct amdgpu_device *adev = smu->adev; |
| uint8_t pcie_gen = 0, pcie_width = 0; |
| uint64_t features_supported; |
| int ret = 0; |
| |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(11, 0, 7): |
| case IP_VERSION(11, 0, 11): |
| case IP_VERSION(11, 5, 0): |
| case IP_VERSION(11, 0, 12): |
| if (adev->in_suspend && smu_is_dpm_running(smu)) { |
| dev_info(adev->dev, "dpm has been enabled\n"); |
| ret = smu_system_features_control(smu, true); |
| if (ret) |
| dev_err(adev->dev, "Failed system features control!\n"); |
| return ret; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| ret = smu_init_display_count(smu, 0); |
| if (ret) { |
| dev_info(adev->dev, "Failed to pre-set display count as 0!\n"); |
| return ret; |
| } |
| |
| ret = smu_set_driver_table_location(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to SetDriverDramAddr!\n"); |
| return ret; |
| } |
| |
| /* |
| * Set PMSTATUSLOG table bo address with SetToolsDramAddr MSG for tools. |
| */ |
| ret = smu_set_tool_table_location(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to SetToolsDramAddr!\n"); |
| return ret; |
| } |
| |
| /* |
| * Use msg SetSystemVirtualDramAddr and DramLogSetDramAddr can notify |
| * pool location. |
| */ |
| ret = smu_notify_memory_pool_location(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to SetDramLogDramAddr!\n"); |
| return ret; |
| } |
| |
| /* |
| * It is assumed the pptable used before runpm is same as |
| * the one used afterwards. Thus, we can reuse the stored |
| * copy and do not need to resetup the pptable again. |
| */ |
| if (!adev->in_runpm) { |
| ret = smu_setup_pptable(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to setup pptable!\n"); |
| return ret; |
| } |
| } |
| |
| /* smu_dump_pptable(smu); */ |
| |
| /* |
| * With SCPM enabled, PSP is responsible for the PPTable transferring |
| * (to SMU). Driver involvement is not needed and permitted. |
| */ |
| if (!adev->scpm_enabled) { |
| /* |
| * Copy pptable bo in the vram to smc with SMU MSGs such as |
| * SetDriverDramAddr and TransferTableDram2Smu. |
| */ |
| ret = smu_write_pptable(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to transfer pptable to SMC!\n"); |
| return ret; |
| } |
| } |
| |
| /* issue Run*Btc msg */ |
| ret = smu_run_btc(smu); |
| if (ret) |
| return ret; |
| |
| /* Enable UclkShadow on wbrf supported */ |
| if (smu->wbrf_supported) { |
| ret = smu_enable_uclk_shadow(smu, true); |
| if (ret) { |
| dev_err(adev->dev, "Failed to enable UclkShadow feature to support wbrf!\n"); |
| return ret; |
| } |
| } |
| |
| /* |
| * With SCPM enabled, these actions(and relevant messages) are |
| * not needed and permitted. |
| */ |
| if (!adev->scpm_enabled) { |
| ret = smu_feature_set_allowed_mask(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to set driver allowed features mask!\n"); |
| return ret; |
| } |
| } |
| |
| ret = smu_system_features_control(smu, true); |
| if (ret) { |
| dev_err(adev->dev, "Failed to enable requested dpm features!\n"); |
| return ret; |
| } |
| |
| smu_init_xgmi_plpd_mode(smu); |
| |
| ret = smu_feature_get_enabled_mask(smu, &features_supported); |
| if (ret) { |
| dev_err(adev->dev, "Failed to retrieve supported dpm features!\n"); |
| return ret; |
| } |
| bitmap_copy(feature->supported, |
| (unsigned long *)&features_supported, |
| feature->feature_num); |
| |
| if (!smu_is_dpm_running(smu)) |
| dev_info(adev->dev, "dpm has been disabled\n"); |
| |
| /* |
| * Set initialized values (get from vbios) to dpm tables context such as |
| * gfxclk, memclk, dcefclk, and etc. And enable the DPM feature for each |
| * type of clks. |
| */ |
| ret = smu_set_default_dpm_table(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to setup default dpm clock tables!\n"); |
| return ret; |
| } |
| |
| if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4) |
| pcie_gen = 3; |
| else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3) |
| pcie_gen = 2; |
| else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2) |
| pcie_gen = 1; |
| else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1) |
| pcie_gen = 0; |
| |
| /* Bit 31:16: LCLK DPM level. 0 is DPM0, and 1 is DPM1 |
| * Bit 15:8: PCIE GEN, 0 to 3 corresponds to GEN1 to GEN4 |
| * Bit 7:0: PCIE lane width, 1 to 7 corresponds is x1 to x32 |
| */ |
| if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16) |
| pcie_width = 6; |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12) |
| pcie_width = 5; |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8) |
| pcie_width = 4; |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4) |
| pcie_width = 3; |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2) |
| pcie_width = 2; |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1) |
| pcie_width = 1; |
| ret = smu_update_pcie_parameters(smu, pcie_gen, pcie_width); |
| if (ret) { |
| dev_err(adev->dev, "Attempt to override pcie params failed!\n"); |
| return ret; |
| } |
| |
| ret = smu_get_thermal_temperature_range(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to get thermal temperature ranges!\n"); |
| return ret; |
| } |
| |
| ret = smu_enable_thermal_alert(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to enable thermal alert!\n"); |
| return ret; |
| } |
| |
| ret = smu_notify_display_change(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to notify display change!\n"); |
| return ret; |
| } |
| |
| /* |
| * Set min deep sleep dce fclk with bootup value from vbios via |
| * SetMinDeepSleepDcefclk MSG. |
| */ |
| ret = smu_set_min_dcef_deep_sleep(smu, |
| smu->smu_table.boot_values.dcefclk / 100); |
| if (ret) { |
| dev_err(adev->dev, "Error setting min deepsleep dcefclk\n"); |
| return ret; |
| } |
| |
| /* Init wbrf support. Properly setup the notifier */ |
| ret = smu_wbrf_init(smu); |
| if (ret) |
| dev_err(adev->dev, "Error during wbrf init call\n"); |
| |
| return ret; |
| } |
| |
| static int smu_start_smc_engine(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| smu->smc_fw_state = SMU_FW_INIT; |
| |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) { |
| if (amdgpu_ip_version(adev, MP1_HWIP, 0) < IP_VERSION(11, 0, 0)) { |
| if (smu->ppt_funcs->load_microcode) { |
| ret = smu->ppt_funcs->load_microcode(smu); |
| if (ret) |
| return ret; |
| } |
| } |
| } |
| |
| if (smu->ppt_funcs->check_fw_status) { |
| ret = smu->ppt_funcs->check_fw_status(smu); |
| if (ret) { |
| dev_err(adev->dev, "SMC is not ready\n"); |
| return ret; |
| } |
| } |
| |
| /* |
| * Send msg GetDriverIfVersion to check if the return value is equal |
| * with DRIVER_IF_VERSION of smc header. |
| */ |
| ret = smu_check_fw_version(smu); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| static int smu_hw_init(void *handle) |
| { |
| int ret; |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| |
| if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev)) { |
| smu->pm_enabled = false; |
| return 0; |
| } |
| |
| ret = smu_start_smc_engine(smu); |
| if (ret) { |
| dev_err(adev->dev, "SMC engine is not correctly up!\n"); |
| return ret; |
| } |
| |
| /* |
| * Check whether wbrf is supported. This needs to be done |
| * before SMU setup starts since part of SMU configuration |
| * relies on this. |
| */ |
| smu_wbrf_support_check(smu); |
| |
| if (smu->is_apu) { |
| ret = smu_set_gfx_imu_enable(smu); |
| if (ret) |
| return ret; |
| smu_dpm_set_vcn_enable(smu, true); |
| smu_dpm_set_jpeg_enable(smu, true); |
| smu_dpm_set_vpe_enable(smu, true); |
| smu_dpm_set_umsch_mm_enable(smu, true); |
| smu_set_mall_enable(smu); |
| smu_set_gfx_cgpg(smu, true); |
| } |
| |
| if (!smu->pm_enabled) |
| return 0; |
| |
| ret = smu_get_driver_allowed_feature_mask(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_smc_hw_setup(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to setup smc hw!\n"); |
| return ret; |
| } |
| |
| /* |
| * Move maximum sustainable clock retrieving here considering |
| * 1. It is not needed on resume(from S3). |
| * 2. DAL settings come between .hw_init and .late_init of SMU. |
| * And DAL needs to know the maximum sustainable clocks. Thus |
| * it cannot be put in .late_init(). |
| */ |
| ret = smu_init_max_sustainable_clocks(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to init max sustainable clocks!\n"); |
| return ret; |
| } |
| |
| adev->pm.dpm_enabled = true; |
| |
| dev_info(adev->dev, "SMU is initialized successfully!\n"); |
| |
| return 0; |
| } |
| |
| static int smu_disable_dpms(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| bool use_baco = !smu->is_apu && |
| ((amdgpu_in_reset(adev) && |
| (amdgpu_asic_reset_method(adev) == AMD_RESET_METHOD_BACO)) || |
| ((adev->in_runpm || adev->in_s4) && amdgpu_asic_supports_baco(adev))); |
| |
| /* |
| * For SMU 13.0.0 and 13.0.7, PMFW will handle the DPM features(disablement or others) |
| * properly on suspend/reset/unload. Driver involvement may cause some unexpected issues. |
| */ |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(13, 0, 0): |
| case IP_VERSION(13, 0, 7): |
| case IP_VERSION(13, 0, 10): |
| case IP_VERSION(14, 0, 2): |
| case IP_VERSION(14, 0, 3): |
| return 0; |
| default: |
| break; |
| } |
| |
| /* |
| * For custom pptable uploading, skip the DPM features |
| * disable process on Navi1x ASICs. |
| * - As the gfx related features are under control of |
| * RLC on those ASICs. RLC reinitialization will be |
| * needed to reenable them. That will cost much more |
| * efforts. |
| * |
| * - SMU firmware can handle the DPM reenablement |
| * properly. |
| */ |
| if (smu->uploading_custom_pp_table) { |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(11, 0, 0): |
| case IP_VERSION(11, 0, 5): |
| case IP_VERSION(11, 0, 9): |
| case IP_VERSION(11, 0, 7): |
| case IP_VERSION(11, 0, 11): |
| case IP_VERSION(11, 5, 0): |
| case IP_VERSION(11, 0, 12): |
| case IP_VERSION(11, 0, 13): |
| return 0; |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * For Sienna_Cichlid, PMFW will handle the features disablement properly |
| * on BACO in. Driver involvement is unnecessary. |
| */ |
| if (use_baco) { |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(11, 0, 7): |
| case IP_VERSION(11, 0, 0): |
| case IP_VERSION(11, 0, 5): |
| case IP_VERSION(11, 0, 9): |
| case IP_VERSION(13, 0, 7): |
| return 0; |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * For GFX11 and subsequent APUs, PMFW will handle the features disablement properly |
| * for gpu reset and S0i3 cases. Driver involvement is unnecessary. |
| */ |
| if (IP_VERSION_MAJ(amdgpu_ip_version(adev, GC_HWIP, 0)) >= 11 && |
| smu->is_apu && (amdgpu_in_reset(adev) || adev->in_s0ix)) |
| return 0; |
| |
| /* |
| * For gpu reset, runpm and hibernation through BACO, |
| * BACO feature has to be kept enabled. |
| */ |
| if (use_baco && smu_feature_is_enabled(smu, SMU_FEATURE_BACO_BIT)) { |
| ret = smu_disable_all_features_with_exception(smu, |
| SMU_FEATURE_BACO_BIT); |
| if (ret) |
| dev_err(adev->dev, "Failed to disable smu features except BACO.\n"); |
| } else { |
| /* DisableAllSmuFeatures message is not permitted with SCPM enabled */ |
| if (!adev->scpm_enabled) { |
| ret = smu_system_features_control(smu, false); |
| if (ret) |
| dev_err(adev->dev, "Failed to disable smu features.\n"); |
| } |
| } |
| |
| /* Notify SMU RLC is going to be off, stop RLC and SMU interaction. |
| * otherwise SMU will hang while interacting with RLC if RLC is halted |
| * this is a WA for Vangogh asic which fix the SMU hang issue. |
| */ |
| ret = smu_notify_rlc_state(smu, false); |
| if (ret) { |
| dev_err(adev->dev, "Fail to notify rlc status!\n"); |
| return ret; |
| } |
| |
| if (amdgpu_ip_version(adev, GC_HWIP, 0) >= IP_VERSION(9, 4, 2) && |
| !((adev->flags & AMD_IS_APU) && adev->gfx.imu.funcs) && |
| !amdgpu_sriov_vf(adev) && adev->gfx.rlc.funcs->stop) |
| adev->gfx.rlc.funcs->stop(adev); |
| |
| return ret; |
| } |
| |
| static int smu_smc_hw_cleanup(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| smu_wbrf_fini(smu); |
| |
| cancel_work_sync(&smu->throttling_logging_work); |
| cancel_work_sync(&smu->interrupt_work); |
| |
| ret = smu_disable_thermal_alert(smu); |
| if (ret) { |
| dev_err(adev->dev, "Fail to disable thermal alert!\n"); |
| return ret; |
| } |
| |
| cancel_delayed_work_sync(&smu->swctf_delayed_work); |
| |
| ret = smu_disable_dpms(smu); |
| if (ret) { |
| dev_err(adev->dev, "Fail to disable dpm features!\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int smu_reset_mp1_state(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| if ((!adev->in_runpm) && (!adev->in_suspend) && |
| (!amdgpu_in_reset(adev)) && amdgpu_ip_version(adev, MP1_HWIP, 0) == |
| IP_VERSION(13, 0, 10) && |
| !amdgpu_device_has_display_hardware(adev)) |
| ret = smu_set_mp1_state(smu, PP_MP1_STATE_UNLOAD); |
| |
| return ret; |
| } |
| |
| static int smu_hw_fini(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| int ret; |
| |
| if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev)) |
| return 0; |
| |
| smu_dpm_set_vcn_enable(smu, false); |
| smu_dpm_set_jpeg_enable(smu, false); |
| smu_dpm_set_vpe_enable(smu, false); |
| smu_dpm_set_umsch_mm_enable(smu, false); |
| |
| adev->vcn.cur_state = AMD_PG_STATE_GATE; |
| adev->jpeg.cur_state = AMD_PG_STATE_GATE; |
| |
| if (!smu->pm_enabled) |
| return 0; |
| |
| adev->pm.dpm_enabled = false; |
| |
| ret = smu_smc_hw_cleanup(smu); |
| if (ret) |
| return ret; |
| |
| ret = smu_reset_mp1_state(smu); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void smu_late_fini(void *handle) |
| { |
| struct amdgpu_device *adev = handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| |
| kfree(smu); |
| } |
| |
| static int smu_reset(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret; |
| |
| ret = smu_hw_fini(adev); |
| if (ret) |
| return ret; |
| |
| ret = smu_hw_init(adev); |
| if (ret) |
| return ret; |
| |
| ret = smu_late_init(adev); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int smu_suspend(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| int ret; |
| uint64_t count; |
| |
| if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev)) |
| return 0; |
| |
| if (!smu->pm_enabled) |
| return 0; |
| |
| adev->pm.dpm_enabled = false; |
| |
| ret = smu_smc_hw_cleanup(smu); |
| if (ret) |
| return ret; |
| |
| smu->watermarks_bitmap &= ~(WATERMARKS_LOADED); |
| |
| smu_set_gfx_cgpg(smu, false); |
| |
| /* |
| * pwfw resets entrycount when device is suspended, so we save the |
| * last value to be used when we resume to keep it consistent |
| */ |
| ret = smu_get_entrycount_gfxoff(smu, &count); |
| if (!ret) |
| adev->gfx.gfx_off_entrycount = count; |
| |
| return 0; |
| } |
| |
| static int smu_resume(void *handle) |
| { |
| int ret; |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| |
| if (amdgpu_sriov_vf(adev)&& !amdgpu_sriov_is_pp_one_vf(adev)) |
| return 0; |
| |
| if (!smu->pm_enabled) |
| return 0; |
| |
| dev_info(adev->dev, "SMU is resuming...\n"); |
| |
| ret = smu_start_smc_engine(smu); |
| if (ret) { |
| dev_err(adev->dev, "SMC engine is not correctly up!\n"); |
| return ret; |
| } |
| |
| ret = smu_smc_hw_setup(smu); |
| if (ret) { |
| dev_err(adev->dev, "Failed to setup smc hw!\n"); |
| return ret; |
| } |
| |
| ret = smu_set_gfx_imu_enable(smu); |
| if (ret) |
| return ret; |
| |
| smu_set_gfx_cgpg(smu, true); |
| |
| smu->disable_uclk_switch = 0; |
| |
| adev->pm.dpm_enabled = true; |
| |
| dev_info(adev->dev, "SMU is resumed successfully!\n"); |
| |
| return 0; |
| } |
| |
| static int smu_display_configuration_change(void *handle, |
| const struct amd_pp_display_configuration *display_config) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!display_config) |
| return -EINVAL; |
| |
| smu_set_min_dcef_deep_sleep(smu, |
| display_config->min_dcef_deep_sleep_set_clk / 100); |
| |
| return 0; |
| } |
| |
| static int smu_set_clockgating_state(void *handle, |
| enum amd_clockgating_state state) |
| { |
| return 0; |
| } |
| |
| static int smu_set_powergating_state(void *handle, |
| enum amd_powergating_state state) |
| { |
| return 0; |
| } |
| |
| static int smu_enable_umd_pstate(void *handle, |
| enum amd_dpm_forced_level *level) |
| { |
| uint32_t profile_mode_mask = AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD | |
| AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK | |
| AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK | |
| AMD_DPM_FORCED_LEVEL_PROFILE_PEAK; |
| |
| struct smu_context *smu = (struct smu_context*)(handle); |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); |
| |
| if (!smu->is_apu && !smu_dpm_ctx->dpm_context) |
| return -EINVAL; |
| |
| if (!(smu_dpm_ctx->dpm_level & profile_mode_mask)) { |
| /* enter umd pstate, save current level, disable gfx cg*/ |
| if (*level & profile_mode_mask) { |
| smu_dpm_ctx->saved_dpm_level = smu_dpm_ctx->dpm_level; |
| smu_gpo_control(smu, false); |
| smu_gfx_ulv_control(smu, false); |
| smu_deep_sleep_control(smu, false); |
| amdgpu_asic_update_umd_stable_pstate(smu->adev, true); |
| } |
| } else { |
| /* exit umd pstate, restore level, enable gfx cg*/ |
| if (!(*level & profile_mode_mask)) { |
| if (*level == AMD_DPM_FORCED_LEVEL_PROFILE_EXIT) |
| *level = smu_dpm_ctx->saved_dpm_level; |
| amdgpu_asic_update_umd_stable_pstate(smu->adev, false); |
| smu_deep_sleep_control(smu, true); |
| smu_gfx_ulv_control(smu, true); |
| smu_gpo_control(smu, true); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int smu_bump_power_profile_mode(struct smu_context *smu, |
| long *param, |
| uint32_t param_size) |
| { |
| int ret = 0; |
| |
| if (smu->ppt_funcs->set_power_profile_mode) |
| ret = smu->ppt_funcs->set_power_profile_mode(smu, param, param_size); |
| |
| return ret; |
| } |
| |
| static int smu_adjust_power_state_dynamic(struct smu_context *smu, |
| enum amd_dpm_forced_level level, |
| bool skip_display_settings, |
| bool init) |
| { |
| int ret = 0; |
| int index = 0; |
| long workload[1]; |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); |
| |
| if (!skip_display_settings) { |
| ret = smu_display_config_changed(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to change display config!"); |
| return ret; |
| } |
| } |
| |
| ret = smu_apply_clocks_adjust_rules(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to apply clocks adjust rules!"); |
| return ret; |
| } |
| |
| if (!skip_display_settings) { |
| ret = smu_notify_smc_display_config(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to notify smc display config!"); |
| return ret; |
| } |
| } |
| |
| if (smu_dpm_ctx->dpm_level != level) { |
| ret = smu_asic_set_performance_level(smu, level); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to set performance level!"); |
| return ret; |
| } |
| |
| /* update the saved copy */ |
| smu_dpm_ctx->dpm_level = level; |
| } |
| |
| if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL && |
| smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM) { |
| index = fls(smu->workload_mask); |
| index = index > 0 && index <= WORKLOAD_POLICY_MAX ? index - 1 : 0; |
| workload[0] = smu->workload_setting[index]; |
| |
| if (init || smu->power_profile_mode != workload[0]) |
| smu_bump_power_profile_mode(smu, workload, 0); |
| } |
| |
| return ret; |
| } |
| |
| static int smu_handle_task(struct smu_context *smu, |
| enum amd_dpm_forced_level level, |
| enum amd_pp_task task_id) |
| { |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| switch (task_id) { |
| case AMD_PP_TASK_DISPLAY_CONFIG_CHANGE: |
| ret = smu_pre_display_config_changed(smu); |
| if (ret) |
| return ret; |
| ret = smu_adjust_power_state_dynamic(smu, level, false, false); |
| break; |
| case AMD_PP_TASK_COMPLETE_INIT: |
| ret = smu_adjust_power_state_dynamic(smu, level, true, true); |
| break; |
| case AMD_PP_TASK_READJUST_POWER_STATE: |
| ret = smu_adjust_power_state_dynamic(smu, level, true, false); |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int smu_handle_dpm_task(void *handle, |
| enum amd_pp_task task_id, |
| enum amd_pm_state_type *user_state) |
| { |
| struct smu_context *smu = handle; |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| |
| return smu_handle_task(smu, smu_dpm->dpm_level, task_id); |
| |
| } |
| |
| static int smu_switch_power_profile(void *handle, |
| enum PP_SMC_POWER_PROFILE type, |
| bool en) |
| { |
| struct smu_context *smu = handle; |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); |
| long workload[1]; |
| uint32_t index; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!(type < PP_SMC_POWER_PROFILE_CUSTOM)) |
| return -EINVAL; |
| |
| if (!en) { |
| smu->workload_mask &= ~(1 << smu->workload_prority[type]); |
| index = fls(smu->workload_mask); |
| index = index > 0 && index <= WORKLOAD_POLICY_MAX ? index - 1 : 0; |
| workload[0] = smu->workload_setting[index]; |
| } else { |
| smu->workload_mask |= (1 << smu->workload_prority[type]); |
| index = fls(smu->workload_mask); |
| index = index <= WORKLOAD_POLICY_MAX ? index - 1 : 0; |
| workload[0] = smu->workload_setting[index]; |
| } |
| |
| if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL && |
| smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM) |
| smu_bump_power_profile_mode(smu, workload, 0); |
| |
| return 0; |
| } |
| |
| static enum amd_dpm_forced_level smu_get_performance_level(void *handle) |
| { |
| struct smu_context *smu = handle; |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->is_apu && !smu_dpm_ctx->dpm_context) |
| return -EINVAL; |
| |
| return smu_dpm_ctx->dpm_level; |
| } |
| |
| static int smu_force_performance_level(void *handle, |
| enum amd_dpm_forced_level level) |
| { |
| struct smu_context *smu = handle; |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->is_apu && !smu_dpm_ctx->dpm_context) |
| return -EINVAL; |
| |
| ret = smu_enable_umd_pstate(smu, &level); |
| if (ret) |
| return ret; |
| |
| ret = smu_handle_task(smu, level, |
| AMD_PP_TASK_READJUST_POWER_STATE); |
| |
| /* reset user dpm clock state */ |
| if (!ret && smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL) { |
| memset(smu->user_dpm_profile.clk_mask, 0, sizeof(smu->user_dpm_profile.clk_mask)); |
| smu->user_dpm_profile.clk_dependency = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int smu_set_display_count(void *handle, uint32_t count) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| return smu_init_display_count(smu, count); |
| } |
| |
| static int smu_force_smuclk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t mask) |
| { |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL) { |
| dev_dbg(smu->adev->dev, "force clock level is for dpm manual mode only.\n"); |
| return -EINVAL; |
| } |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->force_clk_levels) { |
| ret = smu->ppt_funcs->force_clk_levels(smu, clk_type, mask); |
| if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { |
| smu->user_dpm_profile.clk_mask[clk_type] = mask; |
| smu_set_user_clk_dependencies(smu, clk_type); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int smu_force_ppclk_levels(void *handle, |
| enum pp_clock_type type, |
| uint32_t mask) |
| { |
| struct smu_context *smu = handle; |
| enum smu_clk_type clk_type; |
| |
| switch (type) { |
| case PP_SCLK: |
| clk_type = SMU_SCLK; break; |
| case PP_MCLK: |
| clk_type = SMU_MCLK; break; |
| case PP_PCIE: |
| clk_type = SMU_PCIE; break; |
| case PP_SOCCLK: |
| clk_type = SMU_SOCCLK; break; |
| case PP_FCLK: |
| clk_type = SMU_FCLK; break; |
| case PP_DCEFCLK: |
| clk_type = SMU_DCEFCLK; break; |
| case PP_VCLK: |
| clk_type = SMU_VCLK; break; |
| case PP_VCLK1: |
| clk_type = SMU_VCLK1; break; |
| case PP_DCLK: |
| clk_type = SMU_DCLK; break; |
| case PP_DCLK1: |
| clk_type = SMU_DCLK1; break; |
| case OD_SCLK: |
| clk_type = SMU_OD_SCLK; break; |
| case OD_MCLK: |
| clk_type = SMU_OD_MCLK; break; |
| case OD_VDDC_CURVE: |
| clk_type = SMU_OD_VDDC_CURVE; break; |
| case OD_RANGE: |
| clk_type = SMU_OD_RANGE; break; |
| default: |
| return -EINVAL; |
| } |
| |
| return smu_force_smuclk_levels(smu, clk_type, mask); |
| } |
| |
| /* |
| * On system suspending or resetting, the dpm_enabled |
| * flag will be cleared. So that those SMU services which |
| * are not supported will be gated. |
| * However, the mp1 state setting should still be granted |
| * even if the dpm_enabled cleared. |
| */ |
| static int smu_set_mp1_state(void *handle, |
| enum pp_mp1_state mp1_state) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs && |
| smu->ppt_funcs->set_mp1_state) |
| ret = smu->ppt_funcs->set_mp1_state(smu, mp1_state); |
| |
| return ret; |
| } |
| |
| static int smu_set_df_cstate(void *handle, |
| enum pp_df_cstate state) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs || !smu->ppt_funcs->set_df_cstate) |
| return 0; |
| |
| ret = smu->ppt_funcs->set_df_cstate(smu, state); |
| if (ret) |
| dev_err(smu->adev->dev, "[SetDfCstate] failed!\n"); |
| |
| return ret; |
| } |
| |
| int smu_write_watermarks_table(struct smu_context *smu) |
| { |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| return smu_set_watermarks_table(smu, NULL); |
| } |
| |
| static int smu_set_watermarks_for_clock_ranges(void *handle, |
| struct pp_smu_wm_range_sets *clock_ranges) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->disable_watermark) |
| return 0; |
| |
| return smu_set_watermarks_table(smu, clock_ranges); |
| } |
| |
| int smu_set_ac_dc(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| /* controlled by firmware */ |
| if (smu->dc_controlled_by_gpio) |
| return 0; |
| |
| ret = smu_set_power_source(smu, |
| smu->adev->pm.ac_power ? SMU_POWER_SOURCE_AC : |
| SMU_POWER_SOURCE_DC); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to switch to %s mode!\n", |
| smu->adev->pm.ac_power ? "AC" : "DC"); |
| |
| return ret; |
| } |
| |
| const struct amd_ip_funcs smu_ip_funcs = { |
| .name = "smu", |
| .early_init = smu_early_init, |
| .late_init = smu_late_init, |
| .sw_init = smu_sw_init, |
| .sw_fini = smu_sw_fini, |
| .hw_init = smu_hw_init, |
| .hw_fini = smu_hw_fini, |
| .late_fini = smu_late_fini, |
| .suspend = smu_suspend, |
| .resume = smu_resume, |
| .is_idle = NULL, |
| .check_soft_reset = NULL, |
| .wait_for_idle = NULL, |
| .soft_reset = NULL, |
| .set_clockgating_state = smu_set_clockgating_state, |
| .set_powergating_state = smu_set_powergating_state, |
| }; |
| |
| const struct amdgpu_ip_block_version smu_v11_0_ip_block = { |
| .type = AMD_IP_BLOCK_TYPE_SMC, |
| .major = 11, |
| .minor = 0, |
| .rev = 0, |
| .funcs = &smu_ip_funcs, |
| }; |
| |
| const struct amdgpu_ip_block_version smu_v12_0_ip_block = { |
| .type = AMD_IP_BLOCK_TYPE_SMC, |
| .major = 12, |
| .minor = 0, |
| .rev = 0, |
| .funcs = &smu_ip_funcs, |
| }; |
| |
| const struct amdgpu_ip_block_version smu_v13_0_ip_block = { |
| .type = AMD_IP_BLOCK_TYPE_SMC, |
| .major = 13, |
| .minor = 0, |
| .rev = 0, |
| .funcs = &smu_ip_funcs, |
| }; |
| |
| const struct amdgpu_ip_block_version smu_v14_0_ip_block = { |
| .type = AMD_IP_BLOCK_TYPE_SMC, |
| .major = 14, |
| .minor = 0, |
| .rev = 0, |
| .funcs = &smu_ip_funcs, |
| }; |
| |
| static int smu_load_microcode(void *handle) |
| { |
| struct smu_context *smu = handle; |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| if (!smu->pm_enabled) |
| return -EOPNOTSUPP; |
| |
| /* This should be used for non PSP loading */ |
| if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) |
| return 0; |
| |
| if (smu->ppt_funcs->load_microcode) { |
| ret = smu->ppt_funcs->load_microcode(smu); |
| if (ret) { |
| dev_err(adev->dev, "Load microcode failed\n"); |
| return ret; |
| } |
| } |
| |
| if (smu->ppt_funcs->check_fw_status) { |
| ret = smu->ppt_funcs->check_fw_status(smu); |
| if (ret) { |
| dev_err(adev->dev, "SMC is not ready\n"); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int smu_set_gfx_cgpg(struct smu_context *smu, bool enabled) |
| { |
| int ret = 0; |
| |
| if (smu->ppt_funcs->set_gfx_cgpg) |
| ret = smu->ppt_funcs->set_gfx_cgpg(smu, enabled); |
| |
| return ret; |
| } |
| |
| static int smu_set_fan_speed_rpm(void *handle, uint32_t speed) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->set_fan_speed_rpm) |
| return -EOPNOTSUPP; |
| |
| if (speed == U32_MAX) |
| return -EINVAL; |
| |
| ret = smu->ppt_funcs->set_fan_speed_rpm(smu, speed); |
| if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { |
| smu->user_dpm_profile.flags |= SMU_CUSTOM_FAN_SPEED_RPM; |
| smu->user_dpm_profile.fan_speed_rpm = speed; |
| |
| /* Override custom PWM setting as they cannot co-exist */ |
| smu->user_dpm_profile.flags &= ~SMU_CUSTOM_FAN_SPEED_PWM; |
| smu->user_dpm_profile.fan_speed_pwm = 0; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * smu_get_power_limit - Request one of the SMU Power Limits |
| * |
| * @handle: pointer to smu context |
| * @limit: requested limit is written back to this variable |
| * @pp_limit_level: &pp_power_limit_level which limit of the power to return |
| * @pp_power_type: &pp_power_type type of power |
| * Return: 0 on success, <0 on error |
| * |
| */ |
| int smu_get_power_limit(void *handle, |
| uint32_t *limit, |
| enum pp_power_limit_level pp_limit_level, |
| enum pp_power_type pp_power_type) |
| { |
| struct smu_context *smu = handle; |
| struct amdgpu_device *adev = smu->adev; |
| enum smu_ppt_limit_level limit_level; |
| uint32_t limit_type; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| switch (pp_power_type) { |
| case PP_PWR_TYPE_SUSTAINED: |
| limit_type = SMU_DEFAULT_PPT_LIMIT; |
| break; |
| case PP_PWR_TYPE_FAST: |
| limit_type = SMU_FAST_PPT_LIMIT; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| switch (pp_limit_level) { |
| case PP_PWR_LIMIT_CURRENT: |
| limit_level = SMU_PPT_LIMIT_CURRENT; |
| break; |
| case PP_PWR_LIMIT_DEFAULT: |
| limit_level = SMU_PPT_LIMIT_DEFAULT; |
| break; |
| case PP_PWR_LIMIT_MAX: |
| limit_level = SMU_PPT_LIMIT_MAX; |
| break; |
| case PP_PWR_LIMIT_MIN: |
| limit_level = SMU_PPT_LIMIT_MIN; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| if (limit_type != SMU_DEFAULT_PPT_LIMIT) { |
| if (smu->ppt_funcs->get_ppt_limit) |
| ret = smu->ppt_funcs->get_ppt_limit(smu, limit, limit_type, limit_level); |
| } else { |
| switch (limit_level) { |
| case SMU_PPT_LIMIT_CURRENT: |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(13, 0, 2): |
| case IP_VERSION(13, 0, 6): |
| case IP_VERSION(13, 0, 14): |
| case IP_VERSION(11, 0, 7): |
| case IP_VERSION(11, 0, 11): |
| case IP_VERSION(11, 0, 12): |
| case IP_VERSION(11, 0, 13): |
| ret = smu_get_asic_power_limits(smu, |
| &smu->current_power_limit, |
| NULL, NULL, NULL); |
| break; |
| default: |
| break; |
| } |
| *limit = smu->current_power_limit; |
| break; |
| case SMU_PPT_LIMIT_DEFAULT: |
| *limit = smu->default_power_limit; |
| break; |
| case SMU_PPT_LIMIT_MAX: |
| *limit = smu->max_power_limit; |
| break; |
| case SMU_PPT_LIMIT_MIN: |
| *limit = smu->min_power_limit; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int smu_set_power_limit(void *handle, uint32_t limit) |
| { |
| struct smu_context *smu = handle; |
| uint32_t limit_type = limit >> 24; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| limit &= (1<<24)-1; |
| if (limit_type != SMU_DEFAULT_PPT_LIMIT) |
| if (smu->ppt_funcs->set_power_limit) |
| return smu->ppt_funcs->set_power_limit(smu, limit_type, limit); |
| |
| if ((limit > smu->max_power_limit) || (limit < smu->min_power_limit)) { |
| dev_err(smu->adev->dev, |
| "New power limit (%d) is out of range [%d,%d]\n", |
| limit, smu->min_power_limit, smu->max_power_limit); |
| return -EINVAL; |
| } |
| |
| if (!limit) |
| limit = smu->current_power_limit; |
| |
| if (smu->ppt_funcs->set_power_limit) { |
| ret = smu->ppt_funcs->set_power_limit(smu, limit_type, limit); |
| if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) |
| smu->user_dpm_profile.power_limit = limit; |
| } |
| |
| return ret; |
| } |
| |
| static int smu_print_smuclk_levels(struct smu_context *smu, enum smu_clk_type clk_type, char *buf) |
| { |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->print_clk_levels) |
| ret = smu->ppt_funcs->print_clk_levels(smu, clk_type, buf); |
| |
| return ret; |
| } |
| |
| static enum smu_clk_type smu_convert_to_smuclk(enum pp_clock_type type) |
| { |
| enum smu_clk_type clk_type; |
| |
| switch (type) { |
| case PP_SCLK: |
| clk_type = SMU_SCLK; break; |
| case PP_MCLK: |
| clk_type = SMU_MCLK; break; |
| case PP_PCIE: |
| clk_type = SMU_PCIE; break; |
| case PP_SOCCLK: |
| clk_type = SMU_SOCCLK; break; |
| case PP_FCLK: |
| clk_type = SMU_FCLK; break; |
| case PP_DCEFCLK: |
| clk_type = SMU_DCEFCLK; break; |
| case PP_VCLK: |
| clk_type = SMU_VCLK; break; |
| case PP_VCLK1: |
| clk_type = SMU_VCLK1; break; |
| case PP_DCLK: |
| clk_type = SMU_DCLK; break; |
| case PP_DCLK1: |
| clk_type = SMU_DCLK1; break; |
| case OD_SCLK: |
| clk_type = SMU_OD_SCLK; break; |
| case OD_MCLK: |
| clk_type = SMU_OD_MCLK; break; |
| case OD_VDDC_CURVE: |
| clk_type = SMU_OD_VDDC_CURVE; break; |
| case OD_RANGE: |
| clk_type = SMU_OD_RANGE; break; |
| case OD_VDDGFX_OFFSET: |
| clk_type = SMU_OD_VDDGFX_OFFSET; break; |
| case OD_CCLK: |
| clk_type = SMU_OD_CCLK; break; |
| case OD_FAN_CURVE: |
| clk_type = SMU_OD_FAN_CURVE; break; |
| case OD_ACOUSTIC_LIMIT: |
| clk_type = SMU_OD_ACOUSTIC_LIMIT; break; |
| case OD_ACOUSTIC_TARGET: |
| clk_type = SMU_OD_ACOUSTIC_TARGET; break; |
| case OD_FAN_TARGET_TEMPERATURE: |
| clk_type = SMU_OD_FAN_TARGET_TEMPERATURE; break; |
| case OD_FAN_MINIMUM_PWM: |
| clk_type = SMU_OD_FAN_MINIMUM_PWM; break; |
| default: |
| clk_type = SMU_CLK_COUNT; break; |
| } |
| |
| return clk_type; |
| } |
| |
| static int smu_print_ppclk_levels(void *handle, |
| enum pp_clock_type type, |
| char *buf) |
| { |
| struct smu_context *smu = handle; |
| enum smu_clk_type clk_type; |
| |
| clk_type = smu_convert_to_smuclk(type); |
| if (clk_type == SMU_CLK_COUNT) |
| return -EINVAL; |
| |
| return smu_print_smuclk_levels(smu, clk_type, buf); |
| } |
| |
| static int smu_emit_ppclk_levels(void *handle, enum pp_clock_type type, char *buf, int *offset) |
| { |
| struct smu_context *smu = handle; |
| enum smu_clk_type clk_type; |
| |
| clk_type = smu_convert_to_smuclk(type); |
| if (clk_type == SMU_CLK_COUNT) |
| return -EINVAL; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->emit_clk_levels) |
| return -ENOENT; |
| |
| return smu->ppt_funcs->emit_clk_levels(smu, clk_type, buf, offset); |
| |
| } |
| |
| static int smu_od_edit_dpm_table(void *handle, |
| enum PP_OD_DPM_TABLE_COMMAND type, |
| long *input, uint32_t size) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->od_edit_dpm_table) { |
| ret = smu->ppt_funcs->od_edit_dpm_table(smu, type, input, size); |
| } |
| |
| return ret; |
| } |
| |
| static int smu_read_sensor(void *handle, |
| int sensor, |
| void *data, |
| int *size_arg) |
| { |
| struct smu_context *smu = handle; |
| struct smu_umd_pstate_table *pstate_table = |
| &smu->pstate_table; |
| int ret = 0; |
| uint32_t *size, size_val; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!data || !size_arg) |
| return -EINVAL; |
| |
| size_val = *size_arg; |
| size = &size_val; |
| |
| if (smu->ppt_funcs->read_sensor) |
| if (!smu->ppt_funcs->read_sensor(smu, sensor, data, size)) |
| goto unlock; |
| |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_STABLE_PSTATE_SCLK: |
| *((uint32_t *)data) = pstate_table->gfxclk_pstate.standard * 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_STABLE_PSTATE_MCLK: |
| *((uint32_t *)data) = pstate_table->uclk_pstate.standard * 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_PEAK_PSTATE_SCLK: |
| *((uint32_t *)data) = pstate_table->gfxclk_pstate.peak * 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_PEAK_PSTATE_MCLK: |
| *((uint32_t *)data) = pstate_table->uclk_pstate.peak * 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_ENABLED_SMC_FEATURES_MASK: |
| ret = smu_feature_get_enabled_mask(smu, (uint64_t *)data); |
| *size = 8; |
| break; |
| case AMDGPU_PP_SENSOR_UVD_POWER: |
| *(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UVD_BIT) ? 1 : 0; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_VCE_POWER: |
| *(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_DPM_VCE_BIT) ? 1 : 0; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_VCN_POWER_STATE: |
| *(uint32_t *)data = atomic_read(&smu->smu_power.power_gate.vcn_gated) ? 0 : 1; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_MIN_FAN_RPM: |
| *(uint32_t *)data = 0; |
| *size = 4; |
| break; |
| default: |
| *size = 0; |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| unlock: |
| // assign uint32_t to int |
| *size_arg = size_val; |
| |
| return ret; |
| } |
| |
| static int smu_get_apu_thermal_limit(void *handle, uint32_t *limit) |
| { |
| int ret = -EOPNOTSUPP; |
| struct smu_context *smu = handle; |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->get_apu_thermal_limit) |
| ret = smu->ppt_funcs->get_apu_thermal_limit(smu, limit); |
| |
| return ret; |
| } |
| |
| static int smu_set_apu_thermal_limit(void *handle, uint32_t limit) |
| { |
| int ret = -EOPNOTSUPP; |
| struct smu_context *smu = handle; |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->set_apu_thermal_limit) |
| ret = smu->ppt_funcs->set_apu_thermal_limit(smu, limit); |
| |
| return ret; |
| } |
| |
| static int smu_get_power_profile_mode(void *handle, char *buf) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || |
| !smu->ppt_funcs->get_power_profile_mode) |
| return -EOPNOTSUPP; |
| if (!buf) |
| return -EINVAL; |
| |
| return smu->ppt_funcs->get_power_profile_mode(smu, buf); |
| } |
| |
| static int smu_set_power_profile_mode(void *handle, |
| long *param, |
| uint32_t param_size) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || |
| !smu->ppt_funcs->set_power_profile_mode) |
| return -EOPNOTSUPP; |
| |
| return smu_bump_power_profile_mode(smu, param, param_size); |
| } |
| |
| static int smu_get_fan_control_mode(void *handle, u32 *fan_mode) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->get_fan_control_mode) |
| return -EOPNOTSUPP; |
| |
| if (!fan_mode) |
| return -EINVAL; |
| |
| *fan_mode = smu->ppt_funcs->get_fan_control_mode(smu); |
| |
| return 0; |
| } |
| |
| static int smu_set_fan_control_mode(void *handle, u32 value) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->set_fan_control_mode) |
| return -EOPNOTSUPP; |
| |
| if (value == U32_MAX) |
| return -EINVAL; |
| |
| ret = smu->ppt_funcs->set_fan_control_mode(smu, value); |
| if (ret) |
| goto out; |
| |
| if (!(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { |
| smu->user_dpm_profile.fan_mode = value; |
| |
| /* reset user dpm fan speed */ |
| if (value != AMD_FAN_CTRL_MANUAL) { |
| smu->user_dpm_profile.fan_speed_pwm = 0; |
| smu->user_dpm_profile.fan_speed_rpm = 0; |
| smu->user_dpm_profile.flags &= ~(SMU_CUSTOM_FAN_SPEED_RPM | SMU_CUSTOM_FAN_SPEED_PWM); |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static int smu_get_fan_speed_pwm(void *handle, u32 *speed) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->get_fan_speed_pwm) |
| return -EOPNOTSUPP; |
| |
| if (!speed) |
| return -EINVAL; |
| |
| ret = smu->ppt_funcs->get_fan_speed_pwm(smu, speed); |
| |
| return ret; |
| } |
| |
| static int smu_set_fan_speed_pwm(void *handle, u32 speed) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->set_fan_speed_pwm) |
| return -EOPNOTSUPP; |
| |
| if (speed == U32_MAX) |
| return -EINVAL; |
| |
| ret = smu->ppt_funcs->set_fan_speed_pwm(smu, speed); |
| if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { |
| smu->user_dpm_profile.flags |= SMU_CUSTOM_FAN_SPEED_PWM; |
| smu->user_dpm_profile.fan_speed_pwm = speed; |
| |
| /* Override custom RPM setting as they cannot co-exist */ |
| smu->user_dpm_profile.flags &= ~SMU_CUSTOM_FAN_SPEED_RPM; |
| smu->user_dpm_profile.fan_speed_rpm = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int smu_get_fan_speed_rpm(void *handle, uint32_t *speed) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->get_fan_speed_rpm) |
| return -EOPNOTSUPP; |
| |
| if (!speed) |
| return -EINVAL; |
| |
| ret = smu->ppt_funcs->get_fan_speed_rpm(smu, speed); |
| |
| return ret; |
| } |
| |
| static int smu_set_deep_sleep_dcefclk(void *handle, uint32_t clk) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| return smu_set_min_dcef_deep_sleep(smu, clk); |
| } |
| |
| static int smu_get_clock_by_type_with_latency(void *handle, |
| enum amd_pp_clock_type type, |
| struct pp_clock_levels_with_latency *clocks) |
| { |
| struct smu_context *smu = handle; |
| enum smu_clk_type clk_type; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->get_clock_by_type_with_latency) { |
| switch (type) { |
| case amd_pp_sys_clock: |
| clk_type = SMU_GFXCLK; |
| break; |
| case amd_pp_mem_clock: |
| clk_type = SMU_MCLK; |
| break; |
| case amd_pp_dcef_clock: |
| clk_type = SMU_DCEFCLK; |
| break; |
| case amd_pp_disp_clock: |
| clk_type = SMU_DISPCLK; |
| break; |
| default: |
| dev_err(smu->adev->dev, "Invalid clock type!\n"); |
| return -EINVAL; |
| } |
| |
| ret = smu->ppt_funcs->get_clock_by_type_with_latency(smu, clk_type, clocks); |
| } |
| |
| return ret; |
| } |
| |
| static int smu_display_clock_voltage_request(void *handle, |
| struct pp_display_clock_request *clock_req) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->display_clock_voltage_request) |
| ret = smu->ppt_funcs->display_clock_voltage_request(smu, clock_req); |
| |
| return ret; |
| } |
| |
| |
| static int smu_display_disable_memory_clock_switch(void *handle, |
| bool disable_memory_clock_switch) |
| { |
| struct smu_context *smu = handle; |
| int ret = -EINVAL; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->display_disable_memory_clock_switch) |
| ret = smu->ppt_funcs->display_disable_memory_clock_switch(smu, disable_memory_clock_switch); |
| |
| return ret; |
| } |
| |
| static int smu_set_xgmi_pstate(void *handle, |
| uint32_t pstate) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->set_xgmi_pstate) |
| ret = smu->ppt_funcs->set_xgmi_pstate(smu, pstate); |
| |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to set XGMI pstate!\n"); |
| |
| return ret; |
| } |
| |
| static int smu_get_baco_capability(void *handle) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled) |
| return false; |
| |
| if (!smu->ppt_funcs || !smu->ppt_funcs->get_bamaco_support) |
| return false; |
| |
| return smu->ppt_funcs->get_bamaco_support(smu); |
| } |
| |
| static int smu_baco_set_state(void *handle, int state) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (state == 0) { |
| if (smu->ppt_funcs->baco_exit) |
| ret = smu->ppt_funcs->baco_exit(smu); |
| } else if (state == 1) { |
| if (smu->ppt_funcs->baco_enter) |
| ret = smu->ppt_funcs->baco_enter(smu); |
| } else { |
| return -EINVAL; |
| } |
| |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to %s BACO state!\n", |
| (state)?"enter":"exit"); |
| |
| return ret; |
| } |
| |
| bool smu_mode1_reset_is_support(struct smu_context *smu) |
| { |
| bool ret = false; |
| |
| if (!smu->pm_enabled) |
| return false; |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->mode1_reset_is_support) |
| ret = smu->ppt_funcs->mode1_reset_is_support(smu); |
| |
| return ret; |
| } |
| |
| bool smu_mode2_reset_is_support(struct smu_context *smu) |
| { |
| bool ret = false; |
| |
| if (!smu->pm_enabled) |
| return false; |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->mode2_reset_is_support) |
| ret = smu->ppt_funcs->mode2_reset_is_support(smu); |
| |
| return ret; |
| } |
| |
| int smu_mode1_reset(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| if (!smu->pm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->mode1_reset) |
| ret = smu->ppt_funcs->mode1_reset(smu); |
| |
| return ret; |
| } |
| |
| static int smu_mode2_reset(void *handle) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->mode2_reset) |
| ret = smu->ppt_funcs->mode2_reset(smu); |
| |
| if (ret) |
| dev_err(smu->adev->dev, "Mode2 reset failed!\n"); |
| |
| return ret; |
| } |
| |
| static int smu_enable_gfx_features(void *handle) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->enable_gfx_features) |
| ret = smu->ppt_funcs->enable_gfx_features(smu); |
| |
| if (ret) |
| dev_err(smu->adev->dev, "enable gfx features failed!\n"); |
| |
| return ret; |
| } |
| |
| static int smu_get_max_sustainable_clocks_by_dc(void *handle, |
| struct pp_smu_nv_clock_table *max_clocks) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->get_max_sustainable_clocks_by_dc) |
| ret = smu->ppt_funcs->get_max_sustainable_clocks_by_dc(smu, max_clocks); |
| |
| return ret; |
| } |
| |
| static int smu_get_uclk_dpm_states(void *handle, |
| unsigned int *clock_values_in_khz, |
| unsigned int *num_states) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->get_uclk_dpm_states) |
| ret = smu->ppt_funcs->get_uclk_dpm_states(smu, clock_values_in_khz, num_states); |
| |
| return ret; |
| } |
| |
| static enum amd_pm_state_type smu_get_current_power_state(void *handle) |
| { |
| struct smu_context *smu = handle; |
| enum amd_pm_state_type pm_state = POWER_STATE_TYPE_DEFAULT; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->get_current_power_state) |
| pm_state = smu->ppt_funcs->get_current_power_state(smu); |
| |
| return pm_state; |
| } |
| |
| static int smu_get_dpm_clock_table(void *handle, |
| struct dpm_clocks *clock_table) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->get_dpm_clock_table) |
| ret = smu->ppt_funcs->get_dpm_clock_table(smu, clock_table); |
| |
| return ret; |
| } |
| |
| static ssize_t smu_sys_get_gpu_metrics(void *handle, void **table) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->get_gpu_metrics) |
| return -EOPNOTSUPP; |
| |
| return smu->ppt_funcs->get_gpu_metrics(smu, table); |
| } |
| |
| static ssize_t smu_sys_get_pm_metrics(void *handle, void *pm_metrics, |
| size_t size) |
| { |
| struct smu_context *smu = handle; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (!smu->ppt_funcs->get_pm_metrics) |
| return -EOPNOTSUPP; |
| |
| return smu->ppt_funcs->get_pm_metrics(smu, pm_metrics, size); |
| } |
| |
| static int smu_enable_mgpu_fan_boost(void *handle) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) |
| return -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs->enable_mgpu_fan_boost) |
| ret = smu->ppt_funcs->enable_mgpu_fan_boost(smu); |
| |
| return ret; |
| } |
| |
| static int smu_gfx_state_change_set(void *handle, |
| uint32_t state) |
| { |
| struct smu_context *smu = handle; |
| int ret = 0; |
| |
| if (smu->ppt_funcs->gfx_state_change_set) |
| ret = smu->ppt_funcs->gfx_state_change_set(smu, state); |
| |
| return ret; |
| } |
| |
| int smu_handle_passthrough_sbr(struct smu_context *smu, bool enable) |
| { |
| int ret = 0; |
| |
| if (smu->ppt_funcs->smu_handle_passthrough_sbr) |
| ret = smu->ppt_funcs->smu_handle_passthrough_sbr(smu, enable); |
| |
| return ret; |
| } |
| |
| int smu_get_ecc_info(struct smu_context *smu, void *umc_ecc) |
| { |
| int ret = -EOPNOTSUPP; |
| |
| if (smu->ppt_funcs && |
| smu->ppt_funcs->get_ecc_info) |
| ret = smu->ppt_funcs->get_ecc_info(smu, umc_ecc); |
| |
| return ret; |
| |
| } |
| |
| static int smu_get_prv_buffer_details(void *handle, void **addr, size_t *size) |
| { |
| struct smu_context *smu = handle; |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *memory_pool = &smu_table->memory_pool; |
| |
| if (!addr || !size) |
| return -EINVAL; |
| |
| *addr = NULL; |
| *size = 0; |
| if (memory_pool->bo) { |
| *addr = memory_pool->cpu_addr; |
| *size = memory_pool->size; |
| } |
| |
| return 0; |
| } |
| |
| static void smu_print_dpm_policy(struct smu_dpm_policy *policy, char *sysbuf, |
| size_t *size) |
| { |
| size_t offset = *size; |
| int level; |
| |
| for_each_set_bit(level, &policy->level_mask, PP_POLICY_MAX_LEVELS) { |
| if (level == policy->current_level) |
| offset += sysfs_emit_at(sysbuf, offset, |
| "%d : %s*\n", level, |
| policy->desc->get_desc(policy, level)); |
| else |
| offset += sysfs_emit_at(sysbuf, offset, |
| "%d : %s\n", level, |
| policy->desc->get_desc(policy, level)); |
| } |
| |
| *size = offset; |
| } |
| |
| ssize_t smu_get_pm_policy_info(struct smu_context *smu, |
| enum pp_pm_policy p_type, char *sysbuf) |
| { |
| struct smu_dpm_context *dpm_ctxt = &smu->smu_dpm; |
| struct smu_dpm_policy_ctxt *policy_ctxt; |
| struct smu_dpm_policy *dpm_policy; |
| size_t offset = 0; |
| |
| policy_ctxt = dpm_ctxt->dpm_policies; |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || !policy_ctxt || |
| !policy_ctxt->policy_mask) |
| return -EOPNOTSUPP; |
| |
| if (p_type == PP_PM_POLICY_NONE) |
| return -EINVAL; |
| |
| dpm_policy = smu_get_pm_policy(smu, p_type); |
| if (!dpm_policy || !dpm_policy->level_mask || !dpm_policy->desc) |
| return -ENOENT; |
| |
| if (!sysbuf) |
| return -EINVAL; |
| |
| smu_print_dpm_policy(dpm_policy, sysbuf, &offset); |
| |
| return offset; |
| } |
| |
| struct smu_dpm_policy *smu_get_pm_policy(struct smu_context *smu, |
| enum pp_pm_policy p_type) |
| { |
| struct smu_dpm_context *dpm_ctxt = &smu->smu_dpm; |
| struct smu_dpm_policy_ctxt *policy_ctxt; |
| int i; |
| |
| policy_ctxt = dpm_ctxt->dpm_policies; |
| if (!policy_ctxt) |
| return NULL; |
| |
| for (i = 0; i < hweight32(policy_ctxt->policy_mask); ++i) { |
| if (policy_ctxt->policies[i].policy_type == p_type) |
| return &policy_ctxt->policies[i]; |
| } |
| |
| return NULL; |
| } |
| |
| int smu_set_pm_policy(struct smu_context *smu, enum pp_pm_policy p_type, |
| int level) |
| { |
| struct smu_dpm_context *dpm_ctxt = &smu->smu_dpm; |
| struct smu_dpm_policy *dpm_policy = NULL; |
| struct smu_dpm_policy_ctxt *policy_ctxt; |
| int ret = -EOPNOTSUPP; |
| |
| policy_ctxt = dpm_ctxt->dpm_policies; |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || !policy_ctxt || |
| !policy_ctxt->policy_mask) |
| return ret; |
| |
| if (level < 0 || level >= PP_POLICY_MAX_LEVELS) |
| return -EINVAL; |
| |
| dpm_policy = smu_get_pm_policy(smu, p_type); |
| |
| if (!dpm_policy || !dpm_policy->level_mask || !dpm_policy->set_policy) |
| return ret; |
| |
| if (dpm_policy->current_level == level) |
| return 0; |
| |
| ret = dpm_policy->set_policy(smu, level); |
| |
| if (!ret) |
| dpm_policy->current_level = level; |
| |
| return ret; |
| } |
| |
| static const struct amd_pm_funcs swsmu_pm_funcs = { |
| /* export for sysfs */ |
| .set_fan_control_mode = smu_set_fan_control_mode, |
| .get_fan_control_mode = smu_get_fan_control_mode, |
| .set_fan_speed_pwm = smu_set_fan_speed_pwm, |
| .get_fan_speed_pwm = smu_get_fan_speed_pwm, |
| .force_clock_level = smu_force_ppclk_levels, |
| .print_clock_levels = smu_print_ppclk_levels, |
| .emit_clock_levels = smu_emit_ppclk_levels, |
| .force_performance_level = smu_force_performance_level, |
| .read_sensor = smu_read_sensor, |
| .get_apu_thermal_limit = smu_get_apu_thermal_limit, |
| .set_apu_thermal_limit = smu_set_apu_thermal_limit, |
| .get_performance_level = smu_get_performance_level, |
| .get_current_power_state = smu_get_current_power_state, |
| .get_fan_speed_rpm = smu_get_fan_speed_rpm, |
| .set_fan_speed_rpm = smu_set_fan_speed_rpm, |
| .get_pp_num_states = smu_get_power_num_states, |
| .get_pp_table = smu_sys_get_pp_table, |
| .set_pp_table = smu_sys_set_pp_table, |
| .switch_power_profile = smu_switch_power_profile, |
| /* export to amdgpu */ |
| .dispatch_tasks = smu_handle_dpm_task, |
| .load_firmware = smu_load_microcode, |
| .set_powergating_by_smu = smu_dpm_set_power_gate, |
| .set_power_limit = smu_set_power_limit, |
| .get_power_limit = smu_get_power_limit, |
| .get_power_profile_mode = smu_get_power_profile_mode, |
| .set_power_profile_mode = smu_set_power_profile_mode, |
| .odn_edit_dpm_table = smu_od_edit_dpm_table, |
| .set_mp1_state = smu_set_mp1_state, |
| .gfx_state_change_set = smu_gfx_state_change_set, |
| /* export to DC */ |
| .get_sclk = smu_get_sclk, |
| .get_mclk = smu_get_mclk, |
| .display_configuration_change = smu_display_configuration_change, |
| .get_clock_by_type_with_latency = smu_get_clock_by_type_with_latency, |
| .display_clock_voltage_request = smu_display_clock_voltage_request, |
| .enable_mgpu_fan_boost = smu_enable_mgpu_fan_boost, |
| .set_active_display_count = smu_set_display_count, |
| .set_min_deep_sleep_dcefclk = smu_set_deep_sleep_dcefclk, |
| .get_asic_baco_capability = smu_get_baco_capability, |
| .set_asic_baco_state = smu_baco_set_state, |
| .get_ppfeature_status = smu_sys_get_pp_feature_mask, |
| .set_ppfeature_status = smu_sys_set_pp_feature_mask, |
| .asic_reset_mode_2 = smu_mode2_reset, |
| .asic_reset_enable_gfx_features = smu_enable_gfx_features, |
| .set_df_cstate = smu_set_df_cstate, |
| .set_xgmi_pstate = smu_set_xgmi_pstate, |
| .get_gpu_metrics = smu_sys_get_gpu_metrics, |
| .get_pm_metrics = smu_sys_get_pm_metrics, |
| .set_watermarks_for_clock_ranges = smu_set_watermarks_for_clock_ranges, |
| .display_disable_memory_clock_switch = smu_display_disable_memory_clock_switch, |
| .get_max_sustainable_clocks_by_dc = smu_get_max_sustainable_clocks_by_dc, |
| .get_uclk_dpm_states = smu_get_uclk_dpm_states, |
| .get_dpm_clock_table = smu_get_dpm_clock_table, |
| .get_smu_prv_buf_details = smu_get_prv_buffer_details, |
| }; |
| |
| int smu_wait_for_event(struct smu_context *smu, enum smu_event_type event, |
| uint64_t event_arg) |
| { |
| int ret = -EINVAL; |
| |
| if (smu->ppt_funcs->wait_for_event) |
| ret = smu->ppt_funcs->wait_for_event(smu, event, event_arg); |
| |
| return ret; |
| } |
| |
| int smu_stb_collect_info(struct smu_context *smu, void *buf, uint32_t size) |
| { |
| |
| if (!smu->ppt_funcs->stb_collect_info || !smu->stb_context.enabled) |
| return -EOPNOTSUPP; |
| |
| /* Confirm the buffer allocated is of correct size */ |
| if (size != smu->stb_context.stb_buf_size) |
| return -EINVAL; |
| |
| /* |
| * No need to lock smu mutex as we access STB directly through MMIO |
| * and not going through SMU messaging route (for now at least). |
| * For registers access rely on implementation internal locking. |
| */ |
| return smu->ppt_funcs->stb_collect_info(smu, buf, size); |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| |
| static int smu_stb_debugfs_open(struct inode *inode, struct file *filp) |
| { |
| struct amdgpu_device *adev = filp->f_inode->i_private; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| unsigned char *buf; |
| int r; |
| |
| buf = kvmalloc_array(smu->stb_context.stb_buf_size, sizeof(*buf), GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| r = smu_stb_collect_info(smu, buf, smu->stb_context.stb_buf_size); |
| if (r) |
| goto out; |
| |
| filp->private_data = buf; |
| |
| return 0; |
| |
| out: |
| kvfree(buf); |
| return r; |
| } |
| |
| static ssize_t smu_stb_debugfs_read(struct file *filp, char __user *buf, size_t size, |
| loff_t *pos) |
| { |
| struct amdgpu_device *adev = filp->f_inode->i_private; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| |
| |
| if (!filp->private_data) |
| return -EINVAL; |
| |
| return simple_read_from_buffer(buf, |
| size, |
| pos, filp->private_data, |
| smu->stb_context.stb_buf_size); |
| } |
| |
| static int smu_stb_debugfs_release(struct inode *inode, struct file *filp) |
| { |
| kvfree(filp->private_data); |
| filp->private_data = NULL; |
| |
| return 0; |
| } |
| |
| /* |
| * We have to define not only read method but also |
| * open and release because .read takes up to PAGE_SIZE |
| * data each time so and so is invoked multiple times. |
| * We allocate the STB buffer in .open and release it |
| * in .release |
| */ |
| static const struct file_operations smu_stb_debugfs_fops = { |
| .owner = THIS_MODULE, |
| .open = smu_stb_debugfs_open, |
| .read = smu_stb_debugfs_read, |
| .release = smu_stb_debugfs_release, |
| .llseek = default_llseek, |
| }; |
| |
| #endif |
| |
| void amdgpu_smu_stb_debug_fs_init(struct amdgpu_device *adev) |
| { |
| #if defined(CONFIG_DEBUG_FS) |
| |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| |
| if (!smu || (!smu->stb_context.stb_buf_size)) |
| return; |
| |
| debugfs_create_file_size("amdgpu_smu_stb_dump", |
| S_IRUSR, |
| adev_to_drm(adev)->primary->debugfs_root, |
| adev, |
| &smu_stb_debugfs_fops, |
| smu->stb_context.stb_buf_size); |
| #endif |
| } |
| |
| int smu_send_hbm_bad_pages_num(struct smu_context *smu, uint32_t size) |
| { |
| int ret = 0; |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->send_hbm_bad_pages_num) |
| ret = smu->ppt_funcs->send_hbm_bad_pages_num(smu, size); |
| |
| return ret; |
| } |
| |
| int smu_send_hbm_bad_channel_flag(struct smu_context *smu, uint32_t size) |
| { |
| int ret = 0; |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->send_hbm_bad_channel_flag) |
| ret = smu->ppt_funcs->send_hbm_bad_channel_flag(smu, size); |
| |
| return ret; |
| } |
| |
| int smu_send_rma_reason(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| if (smu->ppt_funcs && smu->ppt_funcs->send_rma_reason) |
| ret = smu->ppt_funcs->send_rma_reason(smu); |
| |
| return ret; |
| } |