mx5: enable usb gadget for freescale mx51 babbage board
This patch enables usb gadget for freescale mx51 babbage hw. By default,
the OTG port will be in device mode. To put the OTG port into Host mode,
pass "otg_mode=host" in the exec command.
This patch applies to 2.6.34-rc7.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 99f7ea9..dacf506 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -15,6 +15,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/fsl_devices.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -179,12 +180,32 @@
.flags = MXC_EHCI_INTERNAL_PHY,
};
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
+};
+
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
+static int otg_mode_host;
+
+static int __init babbage_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", babbage_otg_mode);
+
/*
* Board specific initialization.
*/
@@ -197,7 +218,12 @@
mxc_init_imx_uart();
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ if (otg_mode_host)
+ mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ else {
+ initialize_otg_port(NULL);
+ mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ }
gpio_usbh1_active();
mxc_register_device(&mxc_usbh1_device, &usbh1_config);
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 566cfda..9b93de3 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -818,6 +818,8 @@
_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index e6262f3..23850e6 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -107,6 +107,18 @@
},
};
+/* OTG gadget device */
+struct platform_device mxc_usbdr_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(usbotg_resources),
+ .resource = usbotg_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
struct platform_device mxc_usbdr_host_device = {
.name = "mxc-ehci",
.id = 0,
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index 95c45f9..0494d6b 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -4,3 +4,4 @@
extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_usbdr_host_device;
extern struct platform_device mxc_usbh1_device;
+extern struct platform_device mxc_usbdr_udc_device;
